summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
authorBoris Brezillon <bbrezillon@kernel.org>2020-03-13 19:42:50 +0000
committerTudor Ambarus <tudor.ambarus@microchip.com>2020-03-17 09:28:06 +0200
commit2d47cac1eee76a75c28886c15f82323eb0ec0eb5 (patch)
tree25c8bd8eabccb198891af8abaf72219ff9b57411 /drivers/mtd
parentd82592572662bcca7684eeb84e68daad16d91524 (diff)
mtd: spi-nor: Move Xilinx bits out of core.c
Create a SPI NOR manufacturer driver for Xilinx chips, and move the Xilinx definitions outside of core.c. While at it, remove the SPI_S3AN flag which is now useless. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/spi-nor/Makefile1
-rw-r--r--drivers/mtd/spi-nor/core.c76
-rw-r--r--drivers/mtd/spi-nor/core.h13
-rw-r--r--drivers/mtd/spi-nor/xilinx.c94
4 files changed, 98 insertions, 86 deletions
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index cd8d95b727c9..fa03513dd160 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -15,4 +15,5 @@ spi-nor-objs += micron-st.o
spi-nor-objs += spansion.o
spi-nor-objs += sst.o
spi-nor-objs += winbond.o
+spi-nor-objs += xilinx.o
obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 99da7d8e9097..ca2f441e2806 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1095,26 +1095,6 @@ void spi_nor_unlock_and_unprep(struct spi_nor *nor)
mutex_unlock(&nor->lock);
}
-/*
- * This code converts an address to the Default Address Mode, that has non
- * power of two page sizes. We must support this mode because it is the default
- * mode supported by Xilinx tools, it can access the whole flash area and
- * changing over to the Power-of-two mode is irreversible and corrupts the
- * original data.
- * Addr can safely be unsigned int, the biggest S3AN device is smaller than
- * 4 MiB.
- */
-static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
-{
- u32 offset, page;
-
- offset = addr % nor->page_size;
- page = addr / nor->page_size;
- page <<= (nor->page_size > 512) ? 10 : 9;
-
- return page | offset;
-}
-
static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
{
if (!nor->params.convert_addr)
@@ -1963,13 +1943,6 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
* old entries may be missing 4K flag.
*/
static const struct flash_info spi_nor_ids[] = {
- /* Xilinx S3AN Internal Flash */
- { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
- { "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
- { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
- { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
- { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
-
/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
@@ -1992,6 +1965,7 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
&spi_nor_spansion,
&spi_nor_sst,
&spi_nor_winbond,
+ &spi_nor_xilinx,
};
static const struct flash_info *
@@ -2177,46 +2151,6 @@ static int spi_nor_check(struct spi_nor *nor)
return 0;
}
-static int s3an_nor_setup(struct spi_nor *nor,
- const struct spi_nor_hwcaps *hwcaps)
-{
- int ret;
-
- ret = spi_nor_xread_sr(nor, nor->bouncebuf);
- if (ret)
- return ret;
-
- nor->erase_opcode = SPINOR_OP_XSE;
- nor->program_opcode = SPINOR_OP_XPP;
- nor->read_opcode = SPINOR_OP_READ;
- nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
-
- /*
- * This flashes have a page size of 264 or 528 bytes (known as
- * Default addressing mode). It can be changed to a more standard
- * Power of two mode where the page size is 256/512. This comes
- * with a price: there is 3% less of space, the data is corrupted
- * and the page size cannot be changed back to default addressing
- * mode.
- *
- * The current addressing mode can be read from the XRDSR register
- * and should not be changed, because is a destructive operation.
- */
- if (nor->bouncebuf[0] & XSR_PAGESIZE) {
- /* Flash in Power of 2 mode */
- nor->page_size = (nor->page_size == 264) ? 256 : 512;
- nor->mtd.writebufsize = nor->page_size;
- nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors;
- nor->mtd.erasesize = 8 * nor->page_size;
- } else {
- /* Flash in Default addressing mode */
- nor->params.convert_addr = s3an_convert_addr;
- nor->mtd.erasesize = nor->info->sector_size;
- }
-
- return 0;
-}
-
static void
spi_nor_set_read_settings(struct spi_nor_read_command *read,
u8 num_mode_clocks,
@@ -2815,11 +2749,6 @@ static void spi_nor_info_init_params(struct spi_nor *nor)
spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
}
-static void s3an_post_sfdp_fixups(struct spi_nor *nor)
-{
- nor->params.setup = s3an_nor_setup;
-}
-
/**
* spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
* after SFDP has been parsed (is also called for SPI NORs that do not
@@ -2832,9 +2761,6 @@ static void s3an_post_sfdp_fixups(struct spi_nor *nor)
*/
static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
{
- if (nor->info->flags & SPI_S3AN)
- s3an_post_sfdp_fixups(nor);
-
if (nor->manufacturer && nor->manufacturer->fixups &&
nor->manufacturer->fixups->post_sfdp)
nor->manufacturer->fixups->post_sfdp(nor);
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index aaa2a460a159..8c666bff5768 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -73,16 +73,6 @@ struct flash_info {
#define SPI_NOR_XSR_RDY BIT(10) /*
* S3AN flashes have specific opcode to
* read the status register.
