Merge ath-next from ath.git

Major changes in ath10k:

* add spectral scan support for qca99x0
* add qca6164 support

1 files changed, 17 insertions, 1 deletions

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 25510679fd2e..b87b98617073 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -53,6 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 7,
 		.has_shifted_cc_wraparound = true,
 		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			.dir = QCA988X_HW_2_0_FW_DIR,
 			.fw = QCA988X_HW_2_0_FW_FILE,
@@ -68,6 +69,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
 		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			.dir = QCA6174_HW_2_1_FW_DIR,
 			.fw = QCA6174_HW_2_1_FW_FILE,
@@ -83,6 +85,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
 		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			.dir = QCA6174_HW_3_0_FW_DIR,
 			.fw = QCA6174_HW_3_0_FW_FILE,
@@ -98,6 +101,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
 		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			/* uses same binaries as hw3.0 */
 			.dir = QCA6174_HW_3_0_FW_DIR,
@@ -115,6 +119,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 7,
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
+		.channel_counters_freq_hz = 150000,
 		.fw = {
 			.dir = QCA99X0_HW_2_0_FW_DIR,
 			.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -231,6 +236,17 @@ static int ath10k_init_configure_target(struct ath10k *ar)
 		return ret;
 	}
 
+	/* Some devices have a special sanity check that verifies the PCI
+	 * Device ID is written to this host interest var. It is known to be
+	 * required to boot QCA6164.
+	 */
+	ret = ath10k_bmi_write32(ar, hi_hci_uart_pwr_mgmt_params_ext,
+				 ar->dev_id);
+	if (ret) {
+		ath10k_err(ar, "failed to set pwr_mgmt_params: %d\n", ret);
+		return ret;
+	}
+
 	return 0;
 }
 
@@ -1411,13 +1427,13 @@ int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt)
 void ath10k_core_stop(struct ath10k *ar)
 {
 	lockdep_assert_held(&ar->conf_mutex);
+	ath10k_debug_stop(ar);
 
 	/* try to suspend target */
 	if (ar->state != ATH10K_STATE_RESTARTING &&
 	    ar->state != ATH10K_STATE_UTF)
 		ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR);
 
-	ath10k_debug_stop(ar);
 	ath10k_hif_stop(ar);
 	ath10k_htt_tx_free(&ar->htt);
 	ath10k_htt_rx_free(&ar->htt);