Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

1 files changed, 115 insertions, 96 deletions

diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index dda4b8fc9525..2a6c9725e092 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -307,7 +307,7 @@ static int ena_xdp_xmit_buff(struct net_device *dev,
 			     struct ena_rx_buffer *rx_info)
 {
 	struct ena_adapter *adapter = netdev_priv(dev);
-	struct ena_com_tx_ctx ena_tx_ctx = {0};
+	struct ena_com_tx_ctx ena_tx_ctx = {};
 	struct ena_tx_buffer *tx_info;
 	struct ena_ring *xdp_ring;
 	u16 next_to_use, req_id;
@@ -576,15 +576,9 @@ static int ena_xdp_set(struct net_device *netdev, struct netdev_bpf *bpf)
  */
 static int ena_xdp(struct net_device *netdev, struct netdev_bpf *bpf)
 {
-	struct ena_adapter *adapter = netdev_priv(netdev);
-
 	switch (bpf->command) {
 	case XDP_SETUP_PROG:
 		return ena_xdp_set(netdev, bpf);
-	case XDP_QUERY_PROG:
-		bpf->prog_id = adapter->xdp_bpf_prog ?
-			adapter->xdp_bpf_prog->aux->id : 0;
-		break;
 	default:
 		return -EINVAL;
 	}
@@ -655,6 +649,7 @@ static void ena_init_io_rings(struct ena_adapter *adapter,
 		txr->sgl_size = adapter->max_tx_sgl_size;
 		txr->smoothed_interval =
 			ena_com_get_nonadaptive_moderation_interval_tx(ena_dev);
+		txr->disable_meta_caching = adapter->disable_meta_caching;
 
 		/* Don't init RX queues for xdp queues */
 		if (!ENA_IS_XDP_INDEX(adapter, i)) {
@@ -959,8 +954,11 @@ static int ena_alloc_rx_page(struct ena_ring *rx_ring,
 		return -ENOMEM;
 	}
 
+	/* To enable NIC-side port-mirroring, AKA SPAN port,
+	 * we make the buffer readable from the nic as well
+	 */
 	dma = dma_map_page(rx_ring->dev, page, 0, ENA_PAGE_SIZE,
-			   DMA_FROM_DEVICE);
+			   DMA_BIDIRECTIONAL);
 	if (unlikely(dma_mapping_error(rx_ring->dev, dma))) {
 		u64_stats_update_begin(&rx_ring->syncp);
 		rx_ring->rx_stats.dma_mapping_err++;
@@ -993,10 +991,9 @@ static void ena_free_rx_page(struct ena_ring *rx_ring,
 		return;
 	}
 
-	dma_unmap_page(rx_ring->dev,
-		       ena_buf->paddr - rx_ring->rx_headroom,
+	dma_unmap_page(rx_ring->dev, ena_buf->paddr - rx_ring->rx_headroom,
 		       ENA_PAGE_SIZE,
-		       DMA_FROM_DEVICE);
+		       DMA_BIDIRECTIONAL);
 
 	__free_page(page);
 	rx_info->page = NULL;
@@ -1431,7 +1428,7 @@ static struct sk_buff *ena_rx_skb(struct ena_ring *rx_ring,
 	do {
 		dma_unmap_page(rx_ring->dev,
 			       dma_unmap_addr(&rx_info->ena_buf, paddr),
-			       ENA_PAGE_SIZE, DMA_FROM_DEVICE);
+			       ENA_PAGE_SIZE, DMA_BIDIRECTIONAL);
 
 		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_info->page,
 				rx_info->page_offset, len, ENA_PAGE_SIZE);
@@ -1913,7 +1910,10 @@ static int ena_io_poll(struct napi_struct *napi, int budget)
 		/* Update numa and unmask the interrupt only when schedule
 		 * from the interrupt context (vs from sk_busy_loop)
 		 */
-		if (napi_complete_done(napi, rx_work_done)) {
+		if (napi_complete_done(napi, rx_work_done) &&
+		    READ_ONCE(ena_napi->interrupts_masked)) {
+			smp_rmb(); /* make sure interrupts_masked is read */
+			WRITE_ONCE(ena_napi->interrupts_masked, false);
 			/* We apply adaptive moderation on Rx path only.
 			 * Tx uses static interrupt moderation.
 			 */
@@ -1961,6 +1961,9 @@ static irqreturn_t ena_intr_msix_io(int irq, void *data)
 
 	ena_napi->first_interrupt = true;
 
