diff options
| author | Maxime Chevallier <maxime.chevallier@bootlin.com> | 2019-02-23 00:37:40 +0100 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2019-02-24 17:45:25 -0800 |
| commit | e555e5b1b9aeec679eecb228fa9a36c070c57cbb (patch) | |
| tree | 06891c863bd61eeb2786c8709db9d87211e1af66 /drivers/net/phy/marvell10g.c | |
| parent | 0feaccd595fb130f23833938db77551f534b4932 (diff) | |
net: phy: marvell10g: Use 2500BASEX when using 2.5GBASET
The Marvell Alaska family of PHYs supports 2.5GBaseT and 5GBaseT modes,
as defined in the 802.3bz specification.
Upon establishing a 2.5GBASET link, the PHY will reconfigure it's MII
interface to 2500BASEX.
At 5G, the PHY will reconfigure it's interface to 5GBASE-R, but this
mode isn't supported by any MAC for now.
This was tested with :
- The 88X3310, which is on the MacchiatoBin
- The 88E2010, an Alaska PHY that has no fiber interfaces, and is
limited to 5G maximum speed.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/marvell10g.c')
| -rw-r--r-- | drivers/net/phy/marvell10g.c | 26 |
1 files changed, 19 insertions, 7 deletions
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 821ef1b2f8cc..9342d8c2ff7f 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -235,6 +235,7 @@ static int mv3310_config_init(struct phy_device *phydev) { /* Check that the PHY interface type is compatible */ if (phydev->interface != PHY_INTERFACE_MODE_SGMII && + phydev->interface != PHY_INTERFACE_MODE_2500BASEX && phydev->interface != PHY_INTERFACE_MODE_XAUI && phydev->interface != PHY_INTERFACE_MODE_RXAUI && phydev->interface != PHY_INTERFACE_MODE_10GKR) @@ -313,18 +314,29 @@ static int mv3310_aneg_done(struct phy_device *phydev) static void mv3310_update_interface(struct phy_device *phydev) { if ((phydev->interface == PHY_INTERFACE_MODE_SGMII || + phydev->interface == PHY_INTERFACE_MODE_2500BASEX || phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) { /* The PHY automatically switches its serdes interface (and - * active PHYXS instance) between Cisco SGMII and 10GBase-KR - * modes according to the speed. Florian suggests setting - * phydev->interface to communicate this to the MAC. Only do - * this if we are already in either SGMII or 10GBase-KR mode. + * active PHYXS instance) between Cisco SGMII, 10GBase-KR and + * 2500BaseX modes according to the speed. Florian suggests + * setting phydev->interface to communicate this to the MAC. + * Only do this if we are already in one of the above modes. */ - if (phydev->speed == SPEED_10000) + switch (phydev->speed) { + case SPEED_10000: phydev->interface = PHY_INTERFACE_MODE_10GKR; - else if (phydev->speed >= SPEED_10 && - phydev->speed < SPEED_10000) + break; + case SPEED_2500: + phydev->interface = PHY_INTERFACE_MODE_2500BASEX; + break; + case SPEED_1000: + case SPEED_100: + case SPEED_10: phydev->interface = PHY_INTERFACE_MODE_SGMII; + break; + default: + break; + } } } |