Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Lots of bug fixes here:

   1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.

   2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
      Crispin.

   3) Use after free in psock backlog workqueue, from John Fastabend.

   4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
      Salem.

   5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.

   6) Network header needs to be set for packet redirect in nfp, from
      John Hurley.

   7) Fix udp zerocopy refcnt, from Willem de Bruijn.

   8) Don't assume linear buffers in vxlan and geneve error handlers,
      from Stefano Brivio.

   9) Fix TOS matching in mlxsw, from Jiri Pirko.

  10) More SCTP cookie memory leak fixes, from Neil Horman.

  11) Fix VLAN filtering in rtl8366, from Linus Walluij.

  12) Various TCP SACK payload size and fragmentation memory limit fixes
      from Eric Dumazet.

  13) Use after free in pneigh_get_next(), also from Eric Dumazet.

  14) LAPB control block leak fix from Jeremy Sowden"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
  lapb: fixed leak of control-blocks.
  tipc: purge deferredq list for each grp member in tipc_group_delete
  ax25: fix inconsistent lock state in ax25_destroy_timer
  neigh: fix use-after-free read in pneigh_get_next
  tcp: fix compile error if !CONFIG_SYSCTL
  hv_sock: Suppress bogus "may be used uninitialized" warnings
  be2net: Fix number of Rx queues used for flow hashing
  net: handle 802.1P vlan 0 packets properly
  tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
  tcp: add tcp_min_snd_mss sysctl
  tcp: tcp_fragment() should apply sane memory limits
  tcp: limit payload size of sacked skbs
  Revert "net: phylink: set the autoneg state in phylink_phy_change"
  bpf: fix nested bpf tracepoints with per-cpu data
  bpf: Fix out of bounds memory access in bpf_sk_storage
  vsock/virtio: set SOCK_DONE on peer shutdown
  net: dsa: rtl8366: Fix up VLAN filtering
  net: phylink: set the autoneg state in phylink_phy_change
  net: add high_order_alloc_disable sysctl/static key
  tcp: add tcp_tx_skb_cache sysctl
  ...

