summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/fujitsu
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-06-11 01:13:22 -0700
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-12 00:22:08 -0700
commit5346ebf6db077d963e9d81af9df290d7f5532492 (patch)
tree599c964dc98a13be7af437172b1002b5bf2cbf71 /drivers/net/ethernet/fujitsu
parentf2148a472883ddf77626fff52b070655a8a0a788 (diff)
eth16i: Move the Allied Telesis/Fujitsu drivers
Move the Allied Telesis/Fujitsu drivers into drivers/net/ethernet/fujitsu/ and make the necessary Kconfig and Makefile changes. CC: Shingo Fujimoto <shingo@flab.fujitsu.co.jp> CC: Yutaka Tamiya <tamy@flab.fujitsu.co.jp> CC: Rene Schmit <rene@bss.lu> CC: Mika Kuoppala <miku@iki.fi> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/fujitsu')
-rw-r--r--drivers/net/ethernet/fujitsu/Kconfig53
-rw-r--r--drivers/net/ethernet/fujitsu/Makefile7
-rw-r--r--drivers/net/ethernet/fujitsu/at1700.c900
-rw-r--r--drivers/net/ethernet/fujitsu/eth16i.c1484
-rw-r--r--drivers/net/ethernet/fujitsu/fmvj18x_cs.c1187
5 files changed, 3631 insertions, 0 deletions
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
new file mode 100644
index 000000000000..2cd968edb733
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -0,0 +1,53 @@
+#
+# Fujitsu Network device configuration
+#
+
+config NET_VENDOR_FUJITSU
+ bool "Fujitsu devices"
+ depends on ISA || PCMCIA || ((ISA || MCA_LEGACY) && EXPERIMENTAL)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ the questions about Fujitsu cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_FUJITSU
+
+config AT1700
+ tristate "AT1700/1720 support (EXPERIMENTAL)"
+ depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called at1700.
+
+config PCMCIA_FMVJ18X
+ tristate "Fujitsu FMV-J18x PCMCIA support"
+ depends on PCMCIA
+ select CRC32
+ ---help---
+ Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
+ PCMCIA (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called fmvj18x_cs. If unsure, say N.
+
+config ETH16I
+ tristate "ICL EtherTeam 16i/32 support"
+ depends on ISA
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called eth16i.
+
+endif # NET_VENDOR_FUJITSU
diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile
new file mode 100644
index 000000000000..2730ae67d3aa
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Fujitsu network device drivers.
+#
+
+obj-$(CONFIG_AT1700) += at1700.o
+obj-$(CONFIG_ETH16I) += eth16i.o
+obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
diff --git a/drivers/net/ethernet/fujitsu/at1700.c b/drivers/net/ethernet/fujitsu/at1700.c
new file mode 100644
index 000000000000..65a78f965dd2
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/at1700.c
@@ -0,0 +1,900 @@
+/* at1700.c: A network device driver for the Allied Telesis AT1700.
+
+ Written 1993-98 by Donald Becker.
+
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ This is a device driver for the Allied Telesis AT1700, and
+ Fujitsu FMV-181/182/181A/182A/183/184/183A/184A, which are
+ straight-forward Fujitsu MB86965 implementations.
+
+ Modification for Fujitsu FMV-18X cards is done by Yutaka Tamiya
+ (tamy@flab.fujitsu.co.jp).
+
+ Sources:
+ The Fujitsu MB86965 datasheet.
+
+ After the initial version of this driver was written Gerry Sawkins of
+ ATI provided their EEPROM configuration code header file.
+ Thanks to NIIBE Yutaka <gniibe@mri.co.jp> for bug fixes.
+
+ MCA bus (AT1720) support by Rene Schmit <rene@bss.lu>
+
+ Bugs:
+ The MB86965 has a design flaw that makes all probes unreliable. Not
+ only is it difficult to detect, it also moves around in I/O space in
+ response to inb()s from other device probes!
+*/
+
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mca-legacy.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/skbuff.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+static char version[] __initdata =
+ "at1700.c:v1.16 9/11/06 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
+
+#define DRV_NAME "at1700"
+
+/* Tunable parameters. */
+
+/* When to switch from the 64-entry multicast filter to Rx-all-multicast. */
+#define MC_FILTERBREAK 64
+
+/* These unusual address orders are used to verify the CONFIG register. */
+
+static int fmv18x_probe_list[] __initdata = {
+ 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0
+};
+
+/*
+ * ISA
+ */
+
+static unsigned at1700_probe_list[] __initdata = {
+ 0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
+};
+
+/*
+ * MCA
+ */
+#ifdef CONFIG_MCA_LEGACY
+static int at1700_ioaddr_pattern[] __initdata = {
+ 0x00, 0x04, 0x01, 0x05, 0x02, 0x06, 0x03, 0x07
+};
+
+static int at1700_mca_probe_list[] __initdata = {
+ 0x400, 0x1400, 0x2400, 0x3400, 0x4400, 0x5400, 0x6400, 0x7400, 0
+};
+
+static int at1700_irq_pattern[] __initdata = {
+ 0x00, 0x00, 0x00, 0x30, 0x70, 0xb0, 0x00, 0x00,
+ 0x00, 0xf0, 0x34, 0x74, 0xb4, 0x00, 0x00, 0xf4, 0x00
+};
+#endif
+
+/* use 0 for production, 1 for verification, >2 for debug */
+#ifndef NET_DEBUG
+#define NET_DEBUG 1
+#endif
+static unsigned int net_debug = NET_DEBUG;
+
+typedef unsigned char uchar;
+
+/* Information that need to be kept for each board. */
+struct net_local {
+ spinlock_t lock;
+ unsigned char mc_filter[8];
+ uint jumpered:1; /* Set iff the board has jumper config. */
+ uint tx_started:1; /* Packets are on the Tx queue. */
+ uint tx_queue_ready:1; /* Tx queue is ready to be sent. */
+ uint rx_started:1; /* Packets are Rxing. */
+ uchar tx_queue; /* Number of packet on the Tx queue. */
+ char mca_slot; /* -1 means ISA */
+ ushort tx_queue_len; /* Current length of the Tx queue. */
+};
+
+
+/* Offsets from the base address. */
+#define STATUS 0
+#define TX_STATUS 0
+#define RX_STATUS 1
+#define TX_INTR 2 /* Bit-mapped interrupt enable registers. */
+#define RX_INTR 3
+#define TX_MODE 4
+#define RX_MODE 5
+#define CONFIG_0 6 /* Misc. configuration settings. */
+#define CONFIG_1 7
+/* Run-time register bank 2 definitions. */
+#define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */
+#define TX_START 10
+#define COL16CNTL 11 /* Control Reg for 16 collisions */
+#define MODE13 13
+#define RX_CTRL 14
+/* Configuration registers only on the '865A/B chips. */
+#define EEPROM_Ctrl 16
+#define EEPROM_Data 17
+#define CARDSTATUS 16 /* FMV-18x Card Status */
+#define CARDSTATUS1 17 /* FMV-18x Card Status */
+#define IOCONFIG 18 /* Either read the jumper, or move the I/O. */
+#define IOCONFIG1 19
+#define SAPROM 20 /* The station address PROM, if no EEPROM. */
+#define MODE24 24
+#define RESET 31 /* Write to reset some parts of the chip. */
+#define AT1700_IO_EXTENT 32
+#define PORT_OFFSET(o) (o)
+
+
+#define TX_TIMEOUT (HZ/10)
+
+
+/* Index to functions, as function prototypes. */
+
+static int at1700_probe1(struct net_device *dev, int ioaddr);
+static int read_eeprom(long ioaddr, int location);
+static int net_open(struct net_device *dev);
+static netdev_tx_t net_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t net_interrupt(int irq, void *dev_id);
+static void net_rx(struct net_device *dev);
+static int net_close(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static void net_tx_timeout (struct net_device *dev);
+
+
+#ifdef CONFIG_MCA_LEGACY
+struct at1720_mca_adapters_struct {
+ char* name;
+ int id;
+};
+/* rEnE : maybe there are others I don't know off... */
+
+static struct at1720_mca_adapters_struct at1720_mca_adapters[] __initdata = {
+ { "Allied Telesys AT1720AT", 0x6410 },
+ { "Allied Telesys AT1720BT", 0x6413 },
+ { "Allied Telesys AT1720T", 0x6416 },
+ { NULL, 0 },
+};
+#endif
+
+/* Check for a network adaptor of this type, and return '0' iff one exists.
+ If dev->base_addr == 0, probe all likely locations.
+ If dev->base_addr == 1, always return failure.
+ If dev->base_addr == 2, allocate space for the device and return success
+ (detachable devices only).
+ */
+
+static int io = 0x260;
+
+static int irq;
+
+static void cleanup_card(struct net_device *dev)
+{
+#ifdef CONFIG_MCA_LEGACY
+ struct net_local *lp = netdev_priv(dev);
+ if (lp->mca_slot >= 0)
+ mca_mark_as_unused(lp->mca_slot);
+#endif
+ free_irq(dev->irq, NULL);
+ release_region(dev->base_addr, AT1700_IO_EXTENT);
+}
+
+struct net_device * __init at1700_probe(int unit)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+ unsigned *port;
+ int err = 0;
+
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
+ if (unit >= 0) {
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ io = dev->base_addr;
+ irq = dev->irq;
+ } else {
+ dev->base_addr = io;
+ dev->irq = irq;
+ }
+
+ if (io > 0x1ff) { /* Check a single specified location. */
+ err = at1700_probe1(dev, io);
+ } else if (io != 0) { /* Don't probe at all. */
+ err = -ENXIO;
+ } else {
+ for (port = at1700_probe_list; *port; port++) {
+ if (at1700_probe1(dev, *port) == 0)
+ break;
+ dev->irq = irq;
+ }
+ if (!*port)
+ err = -ENODEV;
+ }
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return dev;
+out1:
+ cleanup_card(dev);
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+
+static const struct net_device_ops at1700_netdev_ops = {
+ .ndo_open = net_open,
+ .ndo_stop = net_close,
+ .ndo_start_xmit = net_send_packet,
+ .ndo_set_multicast_list = set_rx_mode,
+ .ndo_tx_timeout = net_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/* The Fujitsu datasheet suggests that the NIC be probed for by checking its
+ "signature", the default bit pattern after a reset. This *doesn't* work --
+ there is no way to reset the bus interface without a complete power-cycle!
+
+ It turns out that ATI came to the same conclusion I did: the only thing
+ that can be done is checking a few bits and then diving right into an
+ EEPROM read. */
+
+static int __init at1700_probe1(struct net_device *dev, int ioaddr)
+{
+ static const char fmv_irqmap[4] = {3, 7, 10, 15};
+ static const char fmv_irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15};
+ static const char at1700_irqmap[8] = {3, 4, 5, 9, 10, 11, 14, 15};
+ unsigned int i, irq, is_fmv18x = 0, is_at1700 = 0;
+ int slot, ret = -ENODEV;
+ struct net_local *lp = netdev_priv(dev);
+
+ if (!request_region(ioaddr, AT1700_IO_EXTENT, DRV_NAME))
+ return -EBUSY;
+
+ /* Resetting the chip doesn't reset the ISA interface, so don't bother.
+ That means we have to be careful with the register values we probe
+ for.
+ */
+#ifdef notdef
+ printk("at1700 probe at %#x, eeprom is %4.4x %4.4x %4.4x ctrl %4.4x.\n",
+ ioaddr, read_eeprom(ioaddr, 4), read_eeprom(ioaddr, 5),
+ read_eeprom(ioaddr, 6), inw(ioaddr + EEPROM_Ctrl));
+#endif
+
+#ifdef CONFIG_MCA_LEGACY
+ /* rEnE (rene@bss.lu): got this from 3c509 driver source , adapted for AT1720 */
+
+ /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, heavily
+ modified by Chris Beauregard (cpbeaure@csclub.uwaterloo.ca)
+ to support standard MCA probing. */
+
+ /* redone for multi-card detection by ZP Gu (zpg@castle.net) */
+ /* now works as a module */
+
+ if (MCA_bus) {
+ int j;
+ int l_i;
+ u_char pos3, pos4;
+
+ for (j = 0; at1720_mca_adapters[j].name != NULL; j ++) {
+ slot = 0;
+ while (slot != MCA_NOTFOUND) {
+
+ slot = mca_find_unused_adapter( at1720_mca_adapters[j].id, slot );
+ if (slot == MCA_NOTFOUND) break;
+
+ /* if we get this far, an adapter has been detected and is
+ enabled */
+
+ pos3 = mca_read_stored_pos( slot, 3 );
+ pos4 = mca_read_stored_pos( slot, 4 );
+
+ for (l_i = 0; l_i < 8; l_i++)
+ if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i])
+ break;
+ ioaddr = at1700_mca_probe_list[l_i];
+
+ for (irq = 0; irq < 0x10; irq++)
+ if (((((pos4>>4) & 0x0f) | (pos3 & 0xf0)) & 0xff) == at1700_irq_pattern[irq])
+ break;
+
+ /* probing for a card at a particular IO/IRQ */
+ if ((dev->irq && dev->irq != irq) ||
+ (dev->base_addr && dev->base_addr != ioaddr)) {
+ slot++; /* probing next slot */
+ continue;
+ }
+
+ dev->irq = irq;
+
+ /* claim the slot */
+ mca_set_adapter_name( slot, at1720_mca_adapters[j].name );
+ mca_mark_as_used(slot);
+
+ goto found;
+ }
+ }
+ /* if we get here, we didn't find an MCA adapter - try ISA */
+ }
+#endif
+ slot = -1;
+ /* We must check for the EEPROM-config boards first, else accessing
+ IOCONFIG0 will move the board! */
+ if (at1700_probe_list[inb(ioaddr + IOCONFIG1) & 0x07] == ioaddr &&
+ read_eeprom(ioaddr, 4) == 0x0000 &&
+ (read_eeprom(ioaddr, 5) & 0xff00) == 0xF400)
+ is_at1700 = 1;
+ else if (inb(ioaddr + SAPROM ) == 0x00 &&
+ inb(ioaddr + SAPROM + 1) == 0x00 &&
+ inb(ioaddr + SAPROM + 2) == 0x0e)
+ is_fmv18x = 1;
+ else {
+ goto err_out;
+ }
+
+#ifdef CONFIG_MCA_LEGACY
+found:
+#endif
+
+ /* Reset the internal state machines. */
+ outb(0, ioaddr + RESET);
+
+ if (is_at1700) {
+ irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04)
+ | (read_eeprom(ioaddr, 0)>>14)];
+ } else {
+ /* Check PnP mode for FMV-183/184/183A/184A. */
+ /* This PnP routine is very poor. IO and IRQ should be known. */
+ if (inb(ioaddr + CARDSTATUS1) & 0x20) {
+ irq = dev->irq;
+ for (i = 0; i < 8; i++) {
+ if (irq == fmv_irqmap_pnp[i])
+ break;
+ }
+ if (i == 8) {
+ goto err_mca;
+ }
+ } else {
+ if (fmv18x_probe_list[inb(ioaddr + IOCONFIG) & 0x07] != ioaddr)
+ goto err_mca;
+ irq = fmv_irqmap[(inb(ioaddr + IOCONFIG)>>6) & 0x03];
+ }
+ }
+
+ printk("%s: %s found at %#3x, IRQ %d, address ", dev->name,
+ is_at1700 ? "AT1700" : "FMV-18X", ioaddr, irq);
+
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+
+ if (is_at1700) {
+ for(i = 0; i < 3; i++) {
+ unsigned short eeprom_val = read_eeprom(ioaddr, 4+i);
+ ((unsigned short *)dev->dev_addr)[i] = ntohs(eeprom_val);
+ }
+ } else {
+ for(i = 0; i < 6; i++) {
+ unsigned char val = inb(ioaddr + SAPROM + i);
+ dev->dev_addr[i] = val;
+ }
+ }
+ printk("%pM", dev->dev_addr);
+
+ /* The EEPROM word 12 bit 0x0400 means use regular 100 ohm 10baseT signals,
+ rather than 150 ohm shielded twisted pair compensation.
