treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

5 files changed, 25 insertions, 25 deletions

diff --git a/drivers/net/ethernet/mellanox/Kconfig b/drivers/net/ethernet/mellanox/Kconfig
index 23cf7917a0c9..ff6613a5cdd3 100644
--- a/drivers/net/ethernet/mellanox/Kconfig
+++ b/drivers/net/ethernet/mellanox/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_MELLANOX
 	bool "Mellanox devices"
 	default y
 	depends on PCI || I2C
-	---help---
+	help
 	  If you have a network (Ethernet or RDMA) device belonging to this
 	  class, say Y.
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig
index e69c3c31e701..400e611ba041 100644
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
@@ -8,7 +8,7 @@ config MLX4_EN
 	depends on PCI && NETDEVICES && ETHERNET && INET
 	select MLX4_CORE
 	imply PTP_1588_CLOCK
-	---help---
+	help
 	  This driver supports Mellanox Technologies ConnectX Ethernet
 	  devices.
 
@@ -16,7 +16,7 @@ config MLX4_EN_DCB
 	bool "Data Center Bridging (DCB) Support"
 	default y
 	depends on MLX4_EN && DCB
-	---help---
+	help
 	  Say Y here if you want to use Data Center Bridging (DCB) in the
 	  driver.
 	  If set to N, will not be able to configure QoS and ratelimit attributes.
@@ -34,7 +34,7 @@ config MLX4_DEBUG
 	bool "Verbose debugging output" if (MLX4_CORE && EXPERT)
 	depends on MLX4_CORE
 	default y
-	---help---
+	help
 	  This option causes debugging code to be compiled into the
 	  mlx4_core driver.  The output can be turned on via the
 	  debug_level module parameter (which can also be set after
@@ -44,6 +44,6 @@ config MLX4_CORE_GEN2
 	bool "Support for old gen2 Mellanox PCI IDs" if (MLX4_CORE)
 	depends on MLX4_CORE
 	default y
-	---help---
+	help
 	  Say Y here if you want to use old gen2 Mellanox devices in the
 	  driver.
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
index b6ffd1622cfd..4dfdbb82ea9d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
@@ -12,7 +12,7 @@ config MLX5_CORE
 	depends on PTP_1588_CLOCK || !PTP_1588_CLOCK
 	depends on PCI_HYPERV_INTERFACE || !PCI_HYPERV_INTERFACE
 	default n
-	---help---
+	help
 	  Core driver for low level functionality of the ConnectX-4 and
 	  Connect-IB cards by Mellanox Technologies.
 
@@ -23,7 +23,7 @@ config MLX5_FPGA
 	bool "Mellanox Technologies Innova support"
 	depends on MLX5_CORE
 	select MLX5_ACCEL
-	---help---
+	help
 	  Build support for the Innova family of network cards by Mellanox
 	  Technologies. Innova network cards are comprised of a ConnectX chip
 	  and an FPGA chip on one board. If you select this option, the
@@ -36,14 +36,14 @@ config MLX5_CORE_EN
 	select PAGE_POOL
 	select DIMLIB
 	default n
-	---help---
+	help
 	  Ethernet support in Mellanox Technologies ConnectX-4 NIC.
 
 config MLX5_EN_ARFS
 	bool "Mellanox MLX5 ethernet accelerated receive flow steering (ARFS) support"
 	depends on MLX5_CORE_EN && RFS_ACCEL
 	default y
-	---help---
+	help
 	  Mellanox MLX5 ethernet hardware-accelerated receive flow steering support,
 	  Enables ethernet netdevice arfs support and ntuple filtering.
 
@@ -51,7 +51,7 @@ config MLX5_EN_RXNFC
 	bool "Mellanox MLX5 ethernet rx nfc flow steering support"
 	depends on MLX5_CORE_EN
 	default y
-	---help---
+	help
 	  Mellanox MLX5 ethernet rx nfc flow steering support
 	  Enables ethtool receive network flow classification, which allows user defined
 	  flow rules to direct traffic into arbitrary rx queue via ethtool set/get_rxnfc
@@ -61,7 +61,7 @@ config MLX5_MPFS
 	bool "Mellanox Technologies MLX5 MPFS support"
 	depends on MLX5_CORE_EN
 	default y
-	---help---
+	help
 	  Mellanox Technologies Ethernet Multi-Physical Function Switch (MPFS)
 	  support in ConnectX NIC. MPFs is required for when multi-PF configuration
 	  is enabled to allow passing user configured unicast MAC addresses to the
@@ -71,7 +71,7 @@ config MLX5_ESWITCH
 	bool "Mellanox Technologies MLX5 SRIOV E-Switch support"
 	depends on MLX5_CORE_EN && NET_SWITCHDEV
 	default y
-	---help---
+	help
 	  Mellanox Technologies Ethernet SRIOV E-Switch support in ConnectX NIC.
 	  E-Switch provides internal SRIOV packet steering and switching for the
 	  enabled VFs and PF in two available modes:
@@ -107,7 +107,7 @@ config MLX5_CORE_EN_DCB
 	bool "Data Center Bridging (DCB) Support"
 	default y
 	depends on MLX5_CORE_EN && DCB
-	---help---
+	help
 	  Say Y here if you want to use Data Center Bridging (DCB) in the
 	  driver.
 	  If set to N, will not be able to configure QoS and ratelimit attributes.
@@ -119,7 +119,7 @@ config MLX5_CORE_IPOIB
 	bool "Mellanox 5th generation network adapters (connectX series) IPoIB offloads support"
 	depends on MLX5_CORE_EN
 	default n
-	---help---
+	help
 	  MLX5 IPoIB offloads & acceleration support.
 
