summaryrefslogtreecommitdiff
path: root/drivers/net/e1000
diff options
context:
space:
mode:
authorJesse Brandeburg <jesse.brandeburg@intel.com>2009-07-06 10:45:01 +0000
committerDavid S. Miller <davem@davemloft.net>2009-07-06 18:07:52 -0700
commitb7cb8c2c8275ab081b97610b13a83c80904571a6 (patch)
treed65785b59b2adadc5e428392ecde3144afc0e70c /drivers/net/e1000
parentedbbb3ca107715067b27a71e6ea7f58750912aa2 (diff)
e1000: fix flow control thresholds
when testing the jumbo frames with pages patch, the stats would show rx_missed errors (dropped packets) even when connected to a link partner with flow control enabled. this indicates that for this MTU (9000) the flow control thresholds are not adjusting correctly. In fact, before this change, the FCRTH (xoff threshold) is 36864 when the fifo size is only 40000, with 9000 byte MTU. fix it so that we at least have room for one frame after we send the xoff. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/e1000')
-rw-r--r--drivers/net/e1000/e1000_hw.c2
-rw-r--r--drivers/net/e1000/e1000_hw.h3
-rw-r--r--drivers/net/e1000/e1000_main.c58
3 files changed, 33 insertions, 30 deletions
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index e1a3fc1303ee..1e5ae112d57a 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -1955,7 +1955,7 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
s32 ret_val;
u16 i;
u16 phy_data;
- u16 reg_data;
+ u16 reg_data = 0;
DEBUGFUNC("e1000_setup_copper_link");
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 99fce2c5dd26..a8866bdbb671 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -523,11 +523,8 @@ s32 e1000_check_phy_reset_block(struct e1000_hw *hw);
/* The sizes (in bytes) of a ethernet packet */
#define ENET_HEADER_SIZE 14
-#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* With FCS */
#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
#define ETHERNET_FCS_SIZE 4
-#define MAXIMUM_ETHERNET_PACKET_SIZE \
- (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
#define MINIMUM_ETHERNET_PACKET_SIZE \
(MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
#define CRC_LENGTH ETHERNET_FCS_SIZE
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index f2db9e2069e7..d7df00c2dbd6 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -641,8 +641,8 @@ void e1000_reset(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 pba = 0, tx_space, min_tx_space, min_rx_space;
- u16 fc_high_water_mark = E1000_FC_HIGH_DIFF;
bool legacy_pba_adjust = false;
+ u16 hwm;
/* Repartition Pba for greater than 9k mtu
* To take effect CTRL.RST is required.
@@ -686,7 +686,7 @@ void e1000_reset(struct e1000_adapter *adapter)
}
if (legacy_pba_adjust) {
- if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
+ if (hw->max_frame_size > E1000_RXBUFFER_8192)
pba -= 8; /* allocate more FIFO for Tx */
if (hw->mac_type == e1000_82547) {
@@ -696,14 +696,14 @@ void e1000_reset(struct e1000_adapter *adapter)
(E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
atomic_set(&adapter->tx_fifo_stall, 0);
}
- } else if (hw->max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ } else if (hw->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
/* adjust PBA for jumbo frames */
ew32(PBA, pba);
/* To maintain wire speed transmits, the Tx FIFO should be
- * large enough to accomodate two full transmit packets,
+ * large enough to accommodate two full transmit packets,
* rounded up to the next 1KB and expressed in KB. Likewise,
- * the Rx FIFO should be large enough to accomodate at least
+ * the Rx FIFO should be large enough to accommodate at least
* one full receive packet and is similarly rounded up and
* expressed in KB. */
pba = er32(PBA);
@@ -711,13 +711,17 @@ void e1000_reset(struct e1000_adapter *adapter)
tx_space = pba >> 16;
/* lower 16 bits has Rx packet buffer allocation size in KB */
pba &= 0xffff;
- /* don't include ethernet FCS because hardware appends/strips */
- min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
- VLAN_TAG_SIZE;
- min_tx_space = min_rx_space;
- min_tx_space *= 2;
+ /*
+ * the tx fifo also stores 16 bytes of information about the tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (hw->max_frame_size +
+ sizeof(struct e1000_tx_desc) -
+ ETH_FCS_LEN) * 2;
min_tx_space = ALIGN(min_tx_space, 1024);
min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = hw->max_frame_size;
min_rx_space = ALIGN(min_rx_space, 1024);
min_rx_space >>= 10;
@@ -754,19 +758,21 @@ void e1000_reset(struct e1000_adapter *adapter)
ew32(PBA, pba);
- /* flow control settings */
- /* Set the FC high water mark to 90% of the FIFO size.
- * Required to clear last 3 LSB */
- fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
- /* We can't use 90% on small FIFOs because the remainder
- * would be less than 1 full frame. In this case, we size
- * it to allow at least a full frame above the high water
- * mark. */
- if (pba < E1000_PBA_16K)
- fc_high_water_mark = (pba * 1024) - 1600;
-
- hw->fc_high_water = fc_high_water_mark;
- hw->fc_low_water = fc_high_water_mark - 8;
+ /*
+ * flow control settings:
+ * The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, and
+ * - the full Rx FIFO size minus the early receive size (for parts
+ * with ERT support assuming ERT set to E1000_ERT_2048), or
+ * - the full Rx FIFO size minus one full frame
+ */
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - hw->max_frame_size));
+
+ hw->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
+ hw->fc_low_water = hw->fc_high_water - 8;
hw->fc_pause_time = E1000_FC_PAUSE_TIME;
hw->fc_send_xon = 1;
hw->fc = hw->original_fc;
@@ -3474,7 +3480,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
switch (hw->mac_type) {
case e1000_undefined ... e1000_82542_rev2_1:
case e1000_ich8lan:
- if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
return -EINVAL;
}
@@ -3487,7 +3493,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
&eeprom_data);
if ((hw->device_id != E1000_DEV_ID_82573L) ||
(eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
- if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
+ if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
DPRINTK(PROBE, ERR,
"Jumbo Frames not supported.\n");
return -EINVAL;
@@ -3535,7 +3541,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
/* adjust allocation if LPE protects us, and we aren't using SBP */
if (!hw->tbi_compatibility_on &&
- ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
+ ((max_frame == (ETH_FRAME_LEN + ETH_FCS_LEN)) ||
(max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;