Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...

38 files changed, 2545 insertions, 1111 deletions

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index b2eeff04f4c8..8f50abe739b7 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1266,95 +1266,70 @@ static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
 		phy_modes(interface));
 }
 
-static void b53_adjust_link(struct dsa_switch *ds, int port,
-			    struct phy_device *phydev)
+static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port,
+				   phy_interface_t interface)
 {
 	struct b53_device *dev = ds->priv;
-	struct ethtool_keee *p = &dev->ports[port].eee;
-	u8 rgmii_ctrl = 0, reg = 0, off;
-	bool tx_pause = false;
-	bool rx_pause = false;
-
-	if (!phy_is_pseudo_fixed_link(phydev))
-		return;
+	u8 rgmii_ctrl = 0, off;
 
-	/* Enable flow control on BCM5301x's CPU port */
-	if (is5301x(dev) && dsa_is_cpu_port(ds, port))
-		tx_pause = rx_pause = true;
+	if (port == dev->imp_port)
+		off = B53_RGMII_CTRL_IMP;
+	else
+		off = B53_RGMII_CTRL_P(port);
 
-	if (phydev->pause) {
-		if (phydev->asym_pause)
-			tx_pause = true;
-		rx_pause = true;
-	}
+	/* Configure the port RGMII clock delay by DLL disabled and
+	 * tx_clk aligned timing (restoring to reset defaults)
+	 */
+	b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
+	rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
+			RGMII_CTRL_TIMING_SEL);
 
-	b53_force_port_config(dev, port, phydev->speed, phydev->duplex,
-			      tx_pause, rx_pause);
-	b53_force_link(dev, port, phydev->link);
+	/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
+	 * sure that we enable the port TX clock internal delay to
+	 * account for this internal delay that is inserted, otherwise
+	 * the switch won't be able to receive correctly.
+	 *
+	 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
+	 * any delay neither on transmission nor reception, so the
+	 * BCM53125 must also be configured accordingly to account for
+	 * the lack of delay and introduce
+	 *
+	 * The BCM53125 switch has its RX clock and TX clock control
+	 * swapped, hence the reason why we modify the TX clock path in
+	 * the "RGMII" case
+	 */
+	if (interface == PHY_INTERFACE_MODE_RGMII_TXID)
+		rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
+	if (interface == PHY_INTERFACE_MODE_RGMII)
+		rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
+	rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
+	b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
 
-	if (is63xx(dev) && port >= B53_63XX_RGMII0)
-		b53_adjust_63xx_rgmii(ds, port, phydev->interface);
+	dev_info(ds->dev, "Configured port %d for %s\n", port,
+		 phy_modes(interface));
+}
 
-	if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
-		if (port == dev->imp_port)
-			off = B53_RGMII_CTRL_IMP;
-		else
-			off = B53_RGMII_CTRL_P(port);
+static void b53_adjust_5325_mii(struct dsa_switch *ds, int port)
+{
+	struct b53_device *dev = ds->priv;
+	u8 reg = 0;
 
-		/* Configure the port RGMII clock delay by DLL disabled and
-		 * tx_clk aligned timing (restoring to reset defaults)
-		 */
-		b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
-		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
-				RGMII_CTRL_TIMING_SEL);
-
-		/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
-		 * sure that we enable the port TX clock internal delay to
-		 * account for this internal delay that is inserted, otherwise
-		 * the switch won't be able to receive correctly.
-		 *
-		 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
-		 * any delay neither on transmission nor reception, so the
-		 * BCM53125 must also be configured accordingly to account for
-		 * the lack of delay and introduce
-		 *
-		 * The BCM53125 switch has its RX clock and TX clock control
-		 * swapped, hence the reason why we modify the TX clock path in
-		 * the "RGMII" case
-		 */
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
-			rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
-			rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
-		rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
-		b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
-
-		dev_info(ds->dev, "Configured port %d for %s\n", port,
-			 phy_modes(phydev->interface));
-	}
+	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+		  &reg);
 
-	/* configure MII port if necessary */
-	if (is5325(dev)) {
+	/* reverse mii needs to be enabled */
+	if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
+		b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+			   reg | PORT_OVERRIDE_RV_MII_25);
 		b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
 			  &reg);
 
-		/* reverse mii needs to be enabled */
 		if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
-			b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
-				   reg | PORT_OVERRIDE_RV_MII_25);
-			b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
-				  &reg);
-
-			if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
-				dev_err(ds->dev,
-					"Failed to enable reverse MII mode\n");
-				return;
-			}
+			dev_err(ds->dev,
+				"Failed to enable reverse MII mode\n");
+			return;
 		}
 	}
-
-	/* Re-negotiate EEE if it was enabled already */
-	p->eee_enabled = b53_eee_init(ds, port, phydev);
 }
 
 void b53_port_event(struct dsa_switch *ds, int port)
@@ -1408,30 +1383,48 @@ static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
 		dev->ops->phylink_get_caps(dev, port, config);
 }
 
-static struct phylink_pcs *b53_phylink_mac_select_pcs(struct dsa_switch *ds,
-						      int port,
+static struct phylink_pcs *b53_phylink_mac_select_pcs(struct phylink_config *config,
 						      phy_interface_t interface)
 {
-	struct b53_device *dev = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct b53_device *dev = dp->ds->priv;
 
 	if (!dev->ops->phylink_mac_select_pcs)
 		return NULL;
 
-	return dev->ops->phylink_mac_select_pcs(dev, port, interface);
+	return dev->ops->phylink_mac_select_pcs(dev, dp->index, interface);
 }
 
-void b53_phylink_mac_config(struct dsa_switch *ds, int port,
-			    unsigned int mode,
-			    const struct phylink_link_state *state)
+static void b53_phylink_mac_config(struct phylink_config *config,
+				   unsigned int mode,
+				   const struct phylink_link_state *state)
 {
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	phy_interface_t interface = state->interface;
+	struct dsa_switch *ds = dp->ds;
+	struct b53_device *dev = ds->priv;
+	int port = dp->index;
+
+	if (is63xx(dev) && port >= B53_63XX_RGMII0)
+		b53_adjust_63xx_rgmii(ds, port, interface);
+
+	if (mode == MLO_AN_FIXED) {
+		if (is531x5(dev) && phy_interface_mode_is_rgmii(interface))
+			b53_adjust_531x5_rgmii(ds, port, interface);
+
+		/* configure MII port if necessary */
+		if (is5325(dev))
+			b53_adjust_5325_mii(ds, port);
+	}
 }
-EXPORT_SYMBOL(b53_phylink_mac_config);
 
-void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
-			       unsigned int mode,
-			       phy_interface_t interface)
+static void b53_phylink_mac_link_down(struct phylink_config *config,
+				      unsigned int mode,
+				      phy_interface_t interface)
 {
-	struct b53_device *dev = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct b53_device *dev = dp->ds->priv;
+	int port = dp->index;
 
 	if (mode == MLO_AN_PHY)
 		return;
@@ -1445,24 +1438,31 @@ void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
 	    dev->ops->serdes_link_set)
 		dev->ops->serdes_link_set(dev, port, mode, interface, false);
 }
-EXPORT_SYMBOL(b53_phylink_mac_link_down);
 
-void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
-			     unsigned int mode,
-			     phy_interface_t interface,
-			     struct phy_device *phydev,
-			     int speed, int duplex,
-			     bool tx_pause, bool rx_pause)
+static void b53_phylink_mac_link_up(struct phylink_config *config,
+				    struct phy_device *phydev,
+				    unsigned int mode,
+				    phy_interface_t interface,
+				    int speed, int duplex,
+				    bool tx_pause, bool rx_pause)
 {
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct dsa_switch *ds = dp->ds;
 	struct b53_device *dev = ds->priv;
+	struct ethtool_keee *p = &dev->ports[dp->index].eee;
+	int port = dp->index;
 
-	if (is63xx(dev) && port >= B53_63XX_RGMII0)
-		b53_adjust_63xx_rgmii(ds, port, interface);
-
-	if (mode == MLO_AN_PHY)
+	if (mode == MLO_AN_PHY) {
+		/* Re-negotiate EEE if it was enabled already */
+		p->eee_enabled = b53_eee_init(ds, port, phydev);
 		return;
+	}
 
 	if (mode == MLO_AN_FIXED) {
+		/* Force flow control on BCM5301x's CPU port */
+		if (is5301x(dev) && dsa_is_cpu_port(ds, port))
+			tx_pause = rx_pause = true;
+
 		b53_force_port_config(dev, port, speed, duplex,
 				      tx_pause, rx_pause);
 		b53_force_link(dev, port, true);
@@ -1473,7 +1473,6 @@ void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	    dev->ops->serdes_link_set)
 		dev->ops->serdes_link_set(dev, port, mode, interface, true);
 }
-EXPORT_SYMBOL(b53_phylink_mac_link_up);
 
 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
 		       struct netlink_ext_ack *extack)
@@ -2268,6 +2267,13 @@ static int b53_get_max_mtu(struct dsa_switch *ds, int port)
 	return JMS_MAX_SIZE;
 }
 
+static const struct phylink_mac_ops b53_phylink_mac_ops = {
+	.mac_select_pcs	= b53_phylink_mac_select_pcs,
+	.mac_config	= b53_phylink_mac_config,
+	.mac_link_down	= b53_phylink_mac_link_down,
+	.mac_link_up	= b53_phylink_mac_link_up,
+};
+
 static const struct dsa_switch_ops b53_switch_ops = {
 	.get_tag_protocol	= b53_get_tag_protocol,
 	.setup			= b53_setup,
@@ -2278,12 +2284,7 @@ static const struct dsa_switch_ops b53_switch_ops = {
 	.get_ethtool_phy_stats	= b53_get_ethtool_phy_stats,
 	.phy_read		= b53_phy_read16,
 	.phy_write		= b53_phy_write16,
-	.adjust_link		= b53_adjust_link,
 	.phylink_get_caps	= b53_phylink_get_caps,
-	.phylink_mac_select_pcs	= b53_phylink_mac_select_pcs,
-	.phylink_mac_config	= b53_phylink_mac_config,
-	.phylink_mac_link_down	= b53_phylink_mac_link_down,
-	.phylink_mac_link_up	= b53_phylink_mac_link_up,
 	.port_enable		= b53_enable_port,
 	.port_disable		= b53_disable_port,
 	.get_mac_eee		= b53_get_mac_eee,
@@ -2726,6 +2727,7 @@ struct b53_device *b53_switch_alloc(struct device *base,
 	dev->priv = priv;
 	dev->ops = ops;
 	ds->ops = &b53_switch_ops;
+	ds->phylink_mac_ops = &b53_phylink_mac_ops;
 	dev->vlan_enabled = true;
 	/* Let DSA handle the case were multiple bridges span the same switch
 	 * device and different VLAN awareness settings are requested, which
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index c13a907947f1..05141176daf5 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -352,18 +352,6 @@ int b53_br_flags(struct dsa_switch *ds, int port,
 		 struct netlink_ext_ack *extack);
 int b53_setup_devlink_resources(struct dsa_switch *ds);
 void b53_port_event(struct dsa_switch *ds, int port);
-void b53_phylink_mac_config(struct dsa_switch *ds, int port,
-			    unsigned int mode,
-			    const struct phylink_link_state *state);
-void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
-			       unsigned int mode,
-			       phy_interface_t interface);
-void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
-			     unsigned int mode,
-			     phy_interface_t interface,
-			     struct phy_device *phydev,
-			     int speed, int duplex,
-			     bool tx_pause, bool rx_pause);
 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
 		       struct netlink_ext_ack *extack);
 int b53_vlan_add(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index bc77ee9e6d0a..ed1e6560df25 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -740,16 +740,19 @@ static void bcm_sf2_sw_get_caps(struct dsa_switch *ds, int port,
 		MAC_10 | MAC_100 | MAC_1000;
 }
 
-static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
+static void bcm_sf2_sw_mac_config(struct phylink_config *config,
 				  unsigned int mode,
 				  const struct phylink_link_state *state)
 {
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+	struct dsa_port *dp = dsa_phylink_to_port(config);
 	u32 id_mode_dis = 0, port_mode;
+	struct bcm_sf2_priv *priv;
 	u32 reg_rgmii_ctrl;
 	u32 reg;
 
-	if (port == core_readl(priv, CORE_IMP0_PRT_ID))
+	priv = bcm_sf2_to_priv(dp->ds);
+
+	if (dp->index == core_readl(priv, CORE_IMP0_PRT_ID))
 		return;
 
 	switch (state->interface) {
@@ -770,7 +773,7 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
 		return;
 	}
 
-	reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+	reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, dp->index);
 
 	/* Clear id_mode_dis bit, and the existing port mode, let
 	 * RGMII_MODE_EN bet set by mac_link_{up,down}
@@ -809,13 +812,16 @@ static void bcm_sf2_sw_mac_link_set(struct dsa_switch *ds, int port,
 	reg_writel(priv, reg, reg_rgmii_ctrl);
 }
 
-static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
+static void bcm_sf2_sw_mac_link_down(struct phylink_config *config,
 				     unsigned int mode,
 				     phy_interface_t interface)
 {
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct bcm_sf2_priv *priv;
+	int port = dp->index;
 	u32 reg, offset;
 
+	priv = bcm_sf2_to_priv(dp->ds);
 	if (priv->wol_ports_mask & BIT(port))
 		return;
 
@@ -824,23 +830,26 @@ static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
 	reg &= ~LINK_STS;
 	core_writel(priv, reg, offset);
 
-	bcm_sf2_sw_mac_link_set(ds, port, interface, false);
+	bcm_sf2_sw_mac_link_set(dp->ds, port, interface, false);
 }
 
-static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
+static void bcm_sf2_sw_mac_link_up(struct phylink_config *config,
+				   struct phy_device *phydev,
 				   unsigned int mode,
 				   phy_interface_t interface,
-				   struct phy_device *phydev,
 				   int speed, int duplex,
 				   bool tx_pause, bool rx_pause)
 {
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_keee *p = &priv->dev->ports[port].eee;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct bcm_sf2_priv *priv;
 	u32 reg_rgmii_ctrl = 0;
+	struct ethtool_keee *p;
+	int port = dp->index;
 	u32 reg, offset;
 
-	bcm_sf2_sw_mac_link_set(ds, port, interface, true);
+	bcm_sf2_sw_mac_link_set(dp->ds, port, interface, true);
 
+	priv = bcm_sf2_to_priv(dp->ds);
 	offset = bcm_sf2_port_override_offset(priv, port);
 
 	if (phy_interface_mode_is_rgmii(interface) ||
@@ -886,8 +895,10 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
 
 	core_writel(priv, reg, offset);
 
-	if (mode == MLO_AN_PHY && phydev)
-		p->eee_enabled = b53_eee_init(ds, port, phydev);
+	if (mode == MLO_AN_PHY && phydev) {
+		p = &priv->dev->ports[port].eee;
+		p->eee_enabled = b53_eee_init(dp->ds, port, phydev);
+	}
 }
 
 static void bcm_sf2_sw_fixed_state(struct dsa_switch *ds, int port,
@@ -1196,6 +1207,12 @@ static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds, int port,
 	return cnt;
 }
 
+static const struct phylink_mac_ops bcm_sf2_phylink_mac_ops = {
+	.mac_config	= bcm_sf2_sw_mac_config,
+	.mac_link_down	= bcm_sf2_sw_mac_link_down,
+	.mac_link_up	= bcm_sf2_sw_mac_link_up,
+};
+
 static const struct dsa_switch_ops bcm_sf2_ops = {
 	.get_tag_protocol	= b53_get_tag_protocol,
 	.setup			= bcm_sf2_sw_setup,
@@ -1206,9 +1223,6 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
 	.get_ethtool_phy_stats	= b53_get_ethtool_phy_stats,
 	.get_phy_flags		= bcm_sf2_sw_get_phy_flags,
 	.phylink_get_caps	= bcm_sf2_sw_get_caps,
-	.phylink_mac_config	= bcm_sf2_sw_mac_config,
-	.phylink_mac_link_down	= bcm_sf2_sw_mac_link_down,
-	.phylink_mac_link_up	= bcm_sf2_sw_mac_link_up,
 	.phylink_fixed_state	= bcm_sf2_sw_fixed_state,
 	.suspend		= bcm_sf2_sw_suspend,
 	.resume			= bcm_sf2_sw_resume,
@@ -1399,6 +1413,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
 	priv->dev = dev;
 	ds = dev->ds;
 	ds->ops = &bcm_sf2_ops;
+	ds->phylink_mac_ops = &bcm_sf2_phylink_mac_ops;
 
 	/* Advertise the 8 egress queues */
 	ds->num_tx_queues = SF2_NUM_EGRESS_QUEUES;
diff --git a/drivers/net/dsa/hirschmann/hellcreek_ptp.c b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
index 5249a1c2a80b..bfe21f9f7dcd 100644
--- a/drivers/net/dsa/hirschmann/hellcreek_ptp.c
+++ b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
@@ -27,7 +27,8 @@ void hellcreek_ptp_write(struct hellcreek *hellcreek, u16 data,
 }
 
 /* Get nanoseconds from PTP clock */
-static u64 hellcreek_ptp_clock_read(struct hellcreek *hellcreek)
+static u64 hellcreek_ptp_clock_read(struct hellcreek *hellcreek,
+				    struct ptp_system_timestamp *sts)
 {
 	u16 nsl, nsh;
 
@@ -45,16 +46,19 @@ static u64 hellcreek_ptp_clock_read(struct hellcreek *hellcreek)
 	nsh = hellcreek_ptp_read(hellcreek, PR_SS_SYNC_DATA_C);
 	nsh = hellcreek_ptp_read(hellcreek, PR_SS_SYNC_DATA_C);
 	nsh = hellcreek_ptp_read(hellcreek, PR_SS_SYNC_DATA_C);
+	ptp_read_system_prets(sts);
 	nsl = hellcreek_ptp_read(hellcreek, PR_SS_SYNC_DATA_C);
+	ptp_read_system_postts(sts);
 
 	return (u64)nsl | ((u64)nsh << 16);
 }
 
-static u64 __hellcreek_ptp_gettime(struct hellcreek *hellcreek)
+static u64 __hellcreek_ptp_gettime(struct hellcreek *hellcreek,
+				   struct ptp_system_timestamp *sts)
 {
 	u64 ns;
 
-	ns = hellcreek_ptp_clock_read(hellcreek);
+	ns = hellcreek_ptp_clock_read(hellcreek, sts);
 	if (ns < hellcreek->last_ts)
 		hellcreek->seconds++;
 	hellcreek->last_ts = ns;
@@ -72,7 +76,7 @@ u64 hellcreek_ptp_gettime_seconds(struct hellcreek *hellcreek, u64 ns)
 {
 	u64 s;
 
-	__hellcreek_ptp_gettime(hellcreek);
+	__hellcreek_ptp_gettime(hellcreek, NULL);
 	if (hellcreek->last_ts > ns)
 		s = hellcreek->seconds * NSEC_PER_SEC;
 	else
@@ -81,14 +85,15 @@ u64 hellcreek_ptp_gettime_seconds(struct hellcreek *hellcreek, u64 ns)
 	return s;
 }
 
-static int hellcreek_ptp_gettime(struct ptp_clock_info *ptp,
-				 struct timespec64 *ts)
+static int hellcreek_ptp_gettimex(struct ptp_clock_info *ptp,
+				  struct timespec64 *ts,
+				  struct ptp_system_timestamp *sts)
 {
 	struct hellcreek *hellcreek = ptp_to_hellcreek(ptp);
 	u64 ns;
 
 	mutex_lock(&hellcreek->ptp_lock);
-	ns = __hellcreek_ptp_gettime(hellcreek);
+	ns = __hellcreek_ptp_gettime(hellcreek, sts);
 	mutex_unlock(&hellcreek->ptp_lock);
 
 	*ts = ns_to_timespec64(ns);
@@ -184,7 +189,7 @@ static int hellcreek_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
 	if (abs(delta) > MAX_SLOW_OFFSET_ADJ) {
 		struct timespec64 now, then = ns_to_timespec64(delta);
 
-		hellcreek_ptp_gettime(ptp, &now);
+		hellcreek_ptp_gettimex(ptp, &now, NULL);
 		now = timespec64_add(now, then);
 		hellcreek_ptp_settime(ptp, &now);
 
@@ -233,7 +238,7 @@ static void hellcreek_ptp_overflow_check(struct work_struct *work)
 	hellcreek = dw_overflow_to_hellcreek(dw);
 
 	mutex_lock(&hellcreek->ptp_lock);
-	__hellcreek_ptp_gettime(hellcreek);
+	__hellcreek_ptp_gettime(hellcreek, NULL);
 	mutex_unlock(&hellcreek->ptp_lock);
 
 	schedule_delayed_work(&hellcreek->overflow_work,
@@ -409,7 +414,7 @@ int hellcreek_ptp_setup(struct hellcreek *hellcreek)
 	hellcreek->ptp_clock_info.pps	      = 0;
 	hellcreek->ptp_clock_info.adjfine     = hellcreek_ptp_adjfine;
 	hellcreek->ptp_clock_info.adjtime     = hellcreek_ptp_adjtime;
-	hellcreek->ptp_clock_info.gettime64   = hellcreek_ptp_gettime;
+	hellcreek->ptp_clock_info.gettimex64  = hellcreek_ptp_gettimex;
 	hellcreek->ptp_clock_info.settime64   = hellcreek_ptp_settime;
 	hellcreek->ptp_clock_info.enable      = hellcreek_ptp_enable;
 	hellcreek->ptp_clock_info.do_aux_work = hellcreek_hwtstamp_work;
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index fcb20eac332a..02f07b870f10 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -1007,15 +1007,14 @@ static const struct lan9303_mib_desc lan9303_mib[] = {
 static void lan9303_get_strings(struct dsa_switch *ds, int port,
 				u32 stringset, uint8_t *data)
 {
+	u8 *buf = data;
 	unsigned int u;
 
 	if (stringset != ETH_SS_STATS)
 		return;
 
-	for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++) {
-		strncpy(data + u * ETH_GSTRING_LEN, lan9303_mib[u].name,
-			ETH_GSTRING_LEN);
-	}
+	for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++)
+		ethtool_puts(&buf, lan9303_mib[u].name);
 }
 
 static void lan9303_get_ethtool_stats(struct dsa_switch *ds, int port,
@@ -1293,14 +1292,29 @@ static void lan9303_phylink_get_caps(struct dsa_switch *ds, int port,
 	}
 }
 
-static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void lan9303_phylink_mac_config(struct phylink_config *config,
+				       unsigned int mode,
+				       const struct phylink_link_state *state)
+{
+}
+
+static void lan9303_phylink_mac_link_down(struct phylink_config *config,
+					  unsigned int mode,
+					  phy_interface_t interface)
+{
+}
+
+static void lan9303_phylink_mac_link_up(struct phylink_config *config,
+					struct phy_device *phydev,
 					unsigned int mode,
 					phy_interface_t interface,
-					struct phy_device *phydev, int speed,
-					int duplex, bool tx_pause,
+					int speed, int duplex, bool tx_pause,
 					bool rx_pause)
 {
-	struct lan9303 *chip = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct lan9303 *chip = dp->ds->priv;
+	struct dsa_switch *ds = dp->ds;
+	int port = dp->index;
 	u32 ctl;
 	u32 reg;
 
@@ -1330,6 +1344,12 @@ static void lan9303_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	regmap_write(chip->regmap, flow_ctl_reg[port], reg);
 }
 
+static const struct phylink_mac_ops lan9303_phylink_mac_ops = {
+	.mac_config	= lan9303_phylink_mac_config,
+	.mac_link_down	= lan9303_phylink_mac_link_down,
+	.mac_link_up	= lan9303_phylink_mac_link_up,
+};
+
 static const struct dsa_switch_ops lan9303_switch_ops = {
 	.get_tag_protocol	= lan9303_get_tag_protocol,
 	.setup			= lan9303_setup,
@@ -1337,7 +1357,6 @@ static const struct dsa_switch_ops lan9303_switch_ops = {
 	.phy_read		= lan9303_phy_read,
 	.phy_write		= lan9303_phy_write,
 	.phylink_get_caps	= lan9303_phylink_get_caps,
-	.phylink_mac_link_up	= lan9303_phylink_mac_link_up,
 	.get_ethtool_stats	= lan9303_get_ethtool_stats,
 	.get_sset_count		= lan9303_get_sset_count,
 	.port_enable		= lan9303_port_enable,
@@ -1365,6 +1384,7 @@ static int lan9303_register_switch(struct lan9303 *chip)
 	chip->ds->num_ports = LAN9303_NUM_PORTS;
 	chip->ds->priv = chip;
 	chip->ds->ops = &lan9303_switch_ops;
+	chip->ds->phylink_mac_ops = &lan9303_phylink_mac_ops;
 	base = chip->phy_addr_base;
 	chip->ds->phys_mii_mask = GENMASK(LAN9303_NUM_PORTS - 1 + base, base);
 
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index de48b194048f..a557049e34f5 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1670,11 +1670,13 @@ static void gswip_port_set_pause(struct gswip_priv *priv, int port,
 			mdio_phy, GSWIP_MDIO_PHYp(port));
 }
 
-static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
+static void gswip_phylink_mac_config(struct phylink_config *config,
 				     unsigned int mode,
 				     const struct phylink_link_state *state)
 {
-	struct gswip_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct gswip_priv *priv = dp->ds->priv;
+	int port = dp->index;
 	u32 miicfg = 0;
 
 	miicfg |= GSWIP_MII_CFG_LDCLKDIS;
@@ -1700,7 +1702,7 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
 		miicfg |= GSWIP_MII_CFG_MODE_GMII;
 		break;
 	default:
-		dev_err(ds->dev,
+		dev_err(dp->ds->dev,
 			"Unsupported interface: %d\n", state->interface);
 		return;
 	}
@@ -1726,28 +1728,32 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
 	}
 }
 
-static void gswip_phylink_mac_link_down(struct dsa_switch *ds, int port,
+static void gswip_phylink_mac_link_down(struct phylink_config *config,
 					unsigned int mode,
 					phy_interface_t interface)
 {
-	struct gswip_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct gswip_priv *priv = dp->ds->priv;
+	int port = dp->index;
 
 	gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port);
 
-	if (!dsa_is_cpu_port(ds, port))
+	if (!dsa_port_is_cpu(dp))
 		gswip_port_set_link(priv, port, false);
 }
 
-static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void gswip_phylink_mac_link_up(struct phylink_config *config,
+				      struct phy_device *phydev,
 				      unsigned int mode,
 				      phy_interface_t interface,
-				      struct phy_device *phydev,
 				      int speed, int duplex,
 				      bool tx_pause, bool rx_pause)
 {
-	struct gswip_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct gswip_priv *priv = dp->ds->priv;
+	int port = dp->index;
 
-	if (!dsa_is_cpu_port(ds, port)) {
+	if (!dsa_port_is_cpu(dp)) {
 		gswip_port_set_link(priv, port, true);
 		gswip_port_set_speed(priv, port, speed, interface);
 		gswip_port_set_duplex(priv, port, duplex);
@@ -1824,6 +1830,12 @@ static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset)
 	return ARRAY_SIZE(gswip_rmon_cnt);
 }
 
