Merge tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd

Pull MTD updates from Richard Weinberger:
 "General changes:
   -  Unconfuse get_unmapped_area and point/unpoint driver methods
   -  New partition parser: sharpslpart
   -  Kill GENERIC_IO
   -  Various fixes

  NAND changes:
   -  Add a flag to mark NANDs that require 3 address cycles to encode a
      page address
   -  Set a default ECC/free layout when NAND_ECC_NONE is requested
   -  Fix a bug in panic_nand_write()
   -  Another batch of cleanups for the denali driver
   -  Fix PM support in the atmel driver
   -  Remove support for platform data in the omap driver
   -  Fix subpage write in the omap driver
   -  Fix irq handling in the mtk driver
   -  Change link order of mtk_ecc and mtk_nand drivers to speed up boot
      time
   -  Change log level of ECC error messages in the mxc driver
   -  Patch the pxa3xx driver to support Armada 8k platforms
   -  Add BAM DMA support to the qcom driver
   -  Convert gpio-nand to the GPIO desc API
   -  Fix ECC handling in the mt29f driver

  SPI-NOR changes:
   -  Introduce system power management support
   -  New mechanism to select the proper .quad_enable() hook by JEDEC
      ID, when needed, instead of only by manufacturer ID
   -  Add support to new memory parts from Gigadevice, Winbond, Macronix
      and Everspin
   -  Maintainance for Cadence, Intel, Mediatek and STM32 drivers"

*  tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd: (85 commits)
  mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid
  mtd: sharpslpart: Add sharpslpart partition parser
  mtd: Add sanity checks in mtd_write/read_oob()
  mtd: remove the get_unmapped_area method
  mtd: implement mtd_get_unmapped_area() using the point method
  mtd: chips/map_rom.c: implement point and unpoint methods
  mtd: chips/map_ram.c: implement point and unpoint methods
  mtd: mtdram: properly handle the phys argument in the point method
  mtd: mtdswap: fix spelling mistake: 'TRESHOLD' -> 'THRESHOLD'
  mtd: slram: use memremap() instead of ioremap()
  kconfig: kill off GENERIC_IO option
  mtd: Fix C++ comment in include/linux/mtd/mtd.h
  mtd: constify mtd_partition
  mtd: plat-ram: Replace manual resource management by devm
  mtd: nand: Fix writing mtdoops to nand flash.
  mtd: intel-spi: Add Intel Lewisburg PCH SPI super SKU PCI ID
  mtd: nand: mtk: fix infinite ECC decode IRQ issue
  mtd: spi-nor: Add support for mr25h128
  mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.o
  mtd: spi-nor: enable 4B opcodes for mx66l51235l
  ...

1 files changed, 26 insertions, 8 deletions

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 12edaae17d81..6135d007a068 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -115,7 +115,7 @@ static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 
-	if (section)
+	if (section || !ecc->total)
 		return -ERANGE;
 
 	oobregion->length = ecc->total;
@@ -727,8 +727,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command,
 		chip->cmd_ctrl(mtd, page_addr, ctrl);
 		ctrl &= ~NAND_CTRL_CHANGE;
 		chip->cmd_ctrl(mtd, page_addr >> 8, ctrl);
-		/* One more address cycle for devices > 32MiB */
-		if (chip->chipsize > (32 << 20))
+		if (chip->options & NAND_ROW_ADDR_3)
 			chip->cmd_ctrl(mtd, page_addr >> 16, ctrl);
 	}
 	chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
@@ -854,8 +853,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
 			chip->cmd_ctrl(mtd, page_addr, ctrl);
 			chip->cmd_ctrl(mtd, page_addr >> 8,
 				       NAND_NCE | NAND_ALE);
-			/* One more address cycle for devices > 128MiB */
-			if (chip->chipsize > (128 << 20))
+			if (chip->options & NAND_ROW_ADDR_3)
 				chip->cmd_ctrl(mtd, page_addr >> 16,
 					       NAND_NCE | NAND_ALE);
 		}
@@ -1246,6 +1244,7 @@ int nand_reset(struct nand_chip *chip, int chipnr)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(nand_reset);
 
 /**
  * nand_check_erased_buf - check if a buffer contains (almost) only 0xff data
@@ -2799,15 +2798,18 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 			    size_t *retlen, const uint8_t *buf)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
+	int chipnr = (int)(to >> chip->chip_shift);
 	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Wait for the device to get ready */
-	panic_nand_wait(mtd, chip, 400);
-
 	/* Grab the device */
 	panic_nand_get_device(chip, mtd, FL_WRITING);
 
+	chip->select_chip(mtd, chipnr);
+
+	/* Wait for the device to get ready */
+	panic_nand_wait(mtd, chip, 400);
+
 	memset(&ops, 0, sizeof(ops));
 	ops.len = len;
 	ops.datbuf = (uint8_t *)buf;
@@ -3999,6 +4001,9 @@ ident_done:
 		chip->chip_shift += 32 - 1;
 	}
 
+	if (chip->chip_shift - chip->page_shift > 16)
+		chip->options |= NAND_ROW_ADDR_3;
+
 	chip->badblockbits = 8;
 	chip->erase = single_erase;
 
@@ -4700,6 +4705,19 @@ int nand_scan_tail(struct mtd_info *mtd)
 			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops);
 			break;
 		default:
+			/*
+			 * Expose the whole OOB area to users if ECC_NONE
+			 * is passed. We could do that for all kind of
+			 * ->oobsize, but we must keep the old large/small
+			 * page with ECC layout when ->oobsize <= 128 for
+			 * compatibility reasons.
+			 */
+			if (ecc->mode == NAND_ECC_NONE) {
+				mtd_set_ooblayout(mtd,
+						&nand_ooblayout_lp_ops);
+				break;
+			}
+
 			WARN(1, "No oob scheme defined for oobsize %d\n",
 				mtd->oobsize);
 			ret = -EINVAL;