diff options
| author | Todd Fujinaka <todd.fujinaka@intel.com> | 2014-07-10 01:47:15 -0700 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2014-07-10 01:48:28 -0700 |
| commit | 948264879b6894dc389a44b99fae4f0b72932619 (patch) | |
| tree | bcec9d0dd4a6ddca75038cbc44227fb25e05099e /drivers/net/ethernet/intel/igb/e1000_defines.h | |
| parent | b4df480f68ae03b5dd4ab0db56536fbcec741705 (diff) | |
igb: Workaround for i210 Errata 25: Slow System Clock
On some devices, the internal PLL circuit occasionally provides the
wrong clock frequency after power up. The probability of failure is less
than one failure per 1000 power cycles. When the failure occurs, the
internal clock frequency is around 1/20 of the correct frequency.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_defines.h')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_defines.h | 18 |
1 files changed, 10 insertions, 8 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 2a8bb35c2df2..217f8138851b 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -46,14 +46,15 @@ #define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */ /* Physical Func Reset Done Indication */ -#define E1000_CTRL_EXT_PFRSTD 0x00004000 -#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 -#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 -#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 -#define E1000_CTRL_EXT_EIAME 0x01000000 -#define E1000_CTRL_EXT_IRCA 0x00000001 +#define E1000_CTRL_EXT_PFRSTD 0x00004000 +#define E1000_CTRL_EXT_SDLPE 0X00040000 /* SerDes Low Power Enable */ +#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 +#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 +#define E1000_CTRL_EXT_EIAME 0x01000000 +#define E1000_CTRL_EXT_IRCA 0x00000001 /* Interrupt delay cancellation */ /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 @@ -62,6 +63,7 @@ /* packet buffer parity error detection enabled */ /* descriptor FIFO parity error detection enable */ #define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ +#define E1000_CTRL_EXT_PHYPDEN 0x00100000 #define E1000_I2CCMD_REG_ADDR_SHIFT 16 #define E1000_I2CCMD_PHY_ADDR_SHIFT 24 #define E1000_I2CCMD_OPCODE_READ 0x08000000 |