Merge branch 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/clock

Shawn Guo <shawn.guo@linaro.org> writes:

  mxs common clk porting for v3.5.  It depends on the following two branches.

  [1] git://git.linaro.org/people/mturquette/linux.git clk-next
  [2] http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git clkdev

  As the mxs device tree conversion will constantly touch clock files,
  to save the conflicts, the updated mxs/dt branch coming later will
  based on this pull-request.

* 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: remove now unused timer_clk argument from mxs_timer_init
  ARM: mxs: remove old clock support
  ARM: mxs: switch to common clk framework
  ARM: mxs: change the lookup name for fec phy clock
  ARM: mxs: request clock for timer
  clk: mxs: add clock support for imx28
  clk: mxs: add clock support for imx23
  clk: mxs: add mxs specific clocks

Includes an update to Linux 3.4-rc6

Conflicts:
	drivers/clk/Makefile

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 files changed, 94 insertions, 66 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 64c76443a7aa..b461c24945e3 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1310,10 +1310,6 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 
 		if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
 			oem_reg |= HV_OEM_BITS_LPLU;
-
-		/* Set Restart auto-neg to activate the bits */
-		if (!hw->phy.ops.check_reset_block(hw))
-			oem_reg |= HV_OEM_BITS_RESTART_AN;
 	} else {
 		if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE |
 			       E1000_PHY_CTRL_NOND0A_GBE_DISABLE))
@@ -1324,6 +1320,11 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 			oem_reg |= HV_OEM_BITS_LPLU;
 	}
 
+	/* Set Restart auto-neg to activate the bits */
+	if ((d0_state || (hw->mac.type != e1000_pchlan)) &&
+	    !hw->phy.ops.check_reset_block(hw))
+		oem_reg |= HV_OEM_BITS_RESTART_AN;
+
 	ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg);
 
 release:
@@ -3682,7 +3683,11 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
 
 	if (hw->mac.type >= e1000_pchlan) {
 		e1000_oem_bits_config_ich8lan(hw, false);
-		e1000_phy_hw_reset_ich8lan(hw);
+
+		/* Reset PHY to activate OEM bits on 82577/8 */
+		if (hw->mac.type == e1000_pchlan)
+			e1000e_phy_hw_reset_generic(hw);
+
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			return;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 19ab2154802c..9520a6ac1f30 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3799,7 +3799,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
 	/* fire an unusual interrupt on the test handler */
 	ew32(ICS, E1000_ICS_RXSEQ);
 	e1e_flush();
-	msleep(50);
+	msleep(100);
 
 	e1000_irq_disable(adapter);
 
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index ff796e42c3eb..16adeb9418a8 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -106,7 +106,7 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
 /*
  * Interrupt Throttle Rate (interrupts/sec)
  *
- * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+ * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative
  */
 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
 #define DEFAULT_ITR 3
@@ -344,53 +344,60 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 
 		if (num_InterruptThrottleRate > bd) {
 			adapter->itr = InterruptThrottleRate[bd];
-			switch (adapter->itr) {
-			case 0:
-				e_info("%s turned off\n", opt.name);
-				break;
-			case 1:
-				e_info("%s set to dynamic mode\n", opt.name);
-				adapter->itr_setting = adapter->itr;
-				adapter->itr = 20000;
-				break;
-			case 3:
-				e_info("%s set to dynamic conservative mode\n",
-					opt.name);
-				adapter->itr_setting = adapter->itr;
-				adapter->itr = 20000;
-				break;
-			case 4:
-				e_info("%s set to simplified (2000-8000 ints) "
-				       "mode\n", opt.name);
-				adapter->itr_setting = 4;
-				break;
-			default:
-				/*
-				 * Save the setting, because the dynamic bits
-				 * change itr.
-				 */
-				if (e1000_validate_option(&adapter->itr, &opt,
-							  adapter) &&
-				    (adapter->itr == 3)) {
-					/*
-					 * In case of invalid user value,
-					 * default to conservative mode.
-					 */
-					adapter->itr_setting = adapter->itr;
-					adapter->itr = 20000;
-				} else {
-					/*
-					 * Clear the lower two bits because
-					 * they are used as control.
-					 */
-					adapter->itr_setting =
-						adapter->itr & ~3;
-				}
-				break;
-			}
+
+			/*
+			 * Make sure a message is printed for non-special
+			 * values.  And in case of an invalid option, display
+			 * warning, use default and got through itr/itr_setting
+			 * adjustment logic below
+			 */
+			if ((adapter->itr > 4) &&
+			    e1000_validate_option(&adapter->itr, &opt, adapter))
+				adapter->itr = opt.def;
 		} else {
-			adapter->itr_setting = opt.def;
+			/*
+			 * If no option specified, use default value and go
+			 * through the logic below to adjust itr/itr_setting
+			 */
+			adapter->itr = opt.def;
+
+			/*
+			 * Make sure a message is printed for non-special
+			 * default values
+			 */
+			if (adapter->itr > 40)
+				e_info("%s set to default %d\n", opt.name,
+				       adapter->itr);
+		}
+
+		adapter->itr_setting = adapter->itr;
+		switch (adapter->itr) {
+		case 0:
+			e_info("%s turned off\n", opt.name);
+			break;
+		case 1:
+			e_info("%s set to dynamic mode\n", opt.name);
+			adapter->itr = 20000;
+			break;
+		case 3:
+			e_info("%s set to dynamic conservative mode\n",
+			       opt.name);
 			adapter->itr = 20000;
+			break;
+		case 4:
+			e_info("%s set to simplified (2000-8000 ints) mode\n",
+			       opt.name);
+			break;
+		default:
+			/*
+			 * Save the setting, because the dynamic bits
+			 * change itr.
+			 *
+			 * Clear the lower two bits because
+			 * they are used as control.
+			 */
+			adapter->itr_setting &= ~3;
+			break;
 		}
 	}
 	{ /* Interrupt Mode */
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index d61ca2a732f0..8ec74b07f940 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -2731,14 +2731,14 @@ static int __devinit igbvf_probe(struct pci_dev *pdev,
 			netdev->addr_len);
 	}
 
