Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix PCI IDs of 9000 series iwlwifi devices, from Luca Coelho.

 2) bpf offload bug fixes from Jakub Kicinski.

 3) Fix bpf verifier to NOP out code which is dead at run time because
    due to branch pruning the verifier will not explore such
    instructions. From Alexei Starovoitov.

 4) Fix crash when deleting secondary chains in packet scheduler
    classifier. From Roman Kapl.

 5) Fix buffer management bugs in smc, from Ursula Braun.

 6) Fix regression in anycast route handling, from David Ahern.

 7) Fix link settings regression in r8169, from Tobias Jakobi.

 8) Add back enough UFO support so that live migration still works, from
    Willem de Bruijn.

 9) Linearize enough packet data for the full extent to which the ipvlan
    code will inspect the packet headers, from Gao Feng.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
  ipvlan: Fix insufficient skb linear check for ipv6 icmp
  ipvlan: Fix insufficient skb linear check for arp
  geneve: only configure or fill UDP_ZERO_CSUM6_RX/TX info when CONFIG_IPV6
  net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY
  net: accept UFO datagrams from tuntap and packet
  net: realtek: r8169: implement set_link_ksettings()
  net: ipv6: Fixup device for anycast routes during copy
  net/smc: Fix preinitialization of buf_desc in __smc_buf_create()
  net/smc: use sk_rcvbuf as start for rmb creation
  ipv6: Do not consider linkdown nexthops during multipath
  net: sched: fix crash when deleting secondary chains
  net: phy: cortina: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
  bpf: fix branch pruning logic
  bpf: change bpf_perf_event_output arg5 type to ARG_CONST_SIZE_OR_ZERO
  bpf: change bpf_probe_read_str arg2 type to ARG_CONST_SIZE_OR_ZERO
  bpf: remove explicit handling of 0 for arg2 in bpf_probe_read
  bpf: introduce ARG_PTR_TO_MEM_OR_NULL
  i40evf: Use smp_rmb rather than read_barrier_depends
  fm10k: Use smp_rmb rather than read_barrier_depends
  igb: Use smp_rmb rather than read_barrier_depends
  ...

1 files changed, 84 insertions, 81 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 4a964d6e4a9e..4c08cc86463e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2167,6 +2167,73 @@ i40e_aqc_broadcast_filter(struct i40e_vsi *vsi, const char *vsi_name,
 }
 
