net/mlx5: Add cyc2time HW translation mode support

Device timestamp can be in real time mode (cycles to time translation is
offloaded into the Hardware). With real time mode, HW provides timestamp
which is already translated into nanoseconds.

With this mode, driver adjusts both the HW and timecounter (to keep
clock_info_page updated) using callbacks: adjfreq, adjtime and settime.
HW clock modifications are done via MTUTC access reg commands. Driver is
allowed to modify HW real time clock only if MCAM ptpcyc2realtime_modify
capability is set.

Add MTUTC set function to be used for configuring the HW real time
clock. Modify existing code to support both internal timer (with
conversion via timecounter_cyc2time() and real time (no conversions).

Align the signatures of the helpers converting from timestamp to
nanoseconds. With that, when allocating a queue assign the corresponding
callback with respect to the capability.

Adjust 1PPS timestamp calculation flows based on the timestamp mode.

Cyc2time offload brings two major advantages:
- Improve MTAE (Max Time Absolute Error) for HW TS by up to 160 ns over a
  100% loaded CPU.
- Faster data-path timestamp to nanoseconds, as translation is
  lock-less and done in HW.

On real time mode, timestamp format is 32 high bits of seconds and 32
low bits of nanoseconds. On some flows, driver shall convert this format
into nanoseconds wall-clock with REAL_TIME_TO_NS macro.

HW supports a single clock, and it is shared by all functions on a
device. In case real time clock is used, it is recommended to use
a single GM to all device's functions.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

1 files changed, 5 insertions, 2 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c
index 2a2bac30daaa..b1a2b1418803 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.c
@@ -3,7 +3,6 @@
 
 #include "en/ptp.h"
 #include "en/txrx.h"
-#include "lib/clock.h"
 
 struct mlx5e_skb_cb_hwtstamp {
 	ktime_t cqe_hwtstamp;
@@ -70,6 +69,7 @@ static void mlx5e_ptp_handle_ts_cqe(struct mlx5e_ptpsq *ptpsq,
 				    int budget)
 {
 	struct sk_buff *skb = mlx5e_skb_fifo_pop(&ptpsq->skb_fifo);
+	struct mlx5e_txqsq *sq = &ptpsq->txqsq;
 	ktime_t hwtstamp;
 
 	if (unlikely(MLX5E_RX_ERR_CQE(cqe))) {
@@ -77,7 +77,7 @@ static void mlx5e_ptp_handle_ts_cqe(struct mlx5e_ptpsq *ptpsq,
 		goto out;
 	}
 
-	hwtstamp = mlx5_timecounter_cyc2time(ptpsq->txqsq.clock, get_cqe_ts(cqe));
+	hwtstamp = mlx5e_cqe_ts_to_ns(sq->ptp_cyc2time, sq->clock, get_cqe_ts(cqe));
 	mlx5e_skb_cb_hwtstamp_handler(skb, MLX5E_SKB_CB_PORT_HWTSTAMP,
 				      hwtstamp, ptpsq->cq_stats);
 	ptpsq->cq_stats->cqe++;
@@ -183,6 +183,9 @@ static int mlx5e_ptp_alloc_txqsq(struct mlx5e_port_ptp *c, int txq_ix,
 	if (!MLX5_CAP_ETH(mdev, wqe_vlan_insert))
 		set_bit(MLX5E_SQ_STATE_VLAN_NEED_L2_INLINE, &sq->state);
 	sq->stop_room = param->stop_room;
+	sq->ptp_cyc2time = mlx5_is_real_time_sq(mdev) ?
+			   mlx5_real_time_cyc2time :
+			   mlx5_timecounter_cyc2time;
 
 	node = dev_to_node(mlx5_core_dma_dev(mdev));