+static const struct phylink_mac_ops gswip_phylink_mac_ops = {
+	.mac_config	= gswip_phylink_mac_config,
+	.mac_link_down	= gswip_phylink_mac_link_down,
+	.mac_link_up	= gswip_phylink_mac_link_up,
+};
+
 static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
 	.get_tag_protocol	= gswip_get_tag_protocol,
 	.setup			= gswip_setup,
@@ -1842,9 +1854,6 @@ static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
 	.port_change_mtu	= gswip_port_change_mtu,
 	.port_max_mtu		= gswip_port_max_mtu,
 	.phylink_get_caps	= gswip_xrx200_phylink_get_caps,
-	.phylink_mac_config	= gswip_phylink_mac_config,
-	.phylink_mac_link_down	= gswip_phylink_mac_link_down,
-	.phylink_mac_link_up	= gswip_phylink_mac_link_up,
 	.get_strings		= gswip_get_strings,
 	.get_ethtool_stats	= gswip_get_ethtool_stats,
 	.get_sset_count		= gswip_get_sset_count,
@@ -1868,9 +1877,6 @@ static const struct dsa_switch_ops gswip_xrx300_switch_ops = {
 	.port_change_mtu	= gswip_port_change_mtu,
 	.port_max_mtu		= gswip_port_max_mtu,
 	.phylink_get_caps	= gswip_xrx300_phylink_get_caps,
-	.phylink_mac_config	= gswip_phylink_mac_config,
-	.phylink_mac_link_down	= gswip_phylink_mac_link_down,
-	.phylink_mac_link_up	= gswip_phylink_mac_link_up,
 	.get_strings		= gswip_get_strings,
 	.get_ethtool_stats	= gswip_get_ethtool_stats,
 	.get_sset_count		= gswip_get_sset_count,
@@ -2136,6 +2142,7 @@ static int gswip_probe(struct platform_device *pdev)
 	priv->ds->num_ports = priv->hw_info->max_ports;
 	priv->ds->priv = priv;
 	priv->ds->ops = priv->hw_info->ops;
+	priv->ds->phylink_mac_ops = &gswip_phylink_mac_ops;
 	priv->dev = dev;
 	mutex_init(&priv->pce_table_lock);
 	version = gswip_switch_r(priv, GSWIP_VERSION);
diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index 394ca8678d2b..c1b906c05a02 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -4,6 +4,8 @@ menuconfig NET_DSA_MICROCHIP_KSZ_COMMON
 	depends on NET_DSA
 	select NET_DSA_TAG_KSZ
 	select NET_DSA_TAG_NONE
+	select NET_IEEE8021Q_HELPERS
+	select DCB
 	help
 	  This driver adds support for Microchip KSZ9477 series switch and
 	  KSZ8795/KSZ88x3 switch chips.
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 49459a50dbc8..1cfba1ec9355 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON)	+= ksz_switch.o
-ksz_switch-objs := ksz_common.o
+ksz_switch-objs := ksz_common.o ksz_dcb.o
 ksz_switch-objs += ksz9477.o ksz9477_acl.o ksz9477_tc_flower.o
 ksz_switch-objs += ksz8795.o
 ksz_switch-objs += lan937x_main.o
diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h
index 1a5225264e6a..ae43077e76c3 100644
--- a/drivers/net/dsa/microchip/ksz8.h
+++ b/drivers/net/dsa/microchip/ksz8.h
@@ -19,8 +19,6 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port);
 void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port);
 int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
 int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
-int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
-			 u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries);
 void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt);
 void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 		    u64 *dropped, u64 *cnt);
@@ -56,9 +54,10 @@ int ksz8_reset_switch(struct ksz_device *dev);
 int ksz8_switch_init(struct ksz_device *dev);
 void ksz8_switch_exit(struct ksz_device *dev);
 int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu);
-void ksz8_phylink_mac_link_up(struct ksz_device *dev, int port,
-			      unsigned int mode, phy_interface_t interface,
-			      struct phy_device *phydev, int speed, int duplex,
+void ksz8_phylink_mac_link_up(struct phylink_config *config,
+			      struct phy_device *phydev, unsigned int mode,
+			      phy_interface_t interface, int speed, int duplex,
 			      bool tx_pause, bool rx_pause);
+int ksz8_all_queues_split(struct ksz_device *dev, int queues);
 
 #endif
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 14923535ca7e..d27b9c36d73f 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -127,37 +127,71 @@ int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu)
 	return -EOPNOTSUPP;
 }
 
-static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
+static int ksz8_port_queue_split(struct ksz_device *dev, int port, int queues)
 {
-	u8 hi, lo;
+	u8 mask_4q, mask_2q;
+	u8 reg_4q, reg_2q;
+	u8 data_4q = 0;
+	u8 data_2q = 0;
+	int ret;
 
-	/* Number of queues can only be 1, 2, or 4. */
-	switch (queue) {
-	case 4:
-	case 3:
-		queue = PORT_QUEUE_SPLIT_4;
-		break;
-	case 2:
-		queue = PORT_QUEUE_SPLIT_2;
-		break;
-	default:
-		queue = PORT_QUEUE_SPLIT_1;
+	if (ksz_is_ksz88x3(dev)) {
+		mask_4q = KSZ8873_PORT_4QUEUE_SPLIT_EN;
+		mask_2q = KSZ8873_PORT_2QUEUE_SPLIT_EN;
+		reg_4q = REG_PORT_CTRL_0;
+		reg_2q = REG_PORT_CTRL_2;
+
+		/* KSZ8795 family switches have Weighted Fair Queueing (WFQ)
+		 * enabled by default. Enable it for KSZ8873 family switches
+		 * too. Default value for KSZ8873 family is strict priority,
+		 * which should be enabled by using TC_SETUP_QDISC_ETS, not
+		 * by default.
+		 */
+		ret = ksz_rmw8(dev, REG_SW_CTRL_3, WEIGHTED_FAIR_QUEUE_ENABLE,
+			       WEIGHTED_FAIR_QUEUE_ENABLE);
+		if (ret)
+			return ret;
+	} else {
+		mask_4q = KSZ8795_PORT_4QUEUE_SPLIT_EN;
+		mask_2q = KSZ8795_PORT_2QUEUE_SPLIT_EN;
+		reg_4q = REG_PORT_CTRL_13;
+		reg_2q = REG_PORT_CTRL_0;
+
+		/* TODO: this is legacy from initial KSZ8795 driver, should be
+		 * moved to appropriate place in the future.
+		 */
+		ret = ksz_rmw8(dev, REG_SW_CTRL_19,
+			       SW_OUT_RATE_LIMIT_QUEUE_BASED,
+			       SW_OUT_RATE_LIMIT_QUEUE_BASED);
+		if (ret)
+			return ret;
 	}
-	ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo);
-	ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi);
-	lo &= ~PORT_QUEUE_SPLIT_L;
-	if (queue & PORT_QUEUE_SPLIT_2)
-		lo |= PORT_QUEUE_SPLIT_L;
-	hi &= ~PORT_QUEUE_SPLIT_H;
-	if (queue & PORT_QUEUE_SPLIT_4)
-		hi |= PORT_QUEUE_SPLIT_H;
-	ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo);
-	ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi);
-
-	/* Default is port based for egress rate limit. */
-	if (queue != PORT_QUEUE_SPLIT_1)
-		ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED,
-			true);
+
+	if (queues == 4)
+		data_4q = mask_4q;
+	else if (queues == 2)
+		data_2q = mask_2q;
+
+	ret = ksz_prmw8(dev, port, reg_4q, mask_4q, data_4q);
+	if (ret)
+		return ret;
+
+	return ksz_prmw8(dev, port, reg_2q, mask_2q, data_2q);
+}
+
+int ksz8_all_queues_split(struct ksz_device *dev, int queues)
+{
+	struct dsa_switch *ds = dev->ds;
+	const struct dsa_port *dp;
+
+	dsa_switch_for_each_port(dp, ds) {
+		int ret = ksz8_port_queue_split(dev, dp->index, queues);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
@@ -385,39 +419,39 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 	int timeout = 100;
 	const u32 *masks;
 	const u16 *regs;
+	int ret;
 
 	masks = dev->info->masks;
 	regs = dev->info->regs;
 
 	do {
-		ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+		ret = ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+		if (ret)
+			return ret;
+
 		timeout--;
 	} while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout);
 
 	/* Entry is not ready for accessing. */
-	if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) {
-		return -EAGAIN;
-	/* Entry is ready for accessing. */
-	} else {
-		ksz_read8(dev, regs[REG_IND_DATA_8], data);
+	if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY])
+		return -ETIMEDOUT;
 
-		/* There is no valid entry in the table. */
-		if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY])
-			return -ENXIO;
-	}
-	return 0;
+	/* Entry is ready for accessing. */
+	return ksz_read8(dev, regs[REG_IND_DATA_8], data);
 }
 
-int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
-			 u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries)
+static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+				u8 *fid, u8 *src_port, u16 *entries)
 {
 	u32 data_hi, data_lo;
 	const u8 *shifts;
 	const u32 *masks;
 	const u16 *regs;
 	u16 ctrl_addr;
+	u64 buf = 0;
 	u8 data;
-	int rc;
+	int cnt;
+	int ret;
 
 	shifts = dev->info->shifts;
 	masks = dev->info->masks;
@@ -426,49 +460,50 @@ int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 	ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
 
 	mutex_lock(&dev->alu_mutex);
-	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	if (ret)
+		goto unlock_alu;
+
+	ret = ksz8_valid_dyn_entry(dev, &data);
+	if (ret)
+		goto unlock_alu;
 
-	rc = ksz8_valid_dyn_entry(dev, &data);
-	if (rc == -EAGAIN) {
-		if (addr == 0)
-			*entries = 0;
-	} else if (rc == -ENXIO) {
+	if (data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY]) {
 		*entries = 0;
-	/* At least one valid entry in the table. */
-	} else {
-		u64 buf = 0;
-		int cnt;
-
-		ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
-		data_hi = (u32)(buf >> 32);
-		data_lo = (u32)buf;
-
-		/* Check out how many valid entry in the table. */
-		cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
-		cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
-		cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
-			shifts[DYNAMIC_MAC_ENTRIES];
-		*entries = cnt + 1;
-
-		*fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
-			shifts[DYNAMIC_MAC_FID];
-		*src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
-			shifts[DYNAMIC_MAC_SRC_PORT];
-		*timestamp = (data_hi & masks[DYNAMIC_MAC_TABLE_TIMESTAMP]) >>
-			shifts[DYNAMIC_MAC_TIMESTAMP];
-
-		mac_addr[5] = (u8)data_lo;
-		mac_addr[4] = (u8)(data_lo >> 8);
-		mac_addr[3] = (u8)(data_lo >> 16);
-		mac_addr[2] = (u8)(data_lo >> 24);
-
-		mac_addr[1] = (u8)data_hi;
-		mac_addr[0] = (u8)(data_hi >> 8);
-		rc = 0;
+		goto unlock_alu;
 	}
+
+	ret = ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+	if (ret)
+		goto unlock_alu;
+
+	data_hi = (u32)(buf >> 32);
+	data_lo = (u32)buf;
+
+	/* Check out how many valid entry in the table. */
+	cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
+	cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
+	cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
+		shifts[DYNAMIC_MAC_ENTRIES];
+	*entries = cnt + 1;
+
+	*fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
+		shifts[DYNAMIC_MAC_FID];
+	*src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
+		shifts[DYNAMIC_MAC_SRC_PORT];
+
+	mac_addr[5] = (u8)data_lo;
+	mac_addr[4] = (u8)(data_lo >> 8);
+	mac_addr[3] = (u8)(data_lo >> 16);
+	mac_addr[2] = (u8)(data_lo >> 24);
+
+	mac_addr[1] = (u8)data_hi;
+	mac_addr[0] = (u8)(data_hi >> 8);
+
+unlock_alu:
 	mutex_unlock(&dev->alu_mutex);
 
-	return rc;
+	return ret;
 }
 
 static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr,
@@ -1193,28 +1228,28 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
 int ksz8_fdb_dump(struct ksz_device *dev, int port,
 		  dsa_fdb_dump_cb_t *cb, void *data)
 {
-	int ret = 0;
-	u16 i = 0;
-	u16 entries = 0;
-	u8 timestamp = 0;
-	u8 fid;
-	u8 src_port;
 	u8 mac[ETH_ALEN];
+	u8 src_port, fid;
+	u16 entries = 0;
+	int ret, i;
 
-	do {
+	for (i = 0; i < KSZ8_DYN_MAC_ENTRIES; i++) {
 		ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
-					   &timestamp, &entries);
-		if (!ret && port == src_port) {
+					   &entries);
+		if (ret)
+			return ret;
+
+		if (i >= entries)
+			return 0;
+
+		if (port == src_port) {
 			ret = cb(mac, fid, false, data);
 			if (ret)
-				break;
+				return ret;
 		}
-		i++;
-	} while (i < entries);
-	if (i >= entries)
-		ret = 0;
+	}
 
-	return ret;
+	return 0;
 }
 
 static int ksz8_add_sta_mac(struct ksz_device *dev, int port,
@@ -1512,6 +1547,7 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
 	struct dsa_switch *ds = dev->ds;
 	const u32 *masks;
+	int queues;
 	u8 member;
 
 	masks = dev->info->masks;
@@ -1519,19 +1555,20 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	/* enable broadcast storm limit */
 	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
 
-	if (!ksz_is_ksz88x3(dev))
-		ksz8795_set_prio_queue(dev, port, 4);
+	/* For KSZ88x3 enable only one queue by default, otherwise we won't
+	 * be able to get rid of PCP prios on Port 2.
+	 */
+	if (ksz_is_ksz88x3(dev))
+		queues = 1;
+	else
+		queues = dev->info->num_tx_queues;
 
-	/* disable DiffServ priority */
-	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
+	ksz8_port_queue_split(dev, port, queues);
 
 	/* replace priority */
 	ksz_port_cfg(dev, port, P_802_1P_CTRL,
 		     masks[PORT_802_1P_REMAPPING], false);
 
-	/* enable 802.1p priority */
-	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
-
 	if (cpu_port)
 		member = dsa_user_ports(ds);
 	else
@@ -1701,11 +1738,15 @@ static void ksz8_cpu_port_link_up(struct ksz_device *dev, int speed, int duplex,
 		 SW_10_MBIT, ctrl);
 }
 
-void ksz8_phylink_mac_link_up(struct ksz_device *dev, int port,
-			      unsigned int mode, phy_interface_t interface,
-			      struct phy_device *phydev, int speed, int duplex,
+void ksz8_phylink_mac_link_up(struct phylink_config *config,
+			      struct phy_device *phydev, unsigned int mode,
+			      phy_interface_t interface, int speed, int duplex,
 			      bool tx_pause, bool rx_pause)
 {
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ksz_device *dev = dp->ds->priv;
+	int port = dp->index;
+
 	/* If the port is the CPU port, apply special handling. Only the CPU
 	 * port is configured via global registers.
 	 */
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index 7c9341ef73b0..69566a5d9cda 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -124,7 +124,8 @@
 #define PORT_BASED_PRIO_3		3
 #define PORT_INSERT_TAG			BIT(2)
 #define PORT_REMOVE_TAG			BIT(1)
-#define PORT_QUEUE_SPLIT_L		BIT(0)
+#define KSZ8795_PORT_2QUEUE_SPLIT_EN	BIT(0)
+#define KSZ8873_PORT_4QUEUE_SPLIT_EN	BIT(0)
 
 #define REG_PORT_1_CTRL_1		0x11
 #define REG_PORT_2_CTRL_1		0x21
@@ -143,6 +144,7 @@
 #define REG_PORT_4_CTRL_2		0x42
 #define REG_PORT_5_CTRL_2		0x52
 
+#define KSZ8873_PORT_2QUEUE_SPLIT_EN	BIT(7)
 #define PORT_INGRESS_FILTER		BIT(6)
 #define PORT_DISCARD_NON_VID		BIT(5)
 #define PORT_FORCE_FLOW_CTRL		BIT(4)
@@ -463,10 +465,7 @@
 #define REG_PORT_4_CTRL_13		0xE1
 #define REG_PORT_5_CTRL_13		0xF1
 
-#define PORT_QUEUE_SPLIT_H		BIT(1)
-#define PORT_QUEUE_SPLIT_1		0
-#define PORT_QUEUE_SPLIT_2		1
-#define PORT_QUEUE_SPLIT_4		2
+#define KSZ8795_PORT_4QUEUE_SPLIT_EN	BIT(1)
 #define PORT_DROP_TAG			BIT(0)
 
 #define REG_PORT_1_CTRL_14		0xB2
@@ -794,5 +793,6 @@
 #define TAIL_TAG_LOOKUP			BIT(7)
 
 #define FID_ENTRIES			128
+#define KSZ8_DYN_MAC_ENTRIES		1024
 
 #endif
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 7f745628c84d..f8ad7833f5d9 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1158,18 +1158,12 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	/* enable broadcast storm limit */
 	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
 
-	/* disable DiffServ priority */
-	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
-
 	/* replace priority */
 	ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
 		     false);
 	ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
 			   MTI_PVID_REPLACE, false);
 
-	/* enable 802.1p priority */
-	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
-
 	/* force flow control for non-PHY ports only */
 	ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
 		     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
diff --git a/drivers/net/dsa/microchip/ksz9477_tc_flower.c b/drivers/net/dsa/microchip/ksz9477_tc_flower.c
index 8b2f5be667e0..ca7830ab168a 100644
--- a/drivers/net/dsa/microchip/ksz9477_tc_flower.c
+++ b/drivers/net/dsa/microchip/ksz9477_tc_flower.c
@@ -124,6 +124,9 @@ static int ksz9477_flower_parse_key(struct ksz_device *dev, int port,
 		return -EOPNOTSUPP;
 	}
 
+	if (flow_rule_match_has_control_flags(rule, extack))
+		return -EOPNOTSUPP;
+
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC) ||
 	    flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
 		ret = ksz9477_flower_parse_key_l2(dev, port, extack, rule,
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 2b510f150dd8..1e0085cd9a9a 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -24,10 +24,12 @@
 #include <linux/of_net.h>
 #include <linux/micrel_phy.h>
 #include <net/dsa.h>
+#include <net/ieee8021q.h>
 #include <net/pkt_cls.h>
 #include <net/switchdev.h>
 
 #include "ksz_common.h"
+#include "ksz_dcb.h"
 #include "ksz_ptp.h"
 #include "ksz8.h"
 #include "ksz9477.h"
@@ -253,6 +255,28 @@ static const struct ksz_drive_strength ksz8830_drive_strengths[] = {
 	{ KSZ8873_DRIVE_STRENGTH_16MA, 16000 },
 };
 
+static void ksz8830_phylink_mac_config(struct phylink_config *config,
+				       unsigned int mode,
+				       const struct phylink_link_state *state);
+static void ksz_phylink_mac_config(struct phylink_config *config,
+				   unsigned int mode,
+				   const struct phylink_link_state *state);
+static void ksz_phylink_mac_link_down(struct phylink_config *config,
+				      unsigned int mode,
+				      phy_interface_t interface);
+
+static const struct phylink_mac_ops ksz8830_phylink_mac_ops = {
+	.mac_config	= ksz8830_phylink_mac_config,
+	.mac_link_down	= ksz_phylink_mac_link_down,
+	.mac_link_up	= ksz8_phylink_mac_link_up,
+};
+
+static const struct phylink_mac_ops ksz8_phylink_mac_ops = {
+	.mac_config	= ksz_phylink_mac_config,
+	.mac_link_down	= ksz_phylink_mac_link_down,
+	.mac_link_up	= ksz8_phylink_mac_link_up,
+};
+
 static const struct ksz_dev_ops ksz8_dev_ops = {
 	.setup = ksz8_setup,
 	.get_port_addr = ksz8_get_port_addr,
@@ -277,7 +301,6 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
 	.mirror_add = ksz8_port_mirror_add,
 	.mirror_del = ksz8_port_mirror_del,
 	.get_caps = ksz8_get_caps,
-	.phylink_mac_link_up = ksz8_phylink_mac_link_up,
 	.config_cpu_port = ksz8_config_cpu_port,
 	.enable_stp_addr = ksz8_enable_stp_addr,
 	.reset = ksz8_reset_switch,
@@ -286,13 +309,19 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
 	.change_mtu = ksz8_change_mtu,
 };
 
-static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+static void ksz9477_phylink_mac_link_up(struct phylink_config *config,
+					struct phy_device *phydev,
 					unsigned int mode,
 					phy_interface_t interface,
-					struct phy_device *phydev, int speed,
-					int duplex, bool tx_pause,
+					int speed, int duplex, bool tx_pause,
 					bool rx_pause);
 
+static const struct phylink_mac_ops ksz9477_phylink_mac_ops = {
+	.mac_config	= ksz_phylink_mac_config,
+	.mac_link_down	= ksz_phylink_mac_link_down,
+	.mac_link_up	= ksz9477_phylink_mac_link_up,
+};
+
 static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.setup = ksz9477_setup,
 	.get_port_addr = ksz9477_get_port_addr,
@@ -319,7 +348,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.mdb_add = ksz9477_mdb_add,
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = ksz9477_change_mtu,
-	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.get_wol = ksz9477_get_wol,
 	.set_wol = ksz9477_set_wol,
 	.wol_pre_shutdown = ksz9477_wol_pre_shutdown,
@@ -331,6 +359,12 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.exit = ksz9477_switch_exit,
 };
 
+static const struct phylink_mac_ops lan937x_phylink_mac_ops = {
+	.mac_config	= ksz_phylink_mac_config,
+	.mac_link_down	= ksz_phylink_mac_link_down,
+	.mac_link_up	= ksz9477_phylink_mac_link_up,
+};
+
 static const struct ksz_dev_ops lan937x_dev_ops = {
 	.setup = lan937x_setup,
 	.teardown = lan937x_teardown,
@@ -359,7 +393,6 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
 	.mdb_add = ksz9477_mdb_add,
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = lan937x_change_mtu,
-	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.config_cpu_port = lan937x_config_cpu_port,
 	.tc_cbs_set_cinc = lan937x_tc_cbs_set_cinc,
 	.enable_stp_addr = ksz9477_enable_stp_addr,
@@ -1194,9 +1227,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 3,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1223,7 +1257,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
 		.num_tx_queues = 4,
+		.num_ipms = 4,
 		.ops = &ksz8_dev_ops,
+		.phylink_mac_ops = &ksz8_phylink_mac_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1262,7 +1298,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
 		.num_tx_queues = 4,
+		.num_ipms = 4,
 		.ops = &ksz8_dev_ops,
+		.phylink_mac_ops = &ksz8_phylink_mac_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1287,7 +1325,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
 		.num_tx_queues = 4,
+		.num_ipms = 4,
 		.ops = &ksz8_dev_ops,
+		.phylink_mac_ops = &ksz8_phylink_mac_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1312,7 +1352,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x4,	/* can be configured as cpu port */
 		.port_cnt = 3,
 		.num_tx_queues = 4,
+		.num_ipms = 4,
 		.ops = &ksz8_dev_ops,
+		.phylink_mac_ops = &ksz8830_phylink_mac_ops,
 		.mib_names = ksz88xx_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1336,9 +1378,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 4,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1370,7 +1413,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 6,		/* total physical port count */
 		.port_nirqs = 2,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1402,7 +1447,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 2,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1432,7 +1479,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 2,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1458,9 +1507,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 3,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1486,9 +1536,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total port count */
 		.port_nirqs = 3,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1519,8 +1570,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 3,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &ksz9477_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1551,9 +1602,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 5,		/* total physical port count */
 		.port_nirqs = 6,
 		.num_tx_queues = 8,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &lan937x_dev_ops,
+		.phylink_mac_ops = &lan937x_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1578,9 +1630,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 6,		/* total physical port count */
 		.port_nirqs = 6,
 		.num_tx_queues = 8,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &lan937x_dev_ops,
+		.phylink_mac_ops = &lan937x_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1605,9 +1658,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 8,		/* total physical port count */
 		.port_nirqs = 6,
 		.num_tx_queues = 8,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &lan937x_dev_ops,
+		.phylink_mac_ops = &lan937x_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1636,9 +1690,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 5,		/* total physical port count */
 		.port_nirqs = 6,
 		.num_tx_queues = 8,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &lan937x_dev_ops,
+		.phylink_mac_ops = &lan937x_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1667,9 +1722,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 8,		/* total physical port count */
 		.port_nirqs = 6,
 		.num_tx_queues = 8,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &lan937x_dev_ops,
+		.phylink_mac_ops = &lan937x_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -2304,6 +2360,7 @@ static int ksz_setup(struct dsa_switch *ds)
 	ksz_init_mib_timer(dev);
 
 	ds->configure_vlan_while_not_filtering = false;
+	ds->dscp_prio_mapping_is_global = true;
 
 	if (dev->dev_ops->setup) {
 		ret = dev->dev_ops->setup(ds);
@@ -2347,6 +2404,10 @@ static int ksz_setup(struct dsa_switch *ds)
 		goto out_ptp_clock_unregister;
 	}
 
+	ret = ksz_dcb_init(dev);
+	if (ret)
+		goto out_ptp_clock_unregister;
+
 	/* start switch */
 	regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL],
 			   SW_START, SW_START);
@@ -2523,14 +2584,15 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
 	return 0;
 }
 
-static void ksz_mac_link_down(struct dsa_switch *ds, int port,
-			      unsigned int mode, phy_interface_t interface)
+static void ksz_phylink_mac_link_down(struct phylink_config *config,
+				      unsigned int mode,
+				      phy_interface_t interface)
 {
-	struct ksz_device *dev = ds->priv;
-	struct ksz_port *p = &dev->ports[port];
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ksz_device *dev = dp->ds->priv;
 
 	/* Read all MIB counters when the link is going down. */
-	p->read = true;
+	dev->ports[dp->index].read = true;
 	/* timer started */
 	if (dev->mib_read_interval)
 		schedule_delayed_work(&dev->mib_read, 0);
@@ -2660,9 +2722,33 @@ static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
 	return dev->dev_ops->mdb_del(dev, port, mdb, db);
 }
 
+static int ksz9477_set_default_prio_queue_mapping(struct ksz_device *dev,
+						  int port)
+{
+	u32 queue_map = 0;
+	int ipm;
+
+	for (ipm = 0; ipm < dev->info->num_ipms; ipm++) {
+		int queue;
+
+		/* Traffic Type (TT) is corresponding to the Internal Priority
+		 * Map (IPM) in the switch. Traffic Class (TC) is
+		 * corresponding to the queue in the switch.
+		 */
+		queue = ieee8021q_tt_to_tc(ipm, dev->info->num_tx_queues);
+		if (queue < 0)
+			return queue;
+
+		queue_map |= queue << (ipm * KSZ9477_PORT_TC_MAP_S);
+	}
+
+	return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
+}
+
 static int ksz_port_setup(struct dsa_switch *ds, int port)
 {
 	struct ksz_device *dev = ds->priv;
+	int ret;
 
 	if (!dsa_is_user_port(ds, port))
 		return 0;
@@ -2670,11 +2756,17 @@ static int ksz_port_setup(struct dsa_switch *ds, int port)
 	/* setup user port */
 	dev->dev_ops->port_setup(dev, port, false);
 
+	if (!is_ksz8(dev)) {
+		ret = ksz9477_set_default_prio_queue_mapping(dev, port);
+		if (ret)
+			return ret;
+	}
+
 	/* port_stp_state_set() will be called after to enable the port so
 	 * there is no need to do anything.
 	 */
 
-	return 0;
+	return ksz_dcb_init_port(dev, port);
 }
 
 void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
@@ -3065,16 +3157,23 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
 	return interface;
 }
 
-static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
+static void ksz8830_phylink_mac_config(struct phylink_config *config,
+				       unsigned int mode,
+				       const struct phylink_link_state *state)
+{
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ksz_device *dev = dp->ds->priv;
+
+	dev->ports[dp->index].manual_flow = !(state->pause & MLO_PAUSE_AN);
+}
+
+static void ksz_phylink_mac_config(struct phylink_config *config,
 				   unsigned int mode,
 				   const struct phylink_link_state *state)
 {
-	struct ksz_device *dev = ds->priv;
-
-	if (ksz_is_ksz88x3(dev)) {
-		dev->ports[port].manual_flow = !(state->pause & MLO_PAUSE_AN);
-		return;
-	}
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ksz_device *dev = dp->ds->priv;
+	int port = dp->index;
 
 	/* Internal PHYs */
 	if (dev->info->internal_phy[port])
@@ -3087,9 +3186,6 @@ static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
 
 	ksz_set_xmii(dev, port, state->interface);
 
-	if (dev->dev_ops->phylink_mac_config)
-		dev->dev_ops->phylink_mac_config(dev, port, mode, state);
-
 	if (dev->dev_ops->setup_rgmii_delay)
 		dev->dev_ops->setup_rgmii_delay(dev, port);
 }
@@ -3187,13 +3283,16 @@ static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
 	ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
 }
 
-static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+static void ksz9477_phylink_mac_link_up(struct phylink_config *config,
+					struct phy_device *phydev,
 					unsigned int mode,
 					phy_interface_t interface,
-					struct phy_device *phydev, int speed,
-					int duplex, bool tx_pause,
+					int speed, int duplex, bool tx_pause,
 					bool rx_pause)
 {
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ksz_device *dev = dp->ds->priv;
+	int port = dp->index;
 	struct ksz_port *p;
 
 	p = &dev->ports[port];
@@ -3209,18 +3308,6 @@ static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
 	ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
 }
 