 /**
+ * i40e_set_promiscuous - set promiscuous mode
+ * @pf: board private structure
+ * @promisc: promisc on or off
+ *
+ * There are different ways of setting promiscuous mode on a PF depending on
+ * what state/environment we're in.  This identifies and sets it appropriately.
+ * Returns 0 on success.
+ **/
+static int i40e_set_promiscuous(struct i40e_pf *pf, bool promisc)
+{
+	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
+	struct i40e_hw *hw = &pf->hw;
+	i40e_status aq_ret;
+
+	if (vsi->type == I40E_VSI_MAIN &&
+	    pf->lan_veb != I40E_NO_VEB &&
+	    !(pf->flags & I40E_FLAG_MFP_ENABLED)) {
+		/* set defport ON for Main VSI instead of true promisc
+		 * this way we will get all unicast/multicast and VLAN
+		 * promisc behavior but will not get VF or VMDq traffic
+		 * replicated on the Main VSI.
+		 */
+		if (promisc)
+			aq_ret = i40e_aq_set_default_vsi(hw,
+							 vsi->seid,
+							 NULL);
+		else
+			aq_ret = i40e_aq_clear_default_vsi(hw,
+							   vsi->seid,
+							   NULL);
+		if (aq_ret) {
+			dev_info(&pf->pdev->dev,
+				 "Set default VSI failed, err %s, aq_err %s\n",
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
+		}
+	} else {
+		aq_ret = i40e_aq_set_vsi_unicast_promiscuous(
+						  hw,
+						  vsi->seid,
+						  promisc, NULL,
+						  true);
+		if (aq_ret) {
+			dev_info(&pf->pdev->dev,
+				 "set unicast promisc failed, err %s, aq_err %s\n",
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
+		}
+		aq_ret = i40e_aq_set_vsi_multicast_promiscuous(
+						  hw,
+						  vsi->seid,
+						  promisc, NULL);
+		if (aq_ret) {
+			dev_info(&pf->pdev->dev,
+				 "set multicast promisc failed, err %s, aq_err %s\n",
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
+		}
+	}
+
+	if (!aq_ret)
+		pf->cur_promisc = promisc;
+
+	return aq_ret;
+}
+
+/**
  * i40e_sync_vsi_filters - Update the VSI filter list to the HW
  * @vsi: ptr to the VSI
  *
@@ -2467,81 +2534,16 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
 		cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) ||
 			       test_bit(__I40E_VSI_OVERFLOW_PROMISC,
 					vsi->state));
-		if ((vsi->type == I40E_VSI_MAIN) &&
-		    (pf->lan_veb != I40E_NO_VEB) &&
-		    !(pf->flags & I40E_FLAG_MFP_ENABLED)) {
-			/* set defport ON for Main VSI instead of true promisc
-			 * this way we will get all unicast/multicast and VLAN
-			 * promisc behavior but will not get VF or VMDq traffic
-			 * replicated on the Main VSI.
-			 */
-			if (pf->cur_promisc != cur_promisc) {
-				pf->cur_promisc = cur_promisc;
-				if (cur_promisc)
-					aq_ret =
-					      i40e_aq_set_default_vsi(hw,
-								      vsi->seid,
-								      NULL);
-				else
-					aq_ret =
-					    i40e_aq_clear_default_vsi(hw,
-								      vsi->seid,
-								      NULL);
-				if (aq_ret) {
-					retval = i40e_aq_rc_to_posix(aq_ret,
-							hw->aq.asq_last_status);
-					dev_info(&pf->pdev->dev,
-						 "Set default VSI failed on %s, err %s, aq_err %s\n",
-						 vsi_name,
-						 i40e_stat_str(hw, aq_ret),
-						 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
-				}
-			}
-		} else {
-			aq_ret = i40e_aq_set_vsi_unicast_promiscuous(
-							  hw,
-							  vsi->seid,
-							  cur_promisc, NULL,
-							  true);
-			if (aq_ret) {
-				retval =
-				i40e_aq_rc_to_posix(aq_ret,
-						    hw->aq.asq_last_status);
-				dev_info(&pf->pdev->dev,
-					 "set unicast promisc failed on %s, err %s, aq_err %s\n",
-					 vsi_name,
-					 i40e_stat_str(hw, aq_ret),
-					 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
-			}
-			aq_ret = i40e_aq_set_vsi_multicast_promiscuous(
-							  hw,
-							  vsi->seid,
-							  cur_promisc, NULL);
-			if (aq_ret) {
-				retval =
-				i40e_aq_rc_to_posix(aq_ret,
-						    hw->aq.asq_last_status);
-				dev_info(&pf->pdev->dev,
-					 "set multicast promisc failed on %s, err %s, aq_err %s\n",
-					 vsi_name,
-					 i40e_stat_str(hw, aq_ret),
-					 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
-			}
-		}
-		aq_ret = i40e_aq_set_vsi_broadcast(&vsi->back->hw,
-						   vsi->seid,
-						   cur_promisc, NULL);
+		aq_ret = i40e_set_promiscuous(pf, cur_promisc);
 		if (aq_ret) {
 			retval = i40e_aq_rc_to_posix(aq_ret,
-						     pf->hw.aq.asq_last_status);
+						     hw->aq.asq_last_status);
 			dev_info(&pf->pdev->dev,
-				 "set brdcast promisc failed, err %s, aq_err %s\n",
-					 i40e_stat_str(hw, aq_ret),
-					 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
+				 "Setting promiscuous %s failed on %s, err %s aq_err %s\n",
+				 cur_promisc ? "on" : "off",
+				 vsi_name,
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
 		}
 	}
 out:
@@ -3964,7 +3966,7 @@ static bool i40e_clean_fdir_tx_irq(struct i40e_ring *tx_ring, int budget)
 			break;
 
 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();
 
 		/* if the descriptor isn't done, no work yet to do */
 		if (!(eop_desc->cmd_type_offset_bsz &
@@ -5629,14 +5631,6 @@ static int i40e_validate_num_queues(struct i40e_pf *pf, int num_queues,
 		return -EINVAL;
 
 	*reconfig_rss = false;
-
-	if (num_queues > I40E_MAX_QUEUES_PER_CH) {
-		dev_err(&pf->pdev->dev,
-			"Failed to create VMDq VSI. User requested num_queues (%d) > I40E_MAX_QUEUES_PER_VSI (%u)\n",
-			num_queues, I40E_MAX_QUEUES_PER_CH);
-		return -EINVAL;
-	}
-
 	if (vsi->current_rss_size) {
 		if (num_queues > vsi->current_rss_size) {
 			dev_dbg(&pf->pdev->dev,
@@ -9429,6 +9423,15 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	if (!lock_acquired)
 		rtnl_unlock();
 
+	/* Restore promiscuous settings */
+	ret = i40e_set_promiscuous(pf, pf->cur_promisc);
+	if (ret)
+		dev_warn(&pf->pdev->dev,
+			 "Failed to restore promiscuous setting: %s, err %s aq_err %s\n",
+			 pf->cur_promisc ? "on" : "off",
+			 i40e_stat_str(&pf->hw, ret),
+			 i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+
 	i40e_reset_all_vfs(pf, true);
 
 	/* tell the firmware that we're starting */