diff options
| author | René van Dorst <opensource@vdorst.com> | 2019-08-25 19:43:40 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2019-08-27 20:19:27 -0700 |
| commit | 7e538372694b3e449783eed3981d59d2597c2882 (patch) | |
| tree | 9bf928677a0dd882a474f87f35f04380402949ec /drivers/net/ethernet/mediatek/mtk_eth_soc.h | |
| parent | b8fc9f30821ec0ca018b3716fbed55ab6910a8f1 (diff) | |
net: ethernet: mediatek: Re-add support SGMII
* Re-add SGMII support but now with PHYLINK API support
So the SGMII changes are more clear
* Move SGMII block setup from mtk_gmac_sgmii_path_setup() to
mtk_mac_config()
* Merge mtk_setup_hw_path() into mtk_mac_config()
* Remove mediatek,physpeed property, fixed-link supports now any speed so
speed = <2500>; is now valid with PHYLINK
* Demagic SGMII register values
* Use phylink state to setup fixed-link mode
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/mediatek/mtk_eth_soc.h')
| -rw-r--r-- | drivers/net/ethernet/mediatek/mtk_eth_soc.h | 37 |
1 files changed, 33 insertions, 4 deletions
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index 7f5f541daad7..76bd12cb8150 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -412,14 +412,38 @@ /* Register to auto-negotiation restart */ #define SGMSYS_PCS_CONTROL_1 0x0 #define SGMII_AN_RESTART BIT(9) +#define SGMII_ISOLATE BIT(10) +#define SGMII_AN_ENABLE BIT(12) +#define SGMII_LINK_STATYS BIT(18) +#define SGMII_AN_ABILITY BIT(19) +#define SGMII_AN_COMPLETE BIT(21) +#define SGMII_PCS_FAULT BIT(23) +#define SGMII_AN_EXPANSION_CLR BIT(30) /* Register to programmable link timer, the unit in 2 * 8ns */ #define SGMSYS_PCS_LINK_TIMER 0x18 #define SGMII_LINK_TIMER_DEFAULT (0x186a0 & GENMASK(19, 0)) /* Register to control remote fault */ -#define SGMSYS_SGMII_MODE 0x20 -#define SGMII_REMOTE_FAULT_DIS BIT(8) +#define SGMSYS_SGMII_MODE 0x20 +#define SGMII_IF_MODE_BIT0 BIT(0) +#define SGMII_SPEED_DUPLEX_AN BIT(1) +#define SGMII_SPEED_10 0x0 +#define SGMII_SPEED_100 BIT(2) +#define SGMII_SPEED_1000 BIT(3) +#define SGMII_DUPLEX_FULL BIT(4) +#define SGMII_IF_MODE_BIT5 BIT(5) +#define SGMII_REMOTE_FAULT_DIS BIT(8) +#define SGMII_CODE_SYNC_SET_VAL BIT(9) +#define SGMII_CODE_SYNC_SET_EN BIT(10) +#define SGMII_SEND_AN_ERROR_EN BIT(11) +#define SGMII_IF_MODE_MASK GENMASK(5, 1) + +/* Register to set SGMII speed, ANA RG_ Control Signals III*/ +#define SGMSYS_ANA_RG_CS3 0x2028 +#define RG_PHY_SPEED_MASK (BIT(2) | BIT(3)) +#define RG_PHY_SPEED_1_25G 0x0 +#define RG_PHY_SPEED_3_125G BIT(2) /* Register to power up QPHY */ #define SGMSYS_QPHY_PWR_STATE_CTRL 0xe8 @@ -897,7 +921,12 @@ u32 mtk_r32(struct mtk_eth *eth, unsigned reg); int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *np, u32 ana_rgc3); int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id); -int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id); -int mtk_setup_hw_path(struct mtk_eth *eth, int mac_id, int phymode); +int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id, + const struct phylink_link_state *state); +void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id); + +int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id); +int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id); +int mtk_gmac_rgmii_path_setup(struct mtk_eth *eth, int mac_id); #endif /* MTK_ETH_H */ |