-static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
-				    unsigned int mode,
-				    phy_interface_t interface,
-				    struct phy_device *phydev, int speed,
-				    int duplex, bool tx_pause, bool rx_pause)
-{
-	struct ksz_device *dev = ds->priv;
-
-	dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface, phydev,
-					  speed, duplex, tx_pause, rx_pause);
-}
-
 static int ksz_switch_detect(struct ksz_device *dev)
 {
 	u8 id1, id2, id4;
@@ -3522,7 +3609,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port,
 	for (tc_prio = 0; tc_prio < ARRAY_SIZE(p->priomap); tc_prio++) {
 		int queue;
 
-		if (tc_prio > KSZ9477_MAX_TC_PRIO)
+		if (tc_prio >= dev->info->num_ipms)
 			break;
 
 		queue = ksz_ets_band_to_queue(p, p->priomap[tc_prio]);
@@ -3534,8 +3621,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port,
 
 static int ksz_tc_ets_del(struct ksz_device *dev, int port)
 {
-	int ret, queue, tc_prio, s;
-	u32 queue_map = 0;
+	int ret, queue;
 
 	/* To restore the default chip configuration, set all queues to use the
 	 * WRR scheduler with a weight of 1.
@@ -3547,31 +3633,10 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port)
 			return ret;
 	}
 
-	switch (dev->info->num_tx_queues) {
-	case 2:
-		s = 2;
-		break;
-	case 4:
-		s = 1;
-		break;
-	case 8:
-		s = 0;
-		break;
-	default:
-		return -EINVAL;
-	}
-
 	/* Revert the queue mapping for TC-priority to its default setting on
 	 * the chip.
 	 */
-	for (tc_prio = 0; tc_prio <= KSZ9477_MAX_TC_PRIO; tc_prio++) {
-		int queue;
-
-		queue = tc_prio >> s;
-		queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S);
-	}
-
-	return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
+	return ksz9477_set_default_prio_queue_mapping(dev, port);
 }
 
 static int ksz_tc_ets_validate(struct ksz_device *dev, int port,
@@ -3616,7 +3681,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port,
 	struct ksz_device *dev = ds->priv;
 	int ret;
 
-	if (!dev->info->tc_ets_supported)
+	if (is_ksz8(dev))
 		return -EOPNOTSUPP;
 
 	if (qopt->parent != TC_H_ROOT) {
@@ -3881,9 +3946,6 @@ static const struct dsa_switch_ops ksz_switch_ops = {
 	.phy_read		= ksz_phy_read16,
 	.phy_write		= ksz_phy_write16,
 	.phylink_get_caps	= ksz_phylink_get_caps,
-	.phylink_mac_config	= ksz_phylink_mac_config,
-	.phylink_mac_link_up	= ksz_phylink_mac_link_up,
-	.phylink_mac_link_down	= ksz_mac_link_down,
 	.port_setup		= ksz_port_setup,
 	.set_ageing_time	= ksz_set_ageing_time,
 	.get_strings		= ksz_get_strings,
@@ -3925,6 +3987,13 @@ static const struct dsa_switch_ops ksz_switch_ops = {
 	.port_setup_tc		= ksz_setup_tc,
 	.get_mac_eee		= ksz_get_mac_eee,
 	.set_mac_eee		= ksz_set_mac_eee,
+	.port_get_default_prio	= ksz_port_get_default_prio,
+	.port_set_default_prio	= ksz_port_set_default_prio,
+	.port_get_dscp_prio	= ksz_port_get_dscp_prio,
+	.port_add_dscp_prio	= ksz_port_add_dscp_prio,
+	.port_del_dscp_prio	= ksz_port_del_dscp_prio,
+	.port_get_apptrust	= ksz_port_get_apptrust,
+	.port_set_apptrust	= ksz_port_set_apptrust,
 };
 
 struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
@@ -4328,6 +4397,9 @@ int ksz_switch_register(struct ksz_device *dev)
 	/* set the real number of ports */
 	dev->ds->num_ports = dev->info->port_cnt;
 
+	/* set the phylink ops */
+	dev->ds->phylink_mac_ops = dev->info->phylink_mac_ops;
+
 	/* Host port interface will be self detected, or specifically set in
 	 * device tree.
 	 */
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 40c11b0d6b62..c784fd23a993 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -19,9 +19,13 @@
 #include "ksz_ptp.h"
 
 #define KSZ_MAX_NUM_PORTS 8
+/* all KSZ switches count ports from 1 */
+#define KSZ_PORT_1 0
+#define KSZ_PORT_2 1
 
 struct ksz_device;
 struct ksz_port;
+struct phylink_mac_ops;
 
 enum ksz_regmap_width {
 	KSZ_REGMAP_8,
@@ -58,9 +62,10 @@ struct ksz_chip_data {
 	int port_cnt;
 	u8 port_nirqs;
 	u8 num_tx_queues;
+	u8 num_ipms; /* number of Internal Priority Maps */
 	bool tc_cbs_supported;
-	bool tc_ets_supported;
 	const struct ksz_dev_ops *ops;
+	const struct phylink_mac_ops *phylink_mac_ops;
 	bool ksz87xx_eee_link_erratum;
 	const struct ksz_mib_names *mib_names;
 	int mib_cnt;
@@ -349,9 +354,6 @@ struct ksz_dev_ops {
 	int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
 	void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
 	void (*port_init_cnt)(struct ksz_device *dev, int port);
-	void (*phylink_mac_config)(struct ksz_device *dev, int port,
-				   unsigned int mode,
-				   const struct phylink_link_state *state);
 	void (*phylink_mac_link_up)(struct ksz_device *dev, int port,
 				    unsigned int mode,
 				    phy_interface_t interface,
@@ -620,6 +622,11 @@ static inline bool ksz_is_ksz88x3(struct ksz_device *dev)
 	return dev->chip_id == KSZ8830_CHIP_ID;
 }
 
+static inline bool is_ksz8(struct ksz_device *dev)
+{
+	return ksz_is_ksz87xx(dev) || ksz_is_ksz88x3(dev);
+}
+
 static inline int is_lan937x(struct ksz_device *dev)
 {
 	return dev->chip_id == LAN9370_CHIP_ID ||
@@ -722,7 +729,6 @@ static inline int is_lan937x(struct ksz_device *dev)
 #define KSZ9477_PORT_MRI_TC_MAP__4	0x0808
 
 #define KSZ9477_PORT_TC_MAP_S		4
-#define KSZ9477_MAX_TC_PRIO		7
 
 /* CBS related registers */
 #define REG_PORT_MTI_QUEUE_INDEX__4	0x0900
diff --git a/drivers/net/dsa/microchip/ksz_dcb.c b/drivers/net/dsa/microchip/ksz_dcb.c
new file mode 100644
index 000000000000..a97106327562
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_dcb.c
@@ -0,0 +1,809 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+#include <linux/dsa/ksz_common.h>
+#include <net/dsa.h>
+#include <net/dscp.h>
+#include <net/ieee8021q.h>
+
+#include "ksz_common.h"
+#include "ksz_dcb.h"
+#include "ksz8.h"
+
+#define KSZ8_REG_PORT_1_CTRL_0			0x10
+#define KSZ8_PORT_DIFFSERV_ENABLE		BIT(6)
+#define KSZ8_PORT_802_1P_ENABLE			BIT(5)
+#define KSZ8_PORT_BASED_PRIO_M			GENMASK(4, 3)
+
+#define KSZ88X3_REG_TOS_DSCP_CTRL		0x60
+#define KSZ8765_REG_TOS_DSCP_CTRL		0x90
+
+#define KSZ9477_REG_SW_MAC_TOS_CTRL		0x033e
+#define KSZ9477_SW_TOS_DSCP_REMAP		BIT(0)
+#define KSZ9477_SW_TOS_DSCP_DEFAULT_PRIO_M	GENMASK(5, 3)
+
+#define KSZ9477_REG_DIFFSERV_PRIO_MAP		0x0340
+
+#define KSZ9477_REG_PORT_MRI_PRIO_CTRL		0x0801
+#define KSZ9477_PORT_HIGHEST_PRIO		BIT(7)
+#define KSZ9477_PORT_OR_PRIO			BIT(6)
+#define KSZ9477_PORT_MAC_PRIO_ENABLE		BIT(4)
+#define KSZ9477_PORT_VLAN_PRIO_ENABLE		BIT(3)
+#define KSZ9477_PORT_802_1P_PRIO_ENABLE		BIT(2)
+#define KSZ9477_PORT_DIFFSERV_PRIO_ENABLE	BIT(1)
+#define KSZ9477_PORT_ACL_PRIO_ENABLE		BIT(0)
+
+#define KSZ9477_REG_PORT_MRI_MAC_CTRL		0x0802
+#define KSZ9477_PORT_BASED_PRIO_M		GENMASK(2, 0)
+
+struct ksz_apptrust_map {
+	u8 apptrust;
+	u8 bit;
+};
+
+static const struct ksz_apptrust_map ksz8_apptrust_map_to_bit[] = {
+	{ DCB_APP_SEL_PCP, KSZ8_PORT_802_1P_ENABLE },
+	{ IEEE_8021QAZ_APP_SEL_DSCP, KSZ8_PORT_DIFFSERV_ENABLE },
+};
+
+static const struct ksz_apptrust_map ksz9477_apptrust_map_to_bit[] = {
+	{ DCB_APP_SEL_PCP, KSZ9477_PORT_802_1P_PRIO_ENABLE },
+	{ IEEE_8021QAZ_APP_SEL_DSCP, KSZ9477_PORT_DIFFSERV_PRIO_ENABLE },
+};
+
+/* ksz_supported_apptrust[] - Supported apptrust selectors and Priority Order
+ *			      of Internal Priority Map (IPM) sources.
+ *
+ * This array defines the apptrust selectors supported by the hardware, where
+ * the index within the array indicates the priority of the selector - lower
+ * indices correspond to higher priority. This fixed priority scheme is due to
+ * the hardware's design, which does not support configurable priority among
+ * different priority sources.
+ *
+ * The priority sources, including Tail Tag, ACL, VLAN PCP and DSCP are ordered
+ * by the hardware's fixed logic, as detailed below. The order reflects a
+ * non-configurable precedence where certain types of priority information
+ * override others:
+ *
+ * 1. Tail Tag - Highest priority, overrides ACL, VLAN PCP, and DSCP priorities.
+ * 2. ACL - Overrides VLAN PCP and DSCP priorities.
+ * 3. VLAN PCP - Overrides DSCP priority.
+ * 4. DSCP - Lowest priority, does not override any other priority source.
+ *
+ * In this context, the array's lower index (higher priority) for
+ * 'DCB_APP_SEL_PCP' suggests its relative priority over
+ * 'IEEE_8021QAZ_APP_SEL_DSCP' within the system's fixed priority scheme.
+ *
+ * DCB_APP_SEL_PCP - Priority Code Point selector
+ * IEEE_8021QAZ_APP_SEL_DSCP - Differentiated Services Code Point selector
+ */
+static const u8 ksz_supported_apptrust[] = {
+	DCB_APP_SEL_PCP,
+	IEEE_8021QAZ_APP_SEL_DSCP,
+};
+
+static const char * const ksz_supported_apptrust_variants[] = {
+	"empty", "dscp", "pcp", "dscp pcp"
+};
+
+static void ksz_get_default_port_prio_reg(struct ksz_device *dev, int *reg,
+					  u8 *mask, int *shift)
+{
+	if (is_ksz8(dev)) {
+		*reg = KSZ8_REG_PORT_1_CTRL_0;
+		*mask = KSZ8_PORT_BASED_PRIO_M;
+		*shift = __bf_shf(KSZ8_PORT_BASED_PRIO_M);
+	} else {
+		*reg = KSZ9477_REG_PORT_MRI_MAC_CTRL;
+		*mask = KSZ9477_PORT_BASED_PRIO_M;
+		*shift = __bf_shf(KSZ9477_PORT_BASED_PRIO_M);
+	}
+}
+
+/**
+ * ksz_get_dscp_prio_reg - Retrieves the DSCP-to-priority-mapping register
+ * @dev: Pointer to the KSZ switch device structure
+ * @reg: Pointer to the register address to be set
+ * @per_reg: Pointer to the number of DSCP values per register
+ * @mask: Pointer to the mask to be set
+ *
+ * This function retrieves the DSCP to priority mapping register, the number of
+ * DSCP values per register, and the mask to be set.
+ */
+static void ksz_get_dscp_prio_reg(struct ksz_device *dev, int *reg,
+				  int *per_reg, u8 *mask)
+{
+	if (ksz_is_ksz87xx(dev)) {
+		*reg = KSZ8765_REG_TOS_DSCP_CTRL;
+		*per_reg = 4;
+		*mask = GENMASK(1, 0);
+	} else if (ksz_is_ksz88x3(dev)) {
+		*reg = KSZ88X3_REG_TOS_DSCP_CTRL;
+		*per_reg = 4;
+		*mask = GENMASK(1, 0);
+	} else {
+		*reg = KSZ9477_REG_DIFFSERV_PRIO_MAP;
+		*per_reg = 2;
+		*mask = GENMASK(2, 0);
+	}
+}
+
+/**
+ * ksz_get_apptrust_map_and_reg - Retrieves the apptrust map and register
+ * @dev: Pointer to the KSZ switch device structure
+ * @map: Pointer to the apptrust map to be set
+ * @reg: Pointer to the register address to be set
+ * @mask: Pointer to the mask to be set
+ *
+ * This function retrieves the apptrust map and register address for the
+ * apptrust configuration.
+ */
+static void ksz_get_apptrust_map_and_reg(struct ksz_device *dev,
+					 const struct ksz_apptrust_map **map,
+					 int *reg, u8 *mask)
+{
+	if (is_ksz8(dev)) {
+		*map = ksz8_apptrust_map_to_bit;
+		*reg = KSZ8_REG_PORT_1_CTRL_0;
+		*mask = KSZ8_PORT_DIFFSERV_ENABLE | KSZ8_PORT_802_1P_ENABLE;
+	} else {
+		*map = ksz9477_apptrust_map_to_bit;
+		*reg = KSZ9477_REG_PORT_MRI_PRIO_CTRL;
+		*mask = KSZ9477_PORT_802_1P_PRIO_ENABLE |
+			KSZ9477_PORT_DIFFSERV_PRIO_ENABLE;
+	}
+}
+
+/**
+ * ksz_port_get_default_prio - Retrieves the default priority for a port on a
+ *			       KSZ switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number from which to get the default priority
+ *
+ * This function fetches the default priority for the specified port on a KSZ
+ * switch.
+ *
+ * Return: The default priority of the port on success, or a negative error
+ * code on failure.
+ */
+int ksz_port_get_default_prio(struct dsa_switch *ds, int port)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret, reg, shift;
+	u8 data, mask;
+
+	ksz_get_default_port_prio_reg(dev, &reg, &mask, &shift);
+
+	ret = ksz_pread8(dev, port, reg, &data);
+	if (ret)
+		return ret;
+
+	return (data & mask) >> shift;
+}
+
+/**
+ * ksz88x3_port_set_default_prio_quirks - Quirks for default priority
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the default priority
+ * @prio: Priority value to set
+ *
+ * This function implements quirks for setting the default priority on KSZ88x3
+ * devices. On Port 2, no other priority providers are working
+ * except of PCP. So, configuring default priority on Port 2 is not possible.
+ * On Port 1, it is not possible to configure port priority if PCP
+ * apptrust on Port 2 is disabled. Since we disable multiple queues on the
+ * switch to disable PCP on Port 2, we need to ensure that the default priority
+ * configuration on Port 1 is in agreement with the configuration on Port 2.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port_set_default_prio_quirks(struct ksz_device *dev, int port,
+						u8 prio)
+{
+	if (!prio)
+		return 0;
+
+	if (port == KSZ_PORT_2) {
+		dev_err(dev->dev, "Port priority configuration is not working on Port 2\n");
+		return -EINVAL;
+	} else if (port == KSZ_PORT_1) {
+		u8 port2_data;
+		int ret;
+
+		ret = ksz_pread8(dev, KSZ_PORT_2, KSZ8_REG_PORT_1_CTRL_0,
+				 &port2_data);
+		if (ret)
+			return ret;
+
+		if (!(port2_data & KSZ8_PORT_802_1P_ENABLE)) {
+			dev_err(dev->dev, "Not possible to configure port priority on Port 1 if PCP apptrust on Port 2 is disabled\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ksz_port_set_default_prio - Sets the default priority for a port on a KSZ
+ *			       switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to set the default priority
+ * @prio: Priority value to set
+ *
+ * This function sets the default priority for the specified port on a KSZ
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
+int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio)
+{
+	struct ksz_device *dev = ds->priv;
+	int reg, shift, ret;
+	u8 mask;
+
+	if (prio >= dev->info->num_ipms)
+		return -EINVAL;
+
+	if (ksz_is_ksz88x3(dev)) {
+		ret = ksz88x3_port_set_default_prio_quirks(dev, port, prio);
+		if (ret)
+			return ret;
+	}
+
+	ksz_get_default_port_prio_reg(dev, &reg, &mask, &shift);
+
+	return ksz_prmw8(dev, port, reg, mask, (prio << shift) & mask);
+}
+
+/**
+ * ksz_port_get_dscp_prio - Retrieves the priority for a DSCP value on a KSZ
+ *			    switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to get the priority
+ * @dscp: DSCP value for which to get the priority
+ *
+ * This function fetches the priority value from switch global DSCP-to-priorty
+ * mapping table for the specified DSCP value.
+ *
+ * Return: The priority value for the DSCP on success, or a negative error
+ * code on failure.
+ */
+int ksz_port_get_dscp_prio(struct dsa_switch *ds, int port, u8 dscp)
+{
+	struct ksz_device *dev = ds->priv;
+	int reg, per_reg, ret, shift;
+	u8 data, mask;
+
+	ksz_get_dscp_prio_reg(dev, &reg, &per_reg, &mask);
+
+	/* If DSCP remapping is disabled, DSCP bits 3-5 are used as Internal
+	 * Priority Map (IPM)
+	 */
+	if (!is_ksz8(dev)) {
+		ret = ksz_read8(dev, KSZ9477_REG_SW_MAC_TOS_CTRL, &data);
+		if (ret)
+			return ret;
+
+		/* If DSCP remapping is disabled, DSCP bits 3-5 are used as
+		 * Internal Priority Map (IPM)
+		 */
+		if (!(data & KSZ9477_SW_TOS_DSCP_REMAP))
+			return FIELD_GET(KSZ9477_SW_TOS_DSCP_DEFAULT_PRIO_M,
+					 dscp);
+	}
+
+	/* In case DSCP remapping is enabled, we need to write the DSCP to
+	 * priority mapping table.
+	 */
+	reg += dscp / per_reg;
+	ret = ksz_read8(dev, reg, &data);
+	if (ret)
+		return ret;
+
+	shift = (dscp % per_reg) * (8 / per_reg);
+
+	return (data >> shift) & mask;
+}
+
+/**
+ * ksz_set_global_dscp_entry - Sets the global DSCP-to-priority mapping entry
+ * @dev: Pointer to the KSZ switch device structure
+ * @dscp: DSCP value for which to set the priority
+ * @ipm: Priority value to set
+ *
+ * This function sets the global DSCP-to-priority mapping entry for the
+ * specified DSCP value.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
+static int ksz_set_global_dscp_entry(struct ksz_device *dev, u8 dscp, u8 ipm)
+{
+	int reg, per_reg, shift;
+	u8 mask;
+
+	ksz_get_dscp_prio_reg(dev, &reg, &per_reg, &mask);
+
+	shift = (dscp % per_reg) * (8 / per_reg);
+
+	return ksz_rmw8(dev, reg + (dscp / per_reg), mask << shift,
+			ipm << shift);
+}
+
+/**
+ * ksz_init_global_dscp_map - Initializes the global DSCP-to-priority mapping
+ * @dev: Pointer to the KSZ switch device structure
+ *
+ * This function initializes the global DSCP-to-priority mapping table for the
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz_init_global_dscp_map(struct ksz_device *dev)
+{
+	int ret, dscp;
+
+	/* On KSZ9xxx variants, DSCP remapping is disabled by default.
+	 * Enable to have, predictable and reproducible behavior across
+	 * different devices.
+	 */
+	if (!is_ksz8(dev)) {
+		ret = ksz_rmw8(dev, KSZ9477_REG_SW_MAC_TOS_CTRL,
+			       KSZ9477_SW_TOS_DSCP_REMAP,
+			       KSZ9477_SW_TOS_DSCP_REMAP);
+		if (ret)
+			return ret;
+	}
+
+	for (dscp = 0; dscp < DSCP_MAX; dscp++) {
+		int ipm, tt;
+
+		/* Map DSCP to Traffic Type, which is corresponding to the
+		 * Internal Priority Map (IPM) in the switch.
+		 */
+		if (!is_ksz8(dev)) {
+			ipm = ietf_dscp_to_ieee8021q_tt(dscp);
+		} else {
+			/* On KSZ8xxx variants we do not have IPM to queue
+			 * remapping table. We need to convert DSCP to Traffic
+			 * Type and then to queue.
+			 */
+			tt = ietf_dscp_to_ieee8021q_tt(dscp);
+			if (tt < 0)
+				return tt;
+
+			ipm = ieee8021q_tt_to_tc(tt, dev->info->num_tx_queues);
+		}
+
+		if (ipm < 0)
+			return ipm;
+
+		ret = ksz_set_global_dscp_entry(dev, dscp, ipm);
+	}
+
+	return 0;
+}
+
+/**
+ * ksz_port_add_dscp_prio - Adds a DSCP-to-priority mapping entry for a port on
+ *			    a KSZ switch.
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to add the DSCP-to-priority mapping entry
+ * @dscp: DSCP value for which to add the priority
+ * @prio: Priority value to set
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_add_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (prio >= dev->info->num_ipms)
+		return -ERANGE;
+
+	return ksz_set_global_dscp_entry(dev, dscp, prio);
+}
+
+/**
+ * ksz_port_del_dscp_prio - Deletes a DSCP-to-priority mapping entry for a port
+ *			    on a KSZ switch.
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to delete the DSCP-to-priority mapping entry
+ * @dscp: DSCP value for which to delete the priority
+ * @prio: Priority value to delete
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_del_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio)
+{
+	struct ksz_device *dev = ds->priv;
+	int ipm;
+
+	if (ksz_port_get_dscp_prio(ds, port, dscp) != prio)
+		return 0;
+
+	if (is_ksz8(dev)) {
+		ipm = ieee8021q_tt_to_tc(IEEE8021Q_TT_BE,
+					 dev->info->num_tx_queues);
+		if (ipm < 0)
+			return ipm;
+	} else {
+		ipm = IEEE8021Q_TT_BE;
+	}
+
+	return ksz_set_global_dscp_entry(dev, dscp, ipm);
+}
+
+/**
+ * ksz_apptrust_error - Prints an error message for an invalid apptrust selector
+ * @dev: Pointer to the KSZ switch device structure
+ *
+ * This function prints an error message when an invalid apptrust selector is
+ * provided.
+ */
+static void ksz_apptrust_error(struct ksz_device *dev)
+{
+	char supported_apptrust_variants[64];
+	int i;
+
+	supported_apptrust_variants[0] = '\0';
+	for (i = 0; i < ARRAY_SIZE(ksz_supported_apptrust_variants); i++) {
+		if (i > 0)
+			strlcat(supported_apptrust_variants, ", ",
+				sizeof(supported_apptrust_variants));
+		strlcat(supported_apptrust_variants,
+			ksz_supported_apptrust_variants[i],
+			sizeof(supported_apptrust_variants));
+	}
+
+	dev_err(dev->dev, "Invalid apptrust selector or priority order. Supported: %s\n",
+		supported_apptrust_variants);
+}
+
+/**
+ * ksz_port_set_apptrust_validate - Validates the apptrust selectors
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @sel: Array of apptrust selectors to validate
+ * @nsel: Number of apptrust selectors in the array
+ *
+ * This function validates the apptrust selectors provided and ensures that
+ * they are in the correct order.
+ *
+ * This family of switches supports two apptrust selectors: DCB_APP_SEL_PCP and
+ * IEEE_8021QAZ_APP_SEL_DSCP. The priority order of the selectors is fixed and
+ * cannot be changed. The order is as follows:
+ * 1. DCB_APP_SEL_PCP - Priority Code Point selector (highest priority)
+ * 2. IEEE_8021QAZ_APP_SEL_DSCP - Differentiated Services Code Point selector
+ *   (lowest priority)
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz_port_set_apptrust_validate(struct ksz_device *dev, int port,
+					  const u8 *sel, int nsel)
+{
+	int i, j, found;
+	int j_prev = 0;
+
+	/* Iterate through the requested selectors */
+	for (i = 0; i < nsel; i++) {
+		found = 0;
+
+		/* Check if the current selector is supported by the hardware */
+		for (j = 0; j < sizeof(ksz_supported_apptrust); j++) {
+			if (sel[i] != ksz_supported_apptrust[j])
+				continue;
+
+			found = 1;
+
+			/* Ensure that no higher priority selector (lower index)
+			 * precedes a lower priority one
+			 */
+			if (i > 0 && j <= j_prev)
+				goto err_sel_not_vaild;
+
+			j_prev = j;
+			break;
+		}
+
+		if (!found)
+			goto err_sel_not_vaild;
+	}
+
+	return 0;
+
+err_sel_not_vaild:
+	ksz_apptrust_error(dev);
+
+	return -EINVAL;
+}
+
+/**
+ * ksz88x3_port1_apptrust_quirk - Quirk for apptrust configuration on Port 1
+ *				  of KSZ88x3 devices
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @reg: Register address for the apptrust configuration
+ * @port1_data: Data to set for the apptrust configuration
+ *
+ * This function implements a quirk for apptrust configuration on Port 1 of
+ * KSZ88x3 devices. It ensures that apptrust configuration on Port 1 is not
+ * possible if PCP apptrust on Port 2 is disabled. This is because the Port 2
+ * seems to be permanently hardwired to PCP classification, so we need to
+ * do Port 1 configuration always in agreement with Port 2 configuration.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port1_apptrust_quirk(struct ksz_device *dev, int port,
+					int reg, u8 port1_data)
+{
+	u8 port2_data;
+	int ret;
+
+	/* If no apptrust is requested for Port 1, no need to care about Port 2
+	 * configuration.
+	 */
+	if (!(port1_data & (KSZ8_PORT_802_1P_ENABLE | KSZ8_PORT_DIFFSERV_ENABLE)))
+		return 0;
+
+	/* We got request to enable any apptrust on Port 1. To make it possible,
+	 * we need to enable multiple queues on the switch. If we enable
+	 * multiqueue support, PCP classification on Port 2 will be
+	 * automatically activated by HW.
+	 */
+	ret = ksz_pread8(dev, KSZ_PORT_2, reg, &port2_data);
+	if (ret)
+		return ret;
+
+	/* If KSZ8_PORT_802_1P_ENABLE bit is set on Port 2, the driver showed
+	 * the interest in PCP classification on Port 2. In this case,
+	 * multiqueue support is enabled and we can enable any apptrust on
+	 * Port 1.
+	 * If KSZ8_PORT_802_1P_ENABLE bit is not set on Port 2, the PCP
+	 * classification on Port 2 is still active, but the driver disabled
+	 * multiqueue support and made frame prioritization inactive for
+	 * all ports. In this case, we can't enable any apptrust on Port 1.
+	 */
+	if (!(port2_data & KSZ8_PORT_802_1P_ENABLE)) {
+		dev_err(dev->dev, "Not possible to enable any apptrust on Port 1 if PCP apptrust on Port 2 is disabled\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * ksz88x3_port2_apptrust_quirk - Quirk for apptrust configuration on Port 2
+ *				  of KSZ88x3 devices
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @reg: Register address for the apptrust configuration
+ * @port2_data: Data to set for the apptrust configuration
+ *
+ * This function implements a quirk for apptrust configuration on Port 2 of
+ * KSZ88x3 devices. It ensures that DSCP apptrust is not working on Port 2 and
+ * that it is not possible to disable PCP on Port 2. The only way to disable PCP
+ * on Port 2 is to disable multiple queues on the switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port2_apptrust_quirk(struct ksz_device *dev, int port,
+					int reg, u8 port2_data)
+{
+	struct dsa_switch *ds = dev->ds;
+	u8 port1_data;
+	int ret;
+
+	/* First validate Port 2 configuration. DiffServ/DSCP is not working
+	 * on this port.
+	 */
+	if (port2_data & KSZ8_PORT_DIFFSERV_ENABLE) {
+		dev_err(dev->dev, "DSCP apptrust is not working on Port 2\n");
+		return -EINVAL;
+	}
+
+	/* If PCP support is requested, we need to enable all queues on the
+	 * switch to make PCP priority working on Port 2.
+	 */
+	if (port2_data & KSZ8_PORT_802_1P_ENABLE)
+		return ksz8_all_queues_split(dev, dev->info->num_tx_queues);
+
+	/* We got request to disable PCP priority on Port 2.
+	 * Now, we need to compare Port 2 configuration with Port 1
+	 * configuration.
+	 */
+	ret = ksz_pread8(dev, KSZ_PORT_1, reg, &port1_data);
+	if (ret)
+		return ret;
+
+	/* If Port 1 has any apptrust enabled, we can't disable multiple queues
+	 * on the switch, so we can't disable PCP on Port 2.
+	 */
+	if (port1_data & (KSZ8_PORT_802_1P_ENABLE | KSZ8_PORT_DIFFSERV_ENABLE)) {
+		dev_err(dev->dev, "Not possible to disable PCP on Port 2 if any apptrust is enabled on Port 1\n");
+		return -EINVAL;
+	}
+
+	/* Now we need to ensure that default priority on Port 1 is set to 0
+	 * otherwise we can't disable multiqueue support on the switch.
+	 */
+	ret = ksz_port_get_default_prio(ds, KSZ_PORT_1);
+	if (ret < 0) {
+		return ret;
+	} else if (ret) {
+		dev_err(dev->dev, "Not possible to disable PCP on Port 2 if non zero default priority is set on Port 1\n");
+		return -EINVAL;
+	}
+
+	/* Port 1 has no apptrust or default priority set and we got request to
+	 * disable PCP on Port 2. We can disable multiqueue support to disable
+	 * PCP on Port 2.
+	 */
+	return ksz8_all_queues_split(dev, 1);
+}
+
+/**
+ * ksz88x3_port_apptrust_quirk - Quirk for apptrust configuration on KSZ88x3
+ *			       devices
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @reg: Register address for the apptrust configuration
+ * @data: Data to set for the apptrust configuration
+ *
+ * This function implements a quirk for apptrust configuration on KSZ88x3
+ * devices. It ensures that apptrust configuration on Port 1 and
+ * Port 2 is done in agreement with each other.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port_apptrust_quirk(struct ksz_device *dev, int port,
+				       int reg, u8 data)
+{
+	if (port == KSZ_PORT_1)
+		return ksz88x3_port1_apptrust_quirk(dev, port, reg, data);
+	else if (port == KSZ_PORT_2)
+		return ksz88x3_port2_apptrust_quirk(dev, port, reg, data);
+
+	return 0;
+}
+
+/**
+ * ksz_port_set_apptrust - Sets the apptrust selectors for a port on a KSZ
+ *			   switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to set the apptrust selectors
+ * @sel: Array of apptrust selectors to set
+ * @nsel: Number of apptrust selectors in the array
+ *
+ * This function sets the apptrust selectors for the specified port on a KSZ
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_set_apptrust(struct dsa_switch *ds, int port,
+			  const u8 *sel, int nsel)
+{
+	const struct ksz_apptrust_map *map;
+	struct ksz_device *dev = ds->priv;
+	int reg, i, ret;
+	u8 data = 0;
+	u8 mask;
+
+	ret = ksz_port_set_apptrust_validate(dev, port, sel, nsel);
+	if (ret)
+		return ret;
+
+	ksz_get_apptrust_map_and_reg(dev, &map, &reg, &mask);
+
+	for (i = 0; i < nsel; i++) {
+		int j;
+
+		for (j = 0; j < ARRAY_SIZE(ksz_supported_apptrust); j++) {
+			if (sel[i] != ksz_supported_apptrust[j])
+				continue;
+
+			data |= map[j].bit;
+			break;
+		}
+	}
+
+	if (ksz_is_ksz88x3(dev)) {
+		ret = ksz88x3_port_apptrust_quirk(dev, port, reg, data);
+		if (ret)
+			return ret;
+	}
+
+	return ksz_prmw8(dev, port, reg, mask, data);
+}
+
+/**
+ * ksz_port_get_apptrust - Retrieves the apptrust selectors for a port on a KSZ
+ *			   switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to get the apptrust selectors
+ * @sel: Array to store the apptrust selectors
+ * @nsel: Number of apptrust selectors in the array
+ *
+ * This function fetches the apptrust selectors for the specified port on a KSZ
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_get_apptrust(struct dsa_switch *ds, int port, u8 *sel, int *nsel)
+{
+	const struct ksz_apptrust_map *map;
+	struct ksz_device *dev = ds->priv;
+	int reg, i, ret;
+	u8 data;
+	u8 mask;
+
+	ksz_get_apptrust_map_and_reg(dev, &map, &reg, &mask);
+
+	ret = ksz_pread8(dev, port, reg, &data);
+	if (ret)
+		return ret;
+
+	*nsel = 0;
+	for (i = 0; i < ARRAY_SIZE(ksz_supported_apptrust); i++) {
+		if (data & map[i].bit)
+			sel[(*nsel)++] = ksz_supported_apptrust[i];
+	}
+
+	return 0;
+}
+
+/**
+ * ksz_dcb_init_port - Initializes the DCB configuration for a port on a KSZ
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to initialize the DCB configuration
+ *
+ * This function initializes the DCB configuration for the specified port on a
+ * KSZ switch. Particular DCB configuration is set for the port, including the
+ * default priority and apptrust selectors.
+ * The default priority is set to Best Effort, and the apptrust selectors are
+ * set to all supported selectors.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_dcb_init_port(struct ksz_device *dev, int port)
+{
+	const u8 ksz_default_apptrust[] = { DCB_APP_SEL_PCP };
+	int ret, ipm;
+
+	if (is_ksz8(dev)) {
+		ipm = ieee8021q_tt_to_tc(IEEE8021Q_TT_BE,
+					 dev->info->num_tx_queues);
+		if (ipm < 0)
+			return ipm;
+	} else {
+		ipm = IEEE8021Q_TT_BE;
+	}
+
+	/* Set the default priority for the port to Best Effort */
+	ret = ksz_port_set_default_prio(dev->ds, port, ipm);
+	if (ret)
+		return ret;
+
+	return ksz_port_set_apptrust(dev->ds, port, ksz_default_apptrust,
+				     ARRAY_SIZE(ksz_default_apptrust));
+}
+
+/**
+ * ksz_dcb_init - Initializes the DCB configuration for a KSZ switch
+ * @dev: Pointer to the KSZ switch device structure
+ *
+ * This function initializes the DCB configuration for a KSZ switch. The global
+ * DSCP-to-priority mapping table is initialized.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_dcb_init(struct ksz_device *dev)
+{
+	int ret;
+
+	ret = ksz_init_global_dscp_map(dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/drivers/net/dsa/microchip/ksz_dcb.h b/drivers/net/dsa/microchip/ksz_dcb.h
new file mode 100644
index 000000000000..e2065223ba90
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_dcb.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> */
+
+#ifndef __KSZ_DCB_H
+#define __KSZ_DCB_H
+
+#include <net/dsa.h>
+
+#include "ksz_common.h"
+
+int ksz_port_get_default_prio(struct dsa_switch *ds, int port);
+int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio);
+int ksz_port_get_dscp_prio(struct dsa_switch *ds, int port, u8 dscp);
+int ksz_port_add_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio);
+int ksz_port_del_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio);
+int ksz_port_set_apptrust(struct dsa_switch *ds, int port,
+			  const unsigned char *sel,
+			  int nsel);
+int ksz_port_get_apptrust(struct dsa_switch *ds, int port, u8 *sel, int *nsel);
+int ksz_dcb_init_port(struct ksz_device *dev, int port);
+int ksz_dcb_init(struct ksz_device *dev);
+
+#endif /* __KSZ_DCB_H */
diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c
index c8166fb440ab..8e8d83213b04 100644
--- a/drivers/net/dsa/microchip/ksz_spi.c
+++ b/drivers/net/dsa/microchip/ksz_spi.c
@@ -222,7 +222,6 @@ MODULE_DEVICE_TABLE(spi, ksz_spi_ids);
 static struct spi_driver ksz_spi_driver = {
 	.driver = {
 		.name	= "ksz-switch",
-		.owner	= THIS_MODULE,
 		.of_match_table = ksz_dt_ids,
 	},
 	.id_table = ksz_spi_ids,
@@ -233,13 +232,6 @@ static struct spi_driver ksz_spi_driver = {
 
