diff options
| author | Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> | 2023-01-10 15:30:57 +0200 |
|---|---|---|
| committer | Kalle Valo <quic_kvalo@quicinc.com> | 2023-01-17 13:56:28 +0200 |
| commit | a27c6a5853eb9d4f293b99be73a6891fe88263c7 (patch) | |
| tree | 43b4684064ed6273f9484d4f0ace2818ead6594c /drivers/net/wireless/ath/ath11k/mac.c | |
| parent | 8a2f35b9830692f7a616f2f627f943bc748af13a (diff) | |
wifi: ath11k: Add support to configure FTM responder role
Fine Timing Measurement(FTM) support is used to measure round trip
time between two nodes.
Enable FTM responder feature using hw_params on supported device.
Since FTM functionality is offloaded to firmware, adding the
interface allows user space to enable or disable FTM responder.
Also add support for advertising the same in extended capabilities.
QCA6390, WCN6855 and WCN6750 do not support this feature.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221220044435.10506-1-quic_rajkbhag@quicinc.com
Diffstat (limited to 'drivers/net/wireless/ath/ath11k/mac.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath11k/mac.c | 20 |
1 files changed, 19 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index b198edba76eb..767a2a39ad6a 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -3110,7 +3110,7 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw, u16 bitrate; int ret = 0; u8 rateidx; - u32 rate; + u32 rate, param; u32 ipv4_cnt; mutex_lock(&ar->conf_mutex); @@ -3412,6 +3412,20 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw, } } + if (changed & BSS_CHANGED_FTM_RESPONDER && + arvif->ftm_responder != info->ftm_responder && + ar->ab->hw_params.ftm_responder && + (vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_MESH_POINT)) { + arvif->ftm_responder = info->ftm_responder; + param = WMI_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE; + ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id, param, + arvif->ftm_responder); + if (ret) + ath11k_warn(ar->ab, "Failed to set ftm responder %i: %d\n", + arvif->vdev_id, ret); + } + if (changed & BSS_CHANGED_FILS_DISCOVERY || changed & BSS_CHANGED_UNSOL_BCAST_PROBE_RESP) ath11k_mac_fils_discovery(arvif, info); @@ -9113,6 +9127,10 @@ static int __ath11k_mac_register(struct ath11k *ar) wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_SET_SCAN_DWELL); + if (ab->hw_params.ftm_responder) + wiphy_ext_feature_set(ar->hw->wiphy, + NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER); + ath11k_reg_init(ar); if (!test_bit(ATH11K_FLAG_RAW_MODE, &ab->dev_flags)) { |