diff options
| author | Miquel Raynal <miquel.raynal@bootlin.com> | 2021-05-05 23:37:44 +0200 |
|---|---|---|
| committer | Miquel Raynal <miquel.raynal@bootlin.com> | 2021-05-26 10:51:00 +0200 |
| commit | f3fe156ede6db96a060cc98ff1bce1ee6417a68b (patch) | |
| tree | 8d2602c4f084100851b09c740b34c7b6c835a877 /drivers/mtd/nand/raw/nand_base.c | |
| parent | e32df79f19c756f072bd517ece65df1efd496f95 (diff) | |
mtd: rawnand: Support enabling NV-DDR through SET_FEATURES
Until now the parameter of the ADDR_TIMING_MODE feature was just the
ONFI timing mode (from 0 to 5) because we were only supporting the SDR
data interface. In the same byte, bits 4 and 5 indicate which data
interface is being configured so use them to set the right mode and also
read them back to ensure the right timing has been setup on the chip's
side.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-17-miquel.raynal@bootlin.com
Diffstat (limited to 'drivers/mtd/nand/raw/nand_base.c')
| -rw-r--r-- | drivers/mtd/nand/raw/nand_base.c | 18 |
1 files changed, 13 insertions, 5 deletions
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index b8a515a74379..cfe8257bf175 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -832,7 +832,7 @@ static int nand_reset_interface(struct nand_chip *chip, int chipnr) static int nand_setup_interface(struct nand_chip *chip, int chipnr) { const struct nand_controller_ops *ops = chip->controller->ops; - u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = { }; + u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = { }, request; int ret; if (!nand_controller_can_setup_interface(chip)) @@ -848,7 +848,12 @@ static int nand_setup_interface(struct nand_chip *chip, int chipnr) if (!chip->best_interface_config) return 0; - tmode_param[0] = chip->best_interface_config->timings.mode; + request = chip->best_interface_config->timings.mode; + if (nand_interface_is_sdr(chip->best_interface_config)) + request |= ONFI_DATA_INTERFACE_SDR; + else + request |= ONFI_DATA_INTERFACE_NVDDR; + tmode_param[0] = request; /* Change the mode on the chip side (if supported by the NAND chip) */ if (nand_supports_set_features(chip, ONFI_FEATURE_ADDR_TIMING_MODE)) { @@ -877,10 +882,13 @@ static int nand_setup_interface(struct nand_chip *chip, int chipnr) if (ret) goto err_reset_chip; - if (tmode_param[0] != chip->best_interface_config->timings.mode) { - pr_warn("timing mode %d not acknowledged by the NAND chip\n", + if (request != tmode_param[0]) { + pr_warn("%s timing mode %d not acknowledged by the NAND chip\n", + nand_interface_is_nvddr(chip->best_interface_config) ? "NV-DDR" : "SDR", chip->best_interface_config->timings.mode); - ret = 0; + pr_debug("NAND chip would work in %s timing mode %d\n", + tmode_param[0] & ONFI_DATA_INTERFACE_NVDDR ? "NV-DDR" : "SDR", + (unsigned int)ONFI_TIMING_MODE_PARAM(tmode_param[0])); goto err_reset_chip; } |