+	WRITE_ONCE(ena_napi->interrupts_masked, true);
+	smp_wmb(); /* write interrupts_masked before calling napi */
+
 	napi_schedule_irqoff(&ena_napi->napi);
 
 	return IRQ_HANDLED;
@@ -2190,14 +2193,13 @@ static void ena_del_napi_in_range(struct ena_adapter *adapter,
 static void ena_init_napi_in_range(struct ena_adapter *adapter,
 				   int first_index, int count)
 {
-	struct ena_napi *napi = {0};
 	int i;
 
 	for (i = first_index; i < first_index + count; i++) {
-		napi = &adapter->ena_napi[i];
+		struct ena_napi *napi = &adapter->ena_napi[i];
 
 		netif_napi_add(adapter->netdev,
-			       &adapter->ena_napi[i].napi,
+			       &napi->napi,
 			       ENA_IS_XDP_INDEX(adapter, i) ? ena_xdp_io_poll : ena_io_poll,
 			       ENA_NAPI_BUDGET);
 
@@ -2776,7 +2778,9 @@ int ena_update_queue_count(struct ena_adapter *adapter, u32 new_channel_count)
 	return dev_was_up ? ena_open(adapter->netdev) : 0;
 }
 
-static void ena_tx_csum(struct ena_com_tx_ctx *ena_tx_ctx, struct sk_buff *skb)
+static void ena_tx_csum(struct ena_com_tx_ctx *ena_tx_ctx,
+			struct sk_buff *skb,
+			bool disable_meta_caching)
 {
 	u32 mss = skb_shinfo(skb)->gso_size;
 	struct ena_com_tx_meta *ena_meta = &ena_tx_ctx->ena_meta;
@@ -2820,7 +2824,9 @@ static void ena_tx_csum(struct ena_com_tx_ctx *ena_tx_ctx, struct sk_buff *skb)
 		ena_meta->l3_hdr_len = skb_network_header_len(skb);
 		ena_meta->l3_hdr_offset = skb_network_offset(skb);
 		ena_tx_ctx->meta_valid = 1;
-
+	} else if (disable_meta_caching) {
+		memset(ena_meta, 0, sizeof(*ena_meta));
+		ena_tx_ctx->meta_valid = 1;
 	} else {
 		ena_tx_ctx->meta_valid = 0;
 	}
@@ -3004,7 +3010,7 @@ static netdev_tx_t ena_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	ena_tx_ctx.header_len = header_len;
 
 	/* set flags and meta data */
-	ena_tx_csum(&ena_tx_ctx, skb);
+	ena_tx_csum(&ena_tx_ctx, skb, tx_ring->disable_meta_caching);
 
 	rc = ena_xmit_common(dev,
 			     tx_ring,
@@ -3118,7 +3124,9 @@ static void ena_config_host_info(struct ena_com_dev *ena_dev, struct pci_dev *pd
 
 	host_info->driver_supported_features =
 		ENA_ADMIN_HOST_INFO_RX_OFFSET_MASK |
-		ENA_ADMIN_HOST_INFO_INTERRUPT_MODERATION_MASK;
+		ENA_ADMIN_HOST_INFO_INTERRUPT_MODERATION_MASK |
+		ENA_ADMIN_HOST_INFO_RX_BUF_MIRRORING_MASK |
+		ENA_ADMIN_HOST_INFO_RSS_CONFIGURABLE_FUNCTION_KEY_MASK;
 
 	rc = ena_com_set_host_attributes(ena_dev);
 	if (rc) {
@@ -3271,10 +3279,71 @@ static int ena_device_validate_params(struct ena_adapter *adapter,
 	return 0;
 }
 