-	if (!is_valid_ether_addr(netdev->perm_addr)) {
+	if (!is_valid_ether_addr(netdev->dev_addr)) {
 		dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
 		        netdev->dev_addr);
 		err = -EIO;
 		goto err_hw_init;
 	}
 
-	memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
+	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
 
 	setup_timer(&adapter->watchdog_timer, &igbvf_watchdog,
 	            (unsigned long) adapter);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index 77ea4b716535..bc07933d67da 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -437,6 +437,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
 	 */
 	if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) &&
 	    (fctl & FC_FC_END_SEQ)) {
+		skb_linearize(skb);
 		crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc));
 		crc->fcoe_eof = FC_EOF_T;
 	}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index 027d7a75be39..ed1b47dc0834 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -622,6 +622,16 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, int v_idx,
 		if (adapter->hw.mac.type == ixgbe_mac_82599EB)
 			set_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state);
 
+#ifdef IXGBE_FCOE
+		if (adapter->netdev->features & NETIF_F_FCOE_MTU) {
+			struct ixgbe_ring_feature *f;
+			f = &adapter->ring_feature[RING_F_FCOE];
+			if ((rxr_idx >= f->mask) &&
+			    (rxr_idx < f->mask + f->indices))
+				set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state);
+		}
+
+#endif /* IXGBE_FCOE */
 		/* apply Rx specific ring traits */
 		ring->count = adapter->rx_ring_count;
 		ring->queue_index = rxr_idx;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 3e26b1f9ac75..88f6b2e9b72d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3154,14 +3154,6 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
 			set_ring_rsc_enabled(rx_ring);
 		else
 			clear_ring_rsc_enabled(rx_ring);
-#ifdef IXGBE_FCOE
-		if (netdev->features & NETIF_F_FCOE_MTU) {
-			struct ixgbe_ring_feature *f;
-			f = &adapter->ring_feature[RING_F_FCOE];
-			if ((i >= f->mask) && (i < f->mask + f->indices))
-				set_bit(__IXGBE_RX_FCOE_BUFSZ, &rx_ring->state);
-		}
-#endif /* IXGBE_FCOE */
 	}
 }
 
@@ -4836,7 +4828,9 @@ static int ixgbe_resume(struct pci_dev *pdev)
 
 	pci_wake_from_d3(pdev, false);
 
+	rtnl_lock();
 	err = ixgbe_init_interrupt_scheme(adapter);
+	rtnl_unlock();
 	if (err) {
 		e_dev_err("Cannot initialize interrupts for device\n");
 		return err;
@@ -4879,10 +4873,6 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 	}
 
 	ixgbe_clear_interrupt_scheme(adapter);
-#ifdef CONFIG_DCB
-	kfree(adapter->ixgbe_ieee_pfc);
-	kfree(adapter->ixgbe_ieee_ets);
-#endif
 
 #ifdef CONFIG_PM
 	retval = pci_save_state(pdev);
@@ -4893,6 +4883,16 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 	if (wufc) {
 		ixgbe_set_rx_mode(netdev);
 
+		/*
+		 * enable the optics for both mult-speed fiber and
+		 * 82599 SFP+ fiber as we can WoL.
+		 */
+		if (hw->mac.ops.enable_tx_laser &&
+		    (hw->phy.multispeed_fiber ||
+		    (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber &&
+		     hw->mac.type == ixgbe_mac_82599EB)))
+			hw->mac.ops.enable_tx_laser(hw);
+
 		/* turn on all-multi mode if wake on multicast is enabled */
 		if (wufc & IXGBE_WUFC_MC) {
 			fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
@@ -7220,6 +7220,11 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 
 	ixgbe_release_hw_control(adapter);
 
+#ifdef CONFIG_DCB
+	kfree(adapter->ixgbe_ieee_pfc);
+	kfree(adapter->ixgbe_ieee_ets);
+
+#endif
 	iounmap(adapter->hw.hw_addr);
 	pci_release_selected_regions(pdev, pci_select_bars(pdev,
 				     IORESOURCE_MEM));