+ 0x0000 == auto-sense the interface
+ 0x0800 == use TP interface
+ 0x1800 == use coax interface
+ */
+ {
+ const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2"};
+ if (is_at1700) {
+ ushort setup_value = read_eeprom(ioaddr, 12);
+ dev->if_port = setup_value >> 8;
+ } else {
+ ushort setup_value = inb(ioaddr + CARDSTATUS);
+ switch (setup_value & 0x07) {
+ case 0x01: /* 10base5 */
+ case 0x02: /* 10base2 */
+ dev->if_port = 0x18; break;
+ case 0x04: /* 10baseT */
+ dev->if_port = 0x08; break;
+ default: /* auto-sense */
+ dev->if_port = 0x00; break;
+ }
+ }
+ printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]);
+ }
+
+ /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit
+ bus access, two 4K Tx queues, and disabled Tx and Rx. */
+ outb(0xda, ioaddr + CONFIG_0);
+
+ /* Set the station address in bank zero. */
+ outb(0x00, ioaddr + CONFIG_1);
+ for (i = 0; i < 6; i++)
+ outb(dev->dev_addr[i], ioaddr + PORT_OFFSET(8 + i));
+
+ /* Switch to bank 1 and set the multicast table to accept none. */
+ outb(0x04, ioaddr + CONFIG_1);
+ for (i = 0; i < 8; i++)
+ outb(0x00, ioaddr + PORT_OFFSET(8 + i));
+
+
+ /* Switch to bank 2 */
+ /* Lock our I/O address, and set manual processing mode for 16 collisions. */
+ outb(0x08, ioaddr + CONFIG_1);
+ outb(dev->if_port, ioaddr + MODE13);
+ outb(0x00, ioaddr + COL16CNTL);
+
+ if (net_debug)
+ printk(version);
+
+ dev->netdev_ops = &at1700_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ spin_lock_init(&lp->lock);
+
+ lp->jumpered = is_fmv18x;
+ lp->mca_slot = slot;
+ /* Snarf the interrupt vector now. */
+ ret = request_irq(irq, net_interrupt, 0, DRV_NAME, dev);
+ if (ret) {
+ printk(KERN_ERR "AT1700 at %#3x is unusable due to a "
+ "conflict on IRQ %d.\n",
+ ioaddr, irq);
+ goto err_mca;
+ }
+
+ return 0;
+
+err_mca:
+#ifdef CONFIG_MCA_LEGACY
+ if (slot >= 0)
+ mca_mark_as_unused(slot);
+#endif
+err_out:
+ release_region(ioaddr, AT1700_IO_EXTENT);
+ return ret;
+}
+
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x40 /* EEPROM shift clock, in reg. 16. */
+#define EE_CS 0x20 /* EEPROM chip select, in reg. 16. */
+#define EE_DATA_WRITE 0x80 /* EEPROM chip data in, in reg. 17. */
+#define EE_DATA_READ 0x80 /* EEPROM chip data out, in reg. 17. */
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5 << 6)
+#define EE_READ_CMD (6 << 6)
+#define EE_ERASE_CMD (7 << 6)
+
+static int __init read_eeprom(long ioaddr, int location)
+{
+ int i;
+ unsigned short retval = 0;
+ long ee_addr = ioaddr + EEPROM_Ctrl;
+ long ee_daddr = ioaddr + EEPROM_Data;
+ int read_cmd = location | EE_READ_CMD;
+
+ /* Shift the read command bits out. */
+ for (i = 9; i >= 0; i--) {
+ short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ outb(EE_CS, ee_addr);
+ outb(dataval, ee_daddr);
+ outb(EE_CS | EE_SHIFT_CLK, ee_addr); /* EEPROM clock tick. */
+ }
+ outb(EE_DATA_WRITE, ee_daddr);
+ for (i = 16; i > 0; i--) {
+ outb(EE_CS, ee_addr);
+ outb(EE_CS | EE_SHIFT_CLK, ee_addr);
+ retval = (retval << 1) | ((inb(ee_daddr) & EE_DATA_READ) ? 1 : 0);
+ }
+
+ /* Terminate the EEPROM access. */
+ outb(EE_CS, ee_addr);
+ outb(EE_SHIFT_CLK, ee_addr);
+ outb(0, ee_addr);
+ return retval;
+}
+
+
+
+static int net_open(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit
+ bus access, and two 4K Tx queues. */
+ outb(0x5a, ioaddr + CONFIG_0);
+
+ /* Powerup, switch to register bank 2, and enable the Rx and Tx. */
+ outb(0xe8, ioaddr + CONFIG_1);
+
+ lp->tx_started = 0;
+ lp->tx_queue_ready = 1;
+ lp->rx_started = 0;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+
+ /* Turn on hardware Tx and Rx interrupts. */
+ outb(0x82, ioaddr + TX_INTR);
+ outb(0x81, ioaddr + RX_INTR);
+
+ /* Enable the IRQ on boards of fmv18x it is feasible. */
+ if (lp->jumpered) {
+ outb(0x80, ioaddr + IOCONFIG1);
+ }
+
+ netif_start_queue(dev);
+ return 0;
+}
+
+static void net_tx_timeout (struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ printk ("%s: transmit timed out with status %04x, %s?\n", dev->name,
+ inw (ioaddr + STATUS), inb (ioaddr + TX_STATUS) & 0x80
+ ? "IRQ conflict" : "network cable problem");
+ printk ("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n",
+ dev->name, inw(ioaddr + TX_STATUS), inw(ioaddr + TX_INTR), inw(ioaddr + TX_MODE),
+ inw(ioaddr + CONFIG_0), inw(ioaddr + DATAPORT), inw(ioaddr + TX_START),
+ inw(ioaddr + MODE13 - 1), inw(ioaddr + RX_CTRL));
+ dev->stats.tx_errors++;
+ /* ToDo: We should try to restart the adaptor... */
+ outw(0xffff, ioaddr + MODE24);
+ outw (0xffff, ioaddr + TX_STATUS);
+ outb (0x5a, ioaddr + CONFIG_0);
+ outb (0xe8, ioaddr + CONFIG_1);
+ outw (0x8182, ioaddr + TX_INTR);
+ outb (0x00, ioaddr + TX_START);
+ outb (0x03, ioaddr + COL16CNTL);
+
+ dev->trans_start = jiffies; /* prevent tx timeout */
+
+ lp->tx_started = 0;
+ lp->tx_queue_ready = 1;
+ lp->rx_started = 0;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+
+ netif_wake_queue(dev);
+}
+
+
+static netdev_tx_t net_send_packet (struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+ short len = skb->len;
+ unsigned char *buf = skb->data;
+ static u8 pad[ETH_ZLEN];
+
+ netif_stop_queue (dev);
+
+ /* We may not start transmitting unless we finish transferring
+ a packet into the Tx queue. During executing the following
+ codes we possibly catch a Tx interrupt. Thus we flag off
+ tx_queue_ready, so that we prevent the interrupt routine
+ (net_interrupt) to start transmitting. */
+ lp->tx_queue_ready = 0;
+ {
+ outw (length, ioaddr + DATAPORT);
+ /* Packet data */
+ outsw (ioaddr + DATAPORT, buf, len >> 1);
+ /* Check for dribble byte */
+ if (len & 1) {
+ outw(skb->data[skb->len-1], ioaddr + DATAPORT);
+ len++;
+ }
+ /* Check for packet padding */
+ if (length != skb->len)
+ outsw(ioaddr + DATAPORT, pad, (length - len + 1) >> 1);
+
+ lp->tx_queue++;
+ lp->tx_queue_len += length + 2;
+ }
+ lp->tx_queue_ready = 1;
+
+ if (lp->tx_started == 0) {
+ /* If the Tx is idle, always trigger a transmit. */
+ outb (0x80 | lp->tx_queue, ioaddr + TX_START);
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ lp->tx_started = 1;
+ netif_start_queue (dev);
+ } else if (lp->tx_queue_len < 4096 - 1502)
+ /* Yes, there is room for one more packet. */
+ netif_start_queue (dev);
+ dev_kfree_skb (skb);
+
+ return NETDEV_TX_OK;
+}
+
+/* The typical workload of the driver:
+ Handle the network interface interrupts. */
+static irqreturn_t net_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct net_local *lp;
+ int ioaddr, status;
+ int handled = 0;
+
+ if (dev == NULL) {
+ printk ("at1700_interrupt(): irq %d for unknown device.\n", irq);
+ return IRQ_NONE;
+ }
+
+ ioaddr = dev->base_addr;
+ lp = netdev_priv(dev);
+
+ spin_lock (&lp->lock);
+
+ status = inw(ioaddr + TX_STATUS);
+ outw(status, ioaddr + TX_STATUS);
+
+ if (net_debug > 4)
+ printk("%s: Interrupt with status %04x.\n", dev->name, status);
+ if (lp->rx_started == 0 &&
+ (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) {
+ /* Got a packet(s).
+ We cannot execute net_rx more than once at the same time for
+ the same device. During executing net_rx, we possibly catch a
+ Tx interrupt. Thus we flag on rx_started, so that we prevent
+ the interrupt routine (net_interrupt) to dive into net_rx
+ again. */
+ handled = 1;
+ lp->rx_started = 1;
+ outb(0x00, ioaddr + RX_INTR); /* Disable RX intr. */
+ net_rx(dev);
+ outb(0x81, ioaddr + RX_INTR); /* Enable RX intr. */
+ lp->rx_started = 0;
+ }
+ if (status & 0x00ff) {
+ handled = 1;
+ if (status & 0x02) {
+ /* More than 16 collisions occurred */
+ if (net_debug > 4)
+ printk("%s: 16 Collision occur during Txing.\n", dev->name);
+ /* Cancel sending a packet. */
+ outb(0x03, ioaddr + COL16CNTL);
+ dev->stats.collisions++;
+ }
+ if (status & 0x82) {
+ dev->stats.tx_packets++;
+ /* The Tx queue has any packets and is not being
+ transferred a packet from the host, start
+ transmitting. */
+ if (lp->tx_queue && lp->tx_queue_ready) {
+ outb(0x80 | lp->tx_queue, ioaddr + TX_START);
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ dev->trans_start = jiffies;
+ netif_wake_queue (dev);
+ } else {
+ lp->tx_started = 0;
+ netif_wake_queue (dev);
+ }
+ }
+ }
+
+ spin_unlock (&lp->lock);
+ return IRQ_RETVAL(handled);
+}
+
+/* We have a good packet(s), get it/them out of the buffers. */
+static void
+net_rx(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ int boguscount = 5;
+
+ while ((inb(ioaddr + RX_MODE) & 0x40) == 0) {
+ ushort status = inw(ioaddr + DATAPORT);
+ ushort pkt_len = inw(ioaddr + DATAPORT);
+
+ if (net_debug > 4)
+ printk("%s: Rxing packet mode %02x status %04x.\n",
+ dev->name, inb(ioaddr + RX_MODE), status);
+#ifndef final_version
+ if (status == 0) {
+ outb(0x05, ioaddr + RX_CTRL);
+ break;
+ }
+#endif
+
+ if ((status & 0xF0) != 0x20) { /* There was an error. */
+ dev->stats.rx_errors++;
+ if (status & 0x08) dev->stats.rx_length_errors++;
+ if (status & 0x04) dev->stats.rx_frame_errors++;
+ if (status & 0x02) dev->stats.rx_crc_errors++;
+ if (status & 0x01) dev->stats.rx_over_errors++;
+ } else {
+ /* Malloc up new buffer. */
+ struct sk_buff *skb;
+
+ if (pkt_len > 1550) {
+ printk("%s: The AT1700 claimed a very large packet, size %d.\n",
+ dev->name, pkt_len);
+ /* Prime the FIFO and then flush the packet. */
+ inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
+ outb(0x05, ioaddr + RX_CTRL);
+ dev->stats.rx_errors++;
+ break;
+ }
+ skb = dev_alloc_skb(pkt_len+3);
+ if (skb == NULL) {
+ printk("%s: Memory squeeze, dropping packet (len %d).\n",
+ dev->name, pkt_len);
+ /* Prime the FIFO and then flush the packet. */
+ inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
+ outb(0x05, ioaddr + RX_CTRL);
+ dev->stats.rx_dropped++;
+ break;
+ }
+ skb_reserve(skb,2);
+
+ insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1);
+ skb->protocol=eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+ }
+ if (--boguscount <= 0)
+ break;
+ }
+
+ /* If any worth-while packets have been received, dev_rint()
+ has done a mark_bh(NET_BH) for us and will work on them
+ when we get to the bottom-half routine. */
+ {
+ int i;
+ for (i = 0; i < 20; i++) {
+ if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40)
+ break;
+ inw(ioaddr + DATAPORT); /* dummy status read */
+ outb(0x05, ioaddr + RX_CTRL);
+ }
+
+ if (net_debug > 5)
+ printk("%s: Exint Rx packet with mode %02x after %d ticks.\n",
+ dev->name, inb(ioaddr + RX_MODE), i);
+ }
+}
+
+/* The inverse routine to net_open(). */
+static int net_close(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ netif_stop_queue(dev);
+
+ /* Set configuration register 0 to disable Tx and Rx. */
+ outb(0xda, ioaddr + CONFIG_0);
+
+ /* No statistic counters on the chip to update. */
+
+ /* Disable the IRQ on boards of fmv18x where it is feasible. */
+ if (lp->jumpered)
+ outb(0x00, ioaddr + IOCONFIG1);
+
+ /* Power-down the chip. Green, green, green! */
+ outb(0x00, ioaddr + CONFIG_1);
+ return 0;
+}
+
+/*
+ Set the multicast/promiscuous mode for this adaptor.