- * Flags SPI_NOR_XSR_RDY and SPI_S3AN
- * use the same bit as one implies the
- * other, but we will get rid of
- * SPI_S3AN soon.
- */
-#define SPI_S3AN BIT(10) /*
- * Xilinx Spartan 3AN In-System Flash
- * (MFR cannot be used for probing
- * because it has the same value as
- * ATMEL flashes)
*/
#define SPI_NOR_4B_OPCODES BIT(11) /*
* Use dedicated 4byte address op codes
@@ -150,7 +140,7 @@ struct flash_info {
.n_sectors = (_n_sectors), \
.page_size = _page_size, \
.addr_width = 3, \
- .flags = SPI_NOR_NO_FR | SPI_S3AN,
+ .flags = SPI_NOR_NO_FR | SPI_NOR_XSR_RDY,
/**
* struct spi_nor_manufacturer - SPI NOR manufacturer object
@@ -182,6 +172,7 @@ extern const struct spi_nor_manufacturer spi_nor_st;
extern const struct spi_nor_manufacturer spi_nor_spansion;
extern const struct spi_nor_manufacturer spi_nor_sst;
extern const struct spi_nor_manufacturer spi_nor_winbond;
+extern const struct spi_nor_manufacturer spi_nor_xilinx;
int spi_nor_write_enable(struct spi_nor *nor);
int spi_nor_write_disable(struct spi_nor *nor);
diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
new file mode 100644
index 000000000000..fcf635d89f65
--- /dev/null
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info xilinx_parts[] = {
+ /* Xilinx S3AN Internal Flash */
+ { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
+ { "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
+ { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
+ { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
+ { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
+};
+
+/*
+ * This code converts an address to the Default Address Mode, that has non
+ * power of two page sizes. We must support this mode because it is the default
+ * mode supported by Xilinx tools, it can access the whole flash area and
+ * changing over to the Power-of-two mode is irreversible and corrupts the
+ * original data.
+ * Addr can safely be unsigned int, the biggest S3AN device is smaller than
+ * 4 MiB.
+ */
+static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
+{
+ u32 offset, page;
+
+ offset = addr % nor->page_size;
+ page = addr / nor->page_size;
+ page <<= (nor->page_size > 512) ? 10 : 9;
+
+ return page | offset;
+}
+
+static int xilinx_nor_setup(struct spi_nor *nor,
+ const struct spi_nor_hwcaps *hwcaps)
+{
+ int ret;
+
+ ret = spi_nor_xread_sr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ nor->erase_opcode = SPINOR_OP_XSE;
+ nor->program_opcode = SPINOR_OP_XPP;
+ nor->read_opcode = SPINOR_OP_READ;
+ nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+
+ /*
+ * This flashes have a page size of 264 or 528 bytes (known as
+ * Default addressing mode). It can be changed to a more standard
+ * Power of two mode where the page size is 256/512. This comes
+ * with a price: there is 3% less of space, the data is corrupted
+ * and the page size cannot be changed back to default addressing
+ * mode.
+ *
+ * The current addressing mode can be read from the XRDSR register
+ * and should not be changed, because is a destructive operation.
+ */
+ if (nor->bouncebuf[0] & XSR_PAGESIZE) {
+ /* Flash in Power of 2 mode */
+ nor->page_size = (nor->page_size == 264) ? 256 : 512;
+ nor->mtd.writebufsize = nor->page_size;
+ nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors;
+ nor->mtd.erasesize = 8 * nor->page_size;
+ } else {
+ /* Flash in Default addressing mode */
+ nor->params.convert_addr = s3an_convert_addr;
+ nor->mtd.erasesize = nor->info->sector_size;
+ }
+
+ return 0;
+}
+
+static void xilinx_post_sfdp_fixups(struct spi_nor *nor)
+{
+ nor->params.setup = xilinx_nor_setup;
+}
+
+static const struct spi_nor_fixups xilinx_fixups = {
+ .post_sfdp = xilinx_post_sfdp_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_xilinx = {
+ .name = "xilinx",
+ .parts = xilinx_parts,
+ .nparts = ARRAY_SIZE(xilinx_parts),
+ .fixups = &xilinx_fixups,
+};