 module_spi_driver(ksz_spi_driver);
 
-MODULE_ALIAS("spi:ksz9477");
-MODULE_ALIAS("spi:ksz9896");
-MODULE_ALIAS("spi:ksz9897");
-MODULE_ALIAS("spi:ksz9893");
-MODULE_ALIAS("spi:ksz9563");
-MODULE_ALIAS("spi:ksz8563");
-MODULE_ALIAS("spi:ksz9567");
 MODULE_ALIAS("spi:lan937x");
 MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
 MODULE_DESCRIPTION("Microchip ksz Series Switch SPI Driver");
diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
index fa3ee85a99c1..51df42ccdbe6 100644
--- a/drivers/net/dsa/mt7530-mdio.c
+++ b/drivers/net/dsa/mt7530-mdio.c
@@ -18,7 +18,8 @@
 static int
 mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
 {
-	struct mii_bus *bus = context;
+	struct mt7530_priv *priv = context;
+	struct mii_bus *bus = priv->bus;
 	u16 page, r, lo, hi;
 	int ret;
 
@@ -27,36 +28,35 @@ mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
 	lo = val & 0xffff;
 	hi = val >> 16;
 
-	/* MT7530 uses 31 as the pseudo port */
-	ret = bus->write(bus, 0x1f, 0x1f, page);
+	ret = bus->write(bus, priv->mdiodev->addr, 0x1f, page);
 	if (ret < 0)
 		return ret;
 
-	ret = bus->write(bus, 0x1f, r,  lo);
+	ret = bus->write(bus, priv->mdiodev->addr, r, lo);
 	if (ret < 0)
 		return ret;
 
-	ret = bus->write(bus, 0x1f, 0x10, hi);
+	ret = bus->write(bus, priv->mdiodev->addr, 0x10, hi);
 	return ret;
 }
 
 static int
 mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
 {
-	struct mii_bus *bus = context;
+	struct mt7530_priv *priv = context;
+	struct mii_bus *bus = priv->bus;
 	u16 page, r, lo, hi;
 	int ret;
 
 	page = (reg >> 6) & 0x3ff;
 	r = (reg >> 2) & 0xf;
 
-	/* MT7530 uses 31 as the pseudo port */
-	ret = bus->write(bus, 0x1f, 0x1f, page);
+	ret = bus->write(bus, priv->mdiodev->addr, 0x1f, page);
 	if (ret < 0)
 		return ret;
 
-	lo = bus->read(bus, 0x1f, r);
-	hi = bus->read(bus, 0x1f, 0x10);
+	lo = bus->read(bus, priv->mdiodev->addr, r);
+	hi = bus->read(bus, priv->mdiodev->addr, 0x10);
 
 	*val = (hi << 16) | (lo & 0xffff);
 
@@ -107,8 +107,7 @@ mt7531_create_sgmii(struct mt7530_priv *priv)
 		mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
 		mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
 
-		regmap = devm_regmap_init(priv->dev,
-					  &mt7530_regmap_bus, priv->bus,
+		regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv,
 					  mt7531_pcs_config[i]);
 		if (IS_ERR(regmap)) {
 			ret = PTR_ERR(regmap);
@@ -153,6 +152,7 @@ mt7530_probe(struct mdio_device *mdiodev)
 
 	priv->bus = mdiodev->bus;
 	priv->dev = &mdiodev->dev;
+	priv->mdiodev = mdiodev;
 
 	ret = mt7530_probe_common(priv);
 	if (ret)
@@ -203,8 +203,8 @@ mt7530_probe(struct mdio_device *mdiodev)
 	regmap_config->reg_stride = 4;
 	regmap_config->max_register = MT7530_CREV;
 	regmap_config->disable_locking = true;
-	priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
-					priv->bus, regmap_config);
+	priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv,
+					regmap_config);
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
 
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8090390edaf9..598434d8d6e4 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -74,108 +74,94 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
 	MIB_DESC(1, 0xb8, "RxArlDrop"),
 };
 
-/* Since phy_device has not yet been created and
- * phy_{read,write}_mmd_indirect is not available, we provide our own
- * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers
- * to complete this function.
- */
-static int
-core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
+static void
+mt7530_mutex_lock(struct mt7530_priv *priv)
+{
+	if (priv->bus)
+		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+}
+
+static void
+mt7530_mutex_unlock(struct mt7530_priv *priv)
+{
+	if (priv->bus)
+		mutex_unlock(&priv->bus->mdio_lock);
+}
+
+static void
+core_write(struct mt7530_priv *priv, u32 reg, u32 val)
 {
 	struct mii_bus *bus = priv->bus;
-	int value, ret;
+	int ret;
+
+	mt7530_mutex_lock(priv);
 
 	/* Write the desired MMD Devad */
-	ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
+			 MII_MMD_CTRL, MDIO_MMD_VEND2);
 	if (ret < 0)
 		goto err;
 
 	/* Write the desired MMD register address */
-	ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
+			 MII_MMD_DATA, reg);
 	if (ret < 0)
 		goto err;
 
 	/* Select the Function : DATA with no post increment */
-	ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
+			 MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
 	if (ret < 0)
 		goto err;
 
-	/* Read the content of the MMD's selected register */
-	value = bus->read(bus, 0, MII_MMD_DATA);
-
-	return value;
+	/* Write the data into MMD's selected register */
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
+			 MII_MMD_DATA, val);
 err:
-	dev_err(&bus->dev,  "failed to read mmd register\n");
+	if (ret < 0)
+		dev_err(&bus->dev, "failed to write mmd register\n");
 
-	return ret;
+	mt7530_mutex_unlock(priv);
 }
 
-static int
-core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
-			int devad, u32 data)
+static void
+core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
 {
 	struct mii_bus *bus = priv->bus;
+	u32 val;
 	int ret;
 
+	mt7530_mutex_lock(priv);
+
 	/* Write the desired MMD Devad */
-	ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
+			 MII_MMD_CTRL, MDIO_MMD_VEND2);
 	if (ret < 0)
 		goto err;
 
 	/* Write the desired MMD register address */
-	ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
+			 MII_MMD_DATA, reg);
 	if (ret < 0)
 		goto err;
 
 	/* Select the Function : DATA with no post increment */
-	ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
+			 MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
 	if (ret < 0)
 		goto err;
 
+	/* Read the content of the MMD's selected register */
+	val = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
+			MII_MMD_DATA);
+	val &= ~mask;
+	val |= set;
 	/* Write the data into MMD's selected register */
-	ret = bus->write(bus, 0, MII_MMD_DATA, data);
+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
+			 MII_MMD_DATA, val);
 err:
 	if (ret < 0)
-		dev_err(&bus->dev,
-			"failed to write mmd register\n");
-	return ret;
-}
-
-static void
-mt7530_mutex_lock(struct mt7530_priv *priv)
-{
-	if (priv->bus)
-		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-}
-
-static void
-mt7530_mutex_unlock(struct mt7530_priv *priv)
-{
-	if (priv->bus)
-		mutex_unlock(&priv->bus->mdio_lock);
-}
-
-static void
-core_write(struct mt7530_priv *priv, u32 reg, u32 val)
-{
-	mt7530_mutex_lock(priv);
-
-	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
-
-	mt7530_mutex_unlock(priv);
-}
-
-static void
-core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
-{
-	u32 val;
-
-	mt7530_mutex_lock(priv);
-
-	val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
-	val &= ~mask;
-	val |= set;
-	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+		dev_err(&bus->dev, "failed to write mmd register\n");
 
 	mt7530_mutex_unlock(priv);
 }
@@ -431,23 +417,23 @@ mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
 
 	mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1));
 
-	xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
+	xtal = mt7530_read(priv, MT753X_MTRAP) & MT7530_XTAL_MASK;
 
-	if (xtal == HWTRAP_XTAL_25MHZ)
+	if (xtal == MT7530_XTAL_25MHZ)
 		ssc_delta = 0x57;
 	else
 		ssc_delta = 0x87;
 
 	if (priv->id == ID_MT7621) {
 		/* PLL frequency: 125MHz: 1.0GBit */
-		if (xtal == HWTRAP_XTAL_40MHZ)
+		if (xtal == MT7530_XTAL_40MHZ)
 			ncpo1 = 0x0640;
-		if (xtal == HWTRAP_XTAL_25MHZ)
+		if (xtal == MT7530_XTAL_25MHZ)
 			ncpo1 = 0x0a00;
 	} else { /* PLL frequency: 250MHz: 2.0Gbit */
-		if (xtal == HWTRAP_XTAL_40MHZ)
+		if (xtal == MT7530_XTAL_40MHZ)
 			ncpo1 = 0x0c80;
-		if (xtal == HWTRAP_XTAL_25MHZ)
+		if (xtal == MT7530_XTAL_25MHZ)
 			ncpo1 = 0x1400;
 	}
 
@@ -470,19 +456,20 @@ mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
 static void
 mt7531_pll_setup(struct mt7530_priv *priv)
 {
+	enum mt7531_xtal_fsel xtal;
 	u32 top_sig;
 	u32 hwstrap;
-	u32 xtal;
 	u32 val;
 
 	val = mt7530_read(priv, MT7531_CREV);
 	top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
-	hwstrap = mt7530_read(priv, MT7531_HWTRAP);
+	hwstrap = mt7530_read(priv, MT753X_TRAP);
 	if ((val & CHIP_REV_M) > 0)
-		xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ :
-						    HWTRAP_XTAL_FSEL_25MHZ;
+		xtal = (top_sig & PAD_MCM_SMI_EN) ? MT7531_XTAL_FSEL_40MHZ :
+						    MT7531_XTAL_FSEL_25MHZ;
 	else
-		xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK;
+		xtal = (hwstrap & MT7531_XTAL25) ? MT7531_XTAL_FSEL_25MHZ :
+						   MT7531_XTAL_FSEL_40MHZ;
 
 	/* Step 1 : Disable MT7531 COREPLL */
 	val = mt7530_read(priv, MT7531_PLLGP_EN);
@@ -511,13 +498,13 @@ mt7531_pll_setup(struct mt7530_priv *priv)
 	usleep_range(25, 35);
 
 	switch (xtal) {
-	case HWTRAP_XTAL_FSEL_25MHZ:
+	case MT7531_XTAL_FSEL_25MHZ:
 		val = mt7530_read(priv, MT7531_PLLGP_CR0);
 		val &= ~RG_COREPLL_SDM_PCW_M;
 		val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
 		mt7530_write(priv, MT7531_PLLGP_CR0, val);
 		break;
-	case HWTRAP_XTAL_FSEL_40MHZ:
+	case MT7531_XTAL_FSEL_40MHZ:
 		val = mt7530_read(priv, MT7531_PLLGP_CR0);
 		val &= ~RG_COREPLL_SDM_PCW_M;
 		val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
@@ -871,19 +858,15 @@ mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
 	return 0;
 }
 
-static const char *p5_intf_modes(unsigned int p5_interface)
+static const char *mt7530_p5_mode_str(unsigned int mode)
 {
-	switch (p5_interface) {
-	case P5_DISABLED:
-		return "DISABLED";
-	case P5_INTF_SEL_PHY_P0:
-		return "PHY P0";
-	case P5_INTF_SEL_PHY_P4:
-		return "PHY P4";
-	case P5_INTF_SEL_GMAC5:
-		return "GMAC5";
+	switch (mode) {
+	case MUX_PHY_P0:
+		return "MUX PHY P0";
+	case MUX_PHY_P4:
+		return "MUX PHY P4";
 	default:
-		return "unknown";
+		return "GMAC5";
 	}
 }
 
@@ -895,34 +878,31 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 
 	mutex_lock(&priv->reg_mutex);
 
-	val = mt7530_read(priv, MT7530_MHWTRAP);
+	val = mt7530_read(priv, MT753X_MTRAP);
 
-	val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
-	val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
+	val &= ~MT7530_P5_PHY0_SEL & ~MT7530_P5_MAC_SEL & ~MT7530_P5_RGMII_MODE;
 
-	switch (priv->p5_intf_sel) {
-	case P5_INTF_SEL_PHY_P0:
-		/* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
-		val |= MHWTRAP_PHY0_SEL;
+	switch (priv->p5_mode) {
+	/* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
+	case MUX_PHY_P0:
+		val |= MT7530_P5_PHY0_SEL;
 		fallthrough;
-	case P5_INTF_SEL_PHY_P4:
-		/* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
-		val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
 
+	/* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
+	case MUX_PHY_P4:
 		/* Setup the MAC by default for the cpu port */
-		mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
-		break;
-	case P5_INTF_SEL_GMAC5:
-		/* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
-		val &= ~MHWTRAP_P5_DIS;
+		mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
 		break;
+
+	/* GMAC5: P5 -> SoC MAC or external PHY */
 	default:
+		val |= MT7530_P5_MAC_SEL;
 		break;
 	}
 
 	/* Setup RGMII settings */
 	if (phy_interface_mode_is_rgmii(interface)) {
-		val |= MHWTRAP_P5_RGMII_MODE;
+		val |= MT7530_P5_RGMII_MODE;
 
 		/* P5 RGMII RX Clock Control: delay setting for 1000M */
 		mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
@@ -942,10 +922,10 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 			     P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
 	}
 
-	mt7530_write(priv, MT7530_MHWTRAP, val);
+	mt7530_write(priv, MT753X_MTRAP, val);
 
-	dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
-		val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
+	dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
+		mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
 
 	mutex_unlock(&priv->reg_mutex);
 }
@@ -1125,42 +1105,34 @@ mt753x_trap_frames(struct mt7530_priv *priv)
 	 * VLAN-untagged.
 	 */
 	mt7530_rmw(priv, MT753X_BPC,
-		   MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
-			   MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
-			   MT753X_BPDU_PORT_FW_MASK,
-		   MT753X_PAE_BPDU_FR |
-			   MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-			   MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-			   MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-			   MT753X_BPDU_CPU_ONLY);
+		   PAE_BPDU_FR | PAE_EG_TAG_MASK | PAE_PORT_FW_MASK |
+			   BPDU_EG_TAG_MASK | BPDU_PORT_FW_MASK,
+		   PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   PAE_PORT_FW(TO_CPU_FW_CPU_ONLY) |
+			   BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   TO_CPU_FW_CPU_ONLY);
 
 	/* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
 	 * them VLAN-untagged.
 	 */
 	mt7530_rmw(priv, MT753X_RGAC1,
-		   MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
-			   MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
-			   MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
-		   MT753X_R02_BPDU_FR |
-			   MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-			   MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-			   MT753X_R01_BPDU_FR |
-			   MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-			   MT753X_BPDU_CPU_ONLY);
+		   R02_BPDU_FR | R02_EG_TAG_MASK | R02_PORT_FW_MASK |
+			   R01_BPDU_FR | R01_EG_TAG_MASK | R01_PORT_FW_MASK,
+		   R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   R02_PORT_FW(TO_CPU_FW_CPU_ONLY) | R01_BPDU_FR |
+			   R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   TO_CPU_FW_CPU_ONLY);
 
 	/* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
 	 * them VLAN-untagged.
 	 */
 	mt7530_rmw(priv, MT753X_RGAC2,
-		   MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
-			   MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
-			   MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
-		   MT753X_R0E_BPDU_FR |
-			   MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-			   MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
-			   MT753X_R03_BPDU_FR |
-			   MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-			   MT753X_BPDU_CPU_ONLY);
+		   R0E_BPDU_FR | R0E_EG_TAG_MASK | R0E_PORT_FW_MASK |
+			   R03_BPDU_FR | R03_EG_TAG_MASK | R03_PORT_FW_MASK,
+		   R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   R0E_PORT_FW(TO_CPU_FW_CPU_ONLY) | R03_BPDU_FR |
+			   R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+			   TO_CPU_FW_CPU_ONLY);
 }
 
 static void
@@ -1173,7 +1145,7 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
 		     PORT_SPEC_TAG);
 
 	/* Enable flooding on the CPU port */
-	mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
+	mt7530_set(priv, MT753X_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
 		   UNU_FFP(BIT(port)));
 
 	/* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
@@ -1218,6 +1190,14 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
 
 	mutex_unlock(&priv->reg_mutex);
 
+	if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
+		return 0;
+
+	if (port == 5)
+		mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
+	else if (port == 6)
+		mt7530_clear(priv, MT753X_MTRAP, MT7530_P6_DIS);
+
 	return 0;
 }
 
@@ -1236,6 +1216,15 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
 		   PCR_MATRIX_CLR);
 
 	mutex_unlock(&priv->reg_mutex);
+
+	if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
+		return;
+
+	/* Do not set MT7530_P5_DIS when port 5 is being used for PHY muxing. */
+	if (port == 5 && priv->p5_mode == GMAC5)
+		mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
+	else if (port == 6)
+		mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
 }
 
 static int
@@ -1337,15 +1326,15 @@ mt7530_port_bridge_flags(struct dsa_switch *ds, int port,
 			   flags.val & BR_LEARNING ? 0 : SA_DIS);
 
 	if (flags.mask & BR_FLOOD)
-		mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)),
+		mt7530_rmw(priv, MT753X_MFC, UNU_FFP(BIT(port)),
 			   flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0);
 
 	if (flags.mask & BR_MCAST_FLOOD)
-		mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)),
+		mt7530_rmw(priv, MT753X_MFC, UNM_FFP(BIT(port)),
 			   flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0);
 
 	if (flags.mask & BR_BCAST_FLOOD)
-		mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)),
+		mt7530_rmw(priv, MT753X_MFC, BC_FFP(BIT(port)),
 			   flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0);
 
 	return 0;
@@ -1423,7 +1412,7 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
 	mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
 		   G0_PORT_VID_DEF);
 
-	for (i = 0; i < MT7530_NUM_PORTS; i++) {
+	for (i = 0; i < priv->ds->num_ports; i++) {
 		if (dsa_is_user_port(ds, i) &&
 		    dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
 			all_user_ports_removed = false;
@@ -1881,20 +1870,6 @@ mt7530_port_vlan_del(struct dsa_switch *ds, int port,
 	return 0;
 }
 
-static int mt753x_mirror_port_get(unsigned int id, u32 val)
-{
-	return (id == ID_MT7531 || id == ID_MT7988) ?
-		       MT7531_MIRROR_PORT_GET(val) :
-		       MIRROR_PORT(val);
-}
-
-static int mt753x_mirror_port_set(unsigned int id, u32 val)
-{
-	return (id == ID_MT7531 || id == ID_MT7988) ?
-		       MT7531_MIRROR_PORT_SET(val) :
-		       MIRROR_PORT(val);
-}
-
 static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
 				  struct dsa_mall_mirror_tc_entry *mirror,
 				  bool ingress, struct netlink_ext_ack *extack)
@@ -1910,14 +1885,14 @@ static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
 	val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
 
 	/* MT7530 only supports one monitor port */
-	monitor_port = mt753x_mirror_port_get(priv->id, val);
+	monitor_port = MT753X_MIRROR_PORT_GET(priv->id, val);
 	if (val & MT753X_MIRROR_EN(priv->id) &&
 	    monitor_port != mirror->to_local_port)
 		return -EEXIST;
 
 	val |= MT753X_MIRROR_EN(priv->id);
-	val &= ~MT753X_MIRROR_MASK(priv->id);
-	val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port);
+	val &= ~MT753X_MIRROR_PORT_MASK(priv->id);
+	val |= MT753X_MIRROR_PORT_SET(priv->id, mirror->to_local_port);
 	mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
 
 	val = mt7530_read(priv, MT7530_PCR_P(port));
@@ -2405,7 +2380,7 @@ mt7530_setup(struct dsa_switch *ds)
 	}
 
 	/* Waiting for MT7530 got to stable */
-	INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
+	INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
 	ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
 				 20, 1000000);
 	if (ret < 0) {
@@ -2420,7 +2395,7 @@ mt7530_setup(struct dsa_switch *ds)
 		return -ENODEV;
 	}
 
-	if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) {
+	if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_20MHZ) {
 		dev_err(priv->dev,
 			"MT7530 with a 20MHz XTAL is not supported!\n");
 		return -EINVAL;
@@ -2440,13 +2415,13 @@ mt7530_setup(struct dsa_switch *ds)
 		mt7530_rmw(priv, MT7530_TRGMII_RD(i),
 			   RD_TAP_MASK, RD_TAP(16));
 
