diff options
author | Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> | 2022-04-14 18:07:09 +0530 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2022-04-15 11:46:29 +0100 |
commit | 945e659dffad2d2e11a105c477d423cb1b5edd95 (patch) | |
tree | 3dc662d76f810df89a11bc487727e117aba77acb /drivers/net/ethernet/xilinx | |
parent | 81669e7c6ca44746d869925f337d9bbb0a252fc1 (diff) |
net: emaclite: Fix coding style
Make coding style changes to fix checkpatch script warnings.
There is no functional change. Fixes below check and warnings-
CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: spinlock_t definition without comment
CHECK: Please don't use multiple blank lines
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
CHECK: braces {} should be used on all arms of this statement
CHECK: Unbalanced braces around else statement
CHECK: Alignment should match open parenthesis
WARNING: Missing a blank line after declarations
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/xilinx')
-rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_emaclite.c | 35 |
1 files changed, 15 insertions, 20 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 57a24f62e353..6294b714fbfa 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later -/* - * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device. +/* Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device. * * This is a new flat driver which is based on the original emac_lite * driver from John Williams <john.williams@xilinx.com>. @@ -91,8 +90,6 @@ #define XEL_ARP_PACKET_SIZE 28 /* Max ARP packet size */ #define XEL_HEADER_IP_LENGTH_OFFSET 16 /* IP Length Offset */ - - #define TX_TIMEOUT (60 * HZ) /* Tx timeout is 60 seconds. */ #define ALIGNMENT 4 @@ -124,7 +121,6 @@ * @last_link: last link status */ struct net_local { - struct net_device *ndev; bool tx_ping_pong; @@ -133,7 +129,7 @@ struct net_local { u32 next_rx_buf_to_use; void __iomem *base_addr; - spinlock_t reset_lock; + spinlock_t reset_lock; /* serialize xmit and tx_timeout execution */ struct sk_buff *deferred_skb; struct phy_device *phy_dev; @@ -144,7 +140,6 @@ struct net_local { int last_link; }; - /*************************/ /* EmacLite driver calls */ /*************************/ @@ -207,7 +202,7 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata) * address in the EmacLite device. */ static void xemaclite_aligned_write(const void *src_ptr, u32 *dest_ptr, - unsigned length) + unsigned int length) { const u16 *from_u16_ptr; u32 align_buffer; @@ -265,7 +260,7 @@ static void xemaclite_aligned_write(const void *src_ptr, u32 *dest_ptr, * to a 16-bit aligned buffer. */ static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr, - unsigned length) + unsigned int length) { u16 *to_u16_ptr, *from_u16_ptr; u32 *from_u32_ptr; @@ -330,7 +325,6 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET); if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK)) == 0) { - /* Switch to next buffer if configured */ if (drvdata->tx_ping_pong != 0) drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET; @@ -346,8 +340,9 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data, if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK)) != 0) return -1; /* Buffers were full, return failure */ - } else + } else { return -1; /* Buffer was full, return failure */ + } /* Write the frame to the buffer */ xemaclite_aligned_write(data, (u32 __force *)addr, byte_count); @@ -423,7 +418,6 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen) * or an IP packet or an ARP packet */ if (proto_type > ETH_DATA_LEN) { - if (proto_type == ETH_P_IP) { length = ((ntohl(xemaclite_readl(addr + XEL_HEADER_IP_LENGTH_OFFSET + @@ -433,23 +427,25 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen) length = min_t(u16, length, ETH_DATA_LEN); length += ETH_HLEN + ETH_FCS_LEN; - } else if (proto_type == ETH_P_ARP) + } else if (proto_type == ETH_P_ARP) { length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN; - else + } else { /* Field contains type other than IP or ARP, use max * frame size and let user parse it */ length = ETH_FRAME_LEN + ETH_FCS_LEN; - } else + } + } else { /* Use the length in the frame, plus the header and trailer */ length = proto_type + ETH_HLEN + ETH_FCS_LEN; + } if (WARN_ON(length > maxlen)) length = maxlen; /* Read from the EmacLite device */ xemaclite_aligned_read((u32 __force *)(addr + XEL_RXBUFF_OFFSET), - data, length); + data, length); /* Acknowledge the frame */ reg_data = xemaclite_readl(addr + XEL_RSR_OFFSET); @@ -671,8 +667,7 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) /* Check if the Transmission for the first buffer is completed */ tx_status = xemaclite_readl(base_addr + XEL_TSR_OFFSET); if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && - (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { - + (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; xemaclite_writel(tx_status, base_addr + XEL_TSR_OFFSET); @@ -682,8 +677,7 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) /* Check if the Transmission for the second buffer is completed */ tx_status = xemaclite_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && - (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { - + (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; xemaclite_writel(tx_status, base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); @@ -840,6 +834,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) of_address_to_resource(npp, 0, &res); if (lp->ndev->mem_start != res.start) { struct phy_device *phydev; + phydev = of_phy_find_device(lp->phy_node); if (!phydev) dev_info(dev, |