diff options
| author | Ioana Radulescu <ruxandra.radulescu@nxp.com> | 2019-08-28 17:08:15 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2019-08-29 16:52:12 -0700 |
| commit | 8eb3cef8d2642da6b72179da73344a442461cb58 (patch) | |
| tree | f6e8de8f120e74ff33c891224ce3bc45526b5326 /drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | |
| parent | cce62943c08ef9fcf3880d7babf76f9e86c9cdbd (diff) | |
dpaa2-eth: Add pause frame support
Starting with firmware version MC10.18.0, we have support for
L2 flow control. Asymmetrical configuration (Rx or Tx only) is
supported, but not pause frame autonegotioation.
Pause frame configuration is done via ethtool. By default, we start
with flow control enabled on both Rx and Tx. Changes are propagated
to hardware through firmware commands, using two flags (PAUSE,
ASYM_PAUSE) to specify Rx and Tx pause configuration, as follows:
PAUSE | ASYM_PAUSE | Rx pause | Tx pause
----------------------------------------
0 | 0 | disabled | disabled
0 | 1 | disabled | enabled
1 | 0 | enabled | enabled
1 | 1 | enabled | disabled
The hardware can automatically send pause frames when the number
of buffers in the pool goes below a predefined threshold. Due to
this, flow control is incompatible with Rx frame queue taildrop
(both mechanisms target the case when processing of ingress
frames can't keep up with the Rx rate; for large frames, the number
of buffers in the pool may never get low enough to trigger pause
frames as long as taildrop is enabled). So we set pause frame
generation and Rx FQ taildrop as mutually exclusive.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h')
| -rw-r--r-- | drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h index 9af18c24221f..8a0e65b3267f 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h @@ -392,6 +392,7 @@ struct dpaa2_eth_priv { struct dpaa2_eth_drv_stats __percpu *percpu_extras; u16 mc_token; + u8 rx_td_enabled; struct dpni_link_state link_state; bool do_link_poll; @@ -476,6 +477,12 @@ enum dpaa2_eth_rx_dist { #define DPAA2_ETH_DIST_L4DST BIT(8) #define DPAA2_ETH_DIST_ALL (~0ULL) +#define DPNI_PAUSE_VER_MAJOR 7 +#define DPNI_PAUSE_VER_MINOR 13 +#define dpaa2_eth_has_pause_support(priv) \ + (dpaa2_eth_cmp_dpni_ver((priv), DPNI_PAUSE_VER_MAJOR, \ + DPNI_PAUSE_VER_MINOR) >= 0) + static inline unsigned int dpaa2_eth_needed_headroom(struct dpaa2_eth_priv *priv, struct sk_buff *skb) |