-	/* Enable port 6 */
-	val = mt7530_read(priv, MT7530_MHWTRAP);
-	val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
-	val |= MHWTRAP_MANUAL;
-	mt7530_write(priv, MT7530_MHWTRAP, val);
+	/* Allow modifying the trap and directly access PHY registers via the
+	 * MDIO bus the switch is on.
+	 */
+	mt7530_rmw(priv, MT753X_MTRAP, MT7530_CHG_TRAP |
+		   MT7530_PHY_INDIRECT_ACCESS, MT7530_CHG_TRAP);
 
-	if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
+	if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
 		mt7530_pll_setup(priv);
 
 	mt753x_trap_frames(priv);
@@ -2454,12 +2429,12 @@ mt7530_setup(struct dsa_switch *ds)
 	/* Enable and reset MIB counters */
 	mt7530_mib_reset(ds);
 
-	for (i = 0; i < MT7530_NUM_PORTS; i++) {
+	for (i = 0; i < priv->ds->num_ports; i++) {
 		/* Clear link settings and enable force mode to force link down
 		 * on all ports until they're enabled later.
 		 */
-		mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-			   PMCR_FORCE_MODE, PMCR_FORCE_MODE);
+		mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
+			   MT7530_FORCE_MODE, MT7530_FORCE_MODE);
 
 		/* Disable forwarding by default on all ports */
 		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
@@ -2490,13 +2465,11 @@ mt7530_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
-	/* Setup port 5 */
-	if (!dsa_is_unused_port(ds, 5)) {
-		priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
-	} else {
+	/* Check for PHY muxing on port 5 */
+	if (dsa_is_unused_port(ds, 5)) {
 		/* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY.
-		 * Set priv->p5_intf_sel to the appropriate value if PHY muxing
-		 * is detected.
+		 * Set priv->p5_mode to the appropriate value if PHY muxing is
+		 * detected.
 		 */
 		for_each_child_of_node(dn, mac_np) {
 			if (!of_device_is_compatible(mac_np,
@@ -2511,7 +2484,8 @@ mt7530_setup(struct dsa_switch *ds)
 			if (!phy_node)
 				continue;
 
-			if (phy_node->parent == priv->dev->of_node->parent) {
+			if (phy_node->parent == priv->dev->of_node->parent ||
+			    phy_node->parent->parent == priv->dev->of_node) {
 				ret = of_get_phy_mode(mac_np, &interface);
 				if (ret && ret != -ENODEV) {
 					of_node_put(mac_np);
@@ -2520,18 +2494,20 @@ mt7530_setup(struct dsa_switch *ds)
 				}
 				id = of_mdio_parse_addr(ds->dev, phy_node);
 				if (id == 0)
-					priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
+					priv->p5_mode = MUX_PHY_P0;
 				if (id == 4)
-					priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
+					priv->p5_mode = MUX_PHY_P4;
 			}
 			of_node_put(mac_np);
 			of_node_put(phy_node);
 			break;
 		}
 
-		if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 ||
-		    priv->p5_intf_sel == P5_INTF_SEL_PHY_P4)
+		if (priv->p5_mode == MUX_PHY_P0 ||
+		    priv->p5_mode == MUX_PHY_P4) {
+			mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
 			mt7530_setup_port5(ds, interface);
+		}
 	}
 
 #ifdef CONFIG_GPIOLIB
@@ -2562,15 +2538,15 @@ mt7531_setup_common(struct dsa_switch *ds)
 	mt7530_mib_reset(ds);
 
 	/* Disable flooding on all ports */
-	mt7530_clear(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK |
+	mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
 		     UNU_FFP_MASK);
 
-	for (i = 0; i < MT7530_NUM_PORTS; i++) {
+	for (i = 0; i < priv->ds->num_ports; i++) {
 		/* Clear link settings and enable force mode to force link down
 		 * on all ports until they're enabled later.
 		 */
-		mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-			   MT7531_FORCE_MODE, MT7531_FORCE_MODE);
+		mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
+			   MT7531_FORCE_MODE_MASK, MT7531_FORCE_MODE_MASK);
 
 		/* Disable forwarding by default on all ports */
 		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
@@ -2629,7 +2605,7 @@ mt7531_setup(struct dsa_switch *ds)
 	}
 
 	/* Waiting for MT7530 got to stable */
-	INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
+	INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
 	ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
 				 20, 1000000);
 	if (ret < 0) {
@@ -2652,8 +2628,8 @@ mt7531_setup(struct dsa_switch *ds)
 	priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
 
 	/* Force link down on all ports before internal reset */
-	for (i = 0; i < MT7530_NUM_PORTS; i++)
-		mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
+	for (i = 0; i < priv->ds->num_ports; i++)
+		mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
 
 	/* Reset the switch through internal reset */
 	mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
@@ -2661,16 +2637,16 @@ mt7531_setup(struct dsa_switch *ds)
 	if (!priv->p5_sgmii) {
 		mt7531_pll_setup(priv);
 	} else {
-		/* Let ds->user_mii_bus be able to access external phy. */
+		/* Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on
+		 * MT7531AE. Set the GPIO 11-12 pins to function as MDC and MDIO
+		 * to expose the MDIO bus of the switch.
+		 */
 		mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
 			   MT7531_EXT_P_MDC_11);
 		mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
 			   MT7531_EXT_P_MDIO_12);
 	}
 
-	if (!dsa_is_unused_port(ds, 5))
-		priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
-
 	mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
 		   MT7531_GPIO0_INTERRUPT);
 
@@ -2679,21 +2655,26 @@ mt7531_setup(struct dsa_switch *ds)
 	 * phy_[read,write]_mmd_indirect is called, we provide our own
 	 * mt7531_ind_mmd_phy_[read,write] to complete this function.
 	 */
-	val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
+	val = mt7531_ind_c45_phy_read(priv,
+				      MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
 				      MDIO_MMD_VEND2, CORE_PLL_GROUP4);
 	val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
 	val &= ~MT7531_PHY_PLL_OFF;
-	mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
-				 CORE_PLL_GROUP4, val);
+	mt7531_ind_c45_phy_write(priv,
+				 MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
+				 MDIO_MMD_VEND2, CORE_PLL_GROUP4, val);
 
 	/* Disable EEE advertisement on the switch PHYs. */
-	for (i = MT753X_CTRL_PHY_ADDR;
-	     i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
+	for (i = MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr);
+	     i < MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr) + MT7530_NUM_PHYS;
+	     i++) {
 		mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
 					 0);
 	}
 
-	mt7531_setup_common(ds);
+	ret = mt7531_setup_common(ds);
+	if (ret)
+		return ret;
 
 	/* Setup VLAN ID 0 for VLAN-unaware bridges */
 	ret = mt7530_setup_vlan0(priv);
@@ -2709,6 +2690,8 @@ mt7531_setup(struct dsa_switch *ds)
 static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
 				     struct phylink_config *config)
 {
+	config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+
 	switch (port) {
 	/* Ports which are connected to switch PHYs. There is no MII pinout. */
 	case 0 ... 4:
@@ -2740,6 +2723,8 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
 {
 	struct mt7530_priv *priv = ds->priv;
 
+	config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+
 	switch (port) {
 	/* Ports which are connected to switch PHYs. There is no MII pinout. */
 	case 0 ... 4:
@@ -2779,14 +2764,17 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
 	case 0 ... 3:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
+
+		config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
 		break;
 
 	/* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */
 	case 6:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
-		config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-					   MAC_10000FD;
+
+		config->mac_capabilities |= MAC_10000FD;
+		break;
 	}
 }
 
@@ -2802,7 +2790,7 @@ mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 		mt7530_setup_port6(priv->ds, interface);
 }
 
-static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
+static void mt7531_rgmii_setup(struct mt7530_priv *priv,
 			       phy_interface_t interface,
 			       struct phy_device *phydev)
 {
@@ -2853,62 +2841,70 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 	if (phy_interface_mode_is_rgmii(interface)) {
 		dp = dsa_to_port(ds, port);
 		phydev = dp->user->phydev;
-		mt7531_rgmii_setup(priv, port, interface, phydev);
+		mt7531_rgmii_setup(priv, interface, phydev);
 	}
 }
 
 static struct phylink_pcs *
-mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
+mt753x_phylink_mac_select_pcs(struct phylink_config *config,
 			      phy_interface_t interface)
 {
-	struct mt7530_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mt7530_priv *priv = dp->ds->priv;
 
 	switch (interface) {
 	case PHY_INTERFACE_MODE_TRGMII:
-		return &priv->pcs[port].pcs;
+		return &priv->pcs[dp->index].pcs;
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_2500BASEX:
-		return priv->ports[port].sgmii_pcs;
+		return priv->ports[dp->index].sgmii_pcs;
 	default:
 		return NULL;
 	}
 }
 
 static void
-mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
+mt753x_phylink_mac_config(struct phylink_config *config, unsigned int mode,
 			  const struct phylink_link_state *state)
 {
-	struct mt7530_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct dsa_switch *ds = dp->ds;
+	struct mt7530_priv *priv;
+	int port = dp->index;
+
+	priv = ds->priv;
 
 	if ((port == 5 || port == 6) && priv->info->mac_port_config)
 		priv->info->mac_port_config(ds, port, mode, state->interface);
 
 	/* Are we connected to external phy */
 	if (port == 5 && dsa_is_user_port(ds, 5))
-		mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
+		mt7530_set(priv, MT753X_PMCR_P(port), PMCR_EXT_PHY);
 }
 
-static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
+static void mt753x_phylink_mac_link_down(struct phylink_config *config,
 					 unsigned int mode,
 					 phy_interface_t interface)
 {
-	struct mt7530_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mt7530_priv *priv = dp->ds->priv;
 
-	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
+	mt7530_clear(priv, MT753X_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
 }
 
-static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void mt753x_phylink_mac_link_up(struct phylink_config *config,
+				       struct phy_device *phydev,
 				       unsigned int mode,
 				       phy_interface_t interface,
-				       struct phy_device *phydev,
 				       int speed, int duplex,
 				       bool tx_pause, bool rx_pause)
 {
-	struct mt7530_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mt7530_priv *priv = dp->ds->priv;
 	u32 mcr;
 
-	mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
+	mcr = PMCR_MAC_RX_EN | PMCR_MAC_TX_EN | PMCR_FORCE_LNK;
 
 	switch (speed) {
 	case SPEED_1000:
@@ -2923,9 +2919,9 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	if (duplex == DUPLEX_FULL) {
 		mcr |= PMCR_FORCE_FDX;
 		if (tx_pause)
-			mcr |= PMCR_TX_FC_EN;
+			mcr |= PMCR_FORCE_TX_FC_EN;
 		if (rx_pause)
-			mcr |= PMCR_RX_FC_EN;
+			mcr |= PMCR_FORCE_RX_FC_EN;
 	}
 
 	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
@@ -2940,7 +2936,7 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
 		}
 	}
 
-	mt7530_set(priv, MT7530_PMCR_P(port), mcr);
+	mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr);
 }
 
 static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
@@ -2948,9 +2944,7 @@ static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	/* This switch only supports full-duplex at 1Gbps */
-	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-				   MAC_10 | MAC_100 | MAC_1000FD;
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
 
 	priv->info->mac_port_get_caps(ds, port, config);
 }
@@ -3038,6 +3032,8 @@ mt753x_setup(struct dsa_switch *ds)
 	ret = mt7530_setup_mdio(priv);
 	if (ret && priv->irq)
 		mt7530_free_irq_common(priv);
+	if (ret)
+		return ret;
 
 	/* Initialise the PCS devices */
 	for (i = 0; i < priv->ds->num_ports; i++) {
@@ -3060,10 +3056,10 @@ static int mt753x_get_mac_eee(struct dsa_switch *ds, int port,
 			      struct ethtool_keee *e)
 {
 	struct mt7530_priv *priv = ds->priv;
-	u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
+	u32 eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
 
 	e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
-	e->tx_lpi_timer = GET_LPI_THRESH(eeecr);
+	e->tx_lpi_timer = LPI_THRESH_GET(eeecr);
 
 	return 0;
 }
@@ -3077,11 +3073,11 @@ static int mt753x_set_mac_eee(struct dsa_switch *ds, int port,
 	if (e->tx_lpi_timer > 0xFFF)
 		return -EINVAL;
 
-	set = SET_LPI_THRESH(e->tx_lpi_timer);
+	set = LPI_THRESH_SET(e->tx_lpi_timer);
 	if (!e->tx_lpi_enabled)
 		/* Force LPI Mode without a delay */
 		set |= LPI_MODE_EN;
-	mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set);
+	mt7530_rmw(priv, MT753X_PMEEECR_P(port), mask, set);
 
 	return 0;
 }
@@ -3110,10 +3106,12 @@ mt753x_conduit_state_change(struct dsa_switch *ds,
 	else
 		priv->active_cpu_ports &= ~mask;
 
-	if (priv->active_cpu_ports)
-		val = CPU_EN | CPU_PORT(__ffs(priv->active_cpu_ports));
+	if (priv->active_cpu_ports) {
+		val = MT7530_CPU_EN |
+		      MT7530_CPU_PORT(__ffs(priv->active_cpu_ports));
+	}
 
-	mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val);
+	mt7530_rmw(priv, MT753X_MFC, MT7530_CPU_EN | MT7530_CPU_PORT_MASK, val);
 }
 
 static int mt7988_setup(struct dsa_switch *ds)
@@ -3160,16 +3158,19 @@ const struct dsa_switch_ops mt7530_switch_ops = {
 	.port_mirror_add	= mt753x_port_mirror_add,
 	.port_mirror_del	= mt753x_port_mirror_del,
 	.phylink_get_caps	= mt753x_phylink_get_caps,
-	.phylink_mac_select_pcs	= mt753x_phylink_mac_select_pcs,
-	.phylink_mac_config	= mt753x_phylink_mac_config,
-	.phylink_mac_link_down	= mt753x_phylink_mac_link_down,
-	.phylink_mac_link_up	= mt753x_phylink_mac_link_up,
 	.get_mac_eee		= mt753x_get_mac_eee,
 	.set_mac_eee		= mt753x_set_mac_eee,
 	.conduit_state_change	= mt753x_conduit_state_change,
 };
 EXPORT_SYMBOL_GPL(mt7530_switch_ops);
 
+static const struct phylink_mac_ops mt753x_phylink_mac_ops = {
+	.mac_select_pcs	= mt753x_phylink_mac_select_pcs,
+	.mac_config	= mt753x_phylink_mac_config,
+	.mac_link_down	= mt753x_phylink_mac_link_down,
+	.mac_link_up	= mt753x_phylink_mac_link_up,
+};
+
 const struct mt753x_info mt753x_table[] = {
 	[ID_MT7621] = {
 		.id = ID_MT7621,
@@ -3236,17 +3237,11 @@ mt7530_probe_common(struct mt7530_priv *priv)
 	if (!priv->info)
 		return -EINVAL;
 
-	/* Sanity check if these required device operations are filled
-	 * properly.
-	 */
-	if (!priv->info->sw_setup || !priv->info->phy_read_c22 ||
-	    !priv->info->phy_write_c22 || !priv->info->mac_port_get_caps)
-		return -EINVAL;
-
 	priv->id = priv->info->id;
 	priv->dev = dev;
 	priv->ds->priv = priv;
 	priv->ds->ops = &mt7530_switch_ops;
+	priv->ds->phylink_mac_ops = &mt753x_phylink_mac_ops;
 	mutex_init(&priv->reg_mutex);
 	dev_set_drvdata(dev, priv);
 
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index a08053390b28..2ea4e24628c6 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -36,78 +36,97 @@ enum mt753x_id {
 #define MT753X_AGC			0xc
 #define  LOCAL_EN			BIT(7)
 
-/* Registers to mac forward control for unknown frames */
-#define MT7530_MFC			0x10
-#define  BC_FFP(x)			(((x) & 0xff) << 24)
-#define  BC_FFP_MASK			BC_FFP(~0)
-#define  UNM_FFP(x)			(((x) & 0xff) << 16)
-#define  UNM_FFP_MASK			UNM_FFP(~0)
-#define  UNU_FFP(x)			(((x) & 0xff) << 8)
-#define  UNU_FFP_MASK			UNU_FFP(~0)
-#define  CPU_EN				BIT(7)
-#define  CPU_PORT_MASK			GENMASK(6, 4)
-#define  CPU_PORT(x)			FIELD_PREP(CPU_PORT_MASK, x)
-#define  MIRROR_EN			BIT(3)
-#define  MIRROR_PORT(x)			((x) & 0x7)
-#define  MIRROR_MASK			0x7
-
-/* Registers for CPU forward control */
+/* Register for MAC forward control */
+#define MT753X_MFC			0x10
+#define  BC_FFP_MASK			GENMASK(31, 24)
+#define  BC_FFP(x)			FIELD_PREP(BC_FFP_MASK, x)
+#define  UNM_FFP_MASK			GENMASK(23, 16)
+#define  UNM_FFP(x)			FIELD_PREP(UNM_FFP_MASK, x)
+#define  UNU_FFP_MASK			GENMASK(15, 8)
+#define  UNU_FFP(x)			FIELD_PREP(UNU_FFP_MASK, x)
+#define  MT7530_CPU_EN			BIT(7)
+#define  MT7530_CPU_PORT_MASK		GENMASK(6, 4)
+#define  MT7530_CPU_PORT(x)		FIELD_PREP(MT7530_CPU_PORT_MASK, x)
+#define  MT7530_MIRROR_EN		BIT(3)
+#define  MT7530_MIRROR_PORT_MASK	GENMASK(2, 0)
+#define  MT7530_MIRROR_PORT_GET(x)	FIELD_GET(MT7530_MIRROR_PORT_MASK, x)
+#define  MT7530_MIRROR_PORT_SET(x)	FIELD_PREP(MT7530_MIRROR_PORT_MASK, x)
+#define  MT7531_QRY_FFP_MASK		GENMASK(7, 0)
+#define  MT7531_QRY_FFP(x)		FIELD_PREP(MT7531_QRY_FFP_MASK, x)
+
+/* Register for CPU forward control */
 #define MT7531_CFC			0x4
 #define  MT7531_MIRROR_EN		BIT(19)
-#define  MT7531_MIRROR_MASK		(MIRROR_MASK << 16)
-#define  MT7531_MIRROR_PORT_GET(x)	(((x) >> 16) & MIRROR_MASK)
-#define  MT7531_MIRROR_PORT_SET(x)	(((x) & MIRROR_MASK) << 16)
+#define  MT7531_MIRROR_PORT_MASK	GENMASK(18, 16)
+#define  MT7531_MIRROR_PORT_GET(x)	FIELD_GET(MT7531_MIRROR_PORT_MASK, x)
+#define  MT7531_MIRROR_PORT_SET(x)	FIELD_PREP(MT7531_MIRROR_PORT_MASK, x)
 #define  MT7531_CPU_PMAP_MASK		GENMASK(7, 0)
 #define  MT7531_CPU_PMAP(x)		FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
 
-#define MT753X_MIRROR_REG(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
-					 MT7531_CFC : MT7530_MFC)
-#define MT753X_MIRROR_EN(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
-					 MT7531_MIRROR_EN : MIRROR_EN)
-#define MT753X_MIRROR_MASK(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
-					 MT7531_MIRROR_MASK : MIRROR_MASK)
+#define MT753X_MIRROR_REG(id)		((id == ID_MT7531 || \
+					  id == ID_MT7988) ? \
+					 MT7531_CFC : MT753X_MFC)
 
-/* Registers for BPDU and PAE frame control*/
+#define MT753X_MIRROR_EN(id)		((id == ID_MT7531 || \
+					  id == ID_MT7988) ? \
+					 MT7531_MIRROR_EN : MT7530_MIRROR_EN)
+
+#define MT753X_MIRROR_PORT_MASK(id)	((id == ID_MT7531 || \
+					  id == ID_MT7988) ? \
+					 MT7531_MIRROR_PORT_MASK : \
+					 MT7530_MIRROR_PORT_MASK)
+
+#define MT753X_MIRROR_PORT_GET(id, val)	((id == ID_MT7531 || \
+					  id == ID_MT7988) ? \
+					 MT7531_MIRROR_PORT_GET(val) : \
+					 MT7530_MIRROR_PORT_GET(val))
+
+#define MT753X_MIRROR_PORT_SET(id, val)	((id == ID_MT7531 || \
+					  id == ID_MT7988) ? \
+					 MT7531_MIRROR_PORT_SET(val) : \
+					 MT7530_MIRROR_PORT_SET(val))
+
+/* Register for BPDU and PAE frame control */
 #define MT753X_BPC			0x24
-#define  MT753X_PAE_BPDU_FR		BIT(25)
-#define  MT753X_PAE_EG_TAG_MASK		GENMASK(24, 22)
-#define  MT753X_PAE_EG_TAG(x)		FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
-#define  MT753X_PAE_PORT_FW_MASK	GENMASK(18, 16)
-#define  MT753X_PAE_PORT_FW(x)		FIELD_PREP(MT753X_PAE_PORT_FW_MASK, x)
-#define  MT753X_BPDU_EG_TAG_MASK	GENMASK(8, 6)
-#define  MT753X_BPDU_EG_TAG(x)		FIELD_PREP(MT753X_BPDU_EG_TAG_MASK, x)
-#define  MT753X_BPDU_PORT_FW_MASK	GENMASK(2, 0)
-
-/* Register for :01 and :02 MAC DA frame control */
+#define  PAE_BPDU_FR			BIT(25)
+#define  PAE_EG_TAG_MASK		GENMASK(24, 22)
+#define  PAE_EG_TAG(x)			FIELD_PREP(PAE_EG_TAG_MASK, x)
+#define  PAE_PORT_FW_MASK		GENMASK(18, 16)
+#define  PAE_PORT_FW(x)			FIELD_PREP(PAE_PORT_FW_MASK, x)
+#define  BPDU_EG_TAG_MASK		GENMASK(8, 6)
+#define  BPDU_EG_TAG(x)			FIELD_PREP(BPDU_EG_TAG_MASK, x)
+#define  BPDU_PORT_FW_MASK		GENMASK(2, 0)
+
+/* Register for 01-80-C2-00-00-[01,02] MAC DA frame control */
 #define MT753X_RGAC1			0x28
-#define  MT753X_R02_BPDU_FR		BIT(25)
-#define  MT753X_R02_EG_TAG_MASK		GENMASK(24, 22)
-#define  MT753X_R02_EG_TAG(x)		FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
-#define  MT753X_R02_PORT_FW_MASK	GENMASK(18, 16)
-#define  MT753X_R02_PORT_FW(x)		FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
-#define  MT753X_R01_BPDU_FR		BIT(9)
-#define  MT753X_R01_EG_TAG_MASK		GENMASK(8, 6)
-#define  MT753X_R01_EG_TAG(x)		FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
-#define  MT753X_R01_PORT_FW_MASK	GENMASK(2, 0)
-
-/* Register for :03 and :0E MAC DA frame control */
+#define  R02_BPDU_FR			BIT(25)
+#define  R02_EG_TAG_MASK		GENMASK(24, 22)
+#define  R02_EG_TAG(x)			FIELD_PREP(R02_EG_TAG_MASK, x)
+#define  R02_PORT_FW_MASK		GENMASK(18, 16)
+#define  R02_PORT_FW(x)			FIELD_PREP(R02_PORT_FW_MASK, x)
+#define  R01_BPDU_FR			BIT(9)
+#define  R01_EG_TAG_MASK		GENMASK(8, 6)
+#define  R01_EG_TAG(x)			FIELD_PREP(R01_EG_TAG_MASK, x)
+#define  R01_PORT_FW_MASK		GENMASK(2, 0)
+
+/* Register for 01-80-C2-00-00-[03,0E] MAC DA frame control */
 #define MT753X_RGAC2			0x2c
-#define  MT753X_R0E_BPDU_FR		BIT(25)
-#define  MT753X_R0E_EG_TAG_MASK		GENMASK(24, 22)
-#define  MT753X_R0E_EG_TAG(x)		FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
-#define  MT753X_R0E_PORT_FW_MASK	GENMASK(18, 16)
-#define  MT753X_R0E_PORT_FW(x)		FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
-#define  MT753X_R03_BPDU_FR		BIT(9)
-#define  MT753X_R03_EG_TAG_MASK		GENMASK(8, 6)
-#define  MT753X_R03_EG_TAG(x)		FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
-#define  MT753X_R03_PORT_FW_MASK	GENMASK(2, 0)
-
-enum mt753x_bpdu_port_fw {
-	MT753X_BPDU_FOLLOW_MFC,
-	MT753X_BPDU_CPU_EXCLUDE = 4,
-	MT753X_BPDU_CPU_INCLUDE = 5,
-	MT753X_BPDU_CPU_ONLY = 6,
-	MT753X_BPDU_DROP = 7,
+#define  R0E_BPDU_FR			BIT(25)
+#define  R0E_EG_TAG_MASK		GENMASK(24, 22)
+#define  R0E_EG_TAG(x)			FIELD_PREP(R0E_EG_TAG_MASK, x)
+#define  R0E_PORT_FW_MASK		GENMASK(18, 16)
+#define  R0E_PORT_FW(x)			FIELD_PREP(R0E_PORT_FW_MASK, x)
+#define  R03_BPDU_FR			BIT(9)
+#define  R03_EG_TAG_MASK		GENMASK(8, 6)
+#define  R03_EG_TAG(x)			FIELD_PREP(R03_EG_TAG_MASK, x)
+#define  R03_PORT_FW_MASK		GENMASK(2, 0)
+
+enum mt753x_to_cpu_fw {
+	TO_CPU_FW_SYSTEM_DEFAULT,
+	TO_CPU_FW_CPU_EXCLUDE = 4,
+	TO_CPU_FW_CPU_INCLUDE = 5,
+	TO_CPU_FW_CPU_ONLY = 6,
+	TO_CPU_FW_DROP = 7,
 };
 
 /* Registers for address table access */
@@ -304,48 +323,55 @@ enum mt7530_vlan_port_acc_frm {
 #define  G0_PORT_VID_DEF		G0_PORT_VID(0)
 
