diff options
author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2023-05-26 09:34:42 +0200 |
---|---|---|
committer | Paolo Abeni <pabeni@redhat.com> | 2023-05-30 09:48:17 +0200 |
commit | b8311f46c6f5a2030f43c764e742015867293493 (patch) | |
tree | 6c8d5a1d10169c86f79593a5d21ea73d9e0436c8 /drivers/net/dsa/microchip/ksz8795.c | |
parent | 2f0d579956e87a67c43e225c85488ff7a13bc3b8 (diff) |
net: dsa: microchip: add an enum for regmap widths
It is not immediately obvious that this driver allocates, via the
KSZ_REGMAP_TABLE() macro, 3 regmaps for register access: dev->regmap[0]
for 8-bit access, dev->regmap[1] for 16-bit and dev->regmap[2] for
32-bit access.
In future changes that add support for reg_fields, each field will have
to specify through which of the 3 regmaps it's going to go. Add an enum
now, to denote one of the 3 register access widths, and make the code go
through some wrapper functions for easier review and further
modification.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Diffstat (limited to 'drivers/net/dsa/microchip/ksz8795.c')
-rw-r--r-- | drivers/net/dsa/microchip/ksz8795.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index f56fca1b1a22..d2f7fa3fbd27 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -28,13 +28,13 @@ static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { - regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0); + regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); } static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, bool set) { - regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset), + regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), bits, set ? bits : 0); } @@ -1425,14 +1425,14 @@ int ksz8_setup(struct dsa_switch *ds) ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); /* Enable aggressive back off algorithm in half duplex mode. */ - regmap_update_bits(dev->regmap[0], REG_SW_CTRL_1, + regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1, SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); /* * Make sure unicast VLAN boundary is set as default and * enable no excessive collision drop. */ - regmap_update_bits(dev->regmap[0], REG_SW_CTRL_2, + regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2, UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); |