+*/
+
+static void
+set_rx_mode(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ struct net_local *lp = netdev_priv(dev);
+ unsigned char mc_filter[8]; /* Multicast hash filter */
+ unsigned long flags;
+
+ if (dev->flags & IFF_PROMISC) {
+ memset(mc_filter, 0xff, sizeof(mc_filter));
+ outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */
+ } else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ memset(mc_filter, 0xff, sizeof(mc_filter));
+ outb(2, ioaddr + RX_MODE); /* Use normal mode. */
+ } else if (netdev_mc_empty(dev)) {
+ memset(mc_filter, 0x00, sizeof(mc_filter));
+ outb(1, ioaddr + RX_MODE); /* Ignore almost all multicasts. */
+ } else {
+ struct netdev_hw_addr *ha;
+
+ memset(mc_filter, 0, sizeof(mc_filter));
+ netdev_for_each_mc_addr(ha, dev) {
+ unsigned int bit =
+ ether_crc_le(ETH_ALEN, ha->addr) >> 26;
+ mc_filter[bit >> 3] |= (1 << bit);
+ }
+ outb(0x02, ioaddr + RX_MODE); /* Use normal mode. */
+ }
+
+ spin_lock_irqsave (&lp->lock, flags);
+ if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) {
+ int i;
+ int saved_bank = inw(ioaddr + CONFIG_0);
+ /* Switch to bank 1 and set the multicast table. */
+ outw((saved_bank & ~0x0C00) | 0x0480, ioaddr + CONFIG_0);
+ for (i = 0; i < 8; i++)
+ outb(mc_filter[i], ioaddr + PORT_OFFSET(8 + i));
+ memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter));
+ outw(saved_bank, ioaddr + CONFIG_0);
+ }
+ spin_unlock_irqrestore (&lp->lock, flags);
+}
+
+#ifdef MODULE
+static struct net_device *dev_at1700;
+
+module_param(io, int, 0);
+module_param(irq, int, 0);
+module_param(net_debug, int, 0);
+MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address");
+MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number");
+MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)");
+
+static int __init at1700_module_init(void)
+{
+ if (io == 0)
+ printk("at1700: You should not use auto-probing with insmod!\n");
+ dev_at1700 = at1700_probe(-1);
+ if (IS_ERR(dev_at1700))
+ return PTR_ERR(dev_at1700);
+ return 0;
+}
+
+static void __exit at1700_module_exit(void)
+{
+ unregister_netdev(dev_at1700);
+ cleanup_card(dev_at1700);
+ free_netdev(dev_at1700);
+}
+module_init(at1700_module_init);
+module_exit(at1700_module_exit);
+#endif /* MODULE */
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/fujitsu/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c
new file mode 100644
index 000000000000..12d28e9d0cb7
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/eth16i.c
@@ -0,0 +1,1484 @@
+/* eth16i.c An ICL EtherTeam 16i and 32 EISA ethernet driver for Linux
+
+ Written 1994-1999 by Mika Kuoppala
+
+ Copyright (C) 1994-1999 by Mika Kuoppala
+ Based on skeleton.c and heavily on at1700.c by Donald Becker
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ The author may be reached as miku@iki.fi
+
+ This driver supports following cards :
+ - ICL EtherTeam 16i
+ - ICL EtherTeam 32 EISA
+ (Uses true 32 bit transfers rather than 16i compatibility mode)
+
+ Example Module usage:
+ insmod eth16i.o io=0x2a0 mediatype=bnc
+
+ mediatype can be one of the following: bnc,tp,dix,auto,eprom
+
+ 'auto' will try to autoprobe mediatype.
+ 'eprom' will use whatever type defined in eprom.
+
+ I have benchmarked driver with PII/300Mhz as a ftp client
+ and 486/33Mhz as a ftp server. Top speed was 1128.37 kilobytes/sec.
+
+ Sources:
+ - skeleton.c a sample network driver core for linux,
+ written by Donald Becker <becker@scyld.com>
+ - at1700.c a driver for Allied Telesis AT1700, written
+ by Donald Becker.
+ - e16iSRV.asm a Netware 3.X Server Driver for ICL EtherTeam16i
+ written by Markku Viima
+ - The Fujitsu MB86965 databook.
+
+ Author thanks following persons due to their valueble assistance:
+ Markku Viima (ICL)
+ Ari Valve (ICL)
+ Donald Becker
+ Kurt Huwig <kurt@huwig.de>
+
+ Revision history:
+
+ Version Date Description
+
+ 0.01 15.12-94 Initial version (card detection)
+ 0.02 23.01-95 Interrupt is now hooked correctly
+ 0.03 01.02-95 Rewrote initialization part
+ 0.04 07.02-95 Base skeleton done...
+ Made a few changes to signature checking
+ to make it a bit reliable.
+ - fixed bug in tx_buf mapping
+ - fixed bug in initialization (DLC_EN
+ wasn't enabled when initialization
+ was done.)
+ 0.05 08.02-95 If there were more than one packet to send,
+ transmit was jammed due to invalid
+ register write...now fixed
+ 0.06 19.02-95 Rewrote interrupt handling
+ 0.07 13.04-95 Wrote EEPROM read routines
+ Card configuration now set according to
+ data read from EEPROM
+ 0.08 23.06-95 Wrote part that tries to probe used interface
+ port if AUTO is selected
+
+ 0.09 01.09-95 Added module support
+
+ 0.10 04.09-95 Fixed receive packet allocation to work
+ with kernels > 1.3.x
+
+ 0.20 20.09-95 Added support for EtherTeam32 EISA
+
+ 0.21 17.10-95 Removed the unnecessary extern
+ init_etherdev() declaration. Some
+ other cleanups.
+
+ 0.22 22.02-96 Receive buffer was not flushed
+ correctly when faulty packet was
+ received. Now fixed.
+
+ 0.23 26.02-96 Made resetting the adapter
+ more reliable.
+
+ 0.24 27.02-96 Rewrote faulty packet handling in eth16i_rx
+
+ 0.25 22.05-96 kfree() was missing from cleanup_module.
+
+ 0.26 11.06-96 Sometimes card was not found by
+ check_signature(). Now made more reliable.
+
+ 0.27 23.06-96 Oops. 16 consecutive collisions halted
+ adapter. Now will try to retransmit
+ MAX_COL_16 times before finally giving up.
+
+ 0.28 28.10-97 Added dev_id parameter (NULL) for free_irq
+
+ 0.29 29.10-97 Multiple card support for module users
+
+ 0.30 30.10-97 Fixed irq allocation bug.
+ (request_irq moved from probe to open)
+
+ 0.30a 21.08-98 Card detection made more relaxed. Driver
+ had problems with some TCP/IP-PROM boots
+ to find the card. Suggested by
+ Kurt Huwig <kurt@huwig.de>
+
+ 0.31 28.08-98 Media interface port can now be selected
+ with module parameters or kernel
+ boot parameters.
+
+ 0.32 31.08-98 IRQ was never freed if open/close
+ pair wasn't called. Now fixed.
+
+ 0.33 10.09-98 When eth16i_open() was called after
+ eth16i_close() chip never recovered.
+ Now more shallow reset is made on
+ close.
+
+ 0.34 29.06-99 Fixed one bad #ifdef.
+ Changed ioaddr -> io for consistency
+
+ 0.35 01.07-99 transmit,-receive bytes were never
+ updated in stats.
+
+ Bugs:
+ In some cases the media interface autoprobing code doesn't find
+ the correct interface type. In this case you can
+ manually choose the interface type in DOS with E16IC.EXE which is
+ configuration software for EtherTeam16i and EtherTeam32 cards.
+ This is also true for IRQ setting. You cannot use module
+ parameter to configure IRQ of the card (yet).
+
+ To do:
+ - Real multicast support
+ - Rewrite the media interface autoprobing code. Its _horrible_ !
+ - Possibly merge all the MB86965 specific code to external
+ module for use by eth16.c and Donald's at1700.c
+ - IRQ configuration with module parameter. I will do
+ this when i will get enough info about setting
+ irq without configuration utility.
+*/
+
+static char *version =
+ "eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala (miku@iki.fi)\n";
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/dma.h>
+
+
+
+/* Few macros */
+#define BITSET(ioaddr, bnum) ((outb(((inb(ioaddr)) | (bnum)), ioaddr)))
+#define BITCLR(ioaddr, bnum) ((outb(((inb(ioaddr)) & (~(bnum))), ioaddr)))
+
+/* This is the I/O address space for Etherteam 16i adapter. */
+#define ETH16I_IO_EXTENT 32
+
+/* Ticks before deciding that transmit has timed out */
+#define TX_TIMEOUT (400*HZ/1000)
+
+/* Maximum loop count when receiving packets */
+#define MAX_RX_LOOP 20
+
+/* Some interrupt masks */
+#define ETH16I_INTR_ON 0xef8a /* Higher is receive mask */
+#define ETH16I_INTR_OFF 0x0000
+
+/* Buffers header status byte meanings */
+#define PKT_GOOD BIT(5)
+#define PKT_GOOD_RMT BIT(4)
+#define PKT_SHORT BIT(3)
+#define PKT_ALIGN_ERR BIT(2)
+#define PKT_CRC_ERR BIT(1)
+#define PKT_RX_BUF_OVERFLOW BIT(0)
+
+/* Transmit status register (DLCR0) */
+#define TX_STATUS_REG 0
+#define TX_DONE BIT(7)
+#define NET_BUSY BIT(6)
+#define TX_PKT_RCD BIT(5)
+#define CR_LOST BIT(4)
+#define TX_JABBER_ERR BIT(3)
+#define COLLISION BIT(2)
+#define COLLISIONS_16 BIT(1)
+
+/* Receive status register (DLCR1) */
+#define RX_STATUS_REG 1
+#define RX_PKT BIT(7) /* Packet received */
+#define BUS_RD_ERR BIT(6)
+#define SHORT_PKT_ERR BIT(3)
+#define ALIGN_ERR BIT(2)
+#define CRC_ERR BIT(1)
+#define RX_BUF_OVERFLOW BIT(0)
+
+/* Transmit Interrupt Enable Register (DLCR2) */
+#define TX_INTR_REG 2
+#define TX_INTR_DONE BIT(7)
+#define TX_INTR_COL BIT(2)
+#define TX_INTR_16_COL BIT(1)
+
+/* Receive Interrupt Enable Register (DLCR3) */
+#define RX_INTR_REG 3
+#define RX_INTR_RECEIVE BIT(7)
+#define RX_INTR_SHORT_PKT BIT(3)
+#define RX_INTR_CRC_ERR BIT(1)
+#define RX_INTR_BUF_OVERFLOW BIT(0)
+
+/* Transmit Mode Register (DLCR4) */
+#define TRANSMIT_MODE_REG 4
+#define LOOPBACK_CONTROL BIT(1)
+#define CONTROL_OUTPUT BIT(2)
+
+/* Receive Mode Register (DLCR5) */
+#define RECEIVE_MODE_REG 5
+#define RX_BUFFER_EMPTY BIT(6)
+#define ACCEPT_BAD_PACKETS BIT(5)
+#define RECEIVE_SHORT_ADDR BIT(4)
+#define ACCEPT_SHORT_PACKETS BIT(3)
+#define REMOTE_RESET BIT(2)
+
+#define ADDRESS_FILTER_MODE BIT(1) | BIT(0)
+#define REJECT_ALL 0
+#define ACCEPT_ALL 3
+#define MODE_1 1 /* NODE ID, BC, MC, 2-24th bit */
+#define MODE_2 2 /* NODE ID, BC, MC, Hash Table */
+
+/* Configuration Register 0 (DLCR6) */
+#define CONFIG_REG_0 6
+#define DLC_EN BIT(7)
+#define SRAM_CYCLE_TIME_100NS BIT(6)
+#define SYSTEM_BUS_WIDTH_8 BIT(5) /* 1 = 8bit, 0 = 16bit */
+#define BUFFER_WIDTH_8 BIT(4) /* 1 = 8bit, 0 = 16bit */
+#define TBS1 BIT(3)
+#define TBS0 BIT(2)
+#define SRAM_BS1 BIT(1) /* 00=8kb, 01=16kb */
+#define SRAM_BS0 BIT(0) /* 10=32kb, 11=64kb */
+
+#ifndef ETH16I_TX_BUF_SIZE /* 0 = 2kb, 1 = 4kb */
+#define ETH16I_TX_BUF_SIZE 3 /* 2 = 8kb, 3 = 16kb */
+#endif
+#define TX_BUF_1x2048 0
+#define TX_BUF_2x2048 1
+#define TX_BUF_2x4098 2
+#define TX_BUF_2x8192 3
+
+/* Configuration Register 1 (DLCR7) */
+#define CONFIG_REG_1 7
+#define POWERUP BIT(5)
+
+/* Transmit start register */
+#define TRANSMIT_START_REG 10
+#define TRANSMIT_START_RB 2
+#define TX_START BIT(7) /* Rest of register bit indicate*/
+ /* number of packets in tx buffer*/
