Merge tag 'mmc-v4.7' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add TRACE support to be able to debug request flow
   - Extend/improve reset support for (e)MMC
   - Convert MMC pwrseq to platform device drivers
   - Use IDA for indexes
   - Some additional minor improvements

  MMC host:
   - sdhci: Re-factoring, clean-ups and improvements
   - sdhci-acpi|pci: Use MMC_CAP_AGGRESSIVE_PM for Broxton
   - omap/omap_hsmmc: Convert to use dma_request_chan()
   - usdhi6rol0: Add support for UHS modes
   - sh_mmcif: Update runtime PM support
   - tmio: Wolfram Sang steps in as maintainer
   - tmio: Add UHS-I mode support
   - sh_mobile_sdhi: Add UHS-I mode support
   - tmio/sdhi: Re-factoring, clean-ups and improvements
   - dw_mmc: Re-factoring and clean-ups
   - davinci: Convert to use dma_request_chan()"

* tag 'mmc-v4.7' of git://git.linaro.org/people/ulf.hansson/mmc: (99 commits)
  mmc: mmc: Fix partition switch timeout for some eMMCs
  mmc: sh_mobile_sdhi: enable SDIO IRQs for RCar Gen3
  mmc: sdio: fall back to SDIO 1.0 for broken 1.1 cards
  mmc: sdhci-st: correct name of sd-uhs-sdr50 property
  MAINTAINERS: update entry for TMIO MMC driver
  mmc: block: improve logging of handling emmc timeouts
  mmc: sdhci: removed unneeded function wrappers
  mmc: core: remove the invalid message in mmc_select_timing
  mmc: core: fix using wrong io voltage if mmc_select_hs200 fails
  mmc: sdhci-of-arasan: fix set_clock when a phy is supported
  mmc: omap: Use dma_request_chan() for requesting DMA channel
  mmc: mmc: Attempt to flush cache before reset
  mmc: sh_mobile_sdhi: check return value when changing clk
  mmc: sh_mobile_sdhi: only change the clock on RCar Gen2+
  mmc: tmio/sdhi: introduce flag for RCar 2+ specific features
  mmc: sh_mobile_sdhi: make clk_update function more compact
  mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel
  mmc: sdhci-of-at91: add presets setup
  mmc: usdhi6rol0: add pinctrl to set pin drive strength
  mmc: usdhi6rol0: add support for UHS modes
  ...

1 files changed, 27 insertions, 47 deletions

diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index d9a655f47d41..dd64b8663984 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -248,7 +248,6 @@ struct sh_mmcif_host {
 	int sg_idx;
 	int sg_blkidx;
 	bool power;
-	bool card_present;
 	bool ccs_enable;		/* Command Completion Signal support */
 	bool clk_ctrl2_enable;
 	struct mutex thread_lock;
@@ -1064,16 +1063,6 @@ static void sh_mmcif_clk_setup(struct sh_mmcif_host *host)
 		host->mmc->f_max, host->mmc->f_min);
 }
 
-static void sh_mmcif_set_power(struct sh_mmcif_host *host, struct mmc_ios *ios)
-{
-	struct mmc_host *mmc = host->mmc;
-
-	if (!IS_ERR(mmc->supply.vmmc))
-		/* Errors ignored... */
-		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
-				      ios->power_mode ? ios->vdd : 0);
-}
-
 static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct sh_mmcif_host *host = mmc_priv(mmc);
@@ -1091,42 +1080,32 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	host->state = STATE_IOS;
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	if (ios->power_mode == MMC_POWER_UP) {
-		if (!host->card_present) {
-			/* See if we also get DMA */
+	switch (ios->power_mode) {
+	case MMC_POWER_UP:
+		if (!IS_ERR(mmc->supply.vmmc))
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
+		if (!host->power) {
+			clk_prepare_enable(host->clk);
+			pm_runtime_get_sync(dev);
+			sh_mmcif_sync_reset(host);
 			sh_mmcif_request_dma(host);
-			host->card_present = true;
-		}
-		sh_mmcif_set_power(host, ios);
-	} else if (ios->power_mode == MMC_POWER_OFF || !ios->clock) {
-		/* clock stop */
-		sh_mmcif_clock_control(host, 0);
-		if (ios->power_mode == MMC_POWER_OFF) {
-			if (host->card_present) {
-				sh_mmcif_release_dma(host);
-				host->card_present = false;
-			}
+			host->power = true;
 		}
+		break;
+	case MMC_POWER_OFF:
+		if (!IS_ERR(mmc->supply.vmmc))
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
 		if (host->power) {
-			pm_runtime_put_sync(dev);
+			sh_mmcif_clock_control(host, 0);
+			sh_mmcif_release_dma(host);
+			pm_runtime_put(dev);
 			clk_disable_unprepare(host->clk);
 			host->power = false;
-			if (ios->power_mode == MMC_POWER_OFF)
-				sh_mmcif_set_power(host, ios);
-		}
-		host->state = STATE_IDLE;
-		return;
-	}
-
-	if (ios->clock) {
-		if (!host->power) {
-			clk_prepare_enable(host->clk);
-
-			pm_runtime_get_sync(dev);
-			host->power = true;
-			sh_mmcif_sync_reset(host);
 		}
+		break;
+	case MMC_POWER_ON:
 		sh_mmcif_clock_control(host, ios->clock);
+		break;
 	}
 
 	host->timing = ios->timing;
@@ -1519,23 +1498,23 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, host);
 
-	pm_runtime_enable(dev);
-	host->power = false;
-
 	host->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
 		dev_err(dev, "cannot get clock: %d\n", ret);
-		goto err_pm;
+		goto err_host;
 	}
 
 	ret = clk_prepare_enable(host->clk);
 	if (ret < 0)
-		goto err_pm;
+		goto err_host;
 
 	sh_mmcif_clk_setup(host);
 
-	ret = pm_runtime_resume(dev);
+	pm_runtime_enable(dev);
+	host->power = false;
+
+	ret = pm_runtime_get_sync(dev);
 	if (ret < 0)
 		goto err_clk;
 
@@ -1579,12 +1558,13 @@ static int sh_mmcif_probe(struct platform_device *pdev)
 		 sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0xffff,
 		 clk_get_rate(host->clk) / 1000000UL);
 
+	pm_runtime_put(dev);
 	clk_disable_unprepare(host->clk);
 	return ret;
 
 err_clk:
 	clk_disable_unprepare(host->clk);
-err_pm:
+	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 err_host:
 	mmc_free_host(mmc);