summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/fm10k
diff options
context:
space:
mode:
authorJacob Keller <jacob.e.keller@intel.com>2016-06-07 16:08:51 -0700
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2016-07-20 15:22:12 -0700
commit94877768cfaa99f7b3757f29632faa5945f18872 (patch)
tree37e9aa4651febb2ff39f9a5b2487d195edfc459a /drivers/net/ethernet/intel/fm10k
parent106ca42356b49a1ae6199e6630ec40df82ff7421 (diff)
fm10k: wait for queues to drain if stop_hw() fails once
It turns out that sometimes during a reset the Tx queues will be temporarily stuck longer than .stop_hw() expects. Work around this issue by attempting to .stop_hw() first. If it tails, wait a number of attempts until the Tx queues appear to be drained. After this, attempt stop_hw() again. This ensures that we avoid waiting if we don't need to, such as during the first initialization of a VF, and give the proper amount of time necessary to recover from most situations. It is possible that the hardware is actually stuck. For PFs, this is usually fixed by a datapath reset. Unfortunately the VF cannot request a similar reset for itself. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/fm10k')
-rw-r--r--drivers/net/ethernet/intel/fm10k/fm10k.h1
-rw-r--r--drivers/net/ethernet/intel/fm10k/fm10k_main.c2
-rw-r--r--drivers/net/ethernet/intel/fm10k/fm10k_pci.c44
3 files changed, 40 insertions, 7 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h
index c8d0817766bf..c4cf08dcf5af 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k.h
+++ b/drivers/net/ethernet/intel/fm10k/fm10k.h
@@ -458,6 +458,7 @@ __be16 fm10k_tx_encap_offload(struct sk_buff *skb);
netdev_tx_t fm10k_xmit_frame_ring(struct sk_buff *skb,
struct fm10k_ring *tx_ring);
void fm10k_tx_timeout_reset(struct fm10k_intfc *interface);
+u64 fm10k_get_tx_pending(struct fm10k_ring *ring);
bool fm10k_check_tx_hang(struct fm10k_ring *tx_ring);
void fm10k_alloc_rx_buffers(struct fm10k_ring *rx_ring, u16 cleaned_count);
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
index c6a464551577..c85fc98945fa 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
@@ -1128,7 +1128,7 @@ static u64 fm10k_get_tx_completed(struct fm10k_ring *ring)
return ring->stats.packets;
}
-static u64 fm10k_get_tx_pending(struct fm10k_ring *ring)
+u64 fm10k_get_tx_pending(struct fm10k_ring *ring)
{
struct fm10k_intfc *interface = ring->q_vector->interface;
struct fm10k_hw *hw = &interface->hw;
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index 4dfd1284a8de..7c9b20c6b6c1 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -1613,7 +1613,7 @@ void fm10k_down(struct fm10k_intfc *interface)
{
struct net_device *netdev = interface->netdev;
struct fm10k_hw *hw = &interface->hw;
- int err;
+ int err, i = 0, count = 0;
/* signal that we are down to the interrupt handler and service task */
if (test_and_set_bit(__FM10K_DOWN, &interface->state))
@@ -1629,9 +1629,6 @@ void fm10k_down(struct fm10k_intfc *interface)
/* reset Rx filters */
fm10k_reset_rx_state(interface);
- /* allow 10ms for device to quiesce */
- usleep_range(10000, 20000);
-
/* disable polling routines */
fm10k_napi_disable_all(interface);
@@ -1642,11 +1639,46 @@ void fm10k_down(struct fm10k_intfc *interface)
while (test_and_set_bit(__FM10K_UPDATING_STATS, &interface->state))
usleep_range(1000, 2000);
+ /* skip waiting for TX DMA if we lost PCIe link */
+ if (FM10K_REMOVED(hw->hw_addr))
+ goto skip_tx_dma_drain;
+
+ /* In some rare circumstances it can take a while for Tx queues to
+ * quiesce and be fully disabled. Attempt to .stop_hw() first, and
+ * then if we get ERR_REQUESTS_PENDING, go ahead and wait in a loop
+ * until the Tx queues have emptied, or until a number of retries. If
+ * we fail to clear within the retry loop, we will issue a warning
+ * indicating that Tx DMA is probably hung. Note this means we call
+ * .stop_hw() twice but this shouldn't cause any problems.
+ */
+ err = hw->mac.ops.stop_hw(hw);
+ if (err != FM10K_ERR_REQUESTS_PENDING)
+ goto skip_tx_dma_drain;
+
+#define TX_DMA_DRAIN_RETRIES 25
+ for (count = 0; count < TX_DMA_DRAIN_RETRIES; count++) {
+ usleep_range(10000, 20000);
+
+ /* start checking at the last ring to have pending Tx */
+ for (; i < interface->num_tx_queues; i++)
+ if (fm10k_get_tx_pending(interface->tx_ring[i]))
+ break;
+
+ /* if all the queues are drained, we can break now */
+ if (i == interface->num_tx_queues)
+ break;
+ }
+
+ if (count >= TX_DMA_DRAIN_RETRIES)
+ dev_err(&interface->pdev->dev,
+ "Tx queues failed to drain after %d tries. Tx DMA is probably hung.\n",
+ count);
+skip_tx_dma_drain:
/* Disable DMA engine for Tx/Rx */
err = hw->mac.ops.stop_hw(hw);
if (err == FM10K_ERR_REQUESTS_PENDING)
- dev_info(&interface->pdev->dev,
- "due to pending requests hw was not shut down gracefully\n");
+ dev_err(&interface->pdev->dev,
+ "due to pending requests hw was not shut down gracefully\n");
else if (err)
dev_err(&interface->pdev->dev, "stop_hw failed: %d\n", err);