summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/dec
diff options
context:
space:
mode:
authorMasahiro Yamada <masahiroy@kernel.org>2020-06-14 01:50:22 +0900
committerMasahiro Yamada <masahiroy@kernel.org>2020-06-14 01:57:21 +0900
commita7f7f6248d9740d710fd6bd190293fe5e16410ac (patch)
treedc59d36a552f7e25f909f5b2edc83f96c013befa /drivers/net/ethernet/dec
parente4a42c82e943b97ce124539fcd7a47445b43fa0d (diff)
treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Diffstat (limited to 'drivers/net/ethernet/dec')
-rw-r--r--drivers/net/ethernet/dec/Kconfig2
-rw-r--r--drivers/net/ethernet/dec/tulip/Kconfig26
2 files changed, 14 insertions, 14 deletions
diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig
index df1eeb04d5ea..9e5e5f10bd19 100644
--- a/drivers/net/ethernet/dec/Kconfig
+++ b/drivers/net/ethernet/dec/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_DEC
bool "Digital Equipment devices"
default y
depends on PCI || EISA || CARDBUS
- ---help---
+ help
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig
index 177f36f4b89d..8afc5942179a 100644
--- a/drivers/net/ethernet/dec/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -6,7 +6,7 @@
config NET_TULIP
bool "DEC - Tulip devices"
depends on (PCI || EISA || CARDBUS)
- ---help---
+ help
This selects the "Tulip" family of EISA/PCI network cards.
if NET_TULIP
@@ -15,7 +15,7 @@ config DE2104X
tristate "Early DECchip Tulip (dc2104x) PCI support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21040 (Tulip series) chips. Some LinkSys PCI cards are
@@ -32,7 +32,7 @@ config DE2104X_DSL
depends on DE2104X
range 0 31
default 0
- ---help---
+ help
Setting this value allows to align ring buffer descriptors into their
own cache lines. Value of 4 corresponds to the typical 32 byte line
(the descriptor is 16 bytes). This is necessary on systems that lack
@@ -43,7 +43,7 @@ config TULIP
tristate "DECchip Tulip (dc2114x) PCI support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21140 (Tulip series) chips. Some LinkSys PCI cards are
@@ -58,7 +58,7 @@ config TULIP
config TULIP_MWI
bool "New bus configuration"
depends on TULIP
- ---help---
+ help
This configures your Tulip card specifically for the card and
system cache line size type you are using.
@@ -69,7 +69,7 @@ config TULIP_MWI
config TULIP_MMIO
bool "Use PCI shared mem for NIC registers"
depends on TULIP
- ---help---
+ help
Use PCI shared memory for the NIC registers, rather than going through
the Tulip's PIO (programmed I/O ports). Faster, but could produce
obscure bugs if your mainboard has memory controller timing issues.
@@ -78,7 +78,7 @@ config TULIP_MMIO
config TULIP_NAPI
bool "Use RX polling (NAPI)"
depends on TULIP
- ---help---
+ help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card. It is
still somewhat experimental and thus not yet enabled by default.
@@ -92,7 +92,7 @@ config TULIP_NAPI
config TULIP_NAPI_HW_MITIGATION
bool "Use Interrupt Mitigation"
depends on TULIP_NAPI
- ---help---
+ help
Use HW to reduce RX interrupts. Not strictly necessary since NAPI
reduces RX interrupts by itself. Interrupt mitigation reduces RX
interrupts even at low levels of traffic at the cost of a small
@@ -109,7 +109,7 @@ config DE4X5
depends on (PCI || EISA)
depends on VIRT_TO_BUS || ALPHA || PPC || SPARC
select CRC32
- ---help---
+ help
This is support for the DIGITAL series of PCI/EISA Ethernet cards.
These include the DE425, DE434, DE435, DE450 and DE500 models. If
you have a network card of this type, say Y. More specific
@@ -124,7 +124,7 @@ config WINBOND_840
depends on PCI
select CRC32
select MII
- ---help---
+ help
This driver is for the Winbond W89c840 chip. It also works with
the TX9882 chip on the Compex RL100-ATX board.
More specific information and updates are available from
@@ -134,7 +134,7 @@ config DM9102
tristate "Davicom DM910x/DM980x support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
Davicom (<http://www.davicom.com.tw/>). If you have such a network
(Ethernet) card, say Y. Some information is contained in the file
@@ -147,7 +147,7 @@ config ULI526X
tristate "ULi M526x controller support"
depends on PCI
select CRC32
- ---help---
+ help
This driver is for ULi M5261/M5263 10/100M Ethernet Controller
(<http://www.nvidia.com/page/uli_drivers.html>).
@@ -157,7 +157,7 @@ config ULI526X
config PCMCIA_XIRCOM
tristate "Xircom CardBus support"
depends on CARDBUS
- ---help---
+ help
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
It should work with most DEC 21*4*-based chips/ethercards, as well
as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and