+static void set_default_llq_configurations(struct ena_llq_configurations *llq_config)
+{
+	llq_config->llq_header_location = ENA_ADMIN_INLINE_HEADER;
+	llq_config->llq_stride_ctrl = ENA_ADMIN_MULTIPLE_DESCS_PER_ENTRY;
+	llq_config->llq_num_decs_before_header = ENA_ADMIN_LLQ_NUM_DESCS_BEFORE_HEADER_2;
+	llq_config->llq_ring_entry_size = ENA_ADMIN_LIST_ENTRY_SIZE_128B;
+	llq_config->llq_ring_entry_size_value = 128;
+}
+
+static int ena_set_queues_placement_policy(struct pci_dev *pdev,
+					   struct ena_com_dev *ena_dev,
+					   struct ena_admin_feature_llq_desc *llq,
+					   struct ena_llq_configurations *llq_default_configurations)
+{
+	int rc;
+	u32 llq_feature_mask;
+
+	llq_feature_mask = 1 << ENA_ADMIN_LLQ;
+	if (!(ena_dev->supported_features & llq_feature_mask)) {
+		dev_err(&pdev->dev,
+			"LLQ is not supported Fallback to host mode policy.\n");
+		ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
+		return 0;
+	}
+
+	rc = ena_com_config_dev_mode(ena_dev, llq, llq_default_configurations);
+	if (unlikely(rc)) {
+		dev_err(&pdev->dev,
+			"Failed to configure the device mode.  Fallback to host mode policy.\n");
+		ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
+	}
+
+	return 0;
+}
+
+static int ena_map_llq_mem_bar(struct pci_dev *pdev, struct ena_com_dev *ena_dev,
+			       int bars)
+{
+	bool has_mem_bar = !!(bars & BIT(ENA_MEM_BAR));
+
+	if (!has_mem_bar) {
+		if (ena_dev->tx_mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV) {
+			dev_err(&pdev->dev,
+				"ENA device does not expose LLQ bar. Fallback to host mode policy.\n");
+			ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
+		}
+
+		return 0;
+	}
+
+	ena_dev->mem_bar = devm_ioremap_wc(&pdev->dev,
+					   pci_resource_start(pdev, ENA_MEM_BAR),
+					   pci_resource_len(pdev, ENA_MEM_BAR));
+
+	if (!ena_dev->mem_bar)
+		return -EFAULT;
+
+	return 0;
+}
+
 static int ena_device_init(struct ena_com_dev *ena_dev, struct pci_dev *pdev,
 			   struct ena_com_dev_get_features_ctx *get_feat_ctx,
 			   bool *wd_state)
 {
+	struct ena_llq_configurations llq_config;
 	struct device *dev = &pdev->dev;
 	bool readless_supported;
 	u32 aenq_groups;
@@ -3365,6 +3434,15 @@ static int ena_device_init(struct ena_com_dev *ena_dev, struct pci_dev *pdev,
 
 	*wd_state = !!(aenq_groups & BIT(ENA_ADMIN_KEEP_ALIVE));
 
+	set_default_llq_configurations(&llq_config);
+
+	rc = ena_set_queues_placement_policy(pdev, ena_dev, &get_feat_ctx->llq,
+					     &llq_config);
+	if (rc) {
+		dev_err(&pdev->dev, "ena device init failed\n");
+		goto err_admin_init;
+	}
+
 	return 0;
 
 err_admin_init:
@@ -3871,54 +3949,6 @@ static u32 ena_calc_max_io_queue_num(struct pci_dev *pdev,
 	return max_num_io_queues;
 }
 
-static int ena_set_queues_placement_policy(struct pci_dev *pdev,
-					   struct ena_com_dev *ena_dev,
-					   struct ena_admin_feature_llq_desc *llq,
-					   struct ena_llq_configurations *llq_default_configurations)
-{
-	bool has_mem_bar;
-	int rc;
-	u32 llq_feature_mask;
-
-	llq_feature_mask = 1 << ENA_ADMIN_LLQ;
-	if (!(ena_dev->supported_features & llq_feature_mask)) {
-		dev_err(&pdev->dev,
-			"LLQ is not supported Fallback to host mode policy.\n");
-		ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
-		return 0;
-	}
-
-	has_mem_bar = pci_select_bars(pdev, IORESOURCE_MEM) & BIT(ENA_MEM_BAR);
-
-	rc = ena_com_config_dev_mode(ena_dev, llq, llq_default_configurations);
-	if (unlikely(rc)) {
-		dev_err(&pdev->dev,
-			"Failed to configure the device mode.  Fallback to host mode policy.\n");
-		ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
-		return 0;
-	}
-
-	/* Nothing to config, exit */
-	if (ena_dev->tx_mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_HOST)
-		return 0;
-
-	if (!has_mem_bar) {
-		dev_err(&pdev->dev,
-			"ENA device does not expose LLQ bar. Fallback to host mode policy.\n");
-		ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
-		return 0;
-	}
-
-	ena_dev->mem_bar = devm_ioremap_wc(&pdev->dev,
-					   pci_resource_start(pdev, ENA_MEM_BAR),
-					   pci_resource_len(pdev, ENA_MEM_BAR));
-
-	if (!ena_dev->mem_bar)
-		return -EFAULT;
-
-	return 0;
-}
-
 static void ena_set_dev_offloads(struct ena_com_dev_get_features_ctx *feat,
 				 struct net_device *netdev)
 {
@@ -4034,14 +4064,6 @@ static void ena_release_bars(struct ena_com_dev *ena_dev, struct pci_dev *pdev)
 	pci_release_selected_regions(pdev, release_bars);
 }
 