+/* Node ID registers (DLCR8-13) */
+#define NODE_ID_0 8
+#define NODE_ID_RB 0
+
+/* Hash Table registers (HT8-15) */
+#define HASH_TABLE_0 8
+#define HASH_TABLE_RB 1
+
+/* Buffer memory ports */
+#define BUFFER_MEM_PORT_LB 8
+#define DATAPORT BUFFER_MEM_PORT_LB
+#define BUFFER_MEM_PORT_HB 9
+
+/* 16 Collision control register (BMPR11) */
+#define COL_16_REG 11
+#define HALT_ON_16 0x00
+#define RETRANS_AND_HALT_ON_16 0x02
+
+/* Maximum number of attempts to send after 16 concecutive collisions */
+#define MAX_COL_16 10
+
+/* DMA Burst and Transceiver Mode Register (BMPR13) */
+#define TRANSCEIVER_MODE_REG 13
+#define TRANSCEIVER_MODE_RB 2
+#define IO_BASE_UNLOCK BIT(7)
+#define LOWER_SQUELCH_TRESH BIT(6)
+#define LINK_TEST_DISABLE BIT(5)
+#define AUI_SELECT BIT(4)
+#define DIS_AUTO_PORT_SEL BIT(3)
+
+/* Filter Self Receive Register (BMPR14) */
+#define FILTER_SELF_RX_REG 14
+#define SKIP_RX_PACKET BIT(2)
+#define FILTER_SELF_RECEIVE BIT(0)
+
+/* EEPROM Control Register (BMPR 16) */
+#define EEPROM_CTRL_REG 16
+
+/* EEPROM Data Register (BMPR 17) */
+#define EEPROM_DATA_REG 17
+
+/* NMC93CSx6 EEPROM Control Bits */
+#define CS_0 0x00
+#define CS_1 0x20
+#define SK_0 0x00
+#define SK_1 0x40
+#define DI_0 0x00
+#define DI_1 0x80
+
+/* NMC93CSx6 EEPROM Instructions */
+#define EEPROM_READ 0x80
+
+/* NMC93CSx6 EEPROM Addresses */
+#define E_NODEID_0 0x02
+#define E_NODEID_1 0x03
+#define E_NODEID_2 0x04
+#define E_PORT_SELECT 0x14
+ #define E_PORT_BNC 0x00
+ #define E_PORT_DIX 0x01
+ #define E_PORT_TP 0x02
+ #define E_PORT_AUTO 0x03
+ #define E_PORT_FROM_EPROM 0x04
+#define E_PRODUCT_CFG 0x30
+
+
+/* Macro to slow down io between EEPROM clock transitions */
+#define eeprom_slow_io() do { int _i = 40; while(--_i > 0) { inb(0x80); }}while(0)
+
+/* Jumperless Configuration Register (BMPR19) */
+#define JUMPERLESS_CONFIG 19
+
+/* ID ROM registers, writing to them also resets some parts of chip */
+#define ID_ROM_0 24
+#define ID_ROM_7 31
+#define RESET ID_ROM_0
+
+/* This is the I/O address list to be probed when seeking the card */
+static unsigned int eth16i_portlist[] __initdata = {
+ 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
+};
+
+static unsigned int eth32i_portlist[] __initdata = {
+ 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x6000, 0x7000, 0x8000,
+ 0x9000, 0xA000, 0xB000, 0xC000, 0xD000, 0xE000, 0xF000, 0
+};
+
+/* This is the Interrupt lookup table for Eth16i card */
+static unsigned int eth16i_irqmap[] __initdata = { 9, 10, 5, 15, 0 };
+#define NUM_OF_ISA_IRQS 4
+
+/* This is the Interrupt lookup table for Eth32i card */
+static unsigned int eth32i_irqmap[] __initdata = { 3, 5, 7, 9, 10, 11, 12, 15, 0 };
+#define EISA_IRQ_REG 0xc89
+#define NUM_OF_EISA_IRQS 8
+
+static unsigned int eth16i_tx_buf_map[] = { 2048, 2048, 4096, 8192 };
+
+/* Use 0 for production, 1 for verification, >2 for debug */
+#ifndef ETH16I_DEBUG
+#define ETH16I_DEBUG 0
+#endif
+static unsigned int eth16i_debug = ETH16I_DEBUG;
+
+/* Information for each board */
+
+struct eth16i_local {
+ unsigned char tx_started;
+ unsigned char tx_buf_busy;
+ unsigned short tx_queue; /* Number of packets in transmit buffer */
+ unsigned short tx_queue_len;
+ unsigned int tx_buf_size;
+ unsigned long open_time;
+ unsigned long tx_buffered_packets;
+ unsigned long tx_buffered_bytes;
+ unsigned long col_16;
+ spinlock_t lock;
+};
+
+/* Function prototypes */
+
+static int eth16i_probe1(struct net_device *dev, int ioaddr);
+static int eth16i_check_signature(int ioaddr);
+static int eth16i_probe_port(int ioaddr);
+static void eth16i_set_port(int ioaddr, int porttype);
+static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l);
+static int eth16i_receive_probe_packet(int ioaddr);
+static int eth16i_get_irq(int ioaddr);
+static int eth16i_read_eeprom(int ioaddr, int offset);
+static int eth16i_read_eeprom_word(int ioaddr);
+static void eth16i_eeprom_cmd(int ioaddr, unsigned char command);
+static int eth16i_open(struct net_device *dev);
+static int eth16i_close(struct net_device *dev);
+static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev);
+static void eth16i_rx(struct net_device *dev);
+static void eth16i_timeout(struct net_device *dev);
+static irqreturn_t eth16i_interrupt(int irq, void *dev_id);
+static void eth16i_reset(struct net_device *dev);
+static void eth16i_timeout(struct net_device *dev);
+static void eth16i_skip_packet(struct net_device *dev);
+static void eth16i_multicast(struct net_device *dev);
+static void eth16i_select_regbank(unsigned char regbank, int ioaddr);
+static void eth16i_initialize(struct net_device *dev, int boot);
+
+#if 0
+static int eth16i_set_irq(struct net_device *dev);
+#endif
+
+#ifdef MODULE
+static ushort eth16i_parse_mediatype(const char* s);
+#endif
+
+static char cardname[] __initdata = "ICL EtherTeam 16i/32";
+
+static int __init do_eth16i_probe(struct net_device *dev)
+{
+ int i;
+ int ioaddr;
+ int base_addr = dev->base_addr;
+
+ if(eth16i_debug > 4)
+ printk(KERN_DEBUG "Probing started for %s\n", cardname);
+
+ if(base_addr > 0x1ff) /* Check only single location */
+ return eth16i_probe1(dev, base_addr);
+ else if(base_addr != 0) /* Don't probe at all */
+ return -ENXIO;
+
+ /* Seek card from the ISA io address space */
+ for(i = 0; (ioaddr = eth16i_portlist[i]) ; i++)
+ if(eth16i_probe1(dev, ioaddr) == 0)
+ return 0;
+
+ /* Seek card from the EISA io address space */
+ for(i = 0; (ioaddr = eth32i_portlist[i]) ; i++)
+ if(eth16i_probe1(dev, ioaddr) == 0)
+ return 0;
+
+ return -ENODEV;
+}
+
+#ifndef MODULE
+struct net_device * __init eth16i_probe(int unit)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct eth16i_local));
+ int err;
+
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ err = do_eth16i_probe(dev);
+ if (err)
+ goto out;
+ return dev;
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+#endif
+
+static const struct net_device_ops eth16i_netdev_ops = {
+ .ndo_open = eth16i_open,
+ .ndo_stop = eth16i_close,
+ .ndo_start_xmit = eth16i_tx,
+ .ndo_set_multicast_list = eth16i_multicast,
+ .ndo_tx_timeout = eth16i_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int __init eth16i_probe1(struct net_device *dev, int ioaddr)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ static unsigned version_printed;
+ int retval;
+
+ /* Let's grab the region */
+ if (!request_region(ioaddr, ETH16I_IO_EXTENT, cardname))
+ return -EBUSY;
+
+ /*
+ The MB86985 chip has on register which holds information in which
+ io address the chip lies. First read this register and compare
+ it to our current io address and if match then this could
+ be our chip.
+ */
+
+ if(ioaddr < 0x1000) {
+ if(eth16i_portlist[(inb(ioaddr + JUMPERLESS_CONFIG) & 0x07)]
+ != ioaddr) {
+ retval = -ENODEV;
+ goto out;
+ }
+ }
+
+ /* Now we will go a bit deeper and try to find the chip's signature */
+
+ if(eth16i_check_signature(ioaddr) != 0) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ /*
+ Now it seems that we have found a ethernet chip in this particular
+ ioaddr. The MB86985 chip has this feature, that when you read a
+ certain register it will increase it's io base address to next
+ configurable slot. Now when we have found the chip, first thing is
+ to make sure that the chip's ioaddr will hold still here.
+ */
+
+ eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
+ outb(0x00, ioaddr + TRANSCEIVER_MODE_REG);
+
+ outb(0x00, ioaddr + RESET); /* Reset some parts of chip */
+ BITSET(ioaddr + CONFIG_REG_0, BIT(7)); /* Disable the data link */
+
+ if( (eth16i_debug & version_printed++) == 0)
+ printk(KERN_INFO "%s", version);
+
+ dev->base_addr = ioaddr;
+ dev->irq = eth16i_get_irq(ioaddr);
+
+ /* Try to obtain interrupt vector */
+
+ if ((retval = request_irq(dev->irq, (void *)&eth16i_interrupt, 0, cardname, dev))) {
+ printk(KERN_WARNING "%s at %#3x, but is unusable due to conflicting IRQ %d.\n",
+ cardname, ioaddr, dev->irq);
+ goto out;
+ }
+
+ printk(KERN_INFO "%s: %s at %#3x, IRQ %d, ",
+ dev->name, cardname, ioaddr, dev->irq);
+
+
+ /* Now we will have to lock the chip's io address */
+ eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
+ outb(0x38, ioaddr + TRANSCEIVER_MODE_REG);
+
+ eth16i_initialize(dev, 1); /* Initialize rest of the chip's registers */
+
+ /* Now let's same some energy by shutting down the chip ;) */
+ BITCLR(ioaddr + CONFIG_REG_1, POWERUP);
+
+ /* Initialize the device structure */
+ dev->netdev_ops = &eth16i_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ spin_lock_init(&lp->lock);
+
+ retval = register_netdev(dev);
+ if (retval)
+ goto out1;
+ return 0;
+out1:
+ free_irq(dev->irq, dev);
+out:
+ release_region(ioaddr, ETH16I_IO_EXTENT);
+ return retval;
+}
+
+
+static void eth16i_initialize(struct net_device *dev, int boot)
+{
+ int ioaddr = dev->base_addr;
+ int i, node_w = 0;
+ unsigned char node_byte = 0;
+
+ /* Setup station address */
+ eth16i_select_regbank(NODE_ID_RB, ioaddr);
+ for(i = 0 ; i < 3 ; i++) {
+ unsigned short node_val = eth16i_read_eeprom(ioaddr, E_NODEID_0 + i);
+ ((unsigned short *)dev->dev_addr)[i] = ntohs(node_val);
+ }
+
+ for(i = 0; i < 6; i++) {
+ outb( ((unsigned char *)dev->dev_addr)[i], ioaddr + NODE_ID_0 + i);
+ if(boot) {
+ printk("%02x", inb(ioaddr + NODE_ID_0 + i));
+ if(i != 5)
+ printk(":");
+ }
+ }
+
+ /* Now we will set multicast addresses to accept none */
+ eth16i_select_regbank(HASH_TABLE_RB, ioaddr);
+ for(i = 0; i < 8; i++)
+ outb(0x00, ioaddr + HASH_TABLE_0 + i);
+
+ /*
+ Now let's disable the transmitter and receiver, set the buffer ram
+ cycle time, bus width and buffer data path width. Also we shall
+ set transmit buffer size and total buffer size.
+ */
+
+ eth16i_select_regbank(2, ioaddr);
+
+ node_byte = 0;
+ node_w = eth16i_read_eeprom(ioaddr, E_PRODUCT_CFG);
+
+ if( (node_w & 0xFF00) == 0x0800)
+ node_byte |= BUFFER_WIDTH_8;
+
+ node_byte |= SRAM_BS1;
+
+ if( (node_w & 0x00FF) == 64)
+ node_byte |= SRAM_BS0;
+
+ node_byte |= DLC_EN | SRAM_CYCLE_TIME_100NS | (ETH16I_TX_BUF_SIZE << 2);
+
+ outb(node_byte, ioaddr + CONFIG_REG_0);
+
+ /* We shall halt the transmitting, if 16 collisions are detected */
+ outb(HALT_ON_16, ioaddr + COL_16_REG);
+
+#ifdef MODULE
+ /* if_port already set by init_module() */
+#else
+ dev->if_port = (dev->mem_start < E_PORT_FROM_EPROM) ?
