octeontx2-af: cn10k: Bandwidth profiles config support

CN10K silicons supports hierarchial ingress packet ratelimiting.
There are 3 levels of profilers supported leaf, mid and top.
Ratelimiting is done after packet forwarding decision is taken
and a NIXLF's RQ is identified to DMA the packet. RQ's context
points to a leaf bandwidth profile which can be configured
to achieve desired ratelimit.

This patch adds logic for management of these bandwidth profiles
ie profile alloc, free, context update etc.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 39 insertions, 1 deletions

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index aee6a6f31b0d..7d7dfa8d8a3f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -260,7 +260,11 @@ M(NIX_BP_DISABLE,	0x8017, nix_bp_disable, nix_bp_cfg_req, msg_rsp) \
 M(NIX_GET_MAC_ADDR, 0x8018, nix_get_mac_addr, msg_req, nix_get_mac_addr_rsp) \
 M(NIX_CN10K_AQ_ENQ,	0x8019, nix_cn10k_aq_enq, nix_cn10k_aq_enq_req, \
 				nix_cn10k_aq_enq_rsp)			\
-M(NIX_GET_HW_INFO,	0x801a, nix_get_hw_info, msg_req, nix_hw_info)
+M(NIX_GET_HW_INFO,	0x801c, nix_get_hw_info, msg_req, nix_hw_info)	\
+M(NIX_BANDPROF_ALLOC,	0x801d, nix_bandprof_alloc, nix_bandprof_alloc_req, \
+				nix_bandprof_alloc_rsp)			    \
+M(NIX_BANDPROF_FREE,	0x801e, nix_bandprof_free, nix_bandprof_free_req,   \
+				msg_rsp)
 
 /* Messages initiated by AF (range 0xC00 - 0xDFF) */
 #define MBOX_UP_CGX_MESSAGES						\
@@ -615,6 +619,9 @@ enum nix_af_status {
 	NIX_AF_ERR_PTP_CONFIG_FAIL  = -423,
 	NIX_AF_ERR_NPC_KEY_NOT_SUPP = -424,
 	NIX_AF_ERR_INVALID_NIXBLK   = -425,
+	NIX_AF_ERR_INVALID_BANDPROF = -426,
+	NIX_AF_ERR_IPOLICER_NOTSUPP = -427,
+	NIX_AF_ERR_BANDPROF_INVAL_REQ  = -428,
 };
 
 /* For NIX RX vtag action  */
@@ -683,6 +690,7 @@ struct nix_cn10k_aq_enq_req {
 		struct nix_cq_ctx_s cq;
 		struct nix_rsse_s   rss;
 		struct nix_rx_mce_s mce;
+		struct nix_bandprof_s prof;
 	};
 	union {
 		struct nix_cn10k_rq_ctx_s rq_mask;
@@ -690,6 +698,7 @@ struct nix_cn10k_aq_enq_req {
 		struct nix_cq_ctx_s cq_mask;
 		struct nix_rsse_s   rss_mask;
 		struct nix_rx_mce_s mce_mask;
+		struct nix_bandprof_s prof_mask;
 	};
 };
 
@@ -701,6 +710,7 @@ struct nix_cn10k_aq_enq_rsp {
 		struct nix_cq_ctx_s cq;
 		struct nix_rsse_s   rss;
 		struct nix_rx_mce_s mce;
+		struct nix_bandprof_s prof;
 	};
 };
 
@@ -716,6 +726,7 @@ struct nix_aq_enq_req {
 		struct nix_cq_ctx_s cq;
 		struct nix_rsse_s   rss;
 		struct nix_rx_mce_s mce;
+		u64 prof;
 	};
 	union {
 		struct nix_rq_ctx_s rq_mask;
@@ -723,6 +734,7 @@ struct nix_aq_enq_req {
 		struct nix_cq_ctx_s cq_mask;
 		struct nix_rsse_s   rss_mask;
 		struct nix_rx_mce_s mce_mask;
+		u64 prof_mask;
 	};
 };
 
@@ -734,6 +746,7 @@ struct nix_aq_enq_rsp {
 		struct nix_cq_ctx_s cq;
 		struct nix_rsse_s   rss;
 		struct nix_rx_mce_s mce;
+		u64 prof;
 	};
 };
 
@@ -975,6 +988,31 @@ struct nix_hw_info {
 	u16 min_mtu;
 };
 
+struct nix_bandprof_alloc_req {
+	struct mbox_msghdr hdr;
+	/* Count of profiles needed per layer */
+	u16 prof_count[BAND_PROF_NUM_LAYERS];
+};
+
+struct nix_bandprof_alloc_rsp {
+	struct mbox_msghdr hdr;
+	u16 prof_count[BAND_PROF_NUM_LAYERS];
+
+	/* There is no need to allocate morethan 1 bandwidth profile
+	 * per RQ of a PF_FUNC's NIXLF. So limit the maximum
+	 * profiles to 64 per PF_FUNC.
+	 */
+#define MAX_BANDPROF_PER_PFFUNC	64
+	u16 prof_idx[BAND_PROF_NUM_LAYERS][MAX_BANDPROF_PER_PFFUNC];
+};
+
+struct nix_bandprof_free_req {
+	struct mbox_msghdr hdr;
+	u8 free_all;
+	u16 prof_count[BAND_PROF_NUM_LAYERS];
+	u16 prof_idx[BAND_PROF_NUM_LAYERS][MAX_BANDPROF_PER_PFFUNC];
+};
+
 /* NPC mbox message structs */
 
 #define NPC_MCAM_ENTRY_INVALID	0xFFFF