-static void set_default_llq_configurations(struct ena_llq_configurations *llq_config)
-{
-	llq_config->llq_header_location = ENA_ADMIN_INLINE_HEADER;
-	llq_config->llq_ring_entry_size = ENA_ADMIN_LIST_ENTRY_SIZE_128B;
-	llq_config->llq_stride_ctrl = ENA_ADMIN_MULTIPLE_DESCS_PER_ENTRY;
-	llq_config->llq_num_decs_before_header = ENA_ADMIN_LLQ_NUM_DESCS_BEFORE_HEADER_2;
-	llq_config->llq_ring_entry_size_value = 128;
-}
 
 static int ena_calc_io_queue_size(struct ena_calc_queue_size_ctx *ctx)
 {
@@ -4123,7 +4145,6 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct ena_calc_queue_size_ctx calc_queue_ctx = { 0 };
 	struct ena_com_dev_get_features_ctx get_feat_ctx;
-	struct ena_llq_configurations llq_config;
 	struct ena_com_dev *ena_dev = NULL;
 	struct ena_adapter *adapter;
 	struct net_device *netdev;
@@ -4178,13 +4199,10 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_free_region;
 	}
 
-	set_default_llq_configurations(&llq_config);
-
-	rc = ena_set_queues_placement_policy(pdev, ena_dev, &get_feat_ctx.llq,
-					     &llq_config);
+	rc = ena_map_llq_mem_bar(pdev, ena_dev, bars);
 	if (rc) {
-		dev_err(&pdev->dev, "ena device init failed\n");
-		goto err_device_destroy;
+		dev_err(&pdev->dev, "ena llq bar mapping failed\n");
+		goto err_free_ena_dev;
 	}
 
 	calc_queue_ctx.ena_dev = ena_dev;
@@ -4241,6 +4259,11 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	adapter->xdp_num_queues = 0;
 
 	adapter->rx_copybreak = ENA_DEFAULT_RX_COPYBREAK;
+	if (ena_dev->tx_mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV)
+		adapter->disable_meta_caching =
+			!!(get_feat_ctx.llq.accel_mode.u.get.supported_flags &
+			   BIT(ENA_ADMIN_DISABLE_META_CACHING));
+
 	adapter->wd_state = wd_state;
 
 	snprintf(adapter->name, ENA_NAME_MAX_LEN, "ena_%d", adapters_found);
@@ -4420,13 +4443,12 @@ static void ena_shutdown(struct pci_dev *pdev)
 	__ena_shutoff(pdev, true);
 }
 
-#ifdef CONFIG_PM
 /* ena_suspend - PM suspend callback
- * @pdev: PCI device information struct
- * @state:power state
+ * @dev_d: Device information struct
  */
-static int ena_suspend(struct pci_dev *pdev,  pm_message_t state)
+static int __maybe_unused ena_suspend(struct device *dev_d)
 {
+	struct pci_dev *pdev = to_pci_dev(dev_d);
 	struct ena_adapter *adapter = pci_get_drvdata(pdev);
 
 	u64_stats_update_begin(&adapter->syncp);
@@ -4445,12 +4467,11 @@ static int ena_suspend(struct pci_dev *pdev,  pm_message_t state)
 }
 
 /* ena_resume - PM resume callback
- * @pdev: PCI device information struct
- *
+ * @dev_d: Device information struct
  */
-static int ena_resume(struct pci_dev *pdev)
+static int __maybe_unused ena_resume(struct device *dev_d)
 {
-	struct ena_adapter *adapter = pci_get_drvdata(pdev);
+	struct ena_adapter *adapter = dev_get_drvdata(dev_d);
 	int rc;
 
 	u64_stats_update_begin(&adapter->syncp);
@@ -4462,7 +4483,8 @@ static int ena_resume(struct pci_dev *pdev)
 	rtnl_unlock();
 	return rc;
 }
-#endif
+
+static SIMPLE_DEV_PM_OPS(ena_pm_ops, ena_suspend, ena_resume);
 
 static struct pci_driver ena_pci_driver = {
 	.name		= DRV_MODULE_NAME,
@@ -4470,10 +4492,7 @@ static struct pci_driver ena_pci_driver = {
 	.probe		= ena_probe,
 	.remove		= ena_remove,
 	.shutdown	= ena_shutdown,
-#ifdef CONFIG_PM
-	.suspend    = ena_suspend,
-	.resume     = ena_resume,
-#endif
+	.driver.pm	= &ena_pm_ops,
 	.sriov_configure = pci_sriov_configure_simple,
 };