+ dev->mem_start : E_PORT_FROM_EPROM;
+#endif
+
+ /* Set interface port type */
+ if(boot) {
+ static const char * const porttype[] = {
+ "BNC", "DIX", "TP", "AUTO", "FROM_EPROM"
+ };
+
+ switch(dev->if_port)
+ {
+
+ case E_PORT_FROM_EPROM:
+ dev->if_port = eth16i_read_eeprom(ioaddr, E_PORT_SELECT);
+ break;
+
+ case E_PORT_AUTO:
+ dev->if_port = eth16i_probe_port(ioaddr);
+ break;
+
+ case E_PORT_BNC:
+ case E_PORT_TP:
+ case E_PORT_DIX:
+ break;
+ }
+
+ printk(" %s interface.\n", porttype[dev->if_port]);
+
+ eth16i_set_port(ioaddr, dev->if_port);
+ }
+
+ /* Set Receive Mode to normal operation */
+ outb(MODE_2, ioaddr + RECEIVE_MODE_REG);
+}
+
+static int eth16i_probe_port(int ioaddr)
+{
+ int i;
+ int retcode;
+ unsigned char dummy_packet[64];
+
+ /* Powerup the chip */
+ outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
+
+ BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
+
+ eth16i_select_regbank(NODE_ID_RB, ioaddr);
+
+ for(i = 0; i < 6; i++) {
+ dummy_packet[i] = inb(ioaddr + NODE_ID_0 + i);
+ dummy_packet[i+6] = inb(ioaddr + NODE_ID_0 + i);
+ }
+
+ dummy_packet[12] = 0x00;
+ dummy_packet[13] = 0x04;
+ memset(dummy_packet + 14, 0, sizeof(dummy_packet) - 14);
+
+ eth16i_select_regbank(2, ioaddr);
+
+ for(i = 0; i < 3; i++) {
+ BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
+ BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
+ eth16i_set_port(ioaddr, i);
+
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "Set port number %d\n", i);
+
+ retcode = eth16i_send_probe_packet(ioaddr, dummy_packet, 64);
+ if(retcode == 0) {
+ retcode = eth16i_receive_probe_packet(ioaddr);
+ if(retcode != -1) {
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "Eth16i interface port found at %d\n", i);
+ return i;
+ }
+ }
+ else {
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "TRANSMIT_DONE timeout when probing interface port\n");
+ }
+ }
+
+ if( eth16i_debug > 1)
+ printk(KERN_DEBUG "Using default port\n");
+
+ return E_PORT_BNC;
+}
+
+static void eth16i_set_port(int ioaddr, int porttype)
+{
+ unsigned short temp = 0;
+
+ eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
+ outb(LOOPBACK_CONTROL, ioaddr + TRANSMIT_MODE_REG);
+
+ temp |= DIS_AUTO_PORT_SEL;
+
+ switch(porttype) {
+
+ case E_PORT_BNC :
+ temp |= AUI_SELECT;
+ break;
+
+ case E_PORT_TP :
+ break;
+
+ case E_PORT_DIX :
+ temp |= AUI_SELECT;
+ BITSET(ioaddr + TRANSMIT_MODE_REG, CONTROL_OUTPUT);
+ break;
+ }
+
+ outb(temp, ioaddr + TRANSCEIVER_MODE_REG);
+
+ if(eth16i_debug > 1) {
+ printk(KERN_DEBUG "TRANSMIT_MODE_REG = %x\n", inb(ioaddr + TRANSMIT_MODE_REG));
+ printk(KERN_DEBUG "TRANSCEIVER_MODE_REG = %x\n",
+ inb(ioaddr+TRANSCEIVER_MODE_REG));
+ }
+}
+
+static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l)
+{
+ unsigned long starttime;
+
+ outb(0xff, ioaddr + TX_STATUS_REG);
+
+ outw(l, ioaddr + DATAPORT);
+ outsw(ioaddr + DATAPORT, (unsigned short *)b, (l + 1) >> 1);
+
+ starttime = jiffies;
+ outb(TX_START | 1, ioaddr + TRANSMIT_START_REG);
+
+ while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) {
+ if( time_after(jiffies, starttime + TX_TIMEOUT)) {
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int eth16i_receive_probe_packet(int ioaddr)
+{
+ unsigned long starttime;
+
+ starttime = jiffies;
+
+ while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) {
+ if( time_after(jiffies, starttime + TX_TIMEOUT)) {
+
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "Timeout occurred waiting transmit packet received\n");
+ starttime = jiffies;
+ while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) {
+ if( time_after(jiffies, starttime + TX_TIMEOUT)) {
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "Timeout occurred waiting receive packet\n");
+ return -1;
+ }
+ }
+
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "RECEIVE_PACKET\n");
+ return 0; /* Found receive packet */
+ }
+ }
+
+ if(eth16i_debug > 1) {
+ printk(KERN_DEBUG "TRANSMIT_PACKET_RECEIVED %x\n", inb(ioaddr + TX_STATUS_REG));
+ printk(KERN_DEBUG "RX_STATUS_REG = %x\n", inb(ioaddr + RX_STATUS_REG));
+ }
+
+ return 0; /* Return success */
+}
+
+#if 0
+static int eth16i_set_irq(struct net_device* dev)
+{
+ const int ioaddr = dev->base_addr;
+ const int irq = dev->irq;
+ int i = 0;
+
+ if(ioaddr < 0x1000) {
+ while(eth16i_irqmap[i] && eth16i_irqmap[i] != irq)
+ i++;
+
+ if(i < NUM_OF_ISA_IRQS) {
+ u8 cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
+ cbyte = (cbyte & 0x3F) | (i << 6);
+ outb(cbyte, ioaddr + JUMPERLESS_CONFIG);
+ return 0;
+ }
+ }
+ else {
+ printk(KERN_NOTICE "%s: EISA Interrupt cannot be set. Use EISA Configuration utility.\n", dev->name);
+ }
+
+ return -1;
+
+}
+#endif
+
+static int __init eth16i_get_irq(int ioaddr)
+{
+ unsigned char cbyte;
+
+ if( ioaddr < 0x1000) {
+ cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
+ return eth16i_irqmap[((cbyte & 0xC0) >> 6)];
+ } else { /* Oh..the card is EISA so method getting IRQ different */
+ unsigned short index = 0;
+ cbyte = inb(ioaddr + EISA_IRQ_REG);
+ while( (cbyte & 0x01) == 0) {
+ cbyte = cbyte >> 1;
+ index++;
+ }
+ return eth32i_irqmap[index];
+ }
+}
+
+static int __init eth16i_check_signature(int ioaddr)
+{
+ int i;
+ unsigned char creg[4] = { 0 };
+
+ for(i = 0; i < 4 ; i++) {
+
+ creg[i] = inb(ioaddr + TRANSMIT_MODE_REG + i);
+
+ if(eth16i_debug > 1)
+ printk("eth16i: read signature byte %x at %x\n",
+ creg[i],
+ ioaddr + TRANSMIT_MODE_REG + i);
+ }
+
+ creg[0] &= 0x0F; /* Mask collision cnr */
+ creg[2] &= 0x7F; /* Mask DCLEN bit */
+
+#if 0
+ /*
+ This was removed because the card was sometimes left to state
+ from which it couldn't be find anymore. If there is need
+ to more strict check still this have to be fixed.
+ */
+ if( ! ((creg[0] == 0x06) && (creg[1] == 0x41)) ) {
+ if(creg[1] != 0x42)
+ return -1;
+ }
+#endif
+
+ if( !((creg[2] == 0x36) && (creg[3] == 0xE0)) ) {
+ creg[2] &= 0x40;
+ creg[3] &= 0x03;
+
+ if( !((creg[2] == 0x40) && (creg[3] == 0x00)) )
+ return -1;
+ }
+
+ if(eth16i_read_eeprom(ioaddr, E_NODEID_0) != 0)
+ return -1;
+
+ if((eth16i_read_eeprom(ioaddr, E_NODEID_1) & 0xFF00) != 0x4B00)
+ return -1;
+
+ return 0;
+}
+
+static int eth16i_read_eeprom(int ioaddr, int offset)
+{
+ int data = 0;
+
+ eth16i_eeprom_cmd(ioaddr, EEPROM_READ | offset);
+ outb(CS_1, ioaddr + EEPROM_CTRL_REG);
+ data = eth16i_read_eeprom_word(ioaddr);
+ outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
+
+ return data;
+}
+
+static int eth16i_read_eeprom_word(int ioaddr)
+{
+ int i;
+ int data = 0;
+
+ for(i = 16; i > 0; i--) {
+ outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
+ eeprom_slow_io();
+ outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
+ eeprom_slow_io();
+ data = (data << 1) |
+ ((inb(ioaddr + EEPROM_DATA_REG) & DI_1) ? 1 : 0);
+
+ eeprom_slow_io();
+ }
+
+ return data;
+}
+
+static void eth16i_eeprom_cmd(int ioaddr, unsigned char command)
+{
+ int i;
+
+ outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
+ outb(DI_0, ioaddr + EEPROM_DATA_REG);
+ outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
+ outb(DI_1, ioaddr + EEPROM_DATA_REG);
+ outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
+
+ for(i = 7; i >= 0; i--) {
+ short cmd = ( (command & (1 << i)) ? DI_1 : DI_0 );
+ outb(cmd, ioaddr + EEPROM_DATA_REG);
+ outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
+ eeprom_slow_io();
+ outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
+ eeprom_slow_io();
+ }
+}
+
+static int eth16i_open(struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ /* Powerup the chip */
+ outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
+
+ /* Initialize the chip */
+ eth16i_initialize(dev, 0);
+
+ /* Set the transmit buffer size */
+ lp->tx_buf_size = eth16i_tx_buf_map[ETH16I_TX_BUF_SIZE & 0x03];
+
+ if(eth16i_debug > 0)
+ printk(KERN_DEBUG "%s: transmit buffer size %d\n",
+ dev->name, lp->tx_buf_size);
+
+ /* Now enable Transmitter and Receiver sections */
+ BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
+
+ /* Now switch to register bank 2, for run time operation */
+ eth16i_select_regbank(2, ioaddr);
+
+ lp->open_time = jiffies;
+ lp->tx_started = 0;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+
+ /* Turn on interrupts*/
+ outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
+
+ netif_start_queue(dev);
+ return 0;
+}
+
+static int eth16i_close(struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ eth16i_reset(dev);
+
+ /* Turn off interrupts*/
+ outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
+
+ netif_stop_queue(dev);
+
+ lp->open_time = 0;
+
+ /* Disable transmit and receive */
+ BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
+
+ /* Reset the chip */
+ /* outb(0xff, ioaddr + RESET); */
+ /* outw(0xffff, ioaddr + TX_STATUS_REG); */
+
+ outb(0x00, ioaddr + CONFIG_REG_1);
+
+ return 0;
+}
+
+static void eth16i_timeout(struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ /*
+ If we get here, some higher level has decided that
+ we are broken. There should really be a "kick me"
+ function call instead.
+ */
+
+ outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
+ printk(KERN_WARNING "%s: transmit timed out with status %04x, %s ?\n",
+ dev->name,
+ inw(ioaddr + TX_STATUS_REG), (inb(ioaddr + TX_STATUS_REG) & TX_DONE) ?
+ "IRQ conflict" : "network cable problem");
+
+ dev->trans_start = jiffies; /* prevent tx timeout */
+
+ /* Let's dump all registers */
+ if(eth16i_debug > 0) {
+ printk(KERN_DEBUG "%s: timeout: %02x %02x %02x %02x %02x %02x %02x %02x.\n",
+ dev->name, inb(ioaddr + 0),
+ inb(ioaddr + 1), inb(ioaddr + 2),
+ inb(ioaddr + 3), inb(ioaddr + 4),
+ inb(ioaddr + 5),
+ inb(ioaddr + 6), inb(ioaddr + 7));
+
+ printk(KERN_DEBUG "%s: transmit start reg: %02x. collision reg %02x\n",
+ dev->name, inb(ioaddr + TRANSMIT_START_REG),
+ inb(ioaddr + COL_16_REG));
+ printk(KERN_DEBUG "lp->tx_queue = %d\n", lp->tx_queue);
+ printk(KERN_DEBUG "lp->tx_queue_len = %d\n", lp->tx_queue_len);
+ printk(KERN_DEBUG "lp->tx_started = %d\n", lp->tx_started);
+ }
+ dev->stats.tx_errors++;
+ eth16i_reset(dev);
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
+ netif_wake_queue(dev);
+}
+
+static netdev_tx_t eth16i_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ int status = 0;
+ ushort length = skb->len;
+ unsigned char *buf;
+ unsigned long flags;
+
+ if (length < ETH_ZLEN) {
+ if (skb_padto(skb, ETH_ZLEN))
+ return NETDEV_TX_OK;
+ length = ETH_ZLEN;
+ }
+ buf = skb->data;
+
+ netif_stop_queue(dev);
+
+ /* Turn off TX interrupts */
+ outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
+
+ /* We would be better doing the disable_irq tricks the 3c509 does,
+ that would make this suck a lot less */
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ if( (length + 2) > (lp->tx_buf_size - lp->tx_queue_len)) {
+ if(eth16i_debug > 0)
+ printk(KERN_WARNING "%s: Transmit buffer full.\n", dev->name);
+ }
+ else {
+ outw(length, ioaddr + DATAPORT);
+
+ if( ioaddr < 0x1000 )
+ outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
+ else {
+ unsigned char frag = length % 4;
+ outsl(ioaddr + DATAPORT, buf, length >> 2);
+ if( frag != 0 ) {
+ outsw(ioaddr + DATAPORT, (buf + (length & 0xFFFC)), 1);
+ if( frag == 3 )
+ outsw(ioaddr + DATAPORT,
+ (buf + (length & 0xFFFC) + 2), 1);
+ }
+ }
+ lp->tx_buffered_packets++;
+ lp->tx_buffered_bytes = length;
+ lp->tx_queue++;
+ lp->tx_queue_len += length + 2;
+ }
+ lp->tx_buf_busy = 0;
+
+ if(lp->tx_started == 0) {
+ /* If the transmitter is idle..always trigger a transmit */
+ outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ lp->tx_started = 1;
+ netif_wake_queue(dev);
+ }
+ else if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
+ /* There is still more room for one more packet in tx buffer */
+ netif_wake_queue(dev);
+ }
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
+ /* Turn TX interrupts back on */
+ /* outb(TX_INTR_DONE | TX_INTR_16_COL, ioaddr + TX_INTR_REG); */
+ status = 0;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
+static void eth16i_rx(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ int boguscount = MAX_RX_LOOP;
+
+ /* Loop until all packets have been read */
+ while( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) {
+
+ /* Read status byte from receive buffer */
+ ushort status = inw(ioaddr + DATAPORT);
+
+ /* Get the size of the packet from receive buffer */
+ ushort pkt_len = inw(ioaddr + DATAPORT);
+
+ if(eth16i_debug > 4)
+ printk(KERN_DEBUG "%s: Receiving packet mode %02x status %04x.\n",
+ dev->name,
+ inb(ioaddr + RECEIVE_MODE_REG), status);
+
+ if( !(status & PKT_GOOD) ) {
+ dev->stats.rx_errors++;
+
+ if( (pkt_len < ETH_ZLEN) || (pkt_len > ETH_FRAME_LEN) ) {
+ dev->stats.rx_length_errors++;
+ eth16i_reset(dev);
+ return;
+ }
+ else {
+ eth16i_skip_packet(dev);
+ dev->stats.rx_dropped++;
+ }
+ }
+ else { /* Ok so now we should have a good packet */
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(pkt_len + 3);
+ if( skb == NULL ) {
+ printk(KERN_WARNING "%s: Could'n allocate memory for packet (len %d)\n",
+ dev->name, pkt_len);
+ eth16i_skip_packet(dev);
+ dev->stats.rx_dropped++;
+ break;
+ }
+
+ skb_reserve(skb,2);
+
+ /*
+ Now let's get the packet out of buffer.
+ size is (pkt_len + 1) >> 1, cause we are now reading words
+ and it have to be even aligned.