 /* Register for port MAC control register */
-#define MT7530_PMCR_P(x)		(0x3000 + ((x) * 0x100))
-#define  PMCR_IFG_XMIT(x)		(((x) & 0x3) << 18)
+#define MT753X_PMCR_P(x)		(0x3000 + ((x) * 0x100))
+#define  PMCR_IFG_XMIT_MASK		GENMASK(19, 18)
+#define  PMCR_IFG_XMIT(x)		FIELD_PREP(PMCR_IFG_XMIT_MASK, x)
 #define  PMCR_EXT_PHY			BIT(17)
 #define  PMCR_MAC_MODE			BIT(16)
-#define  PMCR_FORCE_MODE		BIT(15)
-#define  PMCR_TX_EN			BIT(14)
-#define  PMCR_RX_EN			BIT(13)
+#define  MT7530_FORCE_MODE		BIT(15)
+#define  PMCR_MAC_TX_EN			BIT(14)
+#define  PMCR_MAC_RX_EN			BIT(13)
 #define  PMCR_BACKOFF_EN		BIT(9)
 #define  PMCR_BACKPR_EN			BIT(8)
 #define  PMCR_FORCE_EEE1G		BIT(7)
 #define  PMCR_FORCE_EEE100		BIT(6)
-#define  PMCR_TX_FC_EN			BIT(5)
-#define  PMCR_RX_FC_EN			BIT(4)
+#define  PMCR_FORCE_RX_FC_EN		BIT(5)
+#define  PMCR_FORCE_TX_FC_EN		BIT(4)
 #define  PMCR_FORCE_SPEED_1000		BIT(3)
 #define  PMCR_FORCE_SPEED_100		BIT(2)
 #define  PMCR_FORCE_FDX			BIT(1)
 #define  PMCR_FORCE_LNK			BIT(0)
-#define  PMCR_SPEED_MASK		(PMCR_FORCE_SPEED_100 | \
-					 PMCR_FORCE_SPEED_1000)
-#define  MT7531_FORCE_LNK		BIT(31)
-#define  MT7531_FORCE_SPD		BIT(30)
-#define  MT7531_FORCE_DPX		BIT(29)
-#define  MT7531_FORCE_RX_FC		BIT(28)
-#define  MT7531_FORCE_TX_FC		BIT(27)
-#define  MT7531_FORCE_MODE		(MT7531_FORCE_LNK | \
-					 MT7531_FORCE_SPD | \
-					 MT7531_FORCE_DPX | \
-					 MT7531_FORCE_RX_FC | \
-					 MT7531_FORCE_TX_FC)
-#define  PMCR_LINK_SETTINGS_MASK	(PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
-					 PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
-					 PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
-					 PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
-					 PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
-
-#define MT7530_PMEEECR_P(x)		(0x3004 + (x) * 0x100)
-#define  WAKEUP_TIME_1000(x)		(((x) & 0xFF) << 24)
-#define  WAKEUP_TIME_100(x)		(((x) & 0xFF) << 16)
+#define  MT7531_FORCE_MODE_LNK		BIT(31)
+#define  MT7531_FORCE_MODE_SPD		BIT(30)
+#define  MT7531_FORCE_MODE_DPX		BIT(29)
+#define  MT7531_FORCE_MODE_RX_FC	BIT(28)
+#define  MT7531_FORCE_MODE_TX_FC	BIT(27)
+#define  MT7531_FORCE_MODE_EEE100	BIT(26)
+#define  MT7531_FORCE_MODE_EEE1G	BIT(25)
+#define  MT7531_FORCE_MODE_MASK		(MT7531_FORCE_MODE_LNK | \
+					 MT7531_FORCE_MODE_SPD | \
+					 MT7531_FORCE_MODE_DPX | \
+					 MT7531_FORCE_MODE_RX_FC | \
+					 MT7531_FORCE_MODE_TX_FC | \
+					 MT7531_FORCE_MODE_EEE100 | \
+					 MT7531_FORCE_MODE_EEE1G)
+#define  PMCR_LINK_SETTINGS_MASK	(PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \
+					 PMCR_FORCE_EEE1G | \
+					 PMCR_FORCE_EEE100 | \
+					 PMCR_FORCE_RX_FC_EN | \
+					 PMCR_FORCE_TX_FC_EN | \
+					 PMCR_FORCE_SPEED_1000 | \
+					 PMCR_FORCE_SPEED_100 | \
+					 PMCR_FORCE_FDX | PMCR_FORCE_LNK)
+
+#define MT753X_PMEEECR_P(x)		(0x3004 + (x) * 0x100)
+#define  WAKEUP_TIME_1000_MASK		GENMASK(31, 24)
+#define  WAKEUP_TIME_1000(x)		FIELD_PREP(WAKEUP_TIME_1000_MASK, x)
+#define  WAKEUP_TIME_100_MASK		GENMASK(23, 16)
+#define  WAKEUP_TIME_100(x)		FIELD_PREP(WAKEUP_TIME_100_MASK, x)
 #define  LPI_THRESH_MASK		GENMASK(15, 4)
-#define  LPI_THRESH_SHT			4
-#define  SET_LPI_THRESH(x)		(((x) << LPI_THRESH_SHT) & LPI_THRESH_MASK)
-#define  GET_LPI_THRESH(x)		(((x) & LPI_THRESH_MASK) >> LPI_THRESH_SHT)
+#define  LPI_THRESH_GET(x)		FIELD_GET(LPI_THRESH_MASK, x)
+#define  LPI_THRESH_SET(x)		FIELD_PREP(LPI_THRESH_MASK, x)
 #define  LPI_MODE_EN			BIT(0)
 
 #define MT7530_PMSR_P(x)		(0x3008 + (x) * 0x100)
@@ -470,32 +496,30 @@ enum mt7531_clk_skew {
 	MT7531_CLK_SKEW_REVERSE = 3,
 };
 
-/* Register for hw trap status */
-#define MT7530_HWTRAP			0x7800
-#define  HWTRAP_XTAL_MASK		(BIT(10) | BIT(9))
-#define  HWTRAP_XTAL_25MHZ		(BIT(10) | BIT(9))
-#define  HWTRAP_XTAL_40MHZ		(BIT(10))
-#define  HWTRAP_XTAL_20MHZ		(BIT(9))
-
-#define MT7531_HWTRAP			0x7800
-#define  HWTRAP_XTAL_FSEL_MASK		BIT(7)
-#define  HWTRAP_XTAL_FSEL_25MHZ		BIT(7)
-#define  HWTRAP_XTAL_FSEL_40MHZ		0
-/* Unique fields of (M)HWSTRAP for MT7531 */
-#define  XTAL_FSEL_S			7
-#define  XTAL_FSEL_M			BIT(7)
-#define  PHY_EN				BIT(6)
-#define  CHG_STRAP			BIT(8)
-
-/* Register for hw trap modification */
-#define MT7530_MHWTRAP			0x7804
-#define  MHWTRAP_PHY0_SEL		BIT(20)
-#define  MHWTRAP_MANUAL			BIT(16)
-#define  MHWTRAP_P5_MAC_SEL		BIT(13)
-#define  MHWTRAP_P6_DIS			BIT(8)
-#define  MHWTRAP_P5_RGMII_MODE		BIT(7)
-#define  MHWTRAP_P5_DIS			BIT(6)
-#define  MHWTRAP_PHY_ACCESS		BIT(5)
+/* Register for trap status */
+#define MT753X_TRAP			0x7800
+#define  MT7530_XTAL_MASK		(BIT(10) | BIT(9))
+#define  MT7530_XTAL_25MHZ		(BIT(10) | BIT(9))
+#define  MT7530_XTAL_40MHZ		BIT(10)
+#define  MT7530_XTAL_20MHZ		BIT(9)
+#define  MT7531_XTAL25			BIT(7)
+
+/* Register for trap modification */
+#define MT753X_MTRAP			0x7804
+#define  MT7530_P5_PHY0_SEL		BIT(20)
+#define  MT7530_CHG_TRAP		BIT(16)
+#define  MT7530_P5_MAC_SEL		BIT(13)
+#define  MT7530_P6_DIS			BIT(8)
+#define  MT7530_P5_RGMII_MODE		BIT(7)
+#define  MT7530_P5_DIS			BIT(6)
+#define  MT7530_PHY_INDIRECT_ACCESS	BIT(5)
+#define  MT7531_CHG_STRAP		BIT(8)
+#define  MT7531_PHY_EN			BIT(6)
+
+enum mt7531_xtal_fsel {
+	MT7531_XTAL_FSEL_25MHZ,
+	MT7531_XTAL_FSEL_40MHZ,
+};
 
 /* Register for TOP signal control */
 #define MT7530_TOP_SIG_CTRL		0x7808
@@ -629,7 +653,7 @@ enum mt7531_clk_skew {
 #define  MT7531_PHY_PLL_OFF		BIT(5)
 #define  MT7531_PHY_PLL_BYPASS_MODE	BIT(4)
 
-#define MT753X_CTRL_PHY_ADDR		0
+#define MT753X_CTRL_PHY_ADDR(addr)	((addr + 1) & 0x1f)
 
 #define CORE_PLL_GROUP5			0x404
 #define  RG_LCDDS_PCW_NCPO1(x)		((x) & 0xffff)
@@ -702,12 +726,11 @@ struct mt7530_port {
 	struct phylink_pcs *sgmii_pcs;
 };
 
-/* Port 5 interface select definitions */
-enum p5_interface_select {
-	P5_DISABLED,
-	P5_INTF_SEL_PHY_P0,
-	P5_INTF_SEL_PHY_P4,
-	P5_INTF_SEL_GMAC5,
+/* Port 5 mode definitions of the MT7530 switch */
+enum mt7530_p5_mode {
+	GMAC5,
+	MUX_PHY_P0,
+	MUX_PHY_P4,
 };
 
 struct mt7530_priv;
@@ -720,15 +743,14 @@ struct mt753x_pcs {
 
 /* struct mt753x_info -	This is the main data structure for holding the specific
  *			part for each supported device
+ * @id:			Holding the identifier to a switch model
+ * @pcs_ops:		Holding the pointer to the MAC PCS operations structure
  * @sw_setup:		Holding the handler to a device initialization
  * @phy_read_c22:	Holding the way reading PHY port using C22
  * @phy_write_c22:	Holding the way writing PHY port using C22
  * @phy_read_c45:	Holding the way reading PHY port using C45
  * @phy_write_c45:	Holding the way writing PHY port using C45
- * @phy_mode_supported:	Check if the PHY type is being supported on a certain
- *			port
- * @mac_port_validate:	Holding the way to set addition validate type for a
- *			certan MAC port
+ * @mac_port_get_caps:	Holding the handler that provides MAC capabilities
  * @mac_port_config:	Holding the way setting up the PHY attribute to a
  *			certain MAC port
  */
@@ -747,9 +769,6 @@ struct mt753x_info {
 			     int regnum, u16 val);
 	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
 				  struct phylink_config *config);
-	void (*mac_port_validate)(struct dsa_switch *ds, int port,
-				  phy_interface_t interface,
-				  unsigned long *supported);
 	void (*mac_port_config)(struct dsa_switch *ds, int port,
 				unsigned int mode,
 				phy_interface_t interface);
@@ -770,7 +789,7 @@ struct mt753x_info {
  * @ports:		Holding the state among ports
  * @reg_mutex:		The lock for protecting among process accessing
  *			registers
- * @p5_intf_sel:	Holding the current port 5 interface select
+ * @p5_mode:		Holding the current mode of port 5 of the MT7530 switch
  * @p5_sgmii:		Flag for distinguishing if port 5 of the MT7531 switch
  *			has got SGMII
  * @irq:		IRQ number of the switch
@@ -778,6 +797,7 @@ struct mt753x_info {
  * @irq_enable:		IRQ enable bits, synced to SYS_INT_EN
  * @create_sgmii:	Pointer to function creating SGMII PCS instance(s)
  * @active_cpu_ports:	Holding the active CPU ports
+ * @mdiodev:		The pointer to the MDIO device structure
  */
 struct mt7530_priv {
 	struct device		*dev;
@@ -791,7 +811,7 @@ struct mt7530_priv {
 	const struct mt753x_info *info;
 	unsigned int		id;
 	bool			mcm;
-	enum p5_interface_select p5_intf_sel;
+	enum mt7530_p5_mode	p5_mode;
 	bool			p5_sgmii;
 	u8			mirror_rx;
 	u8			mirror_tx;
@@ -804,6 +824,7 @@ struct mt7530_priv {
 	u32 irq_enable;
 	int (*create_sgmii)(struct mt7530_priv *priv);
 	u8 active_cpu_ports;
+	struct mdio_device *mdiodev;
 };
 
 struct mt7530_hw_vlan_entry {
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 0918bd6fa81d..07c897b13de1 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -131,8 +131,8 @@ struct mii_bus *mv88e6xxx_default_mdio_bus(struct mv88e6xxx_chip *chip)
 {
 	struct mv88e6xxx_mdio_bus *mdio_bus;
 
-	mdio_bus = list_first_entry(&chip->mdios, struct mv88e6xxx_mdio_bus,
-				    list);
+	mdio_bus = list_first_entry_or_null(&chip->mdios,
+					    struct mv88e6xxx_mdio_bus, list);
 	if (!mdio_bus)
 		return NULL;
 
@@ -861,24 +861,27 @@ static void mv88e6xxx_get_caps(struct dsa_switch *ds, int port,
 	}
 }
 
-static struct phylink_pcs *mv88e6xxx_mac_select_pcs(struct dsa_switch *ds,
-						    int port,
-						    phy_interface_t interface)
+static struct phylink_pcs *
+mv88e6xxx_mac_select_pcs(struct phylink_config *config,
+			 phy_interface_t interface)
 {
-	struct mv88e6xxx_chip *chip = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mv88e6xxx_chip *chip = dp->ds->priv;
 	struct phylink_pcs *pcs = ERR_PTR(-EOPNOTSUPP);
 
 	if (chip->info->ops->pcs_ops)
-		pcs = chip->info->ops->pcs_ops->pcs_select(chip, port,
+		pcs = chip->info->ops->pcs_ops->pcs_select(chip, dp->index,
 							   interface);
 
 	return pcs;
 }
 
-static int mv88e6xxx_mac_prepare(struct dsa_switch *ds, int port,
+static int mv88e6xxx_mac_prepare(struct phylink_config *config,
 				 unsigned int mode, phy_interface_t interface)
 {
-	struct mv88e6xxx_chip *chip = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mv88e6xxx_chip *chip = dp->ds->priv;
+	int port = dp->index;
 	int err = 0;
 
 	/* In inband mode, the link may come up at any time while the link
@@ -897,11 +900,13 @@ static int mv88e6xxx_mac_prepare(struct dsa_switch *ds, int port,
 	return err;
 }
 
-static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port,
+static void mv88e6xxx_mac_config(struct phylink_config *config,
 				 unsigned int mode,
 				 const struct phylink_link_state *state)
 {
-	struct mv88e6xxx_chip *chip = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mv88e6xxx_chip *chip = dp->ds->priv;
+	int port = dp->index;
 	int err = 0;
 
 	mv88e6xxx_reg_lock(chip);
@@ -917,13 +922,15 @@ err_unlock:
 	mv88e6xxx_reg_unlock(chip);
 
 	if (err && err != -EOPNOTSUPP)
-		dev_err(ds->dev, "p%d: failed to configure MAC/PCS\n", port);
+		dev_err(chip->dev, "p%d: failed to configure MAC/PCS\n", port);
 }
 
-static int mv88e6xxx_mac_finish(struct dsa_switch *ds, int port,
+static int mv88e6xxx_mac_finish(struct phylink_config *config,
 				unsigned int mode, phy_interface_t interface)
 {
-	struct mv88e6xxx_chip *chip = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mv88e6xxx_chip *chip = dp->ds->priv;
+	int port = dp->index;
 	int err = 0;
 
 	/* Undo the forced down state above after completing configuration
@@ -947,12 +954,14 @@ static int mv88e6xxx_mac_finish(struct dsa_switch *ds, int port,
 	return err;
 }
 
-static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port,
+static void mv88e6xxx_mac_link_down(struct phylink_config *config,
 				    unsigned int mode,
 				    phy_interface_t interface)
 {
-	struct mv88e6xxx_chip *chip = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mv88e6xxx_chip *chip = dp->ds->priv;
 	const struct mv88e6xxx_ops *ops;
+	int port = dp->index;
 	int err = 0;
 
 	ops = chip->info->ops;
@@ -975,14 +984,16 @@ static void mv88e6xxx_mac_link_down(struct dsa_switch *ds, int port,
 			"p%d: failed to force MAC link down\n", port);
 }
 
-static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port,
-				  unsigned int mode, phy_interface_t interface,
+static void mv88e6xxx_mac_link_up(struct phylink_config *config,
 				  struct phy_device *phydev,
+				  unsigned int mode, phy_interface_t interface,
 				  int speed, int duplex,
 				  bool tx_pause, bool rx_pause)
 {
-	struct mv88e6xxx_chip *chip = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct mv88e6xxx_chip *chip = dp->ds->priv;
 	const struct mv88e6xxx_ops *ops;
+	int port = dp->index;
 	int err = 0;
 
 	ops = chip->info->ops;
@@ -1008,7 +1019,7 @@ error:
 	mv88e6xxx_reg_unlock(chip);
 
 	if (err && err != -EOPNOTSUPP)
-		dev_err(ds->dev,
+		dev_err(chip->dev,
 			"p%d: failed to configure MAC link up\n", port);
 }
 
@@ -3146,6 +3157,7 @@ static int mv88e6xxx_software_reset(struct mv88e6xxx_chip *chip)
 static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip)
 {
 	struct gpio_desc *gpiod = chip->reset;
+	int err;
 
 	/* If there is a GPIO connected to the reset pin, toggle it */
 	if (gpiod) {
@@ -3154,17 +3166,26 @@ static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip)
 		 * mid-byte, causing the first EEPROM read after the reset
 		 * from the wrong location resulting in the switch booting
 		 * to wrong mode and inoperable.
+		 * For this reason, switch families with EEPROM support
+		 * generally wait for EEPROM loads to complete as their pre-
+		 * and post-reset handlers.
 		 */
-		if (chip->info->ops->get_eeprom)
-			mv88e6xxx_g2_eeprom_wait(chip);
+		if (chip->info->ops->hardware_reset_pre) {
+			err = chip->info->ops->hardware_reset_pre(chip);
+			if (err)
+				dev_err(chip->dev, "pre-reset error: %d\n", err);
+		}
 
 		gpiod_set_value_cansleep(gpiod, 1);
 		usleep_range(10000, 20000);
 		gpiod_set_value_cansleep(gpiod, 0);
 		usleep_range(10000, 20000);
 
-		if (chip->info->ops->get_eeprom)
-			mv88e6xxx_g2_eeprom_wait(chip);
+		if (chip->info->ops->hardware_reset_post) {
+			err = chip->info->ops->hardware_reset_post(chip);
+			if (err)
+				dev_err(chip->dev, "post-reset error: %d\n", err);
+		}
 	}
 }
 
@@ -4394,6 +4415,8 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
 	.watchdog_ops = &mv88e6390_watchdog_ops,
 	.mgmt_rsvd2cpu =  mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4584,6 +4607,8 @@ static const struct mv88e6xxx_ops mv88e6172_ops = {
 	.watchdog_ops = &mv88e6097_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6352_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4684,6 +4709,8 @@ static const struct mv88e6xxx_ops mv88e6176_ops = {
 	.watchdog_ops = &mv88e6097_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6352_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4778,6 +4805,8 @@ static const struct mv88e6xxx_ops mv88e6190_ops = {
 	.watchdog_ops = &mv88e6390_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4836,6 +4865,8 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
 	.watchdog_ops = &mv88e6390_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4892,6 +4923,8 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
 	.watchdog_ops = &mv88e6390_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4951,6 +4984,8 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
 	.watchdog_ops = &mv88e6097_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6352_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5004,6 +5039,8 @@ static const struct mv88e6xxx_ops mv88e6250_ops = {
 	.watchdog_ops = &mv88e6250_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6250_g1_wait_eeprom_done_prereset,
+	.hardware_reset_post = mv88e6xxx_g1_wait_eeprom_done,
 	.reset = mv88e6250_g1_reset,
 	.vtu_getnext = mv88e6185_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
@@ -5051,6 +5088,8 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
 	.watchdog_ops = &mv88e6390_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5110,6 +5149,8 @@ static const struct mv88e6xxx_ops mv88e6320_ops = {
 	.watchdog_ops = &mv88e6390_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.vtu_getnext = mv88e6185_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
@@ -5156,6 +5197,8 @@ static const struct mv88e6xxx_ops mv88e6321_ops = {
 	.set_egress_port = mv88e6095_g1_set_egress_port,
 	.watchdog_ops = &mv88e6390_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.vtu_getnext = mv88e6185_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
@@ -5206,6 +5249,8 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
 	.watchdog_ops = &mv88e6390_watchdog_ops,
 	.mgmt_rsvd2cpu =  mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5361,6 +5406,8 @@ static const struct mv88e6xxx_ops mv88e6352_ops = {
 	.watchdog_ops = &mv88e6097_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6352_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5423,6 +5470,8 @@ static const struct mv88e6xxx_ops mv88e6390_ops = {
 	.watchdog_ops = &mv88e6390_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5485,6 +5534,8 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
 	.watchdog_ops = &mv88e6390_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5550,6 +5601,8 @@ static const struct mv88e6xxx_ops mv88e6393x_ops = {
 	.watchdog_ops = &mv88e6393x_watchdog_ops,
 	.mgmt_rsvd2cpu = mv88e6393x_port_mgmt_rsvd2cpu,
 	.pot_clear = mv88e6xxx_g2_pot_clear,
+	.hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+	.hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
 	.reset = mv88e6352_g1_reset,
 	.rmu_disable = mv88e6390_g1_rmu_disable,
 	.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -6993,6 +7046,15 @@ static int mv88e6xxx_crosschip_lag_leave(struct dsa_switch *ds, int sw_index,
 	return err_sync ? : err_pvt;
 }
 
+static const struct phylink_mac_ops mv88e6xxx_phylink_mac_ops = {
+	.mac_select_pcs		= mv88e6xxx_mac_select_pcs,
+	.mac_prepare		= mv88e6xxx_mac_prepare,
+	.mac_config		= mv88e6xxx_mac_config,
+	.mac_finish		= mv88e6xxx_mac_finish,
+	.mac_link_down		= mv88e6xxx_mac_link_down,
+	.mac_link_up		= mv88e6xxx_mac_link_up,
+};
+
 static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
 	.get_tag_protocol	= mv88e6xxx_get_tag_protocol,
 	.change_tag_protocol	= mv88e6xxx_change_tag_protocol,
@@ -7001,12 +7063,6 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
 	.port_setup		= mv88e6xxx_port_setup,
 	.port_teardown		= mv88e6xxx_port_teardown,
 	.phylink_get_caps	= mv88e6xxx_get_caps,
-	.phylink_mac_select_pcs	= mv88e6xxx_mac_select_pcs,
-	.phylink_mac_prepare	= mv88e6xxx_mac_prepare,
-	.phylink_mac_config	= mv88e6xxx_mac_config,
-	.phylink_mac_finish	= mv88e6xxx_mac_finish,
-	.phylink_mac_link_down	= mv88e6xxx_mac_link_down,
-	.phylink_mac_link_up	= mv88e6xxx_mac_link_up,
 	.get_strings		= mv88e6xxx_get_strings,
 	.get_ethtool_stats	= mv88e6xxx_get_ethtool_stats,
 	.get_eth_mac_stats	= mv88e6xxx_get_eth_mac_stats,
@@ -7075,6 +7131,7 @@ static int mv88e6xxx_register_switch(struct mv88e6xxx_chip *chip)
 	ds->priv = chip;
 	ds->dev = dev;
 	ds->ops = &mv88e6xxx_switch_ops;
+	ds->phylink_mac_ops = &mv88e6xxx_phylink_mac_ops;
 	ds->ageing_time_min = chip->info->age_time_coeff;
 	ds->ageing_time_max = chip->info->age_time_coeff * U8_MAX;
 
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 85eb293381a7..c34caf9815c5 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -487,6 +487,12 @@ struct mv88e6xxx_ops {
 	int (*ppu_enable)(struct mv88e6xxx_chip *chip);
 	int (*ppu_disable)(struct mv88e6xxx_chip *chip);
 
+	/* Additional handlers to run before and after hard reset, to make sure
+	 * that the switch and EEPROM are in a good state.
+	 */
+	int (*hardware_reset_pre)(struct mv88e6xxx_chip *chip);
+	int (*hardware_reset_post)(struct mv88e6xxx_chip *chip);
+
 	/* Switch Software Reset */
 	int (*reset)(struct mv88e6xxx_chip *chip);
 
diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c
index 49444a72ff09..9820cd596757 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -75,6 +75,95 @@ static int mv88e6xxx_g1_wait_init_ready(struct mv88e6xxx_chip *chip)
 	return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_STS, bit, 1);
 }
 
+static int mv88e6250_g1_eeprom_reload(struct mv88e6xxx_chip *chip)
+{
+	/* MV88E6185_G1_CTL1_RELOAD_EEPROM is also valid for 88E6250 */
+	int bit = __bf_shf(MV88E6185_G1_CTL1_RELOAD_EEPROM);
+	u16 val;
+	int err;
+
+	err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &val);
+	if (err)
+		return err;
+
+	val |= MV88E6185_G1_CTL1_RELOAD_EEPROM;
+
+	err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_CTL1, val);
+	if (err)
+		return err;
+
+	return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_CTL1, bit, 0);
+}
+
+/* Returns 0 when done, -EBUSY when waiting, other negative codes on error */
+static int mv88e6xxx_g1_is_eeprom_done(struct mv88e6xxx_chip *chip)
+{
+	u16 val;
+	int err;
+
+	err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_STS, &val);
+	if (err < 0) {
+		dev_err(chip->dev, "Error reading status");
+		return err;
+	}
+
+	/* If the switch is still resetting, it may not
+	 * respond on the bus, and so MDIO read returns
+	 * 0xffff. Differentiate between that, and waiting for
+	 * the EEPROM to be done by bit 0 being set.
+	 */
+	if (val == 0xffff || !(val & BIT(MV88E6XXX_G1_STS_IRQ_EEPROM_DONE)))
+		return -EBUSY;
+
+	return 0;
+}
+
+/* As the EEInt (EEPROM done) flag clears on read if the status register, this
+ * function must be called directly after a hard reset or EEPROM ReLoad request,
+ * or the done condition may have been missed
+ */
+int mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip)
+{
+	const unsigned long timeout = jiffies + 1 * HZ;
+	int ret;
+
+	/* Wait up to 1 second for the switch to finish reading the
+	 * EEPROM.
+	 */
+	while (time_before(jiffies, timeout)) {
+		ret = mv88e6xxx_g1_is_eeprom_done(chip);
+		if (ret != -EBUSY)
+			return ret;
+	}
+
+	dev_err(chip->dev, "Timeout waiting for EEPROM done");
+	return -ETIMEDOUT;
+}
+
+int mv88e6250_g1_wait_eeprom_done_prereset(struct mv88e6xxx_chip *chip)
+{
+	int ret;
+
+	ret = mv88e6xxx_g1_is_eeprom_done(chip);
+	if (ret != -EBUSY)
+		return ret;
+
+	/* Pre-reset, we don't know the state of the switch - when
+	 * mv88e6xxx_g1_is_eeprom_done() returns -EBUSY, that may be because
+	 * the switch is actually busy reading the EEPROM, or because
+	 * MV88E6XXX_G1_STS_IRQ_EEPROM_DONE has been cleared by an unrelated
+	 * status register read already.
+	 *
+	 * To account for the latter case, trigger another EEPROM reload for
+	 * another chance at seeing the done flag.
+	 */
+	ret = mv88e6250_g1_eeprom_reload(chip);
+	if (ret)
+		return ret;
+
+	return mv88e6xxx_g1_wait_eeprom_done(chip);
+}
+
 /* Offset 0x01: Switch MAC Address Register Bytes 0 & 1
  * Offset 0x02: Switch MAC Address Register Bytes 2 & 3
  * Offset 0x03: Switch MAC Address Register Bytes 4 & 5
diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h
index 1095261f5b49..3dbb7a1b8fe1 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.h
+++ b/drivers/net/dsa/mv88e6xxx/global1.h
@@ -282,6 +282,8 @@ int mv88e6xxx_g1_set_switch_mac(struct mv88e6xxx_chip *chip, u8 *addr);
 int mv88e6185_g1_reset(struct mv88e6xxx_chip *chip);
 int mv88e6352_g1_reset(struct mv88e6xxx_chip *chip);
 int mv88e6250_g1_reset(struct mv88e6xxx_chip *chip);
+int mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip);
+int mv88e6250_g1_wait_eeprom_done_prereset(struct mv88e6xxx_chip *chip);
 
 int mv88e6185_g1_ppu_enable(struct mv88e6xxx_chip *chip);
 int mv88e6185_g1_ppu_disable(struct mv88e6xxx_chip *chip);
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 3c5509e75a54..85952d841f28 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1755,6 +1755,9 @@ static int vsc9959_stream_identify(struct flow_cls_offload *f,
 	      BIT_ULL(FLOW_DISSECTOR_KEY_ETH_ADDRS)))
 		return -EOPNOTSUPP;
 
+	if (flow_rule_match_has_control_flags(rule, f->common.extack))
+		return -EOPNOTSUPP;
+
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
 		struct flow_match_eth_addrs match;
 
diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index 8d9d271ac3af..968cb81088bf 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -523,28 +523,30 @@ static void ar9331_sw_phylink_get_caps(struct dsa_switch *ds, int port,
 	}
 }
 
-static void ar9331_sw_phylink_mac_config(struct dsa_switch *ds, int port,
+static void ar9331_sw_phylink_mac_config(struct phylink_config *config,
 					 unsigned int mode,
 					 const struct phylink_link_state *state)
 {
-	struct ar9331_sw_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ar9331_sw_priv *priv = dp->ds->priv;
 	struct regmap *regmap = priv->regmap;
 	int ret;
 
-	ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port),
+	ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(dp->index),
 				 AR9331_SW_PORT_STATUS_LINK_EN |
 				 AR9331_SW_PORT_STATUS_FLOW_LINK_EN, 0);
 	if (ret)
 		dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
 }
 
-static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port,
+static void ar9331_sw_phylink_mac_link_down(struct phylink_config *config,
 					    unsigned int mode,
 					    phy_interface_t interface)
 {
-	struct ar9331_sw_priv *priv = ds->priv;
-	struct ar9331_sw_port *p = &priv->port[port];
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ar9331_sw_priv *priv = dp->ds->priv;
 	struct regmap *regmap = priv->regmap;
+	int port = dp->index;
 	int ret;
 
