dpaa2-eth: add MAC/PHY support through phylink

The dpaa2-eth driver now has support for connecting to its associated
PHY device found through standard OF bindings.

This happens when the DPNI object (that the driver probes on) gets
connected to a DPMAC. When that happens, the device tree is looked up by
the DPMAC ID, and the associated PHY bindings are found.

The old logic of handling the net device's link state by hand still
needs to be kept, as the DPNI can be connected to other devices on the
bus than a DPMAC: other DPNI, DPSW ports, etc. This logic is only
engaged when there is no DPMAC (and therefore no phylink instance)
attached.

The MC firmware support multiple type of DPMAC links: TYPE_FIXED,
TYPE_PHY. The TYPE_FIXED mode does not require any DPMAC management from
Linux side, and as such, the driver will not handle such a DPMAC.

Although PHYLINK typically handles SFP cages and in-band AN modes, for
the moment the driver only supports the RGMII interfaces found on the
LX2160A. Support for other modes will come later.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 25 insertions, 0 deletions

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
index dc9a6c36cac0..0883620631b8 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
@@ -85,6 +85,10 @@ dpaa2_eth_get_link_ksettings(struct net_device *net_dev,
 {
 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
 
+	if (priv->mac)
+		return phylink_ethtool_ksettings_get(priv->mac->phylink,
+						     link_settings);
+
 	link_settings->base.autoneg = AUTONEG_DISABLE;
 	if (!(priv->link_state.options & DPNI_LINK_OPT_HALF_DUPLEX))
 		link_settings->base.duplex = DUPLEX_FULL;
@@ -93,12 +97,29 @@ dpaa2_eth_get_link_ksettings(struct net_device *net_dev,
 	return 0;
 }
 
+static int
+dpaa2_eth_set_link_ksettings(struct net_device *net_dev,
+			     const struct ethtool_link_ksettings *link_settings)
+{
+	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+
+	if (!priv->mac)
+		return -ENOTSUPP;
+
+	return phylink_ethtool_ksettings_set(priv->mac->phylink, link_settings);
+}
+
 static void dpaa2_eth_get_pauseparam(struct net_device *net_dev,
 				     struct ethtool_pauseparam *pause)
 {
 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
 	u64 link_options = priv->link_state.options;
 
+	if (priv->mac) {
+		phylink_ethtool_get_pauseparam(priv->mac->phylink, pause);
+		return;
+	}
+
 	pause->rx_pause = !!(link_options & DPNI_LINK_OPT_PAUSE);
 	pause->tx_pause = pause->rx_pause ^
 			  !!(link_options & DPNI_LINK_OPT_ASYM_PAUSE);
@@ -118,6 +139,9 @@ static int dpaa2_eth_set_pauseparam(struct net_device *net_dev,
 		return -EOPNOTSUPP;
 	}
 
+	if (priv->mac)
+		return phylink_ethtool_set_pauseparam(priv->mac->phylink,
+						      pause);
 	if (pause->autoneg)
 		return -EOPNOTSUPP;
 
@@ -728,6 +752,7 @@ const struct ethtool_ops dpaa2_ethtool_ops = {
 	.get_drvinfo = dpaa2_eth_get_drvinfo,
 	.get_link = ethtool_op_get_link,
 	.get_link_ksettings = dpaa2_eth_get_link_ksettings,
+	.set_link_ksettings = dpaa2_eth_set_link_ksettings,
 	.get_pauseparam = dpaa2_eth_get_pauseparam,
 	.set_pauseparam = dpaa2_eth_set_pauseparam,
 	.get_sset_count = dpaa2_eth_get_sset_count,