+ */
+
+ if(ioaddr < 0x1000)
+ insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
+ (pkt_len + 1) >> 1);
+ else {
+ unsigned char *buf = skb_put(skb, pkt_len);
+ unsigned char frag = pkt_len % 4;
+
+ insl(ioaddr + DATAPORT, buf, pkt_len >> 2);
+
+ if(frag != 0) {
+ unsigned short rest[2];
+ rest[0] = inw( ioaddr + DATAPORT );
+ if(frag == 3)
+ rest[1] = inw( ioaddr + DATAPORT );
+
+ memcpy(buf + (pkt_len & 0xfffc), (char *)rest, frag);
+ }
+ }
+
+ skb->protocol=eth_type_trans(skb, dev);
+
+ if( eth16i_debug > 5 ) {
+ int i;
+ printk(KERN_DEBUG "%s: Received packet of length %d.\n",
+ dev->name, pkt_len);
+ for(i = 0; i < 14; i++)
+ printk(KERN_DEBUG " %02x", skb->data[i]);
+ printk(KERN_DEBUG ".\n");
+ }
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+
+ } /* else */
+
+ if(--boguscount <= 0)
+ break;
+
+ } /* while */
+}
+
+static irqreturn_t eth16i_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct eth16i_local *lp;
+ int ioaddr = 0, status;
+ int handled = 0;
+
+ ioaddr = dev->base_addr;
+ lp = netdev_priv(dev);
+
+ /* Turn off all interrupts from adapter */
+ outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
+
+ /* eth16i_tx won't be called */
+ spin_lock(&lp->lock);
+
+ status = inw(ioaddr + TX_STATUS_REG); /* Get the status */
+ outw(status, ioaddr + TX_STATUS_REG); /* Clear status bits */
+
+ if (status)
+ handled = 1;
+
+ if(eth16i_debug > 3)
+ printk(KERN_DEBUG "%s: Interrupt with status %04x.\n", dev->name, status);
+
+ if( status & 0x7f00 ) {
+
+ dev->stats.rx_errors++;
+
+ if(status & (BUS_RD_ERR << 8) )
+ printk(KERN_WARNING "%s: Bus read error.\n",dev->name);
+ if(status & (SHORT_PKT_ERR << 8) ) dev->stats.rx_length_errors++;
+ if(status & (ALIGN_ERR << 8) ) dev->stats.rx_frame_errors++;
+ if(status & (CRC_ERR << 8) ) dev->stats.rx_crc_errors++;
+ if(status & (RX_BUF_OVERFLOW << 8) ) dev->stats.rx_over_errors++;
+ }
+ if( status & 0x001a) {
+
+ dev->stats.tx_errors++;
+
+ if(status & CR_LOST) dev->stats.tx_carrier_errors++;
+ if(status & TX_JABBER_ERR) dev->stats.tx_window_errors++;
+
+#if 0
+ if(status & COLLISION) {
+ dev->stats.collisions +=
+ ((inb(ioaddr+TRANSMIT_MODE_REG) & 0xF0) >> 4);
+ }
+#endif
+ if(status & COLLISIONS_16) {
+ if(lp->col_16 < MAX_COL_16) {
+ lp->col_16++;
+ dev->stats.collisions++;
+ /* Resume transmitting, skip failed packet */
+ outb(0x02, ioaddr + COL_16_REG);
+ }
+ else {
+ printk(KERN_WARNING "%s: bailing out due to many consecutive 16-in-a-row collisions. Network cable problem?\n", dev->name);
+ }
+ }
+ }
+
+ if( status & 0x00ff ) { /* Let's check the transmit status reg */
+
+ if(status & TX_DONE) { /* The transmit has been done */
+ dev->stats.tx_packets = lp->tx_buffered_packets;
+ dev->stats.tx_bytes += lp->tx_buffered_bytes;
+ lp->col_16 = 0;
+
+ if(lp->tx_queue) { /* Is there still packets ? */
+ /* There was packet(s) so start transmitting and write also
+ how many packets there is to be sended */
+ outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ lp->tx_started = 1;
+ }
+ else {
+ lp->tx_started = 0;
+ }
+ netif_wake_queue(dev);
+ }
+ }
+
+ if( ( status & 0x8000 ) ||
+ ( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) ) {
+ eth16i_rx(dev); /* We have packet in receive buffer */
+ }
+
+ /* Turn interrupts back on */
+ outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
+
+ if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
+ /* There is still more room for one more packet in tx buffer */
+ netif_wake_queue(dev);
+ }
+
+ spin_unlock(&lp->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static void eth16i_skip_packet(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ inw(ioaddr + DATAPORT);
+ inw(ioaddr + DATAPORT);
+ inw(ioaddr + DATAPORT);
+
+ outb(SKIP_RX_PACKET, ioaddr + FILTER_SELF_RX_REG);
+ while( inb( ioaddr + FILTER_SELF_RX_REG ) != 0);
+}
+
+static void eth16i_reset(struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "%s: Resetting device.\n", dev->name);
+
+ BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
+ outw(0xffff, ioaddr + TX_STATUS_REG);
+ eth16i_select_regbank(2, ioaddr);
+
+ lp->tx_started = 0;
+ lp->tx_buf_busy = 0;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
+}
+
+static void eth16i_multicast(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
+ {
+ outb(3, ioaddr + RECEIVE_MODE_REG);
+ } else {
+ outb(2, ioaddr + RECEIVE_MODE_REG);
+ }
+}
+
+static void eth16i_select_regbank(unsigned char banknbr, int ioaddr)
+{
+ unsigned char data;
+
+ data = inb(ioaddr + CONFIG_REG_1);
+ outb( ((data & 0xF3) | ( (banknbr & 0x03) << 2)), ioaddr + CONFIG_REG_1);
+}
+
+#ifdef MODULE
+
+static ushort eth16i_parse_mediatype(const char* s)
+{
+ if(!s)
+ return E_PORT_FROM_EPROM;
+
+ if (!strncmp(s, "bnc", 3))
+ return E_PORT_BNC;
+ else if (!strncmp(s, "tp", 2))
+ return E_PORT_TP;
+ else if (!strncmp(s, "dix", 3))
+ return E_PORT_DIX;
+ else if (!strncmp(s, "auto", 4))
+ return E_PORT_AUTO;
+ else
+ return E_PORT_FROM_EPROM;
+}
+
+#define MAX_ETH16I_CARDS 4 /* Max number of Eth16i cards per module */
+
+static struct net_device *dev_eth16i[MAX_ETH16I_CARDS];
+static int io[MAX_ETH16I_CARDS];
+#if 0
+static int irq[MAX_ETH16I_CARDS];
+#endif
+static char* mediatype[MAX_ETH16I_CARDS];
+static int debug = -1;
+
+MODULE_AUTHOR("Mika Kuoppala <miku@iki.fi>");
+MODULE_DESCRIPTION("ICL EtherTeam 16i/32 driver");
+MODULE_LICENSE("GPL");
+
+
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "eth16i I/O base address(es)");
+
+#if 0
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(irq, "eth16i interrupt request number");
+#endif
+
+module_param_array(mediatype, charp, NULL, 0);
+MODULE_PARM_DESC(mediatype, "eth16i media type of interface(s) (bnc,tp,dix,auto,eprom)");
+
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "eth16i debug level (0-6)");
+
+int __init init_module(void)
+{
+ int this_dev, found = 0;
+ struct net_device *dev;
+
+ for (this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) {
+ dev = alloc_etherdev(sizeof(struct eth16i_local));
+ if (!dev)
+ break;
+
+ dev->base_addr = io[this_dev];
+
+ if(debug != -1)
+ eth16i_debug = debug;
+
+ if(eth16i_debug > 1)
+ printk(KERN_NOTICE "eth16i(%d): interface type %s\n", this_dev, mediatype[this_dev] ? mediatype[this_dev] : "none" );
+
+ dev->if_port = eth16i_parse_mediatype(mediatype[this_dev]);
+
+ if(io[this_dev] == 0) {
+ if (this_dev != 0) { /* Only autoprobe 1st one */
+ free_netdev(dev);
+ break;
+ }
+
+ printk(KERN_NOTICE "eth16i.c: Presently autoprobing (not recommended) for a single card.\n");
+ }
+
+ if (do_eth16i_probe(dev) == 0) {
+ dev_eth16i[found++] = dev;
+ continue;
+ }
+ printk(KERN_WARNING "eth16i.c No Eth16i card found (i/o = 0x%x).\n",
+ io[this_dev]);
+ free_netdev(dev);
+ break;
+ }
+ if (found)
+ return 0;
+ return -ENXIO;
+}
+
+void __exit cleanup_module(void)
+{
+ int this_dev;
+
+ for(this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) {
+ struct net_device *dev = dev_eth16i[this_dev];
+
+ if (netdev_priv(dev)) {
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr, ETH16I_IO_EXTENT);
+ free_netdev(dev);
+ }
+ }
+}
+#endif /* MODULE */
diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
new file mode 100644
index 000000000000..723815e7a997
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -0,0 +1,1187 @@
+/*======================================================================
+ fmvj18x_cs.c 2.8 2002/03/23
+
+ A fmvj18x (and its compatibles) PCMCIA client driver
+
+ Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp
+
+ TDK LAK-CD021 and CONTEC C-NET(PC)C support added by
+ Nobuhiro Katayama, kata-n@po.iijnet.or.jp
+
+ The PCMCIA client code is based on code written by David Hinds.
+ Network code is based on the "FMV-18x driver" by Yutaka TAMIYA
+ but is actually largely Donald Becker's AT1700 driver, which
+ carries the following attribution:
+
+ Written 1993-94 by Donald Becker.
+
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+======================================================================*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME "fmvj18x_cs"
+#define DRV_VERSION "2.9"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/crc32.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver");
+MODULE_LICENSE("GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+/* SRAM configuration */
+/* 0:4KB*2 TX buffer else:8KB*2 TX buffer */
+INT_MODULE_PARM(sram_config, 0);
+
+
+/*====================================================================*/
+/*
+ PCMCIA event handlers
+ */
+static int fmvj18x_config(struct pcmcia_device *link);
+static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id);
+static int fmvj18x_setup_mfc(struct pcmcia_device *link);
+static void fmvj18x_release(struct pcmcia_device *link);
+static void fmvj18x_detach(struct pcmcia_device *p_dev);
+
+/*
+ LAN controller(MBH86960A) specific routines
+ */
+static int fjn_config(struct net_device *dev, struct ifmap *map);
+static int fjn_open(struct net_device *dev);
+static int fjn_close(struct net_device *dev);
+static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t fjn_interrupt(int irq, void *dev_id);
+static void fjn_rx(struct net_device *dev);
+static void fjn_reset(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static void fjn_tx_timeout(struct net_device *dev);
+static const struct ethtool_ops netdev_ethtool_ops;
+
+/*
+ card type
+ */
+typedef enum { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN,
+ XXX10304, NEC, KME
+} cardtype_t;
+
+/*
+ driver specific data structure
+*/
+typedef struct local_info_t {
+ struct pcmcia_device *p_dev;
+ long open_time;
+ uint tx_started:1;
+ uint tx_queue;
+ u_short tx_queue_len;
+ cardtype_t cardtype;
+ u_short sent;
+ u_char __iomem *base;
+} local_info_t;
+
+#define MC_FILTERBREAK 64
+
+/*====================================================================*/
+/*
+ ioport offset from the base address
+ */
+#define TX_STATUS 0 /* transmit status register */
+#define RX_STATUS 1 /* receive status register */
+#define TX_INTR 2 /* transmit interrupt mask register */
+#define RX_INTR 3 /* receive interrupt mask register */
+#define TX_MODE 4 /* transmit mode register */
+#define RX_MODE 5 /* receive mode register */
+#define CONFIG_0 6 /* configuration register 0 */
+#define CONFIG_1 7 /* configuration register 1 */
+
+#define NODE_ID 8 /* node ID register (bank 0) */
+#define MAR_ADR 8 /* multicast address registers (bank 1) */
+
+#define DATAPORT 8 /* buffer mem port registers (bank 2) */
+#define TX_START 10 /* transmit start register */
+#define COL_CTRL 11 /* 16 collision control register */
+#define BMPR12 12 /* reserved */
+#define BMPR13 13 /* reserved */
+#define RX_SKIP 14 /* skip received packet register */
+
+#define LAN_CTRL 16 /* LAN card control register */
+
+#define MAC_ID 0x1a /* hardware address */
+#define UNGERMANN_MAC_ID 0x18 /* UNGERMANN-BASS hardware address */
+
+/*
+ control bits
+ */
+#define ENA_TMT_OK 0x80
+#define ENA_TMT_REC 0x20
+#define ENA_COL 0x04
+#define ENA_16_COL 0x02
+#define ENA_TBUS_ERR 0x01
+
+#define ENA_PKT_RDY 0x80
+#define ENA_BUS_ERR 0x40
+#define ENA_LEN_ERR 0x08
+#define ENA_ALG_ERR 0x04
+#define ENA_CRC_ERR 0x02
+#define ENA_OVR_FLO 0x01
+
+/* flags */
+#define F_TMT_RDY 0x80 /* can accept new packet */
+#define F_NET_BSY 0x40 /* carrier is detected */
+#define F_TMT_OK 0x20 /* send packet successfully */
+#define F_SRT_PKT 0x10 /* short packet error */
+#define F_COL_ERR 0x04 /* collision error */
+#define F_16_COL 0x02 /* 16 collision error */
+#define F_TBUS_ERR 0x01 /* bus read error */
+
+#define F_PKT_RDY 0x80 /* packet(s) in buffer */
+#define F_BUS_ERR 0x40 /* bus read error */
+#define F_LEN_ERR 0x08 /* short packet */
+#define F_ALG_ERR 0x04 /* frame error */
+#define F_CRC_ERR 0x02 /* CRC error */
+#define F_OVR_FLO 0x01 /* overflow error */
+
+#define F_BUF_EMP 0x40 /* receive buffer is empty */
+
+#define F_SKP_PKT 0x05 /* drop packet in buffer */
+
+/* default bitmaps */
+#define D_TX_INTR ( ENA_TMT_OK )
+#define D_RX_INTR ( ENA_PKT_RDY | ENA_LEN_ERR \
+ | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO )
+#define TX_STAT_M ( F_TMT_RDY )
+#define RX_STAT_M ( F_PKT_RDY | F_LEN_ERR \
+ | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO )
+
+/* commands */
+#define D_TX_MODE 0x06 /* no tests, detect carrier */
+#define ID_MATCHED 0x02 /* (RX_MODE) */
+#define RECV_ALL 0x03 /* (RX_MODE) */
+#define CONFIG0_DFL 0x5a /* 16bit bus, 4K x 2 Tx queues */
+#define CONFIG0_DFL_1 0x5e /* 16bit bus, 8K x 2 Tx queues */
+#define CONFIG0_RST 0xda /* Data Link Controller off (CONFIG_0) */
+#define CONFIG0_RST_1 0xde /* Data Link Controller off (CONFIG_0) */
+#define BANK_0 0xa0 /* bank 0 (CONFIG_1) */
+#define BANK_1 0xa4 /* bank 1 (CONFIG_1) */
+#define BANK_2 0xa8 /* bank 2 (CONFIG_1) */
+#define CHIP_OFF 0x80 /* contrl chip power off (CONFIG_1) */
+#define DO_TX 0x80 /* do transmit packet */
+#define SEND_PKT 0x81 /* send a packet */
+#define AUTO_MODE 0x07 /* Auto skip packet on 16 col detected */
+#define MANU_MODE 0x03 /* Stop and skip packet on 16 col */
+#define TDK_AUTO_MODE 0x47 /* Auto skip packet on 16 col detected */
+#define TDK_MANU_MODE 0x43 /* Stop and skip packet on 16 col */
+#define INTR_OFF 0x0d /* LAN controller ignores interrupts */
+#define INTR_ON 0x1d /* LAN controller will catch interrupts */
+
+#define TX_TIMEOUT ((400*HZ)/1000)
+
+#define BANK_0U 0x20 /* bank 0 (CONFIG_1) */
+#define BANK_1U 0x24 /* bank 1 (CONFIG_1) */
+#define BANK_2U 0x28 /* bank 2 (CONFIG_1) */
+
+static const struct net_device_ops fjn_netdev_ops = {
+ .ndo_open = fjn_open,
+ .ndo_stop = fjn_close,
+ .ndo_start_xmit = fjn_start_xmit,
+ .ndo_tx_timeout = fjn_tx_timeout,
+ .ndo_set_config = fjn_config,
+ .ndo_set_multicast_list = set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int fmvj18x_probe(struct pcmcia_device *link)
+{
+ local_info_t *lp;
+ struct net_device *dev;
+
+ dev_dbg(&link->dev, "fmvj18x_attach()\n");
+
+ /* Make up a FMVJ18x specific data structure */
+ dev = alloc_etherdev(sizeof(local_info_t));
+ if (!dev)
+ return -ENOMEM;
+ lp = netdev_priv(dev);
+ link->priv = dev;
+ lp->p_dev = link;
+ lp->base = NULL;
+
+ /* The io structure describes IO port mapping */
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+
+ /* General socket configuration */
+ link->config_flags |= CONF_ENABLE_IRQ;
+
+ dev->netdev_ops = &fjn_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+
+ return fmvj18x_config(link);
+} /* fmvj18x_attach */
+
+/*====================================================================*/
+
+static void fmvj18x_detach(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ dev_dbg(&link->dev, "fmvj18x_detach\n");
+
+ unregister_netdev(dev);
+
+ fmvj18x_release(link);
+
+ free_netdev(dev);
+} /* fmvj18x_detach */
+
+/*====================================================================*/
+
+static int mfc_try_io_port(struct pcmcia_device *link)
+{
+ int i, ret;
+ static const unsigned int serial_base[5] =
+ { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+
+ for (i = 0; i < 5; i++) {
+ link->resource[1]->start = serial_base[i];
+ link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ if (link->resource[1]->start == 0) {
+ link->resource[1]->end = 0;
+ pr_notice("out of resource for serial\n");
+ }
+ ret = pcmcia_request_io(link);
+ if (ret == 0)
+ return ret;
+ }
+ return ret;
+}
+
+static int ungermann_try_io_port(struct pcmcia_device *link)
+{
+ int ret;
+ unsigned int ioaddr;
+ /*
+ Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360
+ 0x380,0x3c0 only for ioport.
