net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues

When sending traffic to multiple ports with different link speeds, queued
packets to one port can drown out tx to other ports.
In order to better handle transmission to multiple ports, use the hardware
shaper feature to implement weighted fair queueing between ports.
Weight and maximum rate are automatically adjusted based on the link speed
of the port.
The first 3 queues are unrestricted and reserved for non-DSA direct tx on
GMAC ports. The following queues are automatically assigned by the MTK DSA
tag driver based on the target port number.
The PPE offload code configures the queues for offloaded traffic in the same
way.
This feature is only supported on devices supporting QDMA. All queues still
share the same DMA ring and descriptor pool.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221116080734.44013-5-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 24 insertions, 2 deletions

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index eaaa0c67ef2a..1581eba053ab 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -25,6 +25,7 @@
 #define MTK_MAX_DSA_PORTS	7
 #define MTK_DSA_PORT_MASK	GENMASK(2, 0)
 
+#define MTK_QDMA_NUM_QUEUES	16
 #define MTK_QDMA_PAGE_SIZE	2048
 #define MTK_MAX_RX_LENGTH	1536
 #define MTK_MAX_RX_LENGTH_2K	2048
@@ -210,8 +211,26 @@
 #define MTK_RING_MAX_AGG_CNT_H		((MTK_HW_LRO_MAX_AGG_CNT >> 6) & 0x3)
 
 /* QDMA TX Queue Configuration Registers */
+#define MTK_QTX_OFFSET		0x10
 #define QDMA_RES_THRES		4
 
+/* QDMA Tx Queue Scheduler Configuration Registers */
+#define MTK_QTX_SCH_TX_SEL		BIT(31)
+#define MTK_QTX_SCH_TX_SEL_V2		GENMASK(31, 30)
+
+#define MTK_QTX_SCH_LEAKY_BUCKET_EN	BIT(30)
+#define MTK_QTX_SCH_LEAKY_BUCKET_SIZE	GENMASK(29, 28)
+#define MTK_QTX_SCH_MIN_RATE_EN		BIT(27)
+#define MTK_QTX_SCH_MIN_RATE_MAN	GENMASK(26, 20)
+#define MTK_QTX_SCH_MIN_RATE_EXP	GENMASK(19, 16)
+#define MTK_QTX_SCH_MAX_RATE_WEIGHT	GENMASK(15, 12)
+#define MTK_QTX_SCH_MAX_RATE_EN		BIT(11)
+#define MTK_QTX_SCH_MAX_RATE_MAN	GENMASK(10, 4)
+#define MTK_QTX_SCH_MAX_RATE_EXP	GENMASK(3, 0)
+
+/* QDMA TX Scheduler Rate Control Register */
+#define MTK_QDMA_TX_SCH_MAX_WFQ		BIT(15)
+
 /* QDMA Global Configuration Register */
 #define MTK_RX_2B_OFFSET	BIT(31)
 #define MTK_RX_BT_32DWORDS	(3 << 11)
@@ -230,6 +249,7 @@
 #define MTK_WCOMP_EN		BIT(24)
 #define MTK_RESV_BUF		(0x40 << 16)
 #define MTK_MUTLI_CNT		(0x4 << 12)
+#define MTK_LEAKY_BUCKET_EN	BIT(11)
 
 /* QDMA Flow Control Register */
 #define FC_THRES_DROP_MODE	BIT(20)
@@ -258,8 +278,6 @@
 #define MTK_STAT_OFFSET		0x40
 
 /* QDMA TX NUM */
-#define MTK_QDMA_TX_NUM		16
-#define MTK_QDMA_TX_MASK	(MTK_QDMA_TX_NUM - 1)
 #define QID_BITS_V2(x)		(((x) & 0x3f) << 16)
 #define MTK_QDMA_GMAC2_QID	8
 
@@ -289,6 +307,7 @@
 #define TX_DMA_PLEN0(x)		(((x) & eth->soc->txrx.dma_max_len) << eth->soc->txrx.dma_len_offset)
 #define TX_DMA_PLEN1(x)		((x) & eth->soc->txrx.dma_max_len)
 #define TX_DMA_SWC		BIT(14)
+#define TX_DMA_PQID		GENMASK(3, 0)
 
 /* PDMA on MT7628 */
 #define TX_DMA_DONE		BIT(31)
@@ -947,6 +966,7 @@ struct mtk_reg_map {
 	} pdma;
 	struct {
 		u32	qtx_cfg;	/* tx queue configuration */
+		u32	qtx_sch;	/* tx queue scheduler configuration */
 		u32	rx_ptr;		/* rx base pointer */
 		u32	rx_cnt_cfg;	/* rx max count configuration */
 		u32	qcrx_ptr;	/* rx cpu pointer */
@@ -964,6 +984,7 @@ struct mtk_reg_map {
 		u32	fq_tail;	/* fq tail pointer */
 		u32	fq_count;	/* fq free page count */
 		u32	fq_blen;	/* fq free page buffer length */
+		u32	tx_sch_rate;	/* tx scheduler rate control registers */
 	} qdma;
 	u32	gdm1_cnt;
 	u32	gdma_to_ppe;
@@ -1157,6 +1178,7 @@ struct mtk_mac {
 	__be32				hwlro_ip[MTK_MAX_LRO_IP_CNT];
 	int				hwlro_ip_cnt;
 	unsigned int			syscfg0;
+	struct notifier_block		device_notifier;
 };
 
 /* the struct describing the SoC. these are declared in the soc_xyz.c files */