 config MLX5_FPGA_IPSEC
diff --git a/drivers/net/ethernet/mellanox/mlxfw/Kconfig b/drivers/net/ethernet/mellanox/mlxfw/Kconfig
index 5b604501f33e..c339f3c46e45 100644
--- a/drivers/net/ethernet/mellanox/mlxfw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxfw/Kconfig
@@ -5,7 +5,7 @@
 
 config MLXFW
 	tristate "Mellanox Technologies firmware flash module"
-	---help---
+	help
 	  This driver supports Mellanox Technologies Firmware
 	  flashing common logic.
 
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Kconfig b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
index f458fd1ce9f8..872e9910bb7c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
@@ -6,7 +6,7 @@
 config MLXSW_CORE
 	tristate "Mellanox Technologies Switch ASICs support"
 	select NET_DEVLINK
-	---help---
+	help
 	  This driver supports Mellanox Technologies Switch ASICs family.
 
 	  To compile this driver as a module, choose M here: the
@@ -17,14 +17,14 @@ config MLXSW_CORE_HWMON
 	depends on MLXSW_CORE && HWMON
 	depends on !(MLXSW_CORE=y && HWMON=m)
 	default y
-	---help---
+	help
 	  Say Y here if you want to expose HWMON interface on mlxsw devices.
 
 config MLXSW_CORE_THERMAL
 	bool "Thermal zone support for Mellanox Technologies Switch ASICs"
 	depends on MLXSW_CORE && THERMAL
 	default y
-	---help---
+	help
 	 Say Y here if you want to automatically control fans speed according
 	 ambient temperature reported by ASIC.
 
@@ -32,7 +32,7 @@ config MLXSW_PCI
 	tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
 	depends on PCI && HAS_IOMEM && MLXSW_CORE
 	default m
-	---help---
+	help
 	  This is PCI bus implementation for Mellanox Technologies Switch ASICs.
 
 	  To compile this driver as a module, choose M here: the
@@ -42,7 +42,7 @@ config MLXSW_I2C
 	tristate "I2C bus implementation for Mellanox Technologies Switch ASICs"
 	depends on I2C && MLXSW_CORE
 	default m
-	---help---
+	help
 	  This is I2C bus implementation for Mellanox Technologies Switch ASICs.
 
 	  To compile this driver as a module, choose M here: the
@@ -52,7 +52,7 @@ config MLXSW_SWITCHIB
 	tristate "Mellanox Technologies SwitchIB and SwitchIB-2 support"
 	depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV
 	default m
-	---help---
+	help
 	  This driver supports Mellanox Technologies SwitchIB and SwitchIB-2
 	  Infiniband Switch ASICs.
 
@@ -63,7 +63,7 @@ config MLXSW_SWITCHX2
 	tristate "Mellanox Technologies SwitchX-2 support"
 	depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV
 	default m
-	---help---
+	help
 	  This driver supports Mellanox Technologies SwitchX-2 Ethernet
 	  Switch ASICs.
 
@@ -86,7 +86,7 @@ config MLXSW_SPECTRUM
 	imply PTP_1588_CLOCK
 	select NET_PTP_CLASSIFY if PTP_1588_CLOCK
 	default m
-	---help---
+	help
 	  This driver supports Mellanox Technologies
 	  Spectrum/Spectrum-2/Spectrum-3 Ethernet Switch ASICs.
 
@@ -97,7 +97,7 @@ config MLXSW_SPECTRUM_DCB
 	bool "Data Center Bridging (DCB) support"
 	depends on MLXSW_SPECTRUM && DCB
 	default y
-	---help---
+	help
 	  Say Y here if you want to use Data Center Bridging (DCB) in the
 	  driver.
 
@@ -105,7 +105,7 @@ config MLXSW_MINIMAL
 	tristate "Mellanox Technologies minimal I2C support"
 	depends on MLXSW_CORE && MLXSW_I2C
 	default m
-	---help---
+	help
 	  This driver supports I2C access for Mellanox Technologies Switch
 	  ASICs.