Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Millar:
 "Here are some highlights from the 2065 networking commits that
  happened this development cycle:

   1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)

   2) Add a generic XDP driver, so that anyone can test XDP even if they
      lack a networking device whose driver has explicit XDP support
      (me).

   3) Sparc64 now has an eBPF JIT too (me)

   4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
      Starovoitov)

   5) Make netfitler network namespace teardown less expensive (Florian
      Westphal)

   6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)

   7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)

   8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)

   9) Multiqueue support in stmmac driver (Joao Pinto)

  10) Remove TCP timewait recycling, it never really could possibly work
      well in the real world and timestamp randomization really zaps any
      hint of usability this feature had (Soheil Hassas Yeganeh)

  11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
      Aleksandrov)

  12) Add socket busy poll support to epoll (Sridhar Samudrala)

  13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
      and several others)

  14) IPSEC hw offload infrastructure (Steffen Klassert)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
  tipc: refactor function tipc_sk_recv_stream()
  tipc: refactor function tipc_sk_recvmsg()
  net: thunderx: Optimize page recycling for XDP
  net: thunderx: Support for XDP header adjustment
  net: thunderx: Add support for XDP_TX
  net: thunderx: Add support for XDP_DROP
  net: thunderx: Add basic XDP support
  net: thunderx: Cleanup receive buffer allocation
  net: thunderx: Optimize CQE_TX handling
  net: thunderx: Optimize RBDR descriptor handling
  net: thunderx: Support for page recycling
  ipx: call ipxitf_put() in ioctl error path
  net: sched: add helpers to handle extended actions
  qed*: Fix issues in the ptp filter config implementation.
  qede: Fix concurrency issue in PTP Tx path processing.
  stmmac: Add support for SIMATIC IOT2000 platform
  net: hns: fix ethtool_get_strings overflow in hns driver
  tcp: fix wraparound issue in tcp_lp
  bpf, arm64: fix jit branch offset related to ldimm64
  bpf, arm64: implement jiting of BPF_XADD
  ...

1 files changed, 64 insertions, 17 deletions

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 3029f257a19a..4674ff33d320 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -457,7 +457,8 @@ static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
 
 	for (;;) {
 		/* since ath10k_install_key we can't hold data_lock all the
-		 * time, so we try to remove the keys incrementally */
+		 * time, so we try to remove the keys incrementally
+		 */
 		spin_lock_bh(&ar->data_lock);
 		i = 0;
 		list_for_each_entry(peer, &ar->peers, list) {
@@ -609,7 +610,8 @@ static u8 ath10k_parse_mpdudensity(u8 mpdudensity)
 	case 2:
 	case 3:
 	/* Our lower layer calculations limit our precision to
-	   1 microsecond */
+	 * 1 microsecond
+	 */
 		return 1;
 	case 4:
 		return 2;
@@ -978,7 +980,8 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
 	arg.channel.band_center_freq2 = chandef->center_freq2;
 
 	/* TODO setup this dynamically, what in case we
-	   don't have any vifs? */
+	 * don't have any vifs?
+	 */
 	arg.channel.mode = chan_to_phymode(chandef);
 	arg.channel.chan_radar =
 			!!(channel->flags & IEEE80211_CHAN_RADAR);
@@ -2373,9 +2376,10 @@ static int ath10k_peer_assoc_qos_ap(struct ath10k *ar,
 		}
 
 		/* TODO setup this based on STA listen interval and
-		   beacon interval. Currently we don't know
-		   sta->listen_interval - mac80211 patch required.
-		   Currently use 10 seconds */
+		 * beacon interval. Currently we don't know
+		 * sta->listen_interval - mac80211 patch required.
+		 * Currently use 10 seconds
+		 */
 		ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr,
 						 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME,
 						 10);
@@ -2451,6 +2455,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 	enum nl80211_band band;
 	const u16 *vht_mcs_mask;
 	u8 ampdu_factor;
+	u8 max_nss, vht_mcs;
+	int i;
 
 	if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
 		return;
@@ -2478,7 +2484,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 	/* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to
 	 * zero in VHT IE. Using it would result in degraded throughput.
 	 * arg->peer_max_mpdu at this point contains HT max_mpdu so keep
-	 * it if VHT max_mpdu is smaller. */
+	 * it if VHT max_mpdu is smaller.
+	 */
 	arg->peer_max_mpdu = max(arg->peer_max_mpdu,
 				 (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 					ampdu_factor)) - 1);
@@ -2489,6 +2496,18 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 	if (sta->bandwidth == IEEE80211_STA_RX_BW_160)
 		arg->peer_flags |= ar->wmi.peer_flags->bw160;
 
+	/* Calculate peer NSS capability from VHT capabilities if STA
+	 * supports VHT.
+	 */
+	for (i = 0, max_nss = 0, vht_mcs = 0; i < NL80211_VHT_NSS_MAX; i++) {
+		vht_mcs = __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map) >>
+			  (2 * i) & 3;
+
+		if ((vht_mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) &&
+		    vht_mcs_mask[i])
+			max_nss = i + 1;
+	}
+	arg->peer_num_spatial_streams = min(sta->rx_nss, max_nss);
 	arg->peer_vht_rates.rx_max_rate =
 		__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
 	arg->peer_vht_rates.rx_mcs_set =
@@ -2779,7 +2798,8 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 	}
 
