summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@armlinux.org.uk>2020-03-03 18:08:45 +0000
committerDavid S. Miller <davem@davemloft.net>2020-03-04 14:41:52 -0800
commitc9cc1c815d36f9d5723e369d662f238bc3b35d83 (patch)
tree77512a0d2a46fafbb96d42a6f8044d96ac8c6bcf /drivers/net/phy
parenta585c03e63fd3537cdf94e52485699617424453c (diff)
net: phy: marvell10g: place in powersave mode at probe
Place the 88x3310 into powersaving mode when probing, which saves 600mW per PHY. For both PHYs on the Macchiatobin double-shot, this saves about 10% of the board idle power. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/marvell10g.c30
1 files changed, 26 insertions, 4 deletions
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 7092feb9e6b5..7e05b92504f0 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -227,6 +227,18 @@ static int mv3310_hwmon_probe(struct phy_device *phydev)
}
#endif
+static int mv3310_power_down(struct phy_device *phydev)
+{
+ return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+ MV_V2_PORT_CTRL_PWRDOWN);
+}
+
+static int mv3310_power_up(struct phy_device *phydev)
+{
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
+ MV_V2_PORT_CTRL_PWRDOWN);
+}
+
static int mv3310_reset(struct phy_device *phydev, u32 unit)
{
int retries, val, err;
@@ -348,6 +360,11 @@ static int mv3310_probe(struct phy_device *phydev)
dev_set_drvdata(&phydev->mdio.dev, priv);
+ /* Powering down the port when not in use saves about 600mW */
+ ret = mv3310_power_down(phydev);
+ if (ret)
+ return ret;
+
ret = mv3310_hwmon_probe(phydev);
if (ret)
return ret;
@@ -357,16 +374,14 @@ static int mv3310_probe(struct phy_device *phydev)
static int mv3310_suspend(struct phy_device *phydev)
{
- return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
- MV_V2_PORT_CTRL_PWRDOWN);
+ return mv3310_power_down(phydev);
}
static int mv3310_resume(struct phy_device *phydev)
{
int ret;
- ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
- MV_V2_PORT_CTRL_PWRDOWN);
+ ret = mv3310_power_up(phydev);
if (ret)
return ret;
@@ -392,6 +407,8 @@ static bool mv3310_has_pma_ngbaset_quirk(struct phy_device *phydev)
static int mv3310_config_init(struct phy_device *phydev)
{
+ int err;
+
/* Check that the PHY interface type is compatible */
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
@@ -402,6 +419,11 @@ static int mv3310_config_init(struct phy_device *phydev)
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+ /* Power up so reset works */
+ err = mv3310_power_up(phydev);
+ if (err)
+ return err;
+
/* Enable EDPD mode - saving 600mW */
return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
}