1 files changed, 497 insertions, 0 deletions

diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c
new file mode 100644
index 000000000000..dc0509c02d29
--- /dev/null
+++ b/drivers/net/dsa/realtek-smi-core.c
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Realtek Simple Management Interface (SMI) driver
+ * It can be discussed how "simple" this interface is.
+ *
+ * The SMI protocol piggy-backs the MDIO MDC and MDIO signals levels
+ * but the protocol is not MDIO at all. Instead it is a Realtek
+ * pecularity that need to bit-bang the lines in a special way to
+ * communicate with the switch.
+ *
+ * ASICs we intend to support with this driver:
+ *
+ * RTL8366   - The original version, apparently
+ * RTL8369   - Similar enough to have the same datsheet as RTL8366
+ * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
+ *             different register layout from the other two
+ * RTL8366S  - Is this "RTL8366 super"?
+ * RTL8367   - Has an OpenWRT driver as well
+ * RTL8368S  - Seems to be an alternative name for RTL8366RB
+ * RTL8370   - Also uses SMI
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/if_bridge.h>
+
+#include "realtek-smi-core.h"
+
+#define REALTEK_SMI_ACK_RETRY_COUNT		5
+#define REALTEK_SMI_HW_STOP_DELAY		25	/* msecs */
+#define REALTEK_SMI_HW_START_DELAY		100	/* msecs */
+
+static inline void realtek_smi_clk_delay(struct realtek_smi *smi)
+{
+	ndelay(smi->clk_delay);
+}
+
+static void realtek_smi_start(struct realtek_smi *smi)
+{
+	/* Set GPIO pins to output mode, with initial state:
+	 * SCK = 0, SDA = 1
+	 */
+	gpiod_direction_output(smi->mdc, 0);
+	gpiod_direction_output(smi->mdio, 1);
+	realtek_smi_clk_delay(smi);
+
+	/* CLK 1: 0 -> 1, 1 -> 0 */
+	gpiod_set_value(smi->mdc, 1);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 0);
+	realtek_smi_clk_delay(smi);
+
+	/* CLK 2: */
+	gpiod_set_value(smi->mdc, 1);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdio, 0);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 0);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdio, 1);
+}
+
+static void realtek_smi_stop(struct realtek_smi *smi)
+{
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdio, 0);
+	gpiod_set_value(smi->mdc, 1);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdio, 1);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 1);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 0);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 1);
+
+	/* Add a click */
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 0);
+	realtek_smi_clk_delay(smi);
+	gpiod_set_value(smi->mdc, 1);
+
+	/* Set GPIO pins to input mode */
+	gpiod_direction_input(smi->mdio);
+	gpiod_direction_input(smi->mdc);
+}
+
+static void realtek_smi_write_bits(struct realtek_smi *smi, u32 data, u32 len)
+{
+	for (; len > 0; len--) {
+		realtek_smi_clk_delay(smi);
+
+		/* Prepare data */
+		gpiod_set_value(smi->mdio, !!(data & (1 << (len - 1))));
+		realtek_smi_clk_delay(smi);
+
+		/* Clocking */
+		gpiod_set_value(smi->mdc, 1);
+		realtek_smi_clk_delay(smi);
+		gpiod_set_value(smi->mdc, 0);
+	}
+}
+
+static void realtek_smi_read_bits(struct realtek_smi *smi, u32 len, u32 *data)
+{
+	gpiod_direction_input(smi->mdio);
+
+	for (*data = 0; len > 0; len--) {
+		u32 u;
+
+		realtek_smi_clk_delay(smi);
+
+		/* Clocking */
+		gpiod_set_value(smi->mdc, 1);
+		realtek_smi_clk_delay(smi);
+		u = !!gpiod_get_value(smi->mdio);
+		gpiod_set_value(smi->mdc, 0);
+
+		*data |= (u << (len - 1));
+	}
+
+	gpiod_direction_output(smi->mdio, 0);
+}
+
+static int realtek_smi_wait_for_ack(struct realtek_smi *smi)
+{
+	int retry_cnt;
+
+	retry_cnt = 0;
+	do {
+		u32 ack;
+
+		realtek_smi_read_bits(smi, 1, &ack);
+		if (ack == 0)
+			break;
+
+		if (++retry_cnt > REALTEK_SMI_ACK_RETRY_COUNT) {
+			dev_err(smi->dev, "ACK timeout\n");
+			return -ETIMEDOUT;
+		}
+	} while (1);
+
+	return 0;
+}
+