+ */
+ for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
+ link->resource[0]->start = ioaddr;
+ ret = pcmcia_request_io(link);
+ if (ret == 0) {
+ /* calculate ConfigIndex value */
+ link->config_index =
+ ((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
+ return ret;
+ }
+ }
+ return ret; /* RequestIO failed */
+}
+
+static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
+{
+ return 0; /* strange, but that's what the code did already before... */
+}
+
+static int fmvj18x_config(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ local_info_t *lp = netdev_priv(dev);
+ int i, ret;
+ unsigned int ioaddr;
+ cardtype_t cardtype;
+ char *card_name = "unknown";
+ u8 *buf;
+ size_t len;
+ u_char buggybuf[32];
+
+ dev_dbg(&link->dev, "fmvj18x_config\n");
+
+ link->io_lines = 5;
+
+ len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
+ kfree(buf);
+
+ if (len) {
+ /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
+ ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
+ if (ret != 0)
+ goto failed;
+
+ switch (link->manf_id) {
+ case MANFID_TDK:
+ cardtype = TDK;
+ if (link->card_id == PRODID_TDK_GN3410 ||
+ link->card_id == PRODID_TDK_NP9610 ||
+ link->card_id == PRODID_TDK_MN3200) {
+ /* MultiFunction Card */
+ link->config_base = 0x800;
+ link->config_index = 0x47;
+ link->resource[1]->end = 8;
+ }
+ break;
+ case MANFID_NEC:
+ cardtype = NEC; /* MultiFunction Card */
+ link->config_base = 0x800;
+ link->config_index = 0x47;
+ link->resource[1]->end = 8;
+ break;
+ case MANFID_KME:
+ cardtype = KME; /* MultiFunction Card */
+ link->config_base = 0x800;
+ link->config_index = 0x47;
+ link->resource[1]->end = 8;
+ break;
+ case MANFID_CONTEC:
+ cardtype = CONTEC;
+ break;
+ case MANFID_FUJITSU:
+ if (link->config_base == 0x0fe0)
+ cardtype = MBH10302;
+ else if (link->card_id == PRODID_FUJITSU_MBH10302)
+ /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
+ but these are MBH10304 based card. */
+ cardtype = MBH10304;
+ else if (link->card_id == PRODID_FUJITSU_MBH10304)
+ cardtype = MBH10304;
+ else
+ cardtype = LA501;
+ break;
+ default:
+ cardtype = MBH10304;
+ }
+ } else {
+ /* old type card */
+ switch (link->manf_id) {
+ case MANFID_FUJITSU:
+ if (link->card_id == PRODID_FUJITSU_MBH10304) {
+ cardtype = XXX10304; /* MBH10304 with buggy CIS */
+ link->config_index = 0x20;
+ } else {
+ cardtype = MBH10302; /* NextCom NC5310, etc. */
+ link->config_index = 1;
+ }
+ break;
+ case MANFID_UNGERMANN:
+ cardtype = UNGERMANN;
+ break;
+ default:
+ cardtype = MBH10302;
+ link->config_index = 1;
+ }
+ }
+
+ if (link->resource[1]->end != 0) {
+ ret = mfc_try_io_port(link);
+ if (ret != 0) goto failed;
+ } else if (cardtype == UNGERMANN) {
+ ret = ungermann_try_io_port(link);
+ if (ret != 0) goto failed;
+ } else {
+ ret = pcmcia_request_io(link);
+ if (ret)
+ goto failed;
+ }
+ ret = pcmcia_request_irq(link, fjn_interrupt);
+ if (ret)
+ goto failed;
+ ret = pcmcia_enable_device(link);
+ if (ret)
+ goto failed;
+
+ dev->irq = link->irq;
+ dev->base_addr = link->resource[0]->start;
+
+ if (resource_size(link->resource[1]) != 0) {
+ ret = fmvj18x_setup_mfc(link);
+ if (ret != 0) goto failed;
+ }
+
+ ioaddr = dev->base_addr;
+
+ /* Reset controller */
+ if (sram_config == 0)
+ outb(CONFIG0_RST, ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
+ /* Power On chip and select bank 0 */
+ if (cardtype == MBH10302)
+ outb(BANK_0, ioaddr + CONFIG_1);
+ else
+ outb(BANK_0U, ioaddr + CONFIG_1);
+
+ /* Set hardware address */
+ switch (cardtype) {
+ case MBH10304:
+ case TDK:
+ case LA501:
+ case CONTEC:
+ case NEC:
+ case KME:
+ if (cardtype == MBH10304) {
+ card_name = "FMV-J182";
+
+ len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
+ if (len < 11) {
+ kfree(buf);
+ goto failed;
+ }
+ /* Read MACID from CIS */
+ for (i = 5; i < 11; i++)
+ dev->dev_addr[i] = buf[i];
+ kfree(buf);
+ } else {
+ if (pcmcia_get_mac_from_cis(link, dev))
+ goto failed;
+ if( cardtype == TDK ) {
+ card_name = "TDK LAK-CD021";
+ } else if( cardtype == LA501 ) {
+ card_name = "LA501";
+ } else if( cardtype == NEC ) {
+ card_name = "PK-UG-J001";
+ } else if( cardtype == KME ) {
+ card_name = "Panasonic";
+ } else {
+ card_name = "C-NET(PC)C";
+ }
+ }
+ break;
+ case UNGERMANN:
+ /* Read MACID from register */
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i);
+ card_name = "Access/CARD";
+ break;
+ case XXX10304:
+ /* Read MACID from Buggy CIS */
+ if (fmvj18x_get_hwinfo(link, buggybuf) == -1) {
+ pr_notice("unable to read hardware net address\n");
+ goto failed;
+ }
+ for (i = 0 ; i < 6; i++) {
+ dev->dev_addr[i] = buggybuf[i];
+ }
+ card_name = "FMV-J182";
+ break;
+ case MBH10302:
+ default:
+ /* Read MACID from register */
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = inb(ioaddr + MAC_ID + i);
+ card_name = "FMV-J181";
+ break;
+ }
+
+ lp->cardtype = cardtype;
+ SET_NETDEV_DEV(dev, &link->dev);
+
+ if (register_netdev(dev) != 0) {
+ pr_notice("register_netdev() failed\n");
+ goto failed;
+ }
+
+ /* print current configuration */
+ netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n",
+ card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
+ dev->base_addr, dev->irq, dev->dev_addr);
+
+ return 0;
+
+failed:
+ fmvj18x_release(link);
+ return -ENODEV;
+} /* fmvj18x_config */
+/*====================================================================*/
+
+static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
+{
+ u_char __iomem *base;
+ int i, j;
+
+ /* Allocate a small memory window */
+ link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+ link->resource[2]->start = 0; link->resource[2]->end = 0;
+ i = pcmcia_request_window(link, link->resource[2], 0);
+ if (i != 0)
+ return -1;
+
+ base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
+ pcmcia_map_mem_page(link, link->resource[2], 0);
+
+ /*
+ * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
+ * 22 0d xx xx xx 04 06 yy yy yy yy yy yy ff
+ * 'xx' is garbage.
+ * 'yy' is MAC address.