 	/* ap_sta must be accessed only within rcu section which must be left
-	 * before calling ath10k_setup_peer_smps() which might sleep. */
+	 * before calling ath10k_setup_peer_smps() which might sleep.
+	 */
 	ht_cap = ap_sta->ht_cap;
 	vht_cap = ap_sta->vht_cap;
 
@@ -3050,7 +3070,8 @@ static int ath10k_update_channel_list(struct ath10k *ar)
 
 			/* FIXME: why use only legacy modes, why not any
 			 * HT/VHT modes? Would that even make any
-			 * difference? */
+			 * difference?
+			 */
 			if (channel->band == NL80211_BAND_2GHZ)
 				ch->mode = MODE_11G;
 			else
@@ -3114,7 +3135,8 @@ static void ath10k_regd_update(struct ath10k *ar)
 	}
 
 	/* Target allows setting up per-band regdomain but ath_common provides
-	 * a combined one only */
+	 * a combined one only
+	 */
 	ret = ath10k_wmi_pdev_set_regdomain(ar,
 					    regpair->reg_domain,
 					    regpair->reg_domain, /* 2ghz */
@@ -3126,6 +3148,21 @@ static void ath10k_regd_update(struct ath10k *ar)
 		ath10k_warn(ar, "failed to set pdev regdomain: %d\n", ret);
 }
 
+static void ath10k_mac_update_channel_list(struct ath10k *ar,
+					   struct ieee80211_supported_band *band)
+{
+	int i;
+
+	if (ar->low_5ghz_chan && ar->high_5ghz_chan) {
+		for (i = 0; i < band->n_channels; i++) {
+			if (band->channels[i].center_freq < ar->low_5ghz_chan ||
+			    band->channels[i].center_freq > ar->high_5ghz_chan)
+				band->channels[i].flags |=
+					IEEE80211_CHAN_DISABLED;
+		}
+	}
+}
+
 static void ath10k_reg_notifier(struct wiphy *wiphy,
 				struct regulatory_request *request)
 {
@@ -3149,6 +3186,10 @@ static void ath10k_reg_notifier(struct wiphy *wiphy,
 	if (ar->state == ATH10K_STATE_ON)
 		ath10k_regd_update(ar);
 	mutex_unlock(&ar->conf_mutex);
+
+	if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
+		ath10k_mac_update_channel_list(ar,
+					       ar->hw->wiphy->bands[NL80211_BAND_5GHZ]);
 }
 
 /***************/
@@ -3644,7 +3685,8 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 	 * never transmitted. We delete the peer upon tx completion.
 	 * It is unlikely that a peer for offchannel tx will already be
 	 * present. However it may be in some rare cases so account for that.
-	 * Otherwise we might remove a legitimate peer and break stuff. */
+	 * Otherwise we might remove a legitimate peer and break stuff.
+	 */
 
 	for (;;) {
 		skb = skb_dequeue(&ar->offchan_tx_queue);
@@ -4684,6 +4726,7 @@ static void ath10k_stop(struct ieee80211_hw *hw)
 	}
 	mutex_unlock(&ar->conf_mutex);
 
+	cancel_work_sync(&ar->set_coverage_class_work);
 	cancel_delayed_work_sync(&ar->scan.timeout);
 	cancel_work_sync(&ar->restart_work);
 }
@@ -5683,7 +5726,8 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	}
 
 	/* the peer should not disappear in mid-way (unless FW goes awry) since
-	 * we already hold conf_mutex. we just make sure its there now. */
+	 * we already hold conf_mutex. we just make sure its there now.
+	 */
 	spin_lock_bh(&ar->data_lock);
 	peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
 	spin_unlock_bh(&ar->data_lock);
@@ -5695,8 +5739,7 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 			ret = -EOPNOTSUPP;
 			goto exit;
 		} else {
-			/* if the peer doesn't exist there is no key to disable
-			 * anymore */
+			/* if the peer doesn't exist there is no key to disable anymore */
 			goto exit;
 		}
 	}
@@ -6555,7 +6598,8 @@ static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	long time_left;
 
 	/* mac80211 doesn't care if we really xmit queued frames or not
-	 * we'll collect those frames either way if we stop/delete vdevs */
+	 * we'll collect those frames either way if we stop/delete vdevs
+	 */
 	if (drop)
 		return;
 
@@ -6606,7 +6650,8 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
 	mutex_lock(&ar->conf_mutex);
 
 	/* If device failed to restart it will be in a different state, e.g.
-	 * ATH10K_STATE_WEDGED */
+	 * ATH10K_STATE_WEDGED
+	 */
 	if (ar->state == ATH10K_STATE_RESTARTED) {
 		ath10k_info(ar, "device successfully recovered\n");
 		ar->state = ATH10K_STATE_ON;
@@ -7129,7 +7174,7 @@ ath10k_mac_update_rx_channel(struct ath10k *ar,
 	lockdep_assert_held(&ar->data_lock);
 
 	WARN_ON(ctx && vifs);
-	WARN_ON(vifs && n_vifs != 1);
+	WARN_ON(vifs && !n_vifs);
 
 	/* FIXME: Sort of an optimization and a workaround. Peers and vifs are
 	 * on a linked list now. Doing a lookup peer -> vif -> chanctx for each
@@ -8248,6 +8293,8 @@ int ath10k_mac_register(struct ath10k *ar)
 	ar->hw->wiphy->cipher_suites = cipher_suites;
 	ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
 
+	wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
+
 	ret = ieee80211_register_hw(ar->hw);
 	if (ret) {
 		ath10k_err(ar, "failed to register ieee80211: %d\n", ret);