Merge tag 'asoc-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.2

This is a pretty huge set of changes, it's been a pretty active release
all round but the big thing with this release is the Sound Open Firmware
changes from Intel, providing another DSP framework for use with the
DSPs in their SoCs.  This one works with the firmware of the same name
which is free software (unlike the previous DSP firmwares and framework)
and there has been some interest in adoption by other systems already so
hopefully we will see adoption by other vendors in the future.

Other highlights include:

 - Support for MCLK/sample rate ratio setting in the generic cards.
 - Support for pin switches in the generic cards.
 - A big set of improvements to the TLV320AIC32x4 drivers from Annaliese
   McDermond.
 - New drivers for Freescale audio mixers, several Intel machines,
   several Mediatek machines, Meson G12A, Sound Open Firmware and
   Spreadtrum compressed audio and DMA devices.

1 files changed, 155 insertions, 19 deletions

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 576b37d12a63..c4fa400efdcc 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -481,6 +481,155 @@ qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
 		qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask);
 }
 
+static u32
+qca8k_port_to_phy(int port)
+{
+	/* From Andrew Lunn:
+	 * Port 0 has no internal phy.
+	 * Port 1 has an internal PHY at MDIO address 0.
+	 * Port 2 has an internal PHY at MDIO address 1.
+	 * ...
+	 * Port 5 has an internal PHY at MDIO address 4.
+	 * Port 6 has no internal PHY.
+	 */
+
+	return port - 1;
+}
+
+static int
+qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
+{
+	u32 phy, val;
+
+	if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+		return -EINVAL;
+
+	/* callee is responsible for not passing bad ports,
+	 * but we still would like to make spills impossible.
+	 */
+	phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+	val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+	      QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+	      QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
+	      QCA8K_MDIO_MASTER_DATA(data);
+
+	qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+
+	return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
+		QCA8K_MDIO_MASTER_BUSY);
+}
+
+static int
+qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
+{
+	u32 phy, val;
+
+	if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+		return -EINVAL;
+
+	/* callee is responsible for not passing bad ports,
+	 * but we still would like to make spills impossible.
+	 */
+	phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+	val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+	      QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+	      QCA8K_MDIO_MASTER_REG_ADDR(regnum);
+
+	qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+
+	if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
+			    QCA8K_MDIO_MASTER_BUSY))
+		return -ETIMEDOUT;
+
+	val = (qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL) &
+		QCA8K_MDIO_MASTER_DATA_MASK);
+
+	return val;
+}
+
+static int
+qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
+{
+	struct qca8k_priv *priv = ds->priv;
+
+	return qca8k_mdio_write(priv, port, regnum, data);
+}
+
+static int
+qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+	struct qca8k_priv *priv = ds->priv;
+	int ret;
+
+	ret = qca8k_mdio_read(priv, port, regnum);
+
+	if (ret < 0)
+		return 0xffff;
+
+	return ret;
+}
+
+static int
+qca8k_setup_mdio_bus(struct qca8k_priv *priv)
+{
+	u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
+	struct device_node *ports, *port;
+	int err;
+
+	ports = of_get_child_by_name(priv->dev->of_node, "ports");
+	if (!ports)
+		return -EINVAL;
+
+	for_each_available_child_of_node(ports, port) {
+		err = of_property_read_u32(port, "reg", &reg);
+		if (err)
+			return err;
+
+		if (!dsa_is_user_port(priv->ds, reg))
+			continue;
+
+		if (of_property_read_bool(port, "phy-handle"))
+			external_mdio_mask |= BIT(reg);
+		else
+			internal_mdio_mask |= BIT(reg);
+	}
+
+	if (!external_mdio_mask && !internal_mdio_mask) {
+		dev_err(priv->dev, "no PHYs are defined.\n");
+		return -EINVAL;
+	}
+
+	/* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
+	 * the MDIO_MASTER register also _disconnects_ the external MDC
+	 * passthrough to the internal PHYs. It's not possible to use both
+	 * configurations at the same time!
+	 *
+	 * Because this came up during the review process:
+	 * If the external mdio-bus driver is capable magically disabling
+	 * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
+	 * accessors for the time being, it would be possible to pull this
+	 * off.
+	 */
+	if (!!external_mdio_mask && !!internal_mdio_mask) {
+		dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
+		return -EINVAL;
+	}
+
+	if (external_mdio_mask) {
+		/* Make sure to disable the internal mdio bus in cases
+		 * a dt-overlay and driver reload changed the configuration
+		 */
+
+		qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
+				QCA8K_MDIO_MASTER_EN);
+		return 0;
+	}
+
+	priv->ops.phy_read = qca8k_phy_read;
+	priv->ops.phy_write = qca8k_phy_write;
+	return 0;
+}
+
 static int
 qca8k_setup(struct dsa_switch *ds)
 {
@@ -502,6 +651,10 @@ qca8k_setup(struct dsa_switch *ds)
 	if (IS_ERR(priv->regmap))
 		pr_warn("regmap initialization failed");
 
+	ret = qca8k_setup_mdio_bus(priv);
+	if (ret)
+		return ret;
+
 	/* Initialize CPU port pad mode (xMII type, delays...) */
 	phy_mode = of_get_phy_mode(ds->ports[QCA8K_CPU_PORT].dn);
 	if (phy_mode < 0) {
@@ -624,22 +777,6 @@ qca8k_adjust_link(struct dsa_switch *ds, int port, struct phy_device *phy)
 	qca8k_port_set_status(priv, port, 1);
 }
 
-static int
-qca8k_phy_read(struct dsa_switch *ds, int phy, int regnum)
-{
-	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-
-	return mdiobus_read(priv->bus, phy, regnum);
-}
-
-static int
-qca8k_phy_write(struct dsa_switch *ds, int phy, int regnum, u16 val)
-{
-	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-
-	return mdiobus_write(priv->bus, phy, regnum, val);
-}
-
 static void
 qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data)
 {
@@ -879,8 +1016,6 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
 	.setup			= qca8k_setup,
 	.adjust_link            = qca8k_adjust_link,
 	.get_strings		= qca8k_get_strings,
-	.phy_read		= qca8k_phy_read,
-	.phy_write		= qca8k_phy_write,
 	.get_ethtool_stats	= qca8k_get_ethtool_stats,
 	.get_sset_count		= qca8k_get_sset_count,
 	.get_mac_eee		= qca8k_get_mac_eee,
@@ -923,7 +1058,8 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 		return -ENOMEM;
 
 	priv->ds->priv = priv;
-	priv->ds->ops = &qca8k_switch_ops;
+	priv->ops = qca8k_switch_ops;
+	priv->ds->ops = &priv->ops;
 	mutex_init(&priv->reg_mutex);
 	dev_set_drvdata(&mdiodev->dev, priv);