diff options
| author | Corentin Labbe <clabbe@baylibre.com> | 2021-03-19 13:44:22 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2021-03-19 13:44:06 -0700 |
| commit | 014dfa26ce1c647af09bf506285ef67e0e3f0a6b (patch) | |
| tree | 42bd93ea3404b6e2e042e85498cc96d48caa672a /drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | |
| parent | f91a50d8b51b5c8ef1cfb08115a005bba4250507 (diff) | |
net: stmmac: dwmac-sun8i: Provide TX and RX fifo sizes
MTU cannot be changed on dwmac-sun8i. (ip link set eth0 mtu xxx returning EINVAL)
This is due to tx_fifo_size being 0, since this value is used to compute valid
MTU range.
Like dwmac-sunxi (with commit 806fd188ce2a ("net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes"))
dwmac-sun8i need to have tx and rx fifo sizes set.
I have used values from datasheets.
After this patch, setting a non-default MTU (like 1000) value works and network is still useable.
Tested-on: sun8i-h3-orangepi-pc
Tested-on: sun8i-r40-bananapi-m2-ultra
Tested-on: sun50i-a64-bananapi-m64
Tested-on: sun50i-h5-nanopi-neo-plus2
Tested-on: sun50i-h6-pine-h64
Fixes: 9f93ac8d408 ("net-next: stmmac: Add dwmac-sun8i")
Reported-by: Belisko Marek <marek.belisko@gmail.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index 6b75cf2603ff..e62efd166ec8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -1214,6 +1214,8 @@ static int sun8i_dwmac_probe(struct platform_device *pdev) plat_dat->init = sun8i_dwmac_init; plat_dat->exit = sun8i_dwmac_exit; plat_dat->setup = sun8i_dwmac_setup; + plat_dat->tx_fifo_size = 4096; + plat_dat->rx_fifo_size = 16384; ret = sun8i_dwmac_set_syscon(&pdev->dev, plat_dat); if (ret) |