diff options
| author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2021-12-19 16:34:41 +0100 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2021-12-20 11:14:56 +0100 |
| commit | f89b548ca66be7500dcd92ee8e61590f7d08ac91 (patch) | |
| tree | 59ddc47e2edb6a6fc103e4ec4ebe3063f246a2b6 /drivers/mmc | |
| parent | 66c915d09b942fb3b2b0cb2f56562180901fba17 (diff) | |
mmc: meson-mx-sdhc: Set MANUAL_STOP for multi-block SDIO commands
The vendor driver implements special handling for multi-block
SD_IO_RW_EXTENDED (and SD_IO_RW_DIRECT) commands which have data
attached to them. It sets the MANUAL_STOP bit in the MESON_SDHC_MISC
register for these commands. In all other cases this bit is cleared.
Here we omit SD_IO_RW_DIRECT since that command never has any data
attached to it.
This fixes SDIO wifi using the brcmfmac driver which reported the
following error without this change on a Netxeon S82 board using a
Meson8 (S802) SoC:
brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip
BCM43362/1
brcmf_sdiod_ramrw: membytes transfer failed
brcmf_sdio_download_code_file: error -110 on writing 219557 membytes
at 0x00000000
brcmf_sdio_download_firmware: dongle image file download failed
And with this change:
brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip
BCM43362/1
brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may
have limited channels available
brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00
version 5.90.195.89.6 FWID 01-b30a427d
Fixes: e4bf1b0970ef96 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211219153442.463863-2-martin.blumenstingl@googlemail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/meson-mx-sdhc-mmc.c | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/drivers/mmc/host/meson-mx-sdhc-mmc.c b/drivers/mmc/host/meson-mx-sdhc-mmc.c index 7cd9c0ec2fcf..8fdd0bbbfa21 100644 --- a/drivers/mmc/host/meson-mx-sdhc-mmc.c +++ b/drivers/mmc/host/meson-mx-sdhc-mmc.c @@ -135,6 +135,7 @@ static void meson_mx_sdhc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) { struct meson_mx_sdhc_host *host = mmc_priv(mmc); + bool manual_stop = false; u32 ictl, send; int pack_len; @@ -172,12 +173,27 @@ static void meson_mx_sdhc_start_cmd(struct mmc_host *mmc, else /* software flush: */ ictl |= MESON_SDHC_ICTL_DATA_XFER_OK; + + /* + * Mimic the logic from the vendor driver where (only) + * SD_IO_RW_EXTENDED commands with more than one block set the + * MESON_SDHC_MISC_MANUAL_STOP bit. This fixes the firmware + * download in the brcmfmac driver for a BCM43362/1 card. + * Without this sdio_memcpy_toio() (with a size of 219557 + * bytes) times out if MESON_SDHC_MISC_MANUAL_STOP is not set. + */ + manual_stop = cmd->data->blocks > 1 && + cmd->opcode == SD_IO_RW_EXTENDED; } else { pack_len = 0; ictl |= MESON_SDHC_ICTL_RESP_OK; } + regmap_update_bits(host->regmap, MESON_SDHC_MISC, + MESON_SDHC_MISC_MANUAL_STOP, + manual_stop ? MESON_SDHC_MISC_MANUAL_STOP : 0); + if (cmd->opcode == MMC_STOP_TRANSMISSION) send |= MESON_SDHC_SEND_DATA_STOP; |