+ */
+ for (i = 0; i < 0x200; i++) {
+ if (readb(base+i*2) == 0x22) {
+ if (readb(base+(i-1)*2) == 0xff &&
+ readb(base+(i+5)*2) == 0x04 &&
+ readb(base+(i+6)*2) == 0x06 &&
+ readb(base+(i+13)*2) == 0xff)
+ break;
+ }
+ }
+
+ if (i != 0x200) {
+ for (j = 0 ; j < 6; j++,i++) {
+ node_id[j] = readb(base+(i+7)*2);
+ }
+ }
+
+ iounmap(base);
+ j = pcmcia_release_window(link, link->resource[2]);
+ return (i != 0x200) ? 0 : -1;
+
+} /* fmvj18x_get_hwinfo */
+/*====================================================================*/
+
+static int fmvj18x_setup_mfc(struct pcmcia_device *link)
+{
+ int i;
+ struct net_device *dev = link->priv;
+ unsigned int ioaddr;
+ local_info_t *lp = netdev_priv(dev);
+
+ /* Allocate a small memory window */
+ link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+ link->resource[3]->start = link->resource[3]->end = 0;
+ i = pcmcia_request_window(link, link->resource[3], 0);
+ if (i != 0)
+ return -1;
+
+ lp->base = ioremap(link->resource[3]->start,
+ resource_size(link->resource[3]));
+ if (lp->base == NULL) {
+ netdev_notice(dev, "ioremap failed\n");
+ return -1;
+ }
+
+ i = pcmcia_map_mem_page(link, link->resource[3], 0);
+ if (i != 0) {
+ iounmap(lp->base);
+ lp->base = NULL;
+ return -1;
+ }
+
+ ioaddr = dev->base_addr;
+ writeb(0x47, lp->base+0x800); /* Config Option Register of LAN */
+ writeb(0x0, lp->base+0x802); /* Config and Status Register */
+
+ writeb(ioaddr & 0xff, lp->base+0x80a); /* I/O Base(Low) of LAN */
+ writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */
+
+ writeb(0x45, lp->base+0x820); /* Config Option Register of Modem */
+ writeb(0x8, lp->base+0x822); /* Config and Status Register */
+
+ return 0;
+
+}
+/*====================================================================*/
+
+static void fmvj18x_release(struct pcmcia_device *link)
+{
+
+ struct net_device *dev = link->priv;
+ local_info_t *lp = netdev_priv(dev);
+ u_char __iomem *tmp;
+
+ dev_dbg(&link->dev, "fmvj18x_release\n");
+
+ if (lp->base != NULL) {
+ tmp = lp->base;
+ lp->base = NULL; /* set NULL before iounmap */
+ iounmap(tmp);
+ }
+
+ pcmcia_disable_device(link);
+
+}
+
+static int fmvj18x_suspend(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->open)
+ netif_device_detach(dev);
+
+ return 0;
+}
+
+static int fmvj18x_resume(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->open) {
+ fjn_reset(dev);
+ netif_device_attach(dev);
+ }
+
+ return 0;
+}
+
+/*====================================================================*/
+
+static const struct pcmcia_device_id fmvj18x_ids[] = {
+ PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
+ PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
+ PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922),
+ PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922),
+ PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db),
+ PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e),
+ PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2),
+ PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4),
+ PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0 ", 0x8cef4d3a, 0x075fc7b6),
+ PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0 ", 0x8cef4d3a, 0xbccf43e6),
+ PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666),
+ PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70),
+ PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a),
+ PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2),
+ PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304 ES", 0x2599f454),
+ PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
+ PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
+ PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
+ PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05),
+ PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
+ PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
+
+static struct pcmcia_driver fmvj18x_cs_driver = {
+ .owner = THIS_MODULE,
+ .name = "fmvj18x_cs",
+ .probe = fmvj18x_probe,
+ .remove = fmvj18x_detach,
+ .id_table = fmvj18x_ids,
+ .suspend = fmvj18x_suspend,
+ .resume = fmvj18x_resume,
+};
+
+static int __init init_fmvj18x_cs(void)
+{
+ return pcmcia_register_driver(&fmvj18x_cs_driver);
+}
+
+static void __exit exit_fmvj18x_cs(void)
+{
+ pcmcia_unregister_driver(&fmvj18x_cs_driver);
+}
+
+module_init(init_fmvj18x_cs);
+module_exit(exit_fmvj18x_cs);
+
+/*====================================================================*/
+
+static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ local_info_t *lp = netdev_priv(dev);
+ unsigned int ioaddr;
+ unsigned short tx_stat, rx_stat;
+
+ ioaddr = dev->base_addr;
+
+ /* avoid multiple interrupts */
+ outw(0x0000, ioaddr + TX_INTR);
+
+ /* wait for a while */
+ udelay(1);
+
+ /* get status */
+ tx_stat = inb(ioaddr + TX_STATUS);
+ rx_stat = inb(ioaddr + RX_STATUS);
+
+ /* clear status */
+ outb(tx_stat, ioaddr + TX_STATUS);
+ outb(rx_stat, ioaddr + RX_STATUS);
+
+ pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
+ pr_debug(" tx_status %02x.\n", tx_stat);
+
+ if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
+ /* there is packet(s) in rx buffer */
+ fjn_rx(dev);
+ }
+ if (tx_stat & F_TMT_RDY) {
+ dev->stats.tx_packets += lp->sent ;
+ lp->sent = 0 ;
+ if (lp->tx_queue) {
+ outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
+ lp->sent = lp->tx_queue ;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ dev->trans_start = jiffies;
+ } else {
+ lp->tx_started = 0;
+ }
+ netif_wake_queue(dev);
+ }
+ pr_debug("%s: exiting interrupt,\n", dev->name);
+ pr_debug(" tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
+
+ outb(D_TX_INTR, ioaddr + TX_INTR);
+ outb(D_RX_INTR, ioaddr + RX_INTR);
+
+ if (lp->base != NULL) {
+ /* Ack interrupt for multifunction card */
+ writeb(0x01, lp->base+0x802);
+ writeb(0x09, lp->base+0x822);
+ }
+
+ return IRQ_HANDLED;
+
+} /* fjn_interrupt */
+
+/*====================================================================*/
+
+static void fjn_tx_timeout(struct net_device *dev)
+{
+ struct local_info_t *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+
+ netdev_notice(dev, "transmit timed out with status %04x, %s?\n",
+ htons(inw(ioaddr + TX_STATUS)),
+ inb(ioaddr + TX_STATUS) & F_TMT_RDY
+ ? "IRQ conflict" : "network cable problem");
+ netdev_notice(dev, "timeout registers: %04x %04x %04x "
+ "%04x %04x %04x %04x %04x.\n",
+ htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)),
+ htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)),
+ htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)),
+ htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14)));
+ dev->stats.tx_errors++;
+ /* ToDo: We should try to restart the adaptor... */
+ local_irq_disable();
+ fjn_reset(dev);
+
+ lp->tx_started = 0;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ lp->sent = 0;
+ lp->open_time = jiffies;
+ local_irq_enable();
+ netif_wake_queue(dev);
+}
+
+static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct local_info_t *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+ short length = skb->len;
+
+ if (length < ETH_ZLEN)
+ {
+ if (skb_padto(skb, ETH_ZLEN))
+ return NETDEV_TX_OK;
+ length = ETH_ZLEN;
+ }
+
+ netif_stop_queue(dev);
+
+ {
+ unsigned char *buf = skb->data;
+
+ if (length > ETH_FRAME_LEN) {
+ netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n",
+ length);
+ return NETDEV_TX_BUSY;
+ }
+
+ netdev_dbg(dev, "Transmitting a packet of length %lu\n",
+ (unsigned long)skb->len);
+ dev->stats.tx_bytes += skb->len;
+
+ /* Disable both interrupts. */
+ outw(0x0000, ioaddr + TX_INTR);
+
+ /* wait for a while */
+ udelay(1);
+
+ outw(length, ioaddr + DATAPORT);
+ outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
+
+ lp->tx_queue++;
+ lp->tx_queue_len += ((length+3) & ~1);
+
+ if (lp->tx_started == 0) {
+ /* If the Tx is idle, always trigger a transmit. */
+ outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
+ lp->sent = lp->tx_queue ;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ lp->tx_started = 1;
+ netif_start_queue(dev);
+ } else {
+ if( sram_config == 0 ) {
+ if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) )
+ /* Yes, there is room for one more packet. */
+ netif_start_queue(dev);
+ } else {
+ if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) &&
+ lp->tx_queue < 127 )
+ /* Yes, there is room for one more packet. */
+ netif_start_queue(dev);
+ }
+ }
+
+ /* Re-enable interrupts */
+ outb(D_TX_INTR, ioaddr + TX_INTR);
+ outb(D_RX_INTR, ioaddr + RX_INTR);
+ }
+ dev_kfree_skb (skb);
+
+ return NETDEV_TX_OK;
+} /* fjn_start_xmit */
+
+/*====================================================================*/
+
+static void fjn_reset(struct net_device *dev)
+{
+ struct local_info_t *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+ int i;
+
+ netdev_dbg(dev, "fjn_reset() called\n");
+
+ /* Reset controller */
+ if( sram_config == 0 )
+ outb(CONFIG0_RST, ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
+ /* Power On chip and select bank 0 */
+ if (lp->cardtype == MBH10302)
+ outb(BANK_0, ioaddr + CONFIG_1);
+ else
+ outb(BANK_0U, ioaddr + CONFIG_1);
+
+ /* Set Tx modes */
+ outb(D_TX_MODE, ioaddr + TX_MODE);
+ /* set Rx modes */
+ outb(ID_MATCHED, ioaddr + RX_MODE);
+
+ /* Set hardware address */
+ for (i = 0; i < 6; i++)
+ outb(dev->dev_addr[i], ioaddr + NODE_ID + i);
+
+ /* (re)initialize the multicast table */
+ set_rx_mode(dev);
+
+ /* Switch to bank 2 (runtime mode) */
+ if (lp->cardtype == MBH10302)
+ outb(BANK_2, ioaddr + CONFIG_1);
+ else
+ outb(BANK_2U, ioaddr + CONFIG_1);
+
+ /* set 16col ctrl bits */
+ if( lp->cardtype == TDK || lp->cardtype == CONTEC)
+ outb(TDK_AUTO_MODE, ioaddr + COL_CTRL);
+ else
+ outb(AUTO_MODE, ioaddr + COL_CTRL);
+
+ /* clear Reserved Regs */
+ outb(0x00, ioaddr + BMPR12);
+ outb(0x00, ioaddr + BMPR13);
+
+ /* reset Skip packet reg. */
+ outb(0x01, ioaddr + RX_SKIP);
+
+ /* Enable Tx and Rx */
+ if( sram_config == 0 )
+ outb(CONFIG0_DFL, ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_DFL_1, ioaddr + CONFIG_0);
+
+ /* Init receive pointer ? */
+ inw(ioaddr + DATAPORT);
+ inw(ioaddr + DATAPORT);
+
+ /* Clear all status */
+ outb(0xff, ioaddr + TX_STATUS);
+ outb(0xff, ioaddr + RX_STATUS);
+
+ if (lp->cardtype == MBH10302)
+ outb(INTR_OFF, ioaddr + LAN_CTRL);
+
+ /* Turn on Rx interrupts */
+ outb(D_TX_INTR, ioaddr + TX_INTR);
+ outb(D_RX_INTR, ioaddr + RX_INTR);
+
+ /* Turn on interrupts from LAN card controller */
+ if (lp->cardtype == MBH10302)
+ outb(INTR_ON, ioaddr + LAN_CTRL);
+} /* fjn_reset */
+
+/*====================================================================*/
+
+static void fjn_rx(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ int boguscount = 10; /* 5 -> 10: by agy 19940922 */
+
+ pr_debug("%s: in rx_packet(), rx_status %02x.\n",
+ dev->name, inb(ioaddr + RX_STATUS));
+
+ while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
+ u_short status = inw(ioaddr + DATAPORT);
+
+ netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n",
+ inb(ioaddr + RX_MODE), status);
+#ifndef final_version
+ if (status == 0) {
+ outb(F_SKP_PKT, ioaddr + RX_SKIP);
+ break;
+ }
+#endif
+ if ((status & 0xF0) != 0x20) { /* There was an error. */
+ dev->stats.rx_errors++;
+ if (status & F_LEN_ERR) dev->stats.rx_length_errors++;
+ if (status & F_ALG_ERR) dev->stats.rx_frame_errors++;
+ if (status & F_CRC_ERR) dev->stats.rx_crc_errors++;
+ if (status & F_OVR_FLO) dev->stats.rx_over_errors++;
+ } else {
+ u_short pkt_len = inw(ioaddr + DATAPORT);
+ /* Malloc up new buffer. */
+ struct sk_buff *skb;
+
+ if (pkt_len > 1550) {
+ netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n",
+ pkt_len);
+ outb(F_SKP_PKT, ioaddr + RX_SKIP);
+ dev->stats.rx_errors++;
+ break;
+ }
+ skb = dev_alloc_skb(pkt_len+2);
+ if (skb == NULL) {
+ netdev_notice(dev, "Memory squeeze, dropping packet (len %d)\n",
+ pkt_len);
+ outb(F_SKP_PKT, ioaddr + RX_SKIP);
+ dev->stats.rx_dropped++;
+ break;
+ }
+
+ skb_reserve(skb, 2);
+ insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
+ (pkt_len + 1) >> 1);
+ skb->protocol = eth_type_trans(skb, dev);
+
+ {
+ int i;
+ pr_debug("%s: Rxed packet of length %d: ",
+ dev->name, pkt_len);
+ for (i = 0; i < 14; i++)
+ pr_debug(" %02x", skb->data[i]);
+ pr_debug(".\n");
+ }
+
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+ }
+ if (--boguscount <= 0)
+ break;
+ }
+
+ /* If any worth-while packets have been received, dev_rint()
+ has done a netif_wake_queue() for us and will work on them
+ when we get to the bottom-half routine. */
+/*
+ if (lp->cardtype != TDK) {
+ int i;
+ for (i = 0; i < 20; i++) {
+ if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP)
+ break;
+ (void)inw(ioaddr + DATAPORT); /+ dummy status read +/
+ outb(F_SKP_PKT, ioaddr + RX_SKIP);
+ }
+
+ if (i > 0)
+ pr_debug("%s: Exint Rx packet with mode %02x after "
+ "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
+ }
+*/
+} /* fjn_rx */
+
+/*====================================================================*/
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+};
+
+static int fjn_config(struct net_device *dev, struct ifmap *map){
+ return 0;
+}
+
+static int fjn_open(struct net_device *dev)
+{
+ struct local_info_t *lp = netdev_priv(dev);
+ struct pcmcia_device *link = lp->p_dev;
+
+ pr_debug("fjn_open('%s').\n", dev->name);
+
+ if (!pcmcia_dev_present(link))
+ return -ENODEV;
+
+ link->open++;
+
+ fjn_reset(dev);
+
+ lp->tx_started = 0;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ lp->open_time = jiffies;
+ netif_start_queue(dev);
+
+ return 0;
+} /* fjn_open */
+
+/*====================================================================*/
+
+static int fjn_close(struct net_device *dev)
+{
+ struct local_info_t *lp = netdev_priv(dev);
+ struct pcmcia_device *link = lp->p_dev;
+ unsigned int ioaddr = dev->base_addr;
+
+ pr_debug("fjn_close('%s').\n", dev->name);
+
+ lp->open_time = 0;
+ netif_stop_queue(dev);
+
+ /* Set configuration register 0 to disable Tx and Rx. */
+ if( sram_config == 0 )
+ outb(CONFIG0_RST ,ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0);
+
+ /* Update the statistics -- ToDo. */
+
+ /* Power-down the chip. Green, green, green! */
+ outb(CHIP_OFF ,ioaddr + CONFIG_1);
+
+ /* Set the ethernet adaptor disable IRQ */
+ if (lp->cardtype == MBH10302)
+ outb(INTR_OFF, ioaddr + LAN_CTRL);
+
+ link->open--;
+
+ return 0;
+} /* fjn_close */
+
+/*====================================================================*/
+
+/*
+ Set the multicast/promiscuous mode for this adaptor.
+*/
+
+static void set_rx_mode(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ u_char mc_filter[8]; /* Multicast hash filter */
+ u_long flags;
+ int i;
+
+ int saved_bank;
+ int saved_config_0 = inb(ioaddr + CONFIG_0);
+
+ local_irq_save(flags);
+
+ /* Disable Tx and Rx */
+ if (sram_config == 0)
+ outb(CONFIG0_RST, ioaddr + CONFIG_0);
+ else
+ outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
+ if (dev->flags & IFF_PROMISC) {
+ memset(mc_filter, 0xff, sizeof(mc_filter));
+ outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */
+ } else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to filter perfectly -- accept all multicasts. */
+ memset(mc_filter, 0xff, sizeof(mc_filter));
+ outb(2, ioaddr + RX_MODE); /* Use normal mode. */
+ } else if (netdev_mc_empty(dev)) {
+ memset(mc_filter, 0x00, sizeof(mc_filter));
+ outb(1, ioaddr + RX_MODE); /* Ignore almost all multicasts. */
+ } else {
+ struct netdev_hw_addr *ha;
+
+ memset(mc_filter, 0, sizeof(mc_filter));
+ netdev_for_each_mc_addr(ha, dev) {
+ unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26;
+ mc_filter[bit >> 3] |= (1 << (bit & 7));
+ }
+ outb(2, ioaddr + RX_MODE); /* Use normal mode. */
+ }
+
+ /* Switch to bank 1 and set the multicast table. */
+ saved_bank = inb(ioaddr + CONFIG_1);
+ outb(0xe4, ioaddr + CONFIG_1);
+
+ for (i = 0; i < 8; i++)
+ outb(mc_filter[i], ioaddr + MAR_ADR + i);
+ outb(saved_bank, ioaddr + CONFIG_1);
+
+ outb(saved_config_0, ioaddr + CONFIG_0);
+
+ local_irq_restore(flags);
+}