Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Enable memcg accounting for various networking objects.

  BPF:

   - Introduce bpf timers.

   - Add perf link and opaque bpf_cookie which the program can read out
     again, to be used in libbpf-based USDT library.

   - Add bpf_task_pt_regs() helper to access user space pt_regs in
     kprobes, to help user space stack unwinding.

   - Add support for UNIX sockets for BPF sockmap.

   - Extend BPF iterator support for UNIX domain sockets.

   - Allow BPF TCP congestion control progs and bpf iterators to call
     bpf_setsockopt(), e.g. to switch to another congestion control
     algorithm.

  Protocols:

   - Support IOAM Pre-allocated Trace with IPv6.

   - Support Management Component Transport Protocol.

   - bridge: multicast: add vlan support.

   - netfilter: add hooks for the SRv6 lightweight tunnel driver.

   - tcp:
       - enable mid-stream window clamping (by user space or BPF)
       - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
       - more accurate DSACK processing for RACK-TLP

   - mptcp:
       - add full mesh path manager option
       - add partial support for MP_FAIL
       - improve use of backup subflows
       - optimize option processing

   - af_unix: add OOB notification support.

   - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
     router.

   - mac80211: Target Wake Time support in AP mode.

   - can: j1939: extend UAPI to notify about RX status.

  Driver APIs:

   - Add page frag support in page pool API.

   - Many improvements to the DSA (distributed switch) APIs.

   - ethtool: extend IRQ coalesce uAPI with timer reset modes.

   - devlink: control which auxiliary devices are created.

   - Support CAN PHYs via the generic PHY subsystem.

   - Proper cross-chip support for tag_8021q.

   - Allow TX forwarding for the software bridge data path to be
     offloaded to capable devices.

  Drivers:

   - veth: more flexible channels number configuration.

   - openvswitch: introduce per-cpu upcall dispatch.

   - Add internet mix (IMIX) mode to pktgen.

   - Transparently handle XDP operations in the bonding driver.

   - Add LiteETH network driver.

   - Renesas (ravb):
       - support Gigabit Ethernet IP

   - NXP Ethernet switch (sja1105):
       - fast aging support
       - support for "H" switch topologies
       - traffic termination for ports under VLAN-aware bridge

   - Intel 1G Ethernet
       - support getcrosststamp() with PCIe PTM (Precision Time
         Measurement) for better time sync
       - support Credit-Based Shaper (CBS) offload, enabling HW traffic
         prioritization and bandwidth reservation

   - Broadcom Ethernet (bnxt)
       - support pulse-per-second output
       - support larger Rx rings

   - Mellanox Ethernet (mlx5)
       - support ethtool RSS contexts and MQPRIO channel mode
       - support LAG offload with bridging
       - support devlink rate limit API
       - support packet sampling on tunnels

   - Huawei Ethernet (hns3):
       - basic devlink support
       - add extended IRQ coalescing support
       - report extended link state

   - Netronome Ethernet (nfp):
       - add conntrack offload support

   - Broadcom WiFi (brcmfmac):
       - add WPA3 Personal with FT to supported cipher suites
       - support 43752 SDIO device

   - Intel WiFi (iwlwifi):
       - support scanning hidden 6GHz networks
       - support for a new hardware family (Bz)

   - Xen pv driver:
       - harden netfront against malicious backends

   - Qualcomm mobile
       - ipa: refactor power management and enable automatic suspend
       - mhi: move MBIM to WWAN subsystem interfaces

  Refactor:

   - Ambient BPF run context and cgroup storage cleanup.

   - Compat rework for ndo_ioctl.

  Old code removal:

   - prism54 remove the obsoleted driver, deprecated by the p54 driver.

   - wan: remove sbni/granch driver"

* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
  net: Add depends on OF_NET for LiteX's LiteETH
  ipv6: seg6: remove duplicated include
  net: hns3: remove unnecessary spaces
  net: hns3: add some required spaces
  net: hns3: clean up a type mismatch warning
  net: hns3: refine function hns3_set_default_feature()
  ipv6: remove duplicated 'net/lwtunnel.h' include
  net: w5100: check return value after calling platform_get_resource()
  net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
  net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
  net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
  fou: remove sparse errors
  ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
  octeontx2-af: Set proper errorcode for IPv4 checksum errors
  octeontx2-af: Fix static code analyzer reported issues
  octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
  octeontx2-af: Fix loop in free and unmap counter
  af_unix: fix potential NULL deref in unix_dgram_connect()
  dpaa2-eth: Replace strlcpy with strscpy
  octeontx2-af: Use NDC TX for transmit packet data
  ...

1 files changed, 6 insertions, 12 deletions

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 5d62b85a4024..bdac087058b2 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -532,12 +532,6 @@ static int at8031_register_regulators(struct phy_device *phydev)
 	return 0;
 }
 
-static bool at803x_match_phy_id(struct phy_device *phydev, u32 phy_id)
-{
-	return (phydev->phy_id & phydev->drv->phy_id_mask)
-		== (phy_id & phydev->drv->phy_id_mask);
-}
-
 static int at803x_parse_dt(struct phy_device *phydev)
 {
 	struct device_node *node = phydev->mdio.dev.of_node;
@@ -602,8 +596,8 @@ static int at803x_parse_dt(struct phy_device *phydev)
 		 *   to the AR8030 so there might be a good chance it works on
 		 *   the AR8030 too.
 		 */
-		if (at803x_match_phy_id(phydev, ATH8030_PHY_ID) ||
-		    at803x_match_phy_id(phydev, ATH8035_PHY_ID)) {
+		if (phydev->drv->phy_id == ATH8030_PHY_ID ||
+		    phydev->drv->phy_id == ATH8035_PHY_ID) {
 			priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
 			priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
 		}
@@ -631,7 +625,7 @@ static int at803x_parse_dt(struct phy_device *phydev)
 	/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
 	 * options.
 	 */
-	if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
+	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
 		if (of_property_read_bool(node, "qca,keep-pll-enabled"))
 			priv->flags |= AT803X_KEEP_PLL_ENABLED;
 
@@ -676,7 +670,7 @@ static int at803x_probe(struct phy_device *phydev)
 	 * Switch to the copper page, as otherwise we read
 	 * the PHY capabilities from the fiber side.
 	 */
-	if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
+	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
 		phy_lock_mdio_bus(phydev);
 		ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
 		phy_unlock_mdio_bus(phydev);
@@ -709,7 +703,7 @@ static int at803x_get_features(struct phy_device *phydev)
 	if (err)
 		return err;
 
-	if (!at803x_match_phy_id(phydev, ATH8031_PHY_ID))
+	if (phydev->drv->phy_id != ATH8031_PHY_ID)
 		return 0;
 
 	/* AR8031/AR8033 have different status registers
@@ -820,7 +814,7 @@ static int at803x_config_init(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
+	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
 		ret = at8031_pll_config(phydev);
 		if (ret < 0)
 			return ret;