summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
authorArun Parameswaran <arunp@broadcom.com>2015-10-06 12:25:49 -0700
committerDavid S. Miller <davem@davemloft.net>2015-10-08 04:45:52 -0700
commit8e185d6997bb67068f0ca8f062a50caa2608cf1b (patch)
treeb2d42099f3777dc770023566cfd8d1dc3f1cc761 /drivers/net/phy
parenta1cba5613edf50c2a213fa90c30aa10500b241b7 (diff)
net: phy: Broadcom Cygnus internal Etherent PHY driver
Add support for the Broadcom Cygnus SoCs internal PHY's. The PHYs are 1000M/100M/10M capable with support for 'EEE' and 'APD' (Auto Power Down). This driver supports the following Broadcom Cygnus SoCs: - BCM583XX (BCM58300, BCM58302, BCM58303, BCM58305) - BCM113XX (BCM11300, BCM11320, BCM11350, BCM11360) The PHY's on these SoC's require some workarounds for stable operation, both during configuration time and during suspend/resume. This driver handles the application of the workarounds. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig13
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/bcm-cygnus.c158
3 files changed, 172 insertions, 0 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 606fdc924768..9d097ae54fb2 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -79,6 +79,19 @@ config BROADCOM_PHY
Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
BCM5481 and BCM5482 PHYs.
+config BCM_CYGNUS_PHY
+ tristate "Drivers for Broadcom Cygnus SoC internal PHY"
+ depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+ depends on MDIO_BCM_IPROC
+ select BCM_NET_PHYLIB
+ ---help---
+ This PHY driver is for the 1G internal PHYs of the Broadcom
+ Cygnus Family SoC.
+
+ Currently supports internal PHY's used in the BCM11300,
+ BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
+ BCM58303 & BCM58305 Broadcom Cygnus SoCs.
+
config BCM63XX_PHY
tristate "Drivers for Broadcom 63xx SOCs internal PHY"
depends on BCM63XX
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 6932475a1a8a..7655d47ad8d8 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
+obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c
new file mode 100644
index 000000000000..49bbc6826883
--- /dev/null
+++ b/drivers/net/phy/bcm-cygnus.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Broadcom Cygnus SoC internal transceivers support. */
+#include "bcm-phy-lib.h"
+#include <linux/brcmphy.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+/* Broadcom Cygnus Phy specific registers */
+#define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0 0x91E5 /* VDAL Control register */
+
+static int bcm_cygnus_afe_config(struct phy_device *phydev)
+{
+ int rc;
+
+ /* ensure smdspclk is enabled */
+ rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, 0x0c30);
+ if (rc < 0)
+ return rc;
+
+ /* AFE_VDAC_ICTRL_0 bit 7:4 Iq=1100 for 1g 10bt, normal modes */
+ rc = bcm_phy_write_misc(phydev, 0x39, 0x01, 0xA7C8);
+ if (rc < 0)
+ return rc;
+
+ /* AFE_HPF_TRIM_OTHERS bit11=1, short cascode enable for all modes*/
+ rc = bcm_phy_write_misc(phydev, 0x3A, 0x00, 0x0803);
+ if (rc < 0)
+ return rc;
+
+ /* AFE_TX_CONFIG_1 bit 7:4 Iq=1100 for test modes */
+ rc = bcm_phy_write_misc(phydev, 0x3A, 0x01, 0xA740);
+ if (rc < 0)
+ return rc;
+
+ /* AFE TEMPSEN_OTHERS rcal_HT, rcal_LT 10000 */
+ rc = bcm_phy_write_misc(phydev, 0x3A, 0x03, 0x8400);
+ if (rc < 0)
+ return rc;
+
+ /* AFE_FUTURE_RSV bit 2:0 rccal <2:0>=100 */
+ rc = bcm_phy_write_misc(phydev, 0x3B, 0x00, 0x0004);
+ if (rc < 0)
+ return rc;
+
+ /* Adjust bias current trim to overcome digital offSet */
+ rc = phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x02);
+ if (rc < 0)
+ return rc;
+
+ /* make rcal=100, since rdb default is 000 */
+ rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB1, 0x10);
+ if (rc < 0)
+ return rc;
+
+ /* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */
+ rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x10);
+ if (rc < 0)
+ return rc;
+
+ /* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */
+ rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x00);
+
+ return 0;
+}
+
+static int bcm_cygnus_config_init(struct phy_device *phydev)
+{
+ int reg, rc;
+
+ reg = phy_read(phydev, MII_BCM54XX_ECR);
+ if (reg < 0)
+ return reg;
+
+ /* Mask interrupts globally. */
+ reg |= MII_BCM54XX_ECR_IM;
+ rc = phy_write(phydev, MII_BCM54XX_ECR, reg);
+ if (rc)
+ return rc;
+
+ /* Unmask events of interest */
+ reg = ~(MII_BCM54XX_INT_DUPLEX |
+ MII_BCM54XX_INT_SPEED |
+ MII_BCM54XX_INT_LINK);
+ rc = phy_write(phydev, MII_BCM54XX_IMR, reg);
+ if (rc)
+ return rc;
+
+ /* Apply AFE settings for the PHY */
+ rc = bcm_cygnus_afe_config(phydev);
+ if (rc)
+ return rc;
+
+ /* Advertise EEE */
+ rc = bcm_phy_enable_eee(phydev);
+ if (rc)
+ return rc;
+
+ /* Enable APD */
+ return bcm_phy_enable_apd(phydev, false);
+}
+
+static int bcm_cygnus_resume(struct phy_device *phydev)
+{
+ int rc;
+
+ genphy_resume(phydev);
+
+ /* Re-initialize the PHY to apply AFE work-arounds and
+ * configurations when coming out of suspend.
+ */
+ rc = bcm_cygnus_config_init(phydev);
+ if (rc)
+ return rc;
+
+ /* restart auto negotiation with the new settings */
+ return genphy_config_aneg(phydev);
+}
+
+static struct phy_driver bcm_cygnus_phy_driver[] = {
+{
+ .phy_id = PHY_ID_BCM_CYGNUS,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom Cygnus PHY",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .config_init = bcm_cygnus_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
+ .suspend = genphy_suspend,
+ .resume = bcm_cygnus_resume,
+} };
+
+static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = {
+ { PHY_ID_BCM_CYGNUS, 0xfffffff0, },
+ { }
+};
+MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl);
+
+module_phy_driver(bcm_cygnus_phy_driver);
+
+MODULE_DESCRIPTION("Broadcom Cygnus internal PHY driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Broadcom Corporation");