 	ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port),
@@ -552,23 +554,24 @@ static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port,
 	if (ret)
 		dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
 
-	cancel_delayed_work_sync(&p->mib_read);
+	cancel_delayed_work_sync(&priv->port[port].mib_read);
 }
 
-static void ar9331_sw_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void ar9331_sw_phylink_mac_link_up(struct phylink_config *config,
+					  struct phy_device *phydev,
 					  unsigned int mode,
 					  phy_interface_t interface,
-					  struct phy_device *phydev,
 					  int speed, int duplex,
 					  bool tx_pause, bool rx_pause)
 {
-	struct ar9331_sw_priv *priv = ds->priv;
-	struct ar9331_sw_port *p = &priv->port[port];
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ar9331_sw_priv *priv = dp->ds->priv;
 	struct regmap *regmap = priv->regmap;
+	int port = dp->index;
 	u32 val;
 	int ret;
 
-	schedule_delayed_work(&p->mib_read, 0);
+	schedule_delayed_work(&priv->port[port].mib_read, 0);
 
 	val = AR9331_SW_PORT_STATUS_MAC_MASK;
 	switch (speed) {
@@ -684,14 +687,17 @@ static void ar9331_get_pause_stats(struct dsa_switch *ds, int port,
 	spin_unlock(&p->stats_lock);
 }
 
+static const struct phylink_mac_ops ar9331_phylink_mac_ops = {
+	.mac_config	= ar9331_sw_phylink_mac_config,
+	.mac_link_down	= ar9331_sw_phylink_mac_link_down,
+	.mac_link_up	= ar9331_sw_phylink_mac_link_up,
+};
+
 static const struct dsa_switch_ops ar9331_sw_ops = {
 	.get_tag_protocol	= ar9331_sw_get_tag_protocol,
 	.setup			= ar9331_sw_setup,
 	.port_disable		= ar9331_sw_port_disable,
 	.phylink_get_caps	= ar9331_sw_phylink_get_caps,
-	.phylink_mac_config	= ar9331_sw_phylink_mac_config,
-	.phylink_mac_link_down	= ar9331_sw_phylink_mac_link_down,
-	.phylink_mac_link_up	= ar9331_sw_phylink_mac_link_up,
 	.get_stats64		= ar9331_get_stats64,
 	.get_pause_stats	= ar9331_get_pause_stats,
 };
@@ -1059,6 +1065,7 @@ static int ar9331_sw_probe(struct mdio_device *mdiodev)
 	ds->priv = priv;
 	priv->ops = ar9331_sw_ops;
 	ds->ops = &priv->ops;
+	ds->phylink_mac_ops = &ar9331_phylink_mac_ops;
 	dev_set_drvdata(&mdiodev->dev, priv);
 
 	for (i = 0; i < ARRAY_SIZE(priv->port); i++) {
diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
index dab66c0c6f64..b3c27cf538e8 100644
--- a/drivers/net/dsa/qca/qca8k-8xxx.c
+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
@@ -1283,11 +1283,13 @@ qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_inde
 }
 
 static struct phylink_pcs *
-qca8k_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
+qca8k_phylink_mac_select_pcs(struct phylink_config *config,
 			     phy_interface_t interface)
 {
-	struct qca8k_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct qca8k_priv *priv = dp->ds->priv;
 	struct phylink_pcs *pcs = NULL;
+	int port = dp->index;
 
 	switch (interface) {
 	case PHY_INTERFACE_MODE_SGMII:
@@ -1311,13 +1313,18 @@ qca8k_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
 }
 
 static void
-qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
+qca8k_phylink_mac_config(struct phylink_config *config, unsigned int mode,
 			 const struct phylink_link_state *state)
 {
-	struct qca8k_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct dsa_switch *ds = dp->ds;
+	struct qca8k_priv *priv;
+	int port = dp->index;
 	int cpu_port_index;
 	u32 reg;
 
+	priv = ds->priv;
+
 	switch (port) {
 	case 0: /* 1st CPU port */
 		if (state->interface != PHY_INTERFACE_MODE_RGMII &&
@@ -1426,20 +1433,24 @@ static void qca8k_phylink_get_caps(struct dsa_switch *ds, int port,
 }
 
 static void
-qca8k_phylink_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
+qca8k_phylink_mac_link_down(struct phylink_config *config, unsigned int mode,
 			    phy_interface_t interface)
 {
-	struct qca8k_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct qca8k_priv *priv = dp->ds->priv;
 
-	qca8k_port_set_status(priv, port, 0);
+	qca8k_port_set_status(priv, dp->index, 0);
 }
 
 static void
-qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
-			  phy_interface_t interface, struct phy_device *phydev,
-			  int speed, int duplex, bool tx_pause, bool rx_pause)
+qca8k_phylink_mac_link_up(struct phylink_config *config,
+			  struct phy_device *phydev, unsigned int mode,
+			  phy_interface_t interface, int speed, int duplex,
+			  bool tx_pause, bool rx_pause)
 {
-	struct qca8k_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct qca8k_priv *priv = dp->ds->priv;
+	int port = dp->index;
 	u32 reg;
 
 	if (phylink_autoneg_inband(mode)) {
@@ -1463,10 +1474,10 @@ qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
 		if (duplex == DUPLEX_FULL)
 			reg |= QCA8K_PORT_STATUS_DUPLEX;
 
-		if (rx_pause || dsa_is_cpu_port(ds, port))
+		if (rx_pause || dsa_port_is_cpu(dp))
 			reg |= QCA8K_PORT_STATUS_RXFLOW;
 
-		if (tx_pause || dsa_is_cpu_port(ds, port))
+		if (tx_pause || dsa_port_is_cpu(dp))
 			reg |= QCA8K_PORT_STATUS_TXFLOW;
 	}
 
@@ -1991,6 +2002,13 @@ qca8k_setup(struct dsa_switch *ds)
 	return 0;
 }
 
+static const struct phylink_mac_ops qca8k_phylink_mac_ops = {
+	.mac_select_pcs	= qca8k_phylink_mac_select_pcs,
+	.mac_config	= qca8k_phylink_mac_config,
+	.mac_link_down	= qca8k_phylink_mac_link_down,
+	.mac_link_up	= qca8k_phylink_mac_link_up,
+};
+
 static const struct dsa_switch_ops qca8k_switch_ops = {
 	.get_tag_protocol	= qca8k_get_tag_protocol,
 	.setup			= qca8k_setup,
@@ -2021,10 +2039,6 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
 	.port_vlan_add		= qca8k_port_vlan_add,
 	.port_vlan_del		= qca8k_port_vlan_del,
 	.phylink_get_caps	= qca8k_phylink_get_caps,
-	.phylink_mac_select_pcs	= qca8k_phylink_mac_select_pcs,
-	.phylink_mac_config	= qca8k_phylink_mac_config,
-	.phylink_mac_link_down	= qca8k_phylink_mac_link_down,
-	.phylink_mac_link_up	= qca8k_phylink_mac_link_up,
 	.get_phy_flags		= qca8k_get_phy_flags,
 	.port_lag_join		= qca8k_port_lag_join,
 	.port_lag_leave		= qca8k_port_lag_leave,
@@ -2091,6 +2105,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 	priv->ds->num_ports = QCA8K_NUM_PORTS;
 	priv->ds->priv = priv;
 	priv->ds->ops = &qca8k_switch_ops;
+	priv->ds->phylink_mac_ops = &qca8k_phylink_mac_ops;
 	mutex_init(&priv->reg_mutex);
 	dev_set_drvdata(&mdiodev->dev, priv);
 
diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h
index e0b1aa01337b..a1b2e0b529d5 100644
--- a/drivers/net/dsa/realtek/realtek.h
+++ b/drivers/net/dsa/realtek/realtek.h
@@ -17,6 +17,7 @@
 #define REALTEK_HW_STOP_DELAY		25	/* msecs */
 #define REALTEK_HW_START_DELAY		100	/* msecs */
 
+struct phylink_mac_ops;
 struct realtek_ops;
 struct dentry;
 struct inode;
@@ -117,6 +118,7 @@ struct realtek_ops {
 struct realtek_variant {
 	const struct dsa_switch_ops *ds_ops;
 	const struct realtek_ops *ops;
+	const struct phylink_mac_ops *phylink_mac_ops;
 	unsigned int clk_delay;
 	u8 cmd_read;
 	u8 cmd_write;
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index 12665a8a3412..b9674f68b756 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -1048,11 +1048,13 @@ static void rtl8365mb_phylink_get_caps(struct dsa_switch *ds, int port,
 		phy_interface_set_rgmii(config->supported_interfaces);
 }
 
-static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port,
+static void rtl8365mb_phylink_mac_config(struct phylink_config *config,
 					 unsigned int mode,
 					 const struct phylink_link_state *state)
 {
-	struct realtek_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct realtek_priv *priv = dp->ds->priv;
+	u8 port = dp->index;
 	int ret;
 
 	if (mode != MLO_AN_PHY && mode != MLO_AN_FIXED) {
@@ -1076,13 +1078,15 @@ static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port,
 	 */
 }
 
-static void rtl8365mb_phylink_mac_link_down(struct dsa_switch *ds, int port,
+static void rtl8365mb_phylink_mac_link_down(struct phylink_config *config,
 					    unsigned int mode,
 					    phy_interface_t interface)
 {
-	struct realtek_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct realtek_priv *priv = dp->ds->priv;
 	struct rtl8365mb_port *p;
 	struct rtl8365mb *mb;
+	u8 port = dp->index;
 	int ret;
 
 	mb = priv->chip_data;
@@ -1101,16 +1105,18 @@ static void rtl8365mb_phylink_mac_link_down(struct dsa_switch *ds, int port,
 	}
 }
 
-static void rtl8365mb_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void rtl8365mb_phylink_mac_link_up(struct phylink_config *config,
+					  struct phy_device *phydev,
 					  unsigned int mode,
 					  phy_interface_t interface,
-					  struct phy_device *phydev, int speed,
-					  int duplex, bool tx_pause,
+					  int speed, int duplex, bool tx_pause,
 					  bool rx_pause)
 {
-	struct realtek_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct realtek_priv *priv = dp->ds->priv;
 	struct rtl8365mb_port *p;
 	struct rtl8365mb *mb;
+	u8 port = dp->index;
 	int ret;
 
 	mb = priv->chip_data;
@@ -2106,15 +2112,18 @@ static int rtl8365mb_detect(struct realtek_priv *priv)
 	return 0;
 }
 
+static const struct phylink_mac_ops rtl8365mb_phylink_mac_ops = {
+	.mac_config = rtl8365mb_phylink_mac_config,
+	.mac_link_down = rtl8365mb_phylink_mac_link_down,
+	.mac_link_up = rtl8365mb_phylink_mac_link_up,
+};
+
 static const struct dsa_switch_ops rtl8365mb_switch_ops = {
 	.get_tag_protocol = rtl8365mb_get_tag_protocol,
 	.change_tag_protocol = rtl8365mb_change_tag_protocol,
 	.setup = rtl8365mb_setup,
 	.teardown = rtl8365mb_teardown,
 	.phylink_get_caps = rtl8365mb_phylink_get_caps,
-	.phylink_mac_config = rtl8365mb_phylink_mac_config,
-	.phylink_mac_link_down = rtl8365mb_phylink_mac_link_down,
-	.phylink_mac_link_up = rtl8365mb_phylink_mac_link_up,
 	.port_stp_state_set = rtl8365mb_port_stp_state_set,
 	.get_strings = rtl8365mb_get_strings,
 	.get_ethtool_stats = rtl8365mb_get_ethtool_stats,
@@ -2136,6 +2145,7 @@ static const struct realtek_ops rtl8365mb_ops = {
 const struct realtek_variant rtl8365mb_variant = {
 	.ds_ops = &rtl8365mb_switch_ops,
 	.ops = &rtl8365mb_ops,
+	.phylink_mac_ops = &rtl8365mb_phylink_mac_ops,
 	.clk_delay = 10,
 	.cmd_read = 0xb9,
 	.cmd_write = 0xb8,
diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
index e10ae94cf771..9e821b42e5f3 100644
--- a/drivers/net/dsa/realtek/rtl8366rb.c
+++ b/drivers/net/dsa/realtek/rtl8366rb.c
@@ -176,6 +176,7 @@
 #define RTL8366RB_VLAN_INGRESS_CTRL2_REG	0x037f
 
 /* LED control registers */
+/* The LED blink rate is global; it is used by all triggers in all groups. */
 #define RTL8366RB_LED_BLINKRATE_REG		0x0430
 #define RTL8366RB_LED_BLINKRATE_MASK		0x0007
 #define RTL8366RB_LED_BLINKRATE_28MS		0x0000
@@ -185,27 +186,27 @@
 #define RTL8366RB_LED_BLINKRATE_222MS		0x0004
 #define RTL8366RB_LED_BLINKRATE_446MS		0x0005
 
+/* LED trigger event for each group */
 #define RTL8366RB_LED_CTRL_REG			0x0431
-#define RTL8366RB_LED_OFF			0x0
-#define RTL8366RB_LED_DUP_COL			0x1
-#define RTL8366RB_LED_LINK_ACT			0x2
-#define RTL8366RB_LED_SPD1000			0x3
-#define RTL8366RB_LED_SPD100			0x4
-#define RTL8366RB_LED_SPD10			0x5
-#define RTL8366RB_LED_SPD1000_ACT		0x6
-#define RTL8366RB_LED_SPD100_ACT		0x7
-#define RTL8366RB_LED_SPD10_ACT			0x8
-#define RTL8366RB_LED_SPD100_10_ACT		0x9
-#define RTL8366RB_LED_FIBER			0xa
-#define RTL8366RB_LED_AN_FAULT			0xb
-#define RTL8366RB_LED_LINK_RX			0xc
-#define RTL8366RB_LED_LINK_TX			0xd
-#define RTL8366RB_LED_MASTER			0xe
-#define RTL8366RB_LED_FORCE			0xf
+#define RTL8366RB_LED_CTRL_OFFSET(led_group)	\
+	(4 * (led_group))
+#define RTL8366RB_LED_CTRL_MASK(led_group)	\
+	(0xf << RTL8366RB_LED_CTRL_OFFSET(led_group))
+
+/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only
+ * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is
+ * RTL8366RB_LEDGROUP_FORCE. Otherwise, it is ignored.
+ */
 #define RTL8366RB_LED_0_1_CTRL_REG		0x0432
-#define RTL8366RB_LED_1_OFFSET			6
 #define RTL8366RB_LED_2_3_CTRL_REG		0x0433
-#define RTL8366RB_LED_3_OFFSET			6
+#define RTL8366RB_LED_X_X_CTRL_REG(led_group)	\
+	((led_group) <= 1 ? \
+		RTL8366RB_LED_0_1_CTRL_REG : \
+		RTL8366RB_LED_2_3_CTRL_REG)
+#define RTL8366RB_LED_0_X_CTRL_MASK		GENMASK(5, 0)
+#define RTL8366RB_LED_X_1_CTRL_MASK		GENMASK(11, 6)
+#define RTL8366RB_LED_2_X_CTRL_MASK		GENMASK(5, 0)
+#define RTL8366RB_LED_X_3_CTRL_MASK		GENMASK(11, 6)
 
 #define RTL8366RB_MIB_COUNT			33
 #define RTL8366RB_GLOBAL_MIB_COUNT		1
@@ -349,14 +350,44 @@
 #define RTL8366RB_GREEN_FEATURE_TX	BIT(0)
 #define RTL8366RB_GREEN_FEATURE_RX	BIT(2)
 
+enum rtl8366_ledgroup_mode {
+	RTL8366RB_LEDGROUP_OFF			= 0x0,
+	RTL8366RB_LEDGROUP_DUP_COL		= 0x1,
+	RTL8366RB_LEDGROUP_LINK_ACT		= 0x2,
+	RTL8366RB_LEDGROUP_SPD1000		= 0x3,
+	RTL8366RB_LEDGROUP_SPD100		= 0x4,
+	RTL8366RB_LEDGROUP_SPD10		= 0x5,
+	RTL8366RB_LEDGROUP_SPD1000_ACT		= 0x6,
+	RTL8366RB_LEDGROUP_SPD100_ACT		= 0x7,
+	RTL8366RB_LEDGROUP_SPD10_ACT		= 0x8,
+	RTL8366RB_LEDGROUP_SPD100_10_ACT	= 0x9,
+	RTL8366RB_LEDGROUP_FIBER		= 0xa,
+	RTL8366RB_LEDGROUP_AN_FAULT		= 0xb,
+	RTL8366RB_LEDGROUP_LINK_RX		= 0xc,
+	RTL8366RB_LEDGROUP_LINK_TX		= 0xd,
+	RTL8366RB_LEDGROUP_MASTER		= 0xe,
+	RTL8366RB_LEDGROUP_FORCE		= 0xf,
+
+	__RTL8366RB_LEDGROUP_MODE_MAX
+};
+
+struct rtl8366rb_led {
+	u8 port_num;
+	u8 led_group;
+	struct realtek_priv *priv;
+	struct led_classdev cdev;
+};
+
 /**
  * struct rtl8366rb - RTL8366RB-specific data
  * @max_mtu: per-port max MTU setting
  * @pvid_enabled: if PVID is set for respective port
+ * @leds: per-port and per-ledgroup led info
  */
 struct rtl8366rb {
 	unsigned int max_mtu[RTL8366RB_NUM_PORTS];
 	bool pvid_enabled[RTL8366RB_NUM_PORTS];
+	struct rtl8366rb_led leds[RTL8366RB_NUM_PORTS][RTL8366RB_NUM_LEDGROUPS];
 };
 
 static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
@@ -799,6 +830,217 @@ static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table,
 	return 0;
 }
 
+static int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv,
+				      u8 led_group,
+				      enum rtl8366_ledgroup_mode mode)
+{
+	int ret;
+	u32 val;
+
+	val = mode << RTL8366RB_LED_CTRL_OFFSET(led_group);
+
+	ret = regmap_update_bits(priv->map,
+				 RTL8366RB_LED_CTRL_REG,
+				 RTL8366RB_LED_CTRL_MASK(led_group),
+				 val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static inline u32 rtl8366rb_led_group_port_mask(u8 led_group, u8 port)
+{
+	switch (led_group) {
+	case 0:
+		return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+	case 1:
+		return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+	case 2:
+		return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+	case 3:
+		return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+	default:
+		return 0;
+	}
+}
+
+static int rb8366rb_get_port_led(struct rtl8366rb_led *led)
+{
+	struct realtek_priv *priv = led->priv;
+	u8 led_group = led->led_group;
+	u8 port_num = led->port_num;
+	int ret;
+	u32 val;
+
+	ret = regmap_read(priv->map, RTL8366RB_LED_X_X_CTRL_REG(led_group),
+			  &val);
+	if (ret) {
+		dev_err(priv->dev, "error reading LED on port %d group %d\n",
+			led_group, port_num);
+		return ret;
+	}
+
+	return !!(val & rtl8366rb_led_group_port_mask(led_group, port_num));
+}
+
+static int rb8366rb_set_port_led(struct rtl8366rb_led *led, bool enable)
+{
+	struct realtek_priv *priv = led->priv;
+	u8 led_group = led->led_group;
+	u8 port_num = led->port_num;
+	int ret;
+
+	ret = regmap_update_bits(priv->map,
+				 RTL8366RB_LED_X_X_CTRL_REG(led_group),
+				 rtl8366rb_led_group_port_mask(led_group,
+							       port_num),
+				 enable ? 0xffff : 0);
+	if (ret) {
+		dev_err(priv->dev, "error updating LED on port %d group %d\n",
+			led_group, port_num);
+		return ret;
+	}
+
+	/* Change the LED group to manual controlled LEDs if required */
+	ret = rb8366rb_set_ledgroup_mode(priv, led_group,
+					 RTL8366RB_LEDGROUP_FORCE);
+
+	if (ret) {
+		dev_err(priv->dev, "error updating LED GROUP group %d\n",
+			led_group);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int
+rtl8366rb_cled_brightness_set_blocking(struct led_classdev *ldev,
+				       enum led_brightness brightness)
+{
+	struct rtl8366rb_led *led = container_of(ldev, struct rtl8366rb_led,
+						 cdev);
+
+	return rb8366rb_set_port_led(led, brightness == LED_ON);
+}
+
+static int rtl8366rb_setup_led(struct realtek_priv *priv, struct dsa_port *dp,
+			       struct fwnode_handle *led_fwnode)
+{
+	struct rtl8366rb *rb = priv->chip_data;
+	struct led_init_data init_data = { };
+	enum led_default_state state;
+	struct rtl8366rb_led *led;
+	u32 led_group;
+	int ret;
+
+	ret = fwnode_property_read_u32(led_fwnode, "reg", &led_group);
+	if (ret)
+		return ret;
+
+	if (led_group >= RTL8366RB_NUM_LEDGROUPS) {
+		dev_warn(priv->dev, "Invalid LED reg %d defined for port %d",
+			 led_group, dp->index);
+		return -EINVAL;
+	}
+
+	led = &rb->leds[dp->index][led_group];
+	led->port_num = dp->index;
+	led->led_group = led_group;
+	led->priv = priv;
+
+	state = led_init_default_state_get(led_fwnode);
+	switch (state) {
+	case LEDS_DEFSTATE_ON:
+		led->cdev.brightness = 1;
+		rb8366rb_set_port_led(led, 1);
+		break;
+	case LEDS_DEFSTATE_KEEP:
+		led->cdev.brightness =
+			rb8366rb_get_port_led(led);
+		break;
+	case LEDS_DEFSTATE_OFF:
+	default:
+		led->cdev.brightness = 0;
+		rb8366rb_set_port_led(led, 0);
+	}
+
+	led->cdev.max_brightness = 1;
+	led->cdev.brightness_set_blocking =
+		rtl8366rb_cled_brightness_set_blocking;
+	init_data.fwnode = led_fwnode;
+	init_data.devname_mandatory = true;
+
+	init_data.devicename = kasprintf(GFP_KERNEL, "Realtek-%d:0%d:%d",
+					 dp->ds->index, dp->index, led_group);
+	if (!init_data.devicename)
+		return -ENOMEM;
+
+	ret = devm_led_classdev_register_ext(priv->dev, &led->cdev, &init_data);
+	if (ret) {
+		dev_warn(priv->dev, "Failed to init LED %d for port %d",
+			 led_group, dp->index);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rtl8366rb_setup_all_leds_off(struct realtek_priv *priv)
+{
+	int ret = 0;
+	int i;
+
+	regmap_update_bits(priv->map,
+			   RTL8366RB_INTERRUPT_CONTROL_REG,
+			   RTL8366RB_P4_RGMII_LED,
+			   0);
+
+	for (i = 0; i < RTL8366RB_NUM_LEDGROUPS; i++) {
+		ret = rb8366rb_set_ledgroup_mode(priv, i,
+						 RTL8366RB_LEDGROUP_OFF);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static int rtl8366rb_setup_leds(struct realtek_priv *priv)
+{
+	struct device_node *leds_np, *led_np;
+	struct dsa_switch *ds = &priv->ds;
+	struct dsa_port *dp;
+	int ret = 0;
+
+	dsa_switch_for_each_port(dp, ds) {
+		if (!dp->dn)
+			continue;
+
+		leds_np = of_get_child_by_name(dp->dn, "leds");
+		if (!leds_np) {
+			dev_dbg(priv->dev, "No leds defined for port %d",
+				dp->index);
+			continue;
+		}
+
+		for_each_child_of_node(leds_np, led_np) {
+			ret = rtl8366rb_setup_led(priv, dp,
+						  of_fwnode_handle(led_np));
+			if (ret) {
+				of_node_put(led_np);
+				break;
+			}
+		}
+
+		of_node_put(leds_np);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
 static int rtl8366rb_setup(struct dsa_switch *ds)
 {
 	struct realtek_priv *priv = ds->priv;
@@ -807,7 +1049,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 	u32 chip_ver = 0;
 	u32 chip_id = 0;
 	int jam_size;
-	u32 val;
 	int ret;
 	int i;
 
@@ -987,7 +1228,9 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
-	/* Set blinking, TODO: make this configurable */
+	/* Set blinking, used by all LED groups using HW triggers.
+	 * TODO: make this configurable
+	 */
 	ret = regmap_update_bits(priv->map, RTL8366RB_LED_BLINKRATE_REG,
 				 RTL8366RB_LED_BLINKRATE_MASK,
 				 RTL8366RB_LED_BLINKRATE_56MS);
@@ -995,32 +1238,17 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 		return ret;
 
 	/* Set up LED activity:
-	 * Each port has 4 LEDs, we configure all ports to the same
-	 * behaviour (no individual config) but we can set up each
-	 * LED separately.
+	 * Each port has 4 LEDs on fixed groups. Each group shares the same
+	 * hardware trigger across all ports. LEDs can only be indiviually
+	 * controlled setting the LED group to fixed mode and using the driver
+	 * to toggle them LEDs on/off.
 	 */
 	if (priv->leds_disabled) {
-		/* Turn everything off */
-		regmap_update_bits(priv->map,
-				   RTL8366RB_LED_0_1_CTRL_REG,
-				   0x0FFF, 0);
-		regmap_update_bits(priv->map,
-				   RTL8366RB_LED_2_3_CTRL_REG,
-				   0x0FFF, 0);
-		regmap_update_bits(priv->map,
-				   RTL8366RB_INTERRUPT_CONTROL_REG,
-				   RTL8366RB_P4_RGMII_LED,
-				   0);
-		val = RTL8366RB_LED_OFF;
+		ret = rtl8366rb_setup_all_leds_off(priv);
+		if (ret)
+			return ret;
 	} else {
-		/* TODO: make this configurable per LED */
-		val = RTL8366RB_LED_FORCE;
-	}
-	for (i = 0; i < 4; i++) {
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_LED_CTRL_REG,
-					 0xf << (i * 4),
-					 val << (i * 4));
+		ret = rtl8366rb_setup_leds(priv);
 		if (ret)
 			return ret;
 	}
@@ -1077,11 +1305,19 @@ static void rtl8366rb_phylink_get_caps(struct dsa_switch *ds, int port,
 }
 
 static void
-rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
-		      phy_interface_t interface, struct phy_device *phydev,
+rtl8366rb_mac_config(struct phylink_config *config, unsigned int mode,
+		     const struct phylink_link_state *state)
+{
+}
+
+static void
+rtl8366rb_mac_link_up(struct phylink_config *config, struct phy_device *phydev,
+		      unsigned int mode, phy_interface_t interface,
 		      int speed, int duplex, bool tx_pause, bool rx_pause)
 {
-	struct realtek_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct realtek_priv *priv = dp->ds->priv;
+	int port = dp->index;
 	unsigned int val;
 	int ret;
 
@@ -1147,10 +1383,12 @@ rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
 }
 
 static void
-rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
+rtl8366rb_mac_link_down(struct phylink_config *config, unsigned int mode,
 			phy_interface_t interface)
 {
-	struct realtek_priv *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct realtek_priv *priv = dp->ds->priv;
+	int port = dp->index;
 	int ret;
 
 	if (port != priv->cpu_port)
@@ -1167,52 +1405,6 @@ rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
 	}
 }
 
-static void rb8366rb_set_port_led(struct realtek_priv *priv,
-				  int port, bool enable)
-{
-	u16 val = enable ? 0x3f : 0;
-	int ret;
-
-	if (priv->leds_disabled)
-		return;
-
-	switch (port) {
-	case 0:
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_LED_0_1_CTRL_REG,
-					 0x3F, val);
-		break;
-	case 1:
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_LED_0_1_CTRL_REG,
-					 0x3F << RTL8366RB_LED_1_OFFSET,
-					 val << RTL8366RB_LED_1_OFFSET);
-		break;
-	case 2:
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_LED_2_3_CTRL_REG,
-					 0x3F, val);
-		break;
-	case 3:
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_LED_2_3_CTRL_REG,
-					 0x3F << RTL8366RB_LED_3_OFFSET,
-					 val << RTL8366RB_LED_3_OFFSET);
-		break;
-	case 4:
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_INTERRUPT_CONTROL_REG,
-					 RTL8366RB_P4_RGMII_LED,
-					 enable ? RTL8366RB_P4_RGMII_LED : 0);
-		break;
-	default:
-		dev_err(priv->dev, "no LED for port %d\n", port);
-		return;
-	}
-	if (ret)
-		dev_err(priv->dev, "error updating LED on port %d\n", port);
-}
-
 static int
 rtl8366rb_port_enable(struct dsa_switch *ds, int port,
 		      struct phy_device *phy)
@@ -1226,7 +1418,6 @@ rtl8366rb_port_enable(struct dsa_switch *ds, int port,
 	if (ret)
 		return ret;
 
