Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support SPI based w5100 devices, from Akinobu Mita.

   2) Partial Segmentation Offload, from Alexander Duyck.

   3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.

   4) Allow cls_flower stats offload, from Amir Vadai.

   5) Implement bpf blinding, from Daniel Borkmann.

   6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
      actually using FASYNC these atomics are superfluous.  From Eric
      Dumazet.

   7) Run TCP more preemptibly, also from Eric Dumazet.

   8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
      driver, from Gal Pressman.

   9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.

  10) Improve BPF usage documentation, from Jesper Dangaard Brouer.

  11) Support tunneling offloads in qed, from Manish Chopra.

  12) aRFS offloading in mlx5e, from Maor Gottlieb.

  13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
      Leitner.

  14) Add MSG_EOR support to TCP, this allows controlling packet
      coalescing on application record boundaries for more accurate
      socket timestamp sampling.  From Martin KaFai Lau.

  15) Fix alignment of 64-bit netlink attributes across the board, from
      Nicolas Dichtel.

  16) Per-vlan stats in bridging, from Nikolay Aleksandrov.

  17) Several conversions of drivers to ethtool ksettings, from Philippe
      Reynes.

  18) Checksum neutral ILA in ipv6, from Tom Herbert.

  19) Factorize all of the various marvell dsa drivers into one, from
      Vivien Didelot

  20) Add VF support to qed driver, from Yuval Mintz"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
  Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
  Revert "phy dp83867: Make rgmii parameters optional"
  r8169: default to 64-bit DMA on recent PCIe chips
  phy dp83867: Make rgmii parameters optional
  phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
  bpf: arm64: remove callee-save registers use for tmp registers
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  switchdev: pass pointer to fib_info instead of copy
  net_sched: close another race condition in tcf_mirred_release()
  tipc: fix nametable publication field in nl compat
  drivers: net: Don't print unpopulated net_device name
  qed: add support for dcbx.
  ravb: Add missing free_irq() calls to ravb_close()
  qed: Remove a stray tab
  net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fec-mpc52xx: use phydev from struct net_device
  bpf, doc: fix typo on bpf_asm descriptions
  stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
  net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fs-enet: use phydev from struct net_device
  ...

1 files changed, 4 insertions, 41 deletions

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 90ba003d8fdf..200663c43ce9 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -1,10 +1,6 @@
 menu "Distributed Switch Architecture drivers"
 	depends on HAVE_NET_DSA
 
-config NET_DSA_MV88E6XXX
-	tristate
-	default n
-
 config NET_DSA_MV88E6060
 	tristate "Marvell 88E6060 ethernet switch chip support"
 	depends on NET_DSA
@@ -13,46 +9,13 @@ config NET_DSA_MV88E6060
 	  This enables support for the Marvell 88E6060 ethernet switch
 	  chip.
 
-config NET_DSA_MV88E6XXX_NEED_PPU
-	bool
-	default n
-
-config NET_DSA_MV88E6131
-	tristate "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
-	depends on NET_DSA
-	select NET_DSA_MV88E6XXX
-	select NET_DSA_MV88E6XXX_NEED_PPU
-	select NET_DSA_TAG_DSA
-	---help---
-	  This enables support for the Marvell 88E6085/6095/6095F/6131
-	  ethernet switch chips.
-
-config NET_DSA_MV88E6123
-	tristate "Marvell 88E6123/6161/6165 ethernet switch chip support"
-	depends on NET_DSA
-	select NET_DSA_MV88E6XXX
-	select NET_DSA_TAG_EDSA
-	---help---
-	  This enables support for the Marvell 88E6123/6161/6165
-	  ethernet switch chips.
-
-config NET_DSA_MV88E6171
-	tristate "Marvell 88E6171/6175/6350/6351 ethernet switch chip support"
-	depends on NET_DSA
-	select NET_DSA_MV88E6XXX
-	select NET_DSA_TAG_EDSA
-	---help---
-	  This enables support for the Marvell 88E6171/6175/6350/6351
-	  ethernet switches chips.
-
-config NET_DSA_MV88E6352
-	tristate "Marvell 88E6172/6176/6320/6321/6352 ethernet switch chip support"
+config NET_DSA_MV88E6XXX
+	tristate "Marvell 88E6xxx Ethernet switch chip support"
 	depends on NET_DSA
-	select NET_DSA_MV88E6XXX
 	select NET_DSA_TAG_EDSA
 	---help---
-	  This enables support for the Marvell 88E6172, 88E6176, 88E6320,
-	  88E6321 and 88E6352 ethernet switch chips.
+	  This enables support for most of the Marvell 88E6xxx models of
+	  Ethernet switch chips, except 88E6060.
 
 config NET_DSA_BCM_SF2
 	tristate "Broadcom Starfighter 2 Ethernet switch support"