+static int realtek_smi_write_byte(struct realtek_smi *smi, u8 data)
+{
+	realtek_smi_write_bits(smi, data, 8);
+	return realtek_smi_wait_for_ack(smi);
+}
+
+static int realtek_smi_write_byte_noack(struct realtek_smi *smi, u8 data)
+{
+	realtek_smi_write_bits(smi, data, 8);
+	return 0;
+}
+
+static int realtek_smi_read_byte0(struct realtek_smi *smi, u8 *data)
+{
+	u32 t;
+
+	/* Read data */
+	realtek_smi_read_bits(smi, 8, &t);
+	*data = (t & 0xff);
+
+	/* Send an ACK */
+	realtek_smi_write_bits(smi, 0x00, 1);
+
+	return 0;
+}
+
+static int realtek_smi_read_byte1(struct realtek_smi *smi, u8 *data)
+{
+	u32 t;
+
+	/* Read data */
+	realtek_smi_read_bits(smi, 8, &t);
+	*data = (t & 0xff);
+
+	/* Send an ACK */
+	realtek_smi_write_bits(smi, 0x01, 1);
+
+	return 0;
+}
+
+static int realtek_smi_read_reg(struct realtek_smi *smi, u32 addr, u32 *data)
+{
+	unsigned long flags;
+	u8 lo = 0;
+	u8 hi = 0;
+	int ret;
+
+	spin_lock_irqsave(&smi->lock, flags);
+
+	realtek_smi_start(smi);
+
+	/* Send READ command */
+	ret = realtek_smi_write_byte(smi, smi->cmd_read);
+	if (ret)
+		goto out;
+
+	/* Set ADDR[7:0] */
+	ret = realtek_smi_write_byte(smi, addr & 0xff);
+	if (ret)
+		goto out;
+
+	/* Set ADDR[15:8] */
+	ret = realtek_smi_write_byte(smi, addr >> 8);
+	if (ret)
+		goto out;
+
+	/* Read DATA[7:0] */
+	realtek_smi_read_byte0(smi, &lo);
+	/* Read DATA[15:8] */
+	realtek_smi_read_byte1(smi, &hi);
+
+	*data = ((u32)lo) | (((u32)hi) << 8);
+
+	ret = 0;
+
+ out:
+	realtek_smi_stop(smi);
+	spin_unlock_irqrestore(&smi->lock, flags);
+
+	return ret;
+}
+
+static int realtek_smi_write_reg(struct realtek_smi *smi,
+				 u32 addr, u32 data, bool ack)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&smi->lock, flags);
+
+	realtek_smi_start(smi);
+
+	/* Send WRITE command */
+	ret = realtek_smi_write_byte(smi, smi->cmd_write);
+	if (ret)
+		goto out;
+
+	/* Set ADDR[7:0] */
+	ret = realtek_smi_write_byte(smi, addr & 0xff);
+	if (ret)
+		goto out;
+
+	/* Set ADDR[15:8] */
+	ret = realtek_smi_write_byte(smi, addr >> 8);
+	if (ret)
+		goto out;
+
+	/* Write DATA[7:0] */
+	ret = realtek_smi_write_byte(smi, data & 0xff);
+	if (ret)
+		goto out;
+
+	/* Write DATA[15:8] */
+	if (ack)
+		ret = realtek_smi_write_byte(smi, data >> 8);
+	else
+		ret = realtek_smi_write_byte_noack(smi, data >> 8);
+	if (ret)
+		goto out;
+
+	ret = 0;
+
+ out:
+	realtek_smi_stop(smi);
+	spin_unlock_irqrestore(&smi->lock, flags);
+
+	return ret;
+}
+
+/* There is one single case when we need to use this accessor and that
+ * is when issueing soft reset. Since the device reset as soon as we write
+ * that bit, no ACK will come back for natural reasons.
+ */
+int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr,
+				u32 data)
+{
+	return realtek_smi_write_reg(smi, addr, data, false);
+}
+EXPORT_SYMBOL_GPL(realtek_smi_write_reg_noack);
+
+/* Regmap accessors */
+
+static int realtek_smi_write(void *ctx, u32 reg, u32 val)
+{
+	struct realtek_smi *smi = ctx;
+
+	return realtek_smi_write_reg(smi, reg, val, true);
+}
+
+static int realtek_smi_read(void *ctx, u32 reg, u32 *val)
+{
+	struct realtek_smi *smi = ctx;
+
+	return realtek_smi_read_reg(smi, reg, val);
+}
+
+static const struct regmap_config realtek_smi_mdio_regmap_config = {
+	.reg_bits = 10, /* A4..A0 R4..R0 */
+	.val_bits = 16,
+	.reg_stride = 1,
+	/* PHY regs are at 0x8000 */
+	.max_register = 0xffff,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.reg_read = realtek_smi_read,
+	.reg_write = realtek_smi_write,
+	.cache_type = REGCACHE_NONE,
+};
+
+static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+	struct realtek_smi *smi = bus->priv;
+
+	return smi->ops->phy_read(smi, addr, regnum);
+}
+
+static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum,
+				  u16 val)
+{
+	struct realtek_smi *smi = bus->priv;
+
+	return smi->ops->phy_write(smi, addr, regnum, val);
+}
+