-	rb8366rb_set_port_led(priv, port, true);
 	return 0;
 }
 
@@ -1241,8 +1432,6 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port)
 				 BIT(port));
 	if (ret)
 		return;
-
-	rb8366rb_set_port_led(priv, port, false);
 }
 
 static int
@@ -1849,12 +2038,16 @@ static int rtl8366rb_detect(struct realtek_priv *priv)
 	return 0;
 }
 
+static const struct phylink_mac_ops rtl8366rb_phylink_mac_ops = {
+	.mac_config = rtl8366rb_mac_config,
+	.mac_link_down = rtl8366rb_mac_link_down,
+	.mac_link_up = rtl8366rb_mac_link_up,
+};
+
 static const struct dsa_switch_ops rtl8366rb_switch_ops = {
 	.get_tag_protocol = rtl8366_get_tag_protocol,
 	.setup = rtl8366rb_setup,
 	.phylink_get_caps = rtl8366rb_phylink_get_caps,
-	.phylink_mac_link_up = rtl8366rb_mac_link_up,
-	.phylink_mac_link_down = rtl8366rb_mac_link_down,
 	.get_strings = rtl8366_get_strings,
 	.get_ethtool_stats = rtl8366_get_ethtool_stats,
 	.get_sset_count = rtl8366_get_sset_count,
@@ -1892,6 +2085,7 @@ static const struct realtek_ops rtl8366rb_ops = {
 const struct realtek_variant rtl8366rb_variant = {
 	.ds_ops = &rtl8366rb_switch_ops,
 	.ops = &rtl8366rb_ops,
+	.phylink_mac_ops = &rtl8366rb_phylink_mac_ops,
 	.clk_delay = 10,
 	.cmd_read = 0xa9,
 	.cmd_write = 0xa8,
diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c
index d2e876805393..35709a1756ae 100644
--- a/drivers/net/dsa/realtek/rtl83xx.c
+++ b/drivers/net/dsa/realtek/rtl83xx.c
@@ -236,6 +236,7 @@ int rtl83xx_register_switch(struct realtek_priv *priv)
 	ds->priv = priv;
 	ds->dev = priv->dev;
 	ds->ops = priv->variant->ds_ops;
+	ds->phylink_mac_ops = priv->variant->phylink_mac_ops;
 	ds->num_ports = priv->num_ports;
 
 	ret = dsa_register_switch(ds);
@@ -290,16 +291,13 @@ EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, REALTEK_DSA);
  * rtl83xx_remove() - Cleanup a realtek switch driver
  * @priv: realtek_priv pointer
  *
- * If a method is provided, this function asserts the hard reset of the switch
- * in order to avoid leaking traffic when the driver is gone.
+ * Placehold for common cleanup procedures.
  *
- * Context: Might sleep if priv->gdev->chip->can_sleep.
+ * Context: Any
  * Return: nothing
  */
 void rtl83xx_remove(struct realtek_priv *priv)
 {
-	/* leave the device reset asserted */
-	rtl83xx_reset_assert(priv);
 }
 EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, REALTEK_DSA);
 
diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
index 10092ea85e46..92e032972b34 100644
--- a/drivers/net/dsa/rzn1_a5psw.c
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -239,23 +239,31 @@ static void a5psw_phylink_get_caps(struct dsa_switch *ds, int port,
 }
 
 static struct phylink_pcs *
-a5psw_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
+a5psw_phylink_mac_select_pcs(struct phylink_config *config,
 			     phy_interface_t interface)
 {
-	struct dsa_port *dp = dsa_to_port(ds, port);
-	struct a5psw *a5psw = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct a5psw *a5psw = dp->ds->priv;
 
-	if (!dsa_port_is_cpu(dp) && a5psw->pcs[port])
-		return a5psw->pcs[port];
+	if (dsa_port_is_cpu(dp))
+		return NULL;
 
-	return NULL;
+	return a5psw->pcs[dp->index];
+}
+
+static void a5psw_phylink_mac_config(struct phylink_config *config,
+				     unsigned int mode,
+				     const struct phylink_link_state *state)
+{
 }
 
-static void a5psw_phylink_mac_link_down(struct dsa_switch *ds, int port,
+static void a5psw_phylink_mac_link_down(struct phylink_config *config,
 					unsigned int mode,
 					phy_interface_t interface)
 {
-	struct a5psw *a5psw = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct a5psw *a5psw = dp->ds->priv;
+	int port = dp->index;
 	u32 cmd_cfg;
 
 	cmd_cfg = a5psw_reg_readl(a5psw, A5PSW_CMD_CFG(port));
@@ -263,15 +271,17 @@ static void a5psw_phylink_mac_link_down(struct dsa_switch *ds, int port,
 	a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port), cmd_cfg);
 }
 
-static void a5psw_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void a5psw_phylink_mac_link_up(struct phylink_config *config,
+				      struct phy_device *phydev,
 				      unsigned int mode,
 				      phy_interface_t interface,
-				      struct phy_device *phydev, int speed,
-				      int duplex, bool tx_pause, bool rx_pause)
+				      int speed, int duplex, bool tx_pause,
+				      bool rx_pause)
 {
 	u32 cmd_cfg = A5PSW_CMD_CFG_RX_ENA | A5PSW_CMD_CFG_TX_ENA |
 		      A5PSW_CMD_CFG_TX_CRC_APPEND;
-	struct a5psw *a5psw = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct a5psw *a5psw = dp->ds->priv;
 
 	if (speed == SPEED_1000)
 		cmd_cfg |= A5PSW_CMD_CFG_ETH_SPEED;
@@ -284,7 +294,7 @@ static void a5psw_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	if (!rx_pause)
 		cmd_cfg &= ~A5PSW_CMD_CFG_PAUSE_IGNORE;
 
-	a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port), cmd_cfg);
+	a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(dp->index), cmd_cfg);
 }
 
 static int a5psw_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
@@ -992,15 +1002,19 @@ static int a5psw_setup(struct dsa_switch *ds)
 	return 0;
 }
 
+static const struct phylink_mac_ops a5psw_phylink_mac_ops = {
+	.mac_select_pcs = a5psw_phylink_mac_select_pcs,
+	.mac_config = a5psw_phylink_mac_config,
+	.mac_link_down = a5psw_phylink_mac_link_down,
+	.mac_link_up = a5psw_phylink_mac_link_up,
+};
+
 static const struct dsa_switch_ops a5psw_switch_ops = {
 	.get_tag_protocol = a5psw_get_tag_protocol,
 	.setup = a5psw_setup,
 	.port_disable = a5psw_port_disable,
 	.port_enable = a5psw_port_enable,
 	.phylink_get_caps = a5psw_phylink_get_caps,
-	.phylink_mac_select_pcs = a5psw_phylink_mac_select_pcs,
-	.phylink_mac_link_down = a5psw_phylink_mac_link_down,
-	.phylink_mac_link_up = a5psw_phylink_mac_link_up,
 	.port_change_mtu = a5psw_port_change_mtu,
 	.port_max_mtu = a5psw_port_max_mtu,
 	.get_sset_count = a5psw_get_sset_count,
@@ -1252,6 +1266,7 @@ static int a5psw_probe(struct platform_device *pdev)
 	ds->dev = dev;
 	ds->num_ports = A5PSW_PORTS_NUM;
 	ds->ops = &a5psw_switch_ops;
+	ds->phylink_mac_ops = &a5psw_phylink_mac_ops;
 	ds->priv = a5psw;
 
 	ret = dsa_register_switch(ds);
diff --git a/drivers/net/dsa/sja1105/sja1105_flower.c b/drivers/net/dsa/sja1105/sja1105_flower.c
index 9e8ca182c722..05d8ed3121e7 100644
--- a/drivers/net/dsa/sja1105/sja1105_flower.c
+++ b/drivers/net/dsa/sja1105/sja1105_flower.c
@@ -214,6 +214,9 @@ static int sja1105_flower_parse_key(struct sja1105_private *priv,
 		return -EOPNOTSUPP;
 	}
 
+	if (flow_rule_match_has_control_flags(rule, extack))
+		return -EOPNOTSUPP;
+
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) {
 		struct flow_match_basic match;
 
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 6646f7fb0f90..ee0fb1c343f1 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1358,10 +1358,11 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
 }
 
 static struct phylink_pcs *
-sja1105_mac_select_pcs(struct dsa_switch *ds, int port, phy_interface_t iface)
+sja1105_mac_select_pcs(struct phylink_config *config, phy_interface_t iface)
 {
-	struct sja1105_private *priv = ds->priv;
-	struct dw_xpcs *xpcs = priv->xpcs[port];
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct sja1105_private *priv = dp->ds->priv;
+	struct dw_xpcs *xpcs = priv->xpcs[dp->index];
 
 	if (xpcs)
 		return &xpcs->pcs;
@@ -1369,21 +1370,31 @@ sja1105_mac_select_pcs(struct dsa_switch *ds, int port, phy_interface_t iface)
 	return NULL;
 }
 
-static void sja1105_mac_link_down(struct dsa_switch *ds, int port,
+static void sja1105_mac_config(struct phylink_config *config,
+			       unsigned int mode,
+			       const struct phylink_link_state *state)
+{
+}
+
+static void sja1105_mac_link_down(struct phylink_config *config,
 				  unsigned int mode,
 				  phy_interface_t interface)
 {
-	sja1105_inhibit_tx(ds->priv, BIT(port), true);
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+
+	sja1105_inhibit_tx(dp->ds->priv, BIT(dp->index), true);
 }
 
-static void sja1105_mac_link_up(struct dsa_switch *ds, int port,
+static void sja1105_mac_link_up(struct phylink_config *config,
+				struct phy_device *phydev,
 				unsigned int mode,
 				phy_interface_t interface,
-				struct phy_device *phydev,
 				int speed, int duplex,
 				bool tx_pause, bool rx_pause)
 {
-	struct sja1105_private *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct sja1105_private *priv = dp->ds->priv;
+	int port = dp->index;
 
 	sja1105_adjust_port_config(priv, port, speed);
 
@@ -3198,6 +3209,13 @@ static void sja1105_teardown(struct dsa_switch *ds)
 	sja1105_static_config_free(&priv->static_config);
 }
 
+static const struct phylink_mac_ops sja1105_phylink_mac_ops = {
+	.mac_select_pcs	= sja1105_mac_select_pcs,
+	.mac_config	= sja1105_mac_config,
+	.mac_link_up	= sja1105_mac_link_up,
+	.mac_link_down	= sja1105_mac_link_down,
+};
+
 static const struct dsa_switch_ops sja1105_switch_ops = {
 	.get_tag_protocol	= sja1105_get_tag_protocol,
 	.connect_tag_protocol	= sja1105_connect_tag_protocol,
@@ -3207,9 +3225,6 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
 	.port_change_mtu	= sja1105_change_mtu,
 	.port_max_mtu		= sja1105_get_max_mtu,
 	.phylink_get_caps	= sja1105_phylink_get_caps,
-	.phylink_mac_select_pcs	= sja1105_mac_select_pcs,
-	.phylink_mac_link_up	= sja1105_mac_link_up,
-	.phylink_mac_link_down	= sja1105_mac_link_down,
 	.get_strings		= sja1105_get_strings,
 	.get_ethtool_stats	= sja1105_get_ethtool_stats,
 	.get_sset_count		= sja1105_get_sset_count,
@@ -3375,6 +3390,7 @@ static int sja1105_probe(struct spi_device *spi)
 	ds->dev = dev;
 	ds->num_ports = priv->info->num_ports;
 	ds->ops = &sja1105_switch_ops;
+	ds->phylink_mac_ops = &sja1105_phylink_mac_ops;
 	ds->priv = priv;
 	priv->ds = ds;
 
@@ -3456,7 +3472,6 @@ MODULE_DEVICE_TABLE(spi, sja1105_spi_ids);
 static struct spi_driver sja1105_driver = {
 	.driver = {
 		.name  = "sja1105",
-		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(sja1105_dt_ids),
 	},
 	.id_table = sja1105_spi_ids,
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index ae70eac3be28..4b031fefcec6 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/iopoll.h>
 #include <linux/of.h>
 #include <linux/of_mdio.h>
 #include <linux/bitops.h>
@@ -268,6 +269,9 @@
 #define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398)
 #define IS_739X(a) (IS_7395(a) || IS_7398(a))
 
+#define VSC73XX_POLL_SLEEP_US		1000
+#define VSC73XX_POLL_TIMEOUT_US		10000
+
 struct vsc73xx_counter {
 	u8 counter;
 	const char *name;
@@ -713,51 +717,44 @@ static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
 		      port, VSC73XX_C_RX0, 0);
 }
 
-static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc,
-				       int port, struct phy_device *phydev,
-				       u32 initval)
+static void vsc73xx_reset_port(struct vsc73xx *vsc, int port, u32 initval)
 {
-	u32 val = initval;
-	u8 seed;
-
-	/* Reset this port FIXME: break out subroutine */
-	val |= VSC73XX_MAC_CFG_RESET;
-	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
-
-	/* Seed the port randomness with randomness */
-	get_random_bytes(&seed, 1);
-	val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
-	val |= VSC73XX_MAC_CFG_SEED_LOAD;
-	val |= VSC73XX_MAC_CFG_WEXC_DIS;
-	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
+	int ret, err;
+	u32 val;
 
-	/* Flow control for the PHY facing ports:
-	 * Use a zero delay pause frame when pause condition is left
-	 * Obey pause control frames
-	 * When generating pause frames, use 0xff as pause value
-	 */
-	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
-		      VSC73XX_FCCONF_ZERO_PAUSE_EN |
-		      VSC73XX_FCCONF_FLOW_CTRL_OBEY |
-		      0xff);
+	/* Disable RX on this port */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+			    VSC73XX_MAC_CFG,
+			    VSC73XX_MAC_CFG_RX_EN, 0);
 
-	/* Disallow backward dropping of frames from this port */
+	/* Discard packets */
 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
-			    VSC73XX_SBACKWDROP, BIT(port), 0);
+			    VSC73XX_ARBDISC, BIT(port), BIT(port));
+
+	/* Wait until queue is empty */
+	ret = read_poll_timeout(vsc73xx_read, err,
+				err < 0 || (val & BIT(port)),
+				VSC73XX_POLL_SLEEP_US,
+				VSC73XX_POLL_TIMEOUT_US, false,
+				vsc, VSC73XX_BLOCK_ARBITER, 0,
+				VSC73XX_ARBEMPTY, &val);
+	if (ret)
+		dev_err(vsc->dev,
+			"timeout waiting for block arbiter\n");
+	else if (err < 0)
+		dev_err(vsc->dev, "error reading arbiter\n");
 
-	/* Enable TX, RX, deassert reset, stop loading seed */
-	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
-			    VSC73XX_MAC_CFG,
-			    VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
-			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
-			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
+	/* Put this port into reset */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
+		      VSC73XX_MAC_CFG_RESET | initval);
 }
 
-static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
-				struct phy_device *phydev)
+static void vsc73xx_mac_config(struct phylink_config *config, unsigned int mode,
+			       const struct phylink_link_state *state)
 {
-	struct vsc73xx *vsc = ds->priv;
-	u32 val;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct vsc73xx *vsc = dp->ds->priv;
+	int port = dp->index;
 
 	/* Special handling of the CPU-facing port */
 	if (port == CPU_PORT) {
@@ -774,104 +771,93 @@ static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
 			      VSC73XX_ADVPORTM_ENA_GTX |
 			      VSC73XX_ADVPORTM_DDR_MODE);
 	}
+}
+
+static void vsc73xx_mac_link_down(struct phylink_config *config,
+				  unsigned int mode, phy_interface_t interface)
+{
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct vsc73xx *vsc = dp->ds->priv;
+	int port = dp->index;
 
-	/* This is the MAC confiuration that always need to happen
-	 * after a PHY or the CPU port comes up or down.
+	/* This routine is described in the datasheet (below ARBDISC register
+	 * description)
 	 */
-	if (!phydev->link) {
-		int maxloop = 10;
-
-		dev_dbg(vsc->dev, "port %d: went down\n",
-			port);
-
-		/* Disable RX on this port */
-		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
-				    VSC73XX_MAC_CFG,
-				    VSC73XX_MAC_CFG_RX_EN, 0);
-
-		/* Discard packets */
-		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
-				    VSC73XX_ARBDISC, BIT(port), BIT(port));
-
-		/* Wait until queue is empty */
-		vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
-			     VSC73XX_ARBEMPTY, &val);
-		while (!(val & BIT(port))) {
-			msleep(1);
-			vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0,
-				     VSC73XX_ARBEMPTY, &val);
-			if (--maxloop == 0) {
-				dev_err(vsc->dev,
-					"timeout waiting for block arbiter\n");
-				/* Continue anyway */
-				break;
-			}
-		}
+	vsc73xx_reset_port(vsc, port, 0);
+
+	/* Allow backward dropping of frames from this port */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+			    VSC73XX_SBACKWDROP, BIT(port), BIT(port));
+
+	/* Receive mask (disable forwarding) */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+			    VSC73XX_RECVMASK, BIT(port), 0);
+}
+
+static void vsc73xx_mac_link_up(struct phylink_config *config,
+				struct phy_device *phy, unsigned int mode,
+				phy_interface_t interface, int speed,
+				int duplex, bool tx_pause, bool rx_pause)
+{
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct vsc73xx *vsc = dp->ds->priv;
+	int port = dp->index;
+	u32 val;
+	u8 seed;
 
-		/* Put this port into reset */
-		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
-			      VSC73XX_MAC_CFG_RESET);
+	if (speed == SPEED_1000)
+		val = VSC73XX_MAC_CFG_GIGA_MODE | VSC73XX_MAC_CFG_TX_IPG_1000M;
+	else
+		val = VSC73XX_MAC_CFG_TX_IPG_100_10M;
 
-		/* Accept packets again */
-		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
-				    VSC73XX_ARBDISC, BIT(port), 0);
+	if (phy_interface_mode_is_rgmii(interface))
+		val |= VSC73XX_MAC_CFG_CLK_SEL_1000M;
+	else
+		val |= VSC73XX_MAC_CFG_CLK_SEL_EXT;
 
-		/* Allow backward dropping of frames from this port */
-		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
-				    VSC73XX_SBACKWDROP, BIT(port), BIT(port));
+	if (duplex == DUPLEX_FULL)
+		val |= VSC73XX_MAC_CFG_FDX;
 
-		/* Receive mask (disable forwarding) */
-		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
-				    VSC73XX_RECVMASK, BIT(port), 0);
+	/* This routine is described in the datasheet (below ARBDISC register
+	 * description)
+	 */
+	vsc73xx_reset_port(vsc, port, val);
 
-		return;
-	}
+	/* Seed the port randomness with randomness */
+	get_random_bytes(&seed, 1);
+	val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
+	val |= VSC73XX_MAC_CFG_SEED_LOAD;
+	val |= VSC73XX_MAC_CFG_WEXC_DIS;
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
 
-	/* Figure out what speed was negotiated */
-	if (phydev->speed == SPEED_1000) {
-		dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n",
-			port);
-
-		/* Set up default for internal port or external RGMII */
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
-			val = VSC73XX_MAC_CFG_1000M_F_RGMII;
-		else
-			val = VSC73XX_MAC_CFG_1000M_F_PHY;
-		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
-	} else if (phydev->speed == SPEED_100) {
-		if (phydev->duplex == DUPLEX_FULL) {
-			val = VSC73XX_MAC_CFG_100_10M_F_PHY;
-			dev_dbg(vsc->dev,
-				"port %d: 100 Mbit full duplex mode\n",
-				port);
-		} else {
-			val = VSC73XX_MAC_CFG_100_10M_H_PHY;
-			dev_dbg(vsc->dev,
-				"port %d: 100 Mbit half duplex mode\n",
-				port);
-		}
-		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
-	} else if (phydev->speed == SPEED_10) {
-		if (phydev->duplex == DUPLEX_FULL) {
-			val = VSC73XX_MAC_CFG_100_10M_F_PHY;
-			dev_dbg(vsc->dev,
-				"port %d: 10 Mbit full duplex mode\n",
-				port);
-		} else {
-			val = VSC73XX_MAC_CFG_100_10M_H_PHY;
-			dev_dbg(vsc->dev,
-				"port %d: 10 Mbit half duplex mode\n",
-				port);
-		}
-		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
-	} else {
-		dev_err(vsc->dev,
-			"could not adjust link: unknown speed\n");
-	}
+	/* Flow control for the PHY facing ports:
+	 * Use a zero delay pause frame when pause condition is left
+	 * Obey pause control frames
+	 * When generating pause frames, use 0xff as pause value
+	 */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
+		      VSC73XX_FCCONF_ZERO_PAUSE_EN |
+		      VSC73XX_FCCONF_FLOW_CTRL_OBEY |
+		      0xff);
 
-	/* Enable port (forwarding) in the receieve mask */
+	/* Accept packets again */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+			    VSC73XX_ARBDISC, BIT(port), 0);
+
+	/* Enable port (forwarding) in the receive mask */
 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
 			    VSC73XX_RECVMASK, BIT(port), BIT(port));
+
+	/* Disallow backward dropping of frames from this port */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+			    VSC73XX_SBACKWDROP, BIT(port), 0);
+
+	/* Enable TX, RX, deassert reset, stop loading seed */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+			    VSC73XX_MAC_CFG,
+			    VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
+			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
+			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
 }
 
 static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
@@ -1053,12 +1039,17 @@ static void vsc73xx_phylink_get_caps(struct dsa_switch *dsa, int port,
 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000;
 }
 
+static const struct phylink_mac_ops vsc73xx_phylink_mac_ops = {
+	.mac_config = vsc73xx_mac_config,
+	.mac_link_down = vsc73xx_mac_link_down,
+	.mac_link_up = vsc73xx_mac_link_up,
+};
+
 static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.get_tag_protocol = vsc73xx_get_tag_protocol,
 	.setup = vsc73xx_setup,
 	.phy_read = vsc73xx_phy_read,
 	.phy_write = vsc73xx_phy_write,
-	.adjust_link = vsc73xx_adjust_link,
 	.get_strings = vsc73xx_get_strings,
 	.get_ethtool_stats = vsc73xx_get_ethtool_stats,
 	.get_sset_count = vsc73xx_get_sset_count,
@@ -1195,26 +1186,16 @@ int vsc73xx_probe(struct vsc73xx *vsc)
 		 vsc->addr[0], vsc->addr[1], vsc->addr[2],
 		 vsc->addr[3], vsc->addr[4], vsc->addr[5]);
 
-	/* The VSC7395 switch chips have 5+1 ports which means 5
-	 * ordinary ports and a sixth CPU port facing the processor
-	 * with an RGMII interface. These ports are numbered 0..4
-	 * and 6, so they leave a "hole" in the port map for port 5,
-	 * which is invalid.
-	 *
-	 * The VSC7398 has 8 ports, port 7 is again the CPU port.
-	 *
-	 * We allocate 8 ports and avoid access to the nonexistant
-	 * ports.
-	 */
 	vsc->ds = devm_kzalloc(dev, sizeof(*vsc->ds), GFP_KERNEL);
 	if (!vsc->ds)
 		return -ENOMEM;
 
 	vsc->ds->dev = dev;
-	vsc->ds->num_ports = 8;
+	vsc->ds->num_ports = VSC73XX_MAX_NUM_PORTS;
 	vsc->ds->priv = vsc;
 
 	vsc->ds->ops = &vsc73xx_ds_ops;
+	vsc->ds->phylink_mac_ops = &vsc73xx_phylink_mac_ops;
 	ret = dsa_register_switch(vsc->ds);
 	if (ret) {
 		dev_err(dev, "unable to register switch (%d)\n", ret);
diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h
index 30b1f0a36566..2997f7e108b1 100644
--- a/drivers/net/dsa/vitesse-vsc73xx.h
+++ b/drivers/net/dsa/vitesse-vsc73xx.h
@@ -3,8 +3,28 @@
 #include <linux/etherdevice.h>
 #include <linux/gpio/driver.h>
 
+/* The VSC7395 switch chips have 5+1 ports which means 5 ordinary ports and
+ * a sixth CPU port facing the processor with an RGMII interface. These ports
+ * are numbered 0..4 and 6, so they leave a "hole" in the port map for port 5,
+ * which is invalid.
+ *
+ * The VSC7398 has 8 ports, port 7 is again the CPU port.
+ *
+ * We allocate 8 ports and avoid access to the nonexistent ports.
+ */
+#define VSC73XX_MAX_NUM_PORTS	8
+
 /**
- * struct vsc73xx - VSC73xx state container
+ * struct vsc73xx - VSC73xx state container: main data structure
+ * @dev: The device pointer
+ * @reset: The descriptor for the GPIO line tied to the reset pin
+ * @ds: Pointer to the DSA core structure
+ * @gc: Main structure of the GPIO controller
+ * @chipid: Storage for the Chip ID value read from the CHIPID register of the
+ *	switch
+ * @addr: MAC address used in flow control frames
+ * @ops: Structure with hardware-dependent operations
+ * @priv: Pointer to the configuration interface structure
  */
 struct vsc73xx {
 	struct device			*dev;
@@ -17,6 +37,11 @@ struct vsc73xx {
 	void				*priv;
 };
 
+/**
+ * struct vsc73xx_ops - VSC73xx methods container
+ * @read: Method for register reading over the hardware-dependent interface
+ * @write: Method for register writing over the hardware-dependent interface
+ */
 struct vsc73xx_ops {
 	int (*read)(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
 		    u32 *val);
diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c
index 96db032b478f..de3b768f2ff9 100644
--- a/drivers/net/dsa/xrs700x/xrs700x.c
+++ b/drivers/net/dsa/xrs700x/xrs700x.c
@@ -466,13 +466,25 @@ static void xrs700x_phylink_get_caps(struct dsa_switch *ds, int port,
 	}
 }
 
-static void xrs700x_mac_link_up(struct dsa_switch *ds, int port,
-				unsigned int mode, phy_interface_t interface,
+static void xrs700x_mac_config(struct phylink_config *config, unsigned int mode,
+			       const struct phylink_link_state *state)
+{
+}
+
+static void xrs700x_mac_link_down(struct phylink_config *config,
+				  unsigned int mode, phy_interface_t interface)
+{
+}
+
+static void xrs700x_mac_link_up(struct phylink_config *config,
 				struct phy_device *phydev,
+				unsigned int mode, phy_interface_t interface,
 				int speed, int duplex,
 				bool tx_pause, bool rx_pause)
 {
-	struct xrs700x *priv = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct xrs700x *priv = dp->ds->priv;
+	int port = dp->index;
 	unsigned int val;
 
 	switch (speed) {
@@ -699,13 +711,18 @@ static int xrs700x_hsr_leave(struct dsa_switch *ds, int port,
 	return 0;
 }
 
+static const struct phylink_mac_ops xrs700x_phylink_mac_ops = {
+	.mac_config		= xrs700x_mac_config,
+	.mac_link_down		= xrs700x_mac_link_down,
+	.mac_link_up		= xrs700x_mac_link_up,
+};
+
 static const struct dsa_switch_ops xrs700x_ops = {
 	.get_tag_protocol	= xrs700x_get_tag_protocol,
 	.setup			= xrs700x_setup,
 	.teardown		= xrs700x_teardown,
 	.port_stp_state_set	= xrs700x_port_stp_state_set,
 	.phylink_get_caps	= xrs700x_phylink_get_caps,
-	.phylink_mac_link_up	= xrs700x_mac_link_up,
 	.get_strings		= xrs700x_get_strings,
 	.get_sset_count		= xrs700x_get_sset_count,
 	.get_ethtool_stats	= xrs700x_get_ethtool_stats,
@@ -763,6 +780,7 @@ struct xrs700x *xrs700x_switch_alloc(struct device *base, void *devpriv)
 	INIT_DELAYED_WORK(&priv->mib_work, xrs700x_mib_work);
 
 	ds->ops = &xrs700x_ops;
+	ds->phylink_mac_ops = &xrs700x_phylink_mac_ops;
 	ds->priv = priv;
 	priv->dev = base;