diff options
| author | Peter Geis <pgwipeout@gmail.com> | 2021-05-29 07:05:56 -0400 |
|---|---|---|
| committer | Jakub Kicinski <kuba@kernel.org> | 2021-05-30 14:24:38 -0700 |
| commit | 0cc8bddb5b0665283baba6d89684630663c0ccbd (patch) | |
| tree | 2f6316473747920bdcaf82e9f398751838b97bcd /drivers/net/phy/motorcomm.c | |
| parent | 546d6bad18c04926c4d0eba4222654a9a60ea830 (diff) | |
net: phy: abort loading yt8511 driver in unsupported modes
While investigating the clang `ge` uninitialized variable report, it was
discovered the default switch would have unintended consequences. Due to
the switch to __phy_modify, the driver would modify the ID values in the
default scenario.
Fix this by promoting the interface mode switch and aborting when the
mode is not a supported RGMII mode.
This prevents the `ge` and `fe` variables from ever being used
uninitialized.
Fixes: 48e8c6f1612b ("net: phy: add driver for Motorcomm yt8511 phy")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers/net/phy/motorcomm.c')
| -rw-r--r-- | drivers/net/phy/motorcomm.c | 15 |
1 files changed, 8 insertions, 7 deletions
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index 68cd19540c67..7e6ac2c5e27e 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -53,15 +53,10 @@ static int yt8511_config_init(struct phy_device *phydev) int oldpage, ret = 0; unsigned int ge, fe; - /* set clock mode to 125mhz */ oldpage = phy_select_page(phydev, YT8511_EXT_CLK_GATE); if (oldpage < 0) goto err_restore_page; - ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M); - if (ret < 0) - goto err_restore_page; - /* set rgmii delay mode */ switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII: @@ -80,14 +75,20 @@ static int yt8511_config_init(struct phy_device *phydev) ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN; fe = YT8511_DELAY_FE_TX_EN; break; - default: /* leave everything alone in other modes */ - break; + default: /* do not support other modes */ + ret = -EOPNOTSUPP; + goto err_restore_page; } ret = __phy_modify(phydev, YT8511_PAGE, (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge); if (ret < 0) goto err_restore_page; + /* set clock mode to 125mhz */ + ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M); + if (ret < 0) + goto err_restore_page; + /* fast ethernet delay is in a separate page */ ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_DELAY_DRIVE); if (ret < 0) |