+int realtek_smi_setup_mdio(struct realtek_smi *smi)
+{
+	struct device_node *mdio_np;
+	int ret;
+
+	mdio_np = of_get_compatible_child(smi->dev->of_node, "realtek,smi-mdio");
+	if (!mdio_np) {
+		dev_err(smi->dev, "no MDIO bus node\n");
+		return -ENODEV;
+	}
+
+	smi->slave_mii_bus = devm_mdiobus_alloc(smi->dev);
+	if (!smi->slave_mii_bus) {
+		ret = -ENOMEM;
+		goto err_put_node;
+	}
+	smi->slave_mii_bus->priv = smi;
+	smi->slave_mii_bus->name = "SMI slave MII";
+	smi->slave_mii_bus->read = realtek_smi_mdio_read;
+	smi->slave_mii_bus->write = realtek_smi_mdio_write;
+	snprintf(smi->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d",
+		 smi->ds->index);
+	smi->slave_mii_bus->dev.of_node = mdio_np;
+	smi->slave_mii_bus->parent = smi->dev;
+	smi->ds->slave_mii_bus = smi->slave_mii_bus;
+
+	ret = of_mdiobus_register(smi->slave_mii_bus, mdio_np);
+	if (ret) {
+		dev_err(smi->dev, "unable to register MDIO bus %s\n",
+			smi->slave_mii_bus->id);
+		goto err_put_node;
+	}
+
+	return 0;
+
+err_put_node:
+	of_node_put(mdio_np);
+
+	return ret;
+}
+
+static int realtek_smi_probe(struct platform_device *pdev)
+{
+	const struct realtek_smi_variant *var;
+	struct device *dev = &pdev->dev;
+	struct realtek_smi *smi;
+	struct device_node *np;
+	int ret;
+
+	var = of_device_get_match_data(dev);
+	np = dev->of_node;
+
+	smi = devm_kzalloc(dev, sizeof(*smi), GFP_KERNEL);
+	if (!smi)
+		return -ENOMEM;
+	smi->map = devm_regmap_init(dev, NULL, smi,
+				    &realtek_smi_mdio_regmap_config);
+	if (IS_ERR(smi->map)) {
+		ret = PTR_ERR(smi->map);
+		dev_err(dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	/* Link forward and backward */
+	smi->dev = dev;
+	smi->clk_delay = var->clk_delay;
+	smi->cmd_read = var->cmd_read;
+	smi->cmd_write = var->cmd_write;
+	smi->ops = var->ops;
+
+	dev_set_drvdata(dev, smi);
+	spin_lock_init(&smi->lock);
+
+	/* TODO: if power is software controlled, set up any regulators here */
+
+	/* Assert then deassert RESET */
+	smi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(smi->reset)) {
+		dev_err(dev, "failed to get RESET GPIO\n");
+		return PTR_ERR(smi->reset);
+	}
+	msleep(REALTEK_SMI_HW_STOP_DELAY);
+	gpiod_set_value(smi->reset, 0);
+	msleep(REALTEK_SMI_HW_START_DELAY);
+	dev_info(dev, "deasserted RESET\n");
+
+	/* Fetch MDIO pins */
+	smi->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW);
+	if (IS_ERR(smi->mdc))
+		return PTR_ERR(smi->mdc);
+	smi->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW);
+	if (IS_ERR(smi->mdio))
+		return PTR_ERR(smi->mdio);
+
+	smi->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+
+	ret = smi->ops->detect(smi);
+	if (ret) {
+		dev_err(dev, "unable to detect switch\n");
+		return ret;
+	}
+
+	smi->ds = dsa_switch_alloc(dev, smi->num_ports);
+	if (!smi->ds)
+		return -ENOMEM;
+	smi->ds->priv = smi;
+
+	smi->ds->ops = var->ds_ops;
+	ret = dsa_register_switch(smi->ds);
+	if (ret) {
+		dev_err(dev, "unable to register switch ret = %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int realtek_smi_remove(struct platform_device *pdev)
+{
+	struct realtek_smi *smi = dev_get_drvdata(&pdev->dev);
+
+	dsa_unregister_switch(smi->ds);
+	if (smi->slave_mii_bus)
+		of_node_put(smi->slave_mii_bus->dev.of_node);
+	gpiod_set_value(smi->reset, 1);
+
+	return 0;
+}
+
+static const struct of_device_id realtek_smi_of_match[] = {
+	{
+		.compatible = "realtek,rtl8366rb",
+		.data = &rtl8366rb_variant,
+	},
+	{
+		/* FIXME: add support for RTL8366S and more */
+		.compatible = "realtek,rtl8366s",
+		.data = NULL,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, realtek_smi_of_match);
+
+static struct platform_driver realtek_smi_driver = {
+	.driver = {
+		.name = "realtek-smi",
+		.of_match_table = of_match_ptr(realtek_smi_of_match),
+	},
+	.probe  = realtek_smi_probe,
+	.remove = realtek_smi_remove,
+};
+module_platform_driver(realtek_smi_driver);
+
+MODULE_LICENSE("GPL");