diff options
| author | Kang Yang <quic_kangyang@quicinc.com> | 2023-12-01 18:09:48 +0200 |
|---|---|---|
| committer | Kalle Valo <quic_kvalo@quicinc.com> | 2023-12-05 17:09:50 +0200 |
| commit | ed7e818a7b501012038d6bc6fedadaf7375a380a (patch) | |
| tree | 6d2d3865a4ecb4313e4d3b4985f116b05d1fc4b0 /drivers/net/wireless/ath/ath12k/hw.c | |
| parent | a3012f206d07fa62b5c2e384cbc3a81a4dbba3c9 (diff) | |
wifi: ath12k: fix and enable AP mode for WCN7850
For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but
ath12k_mac_op_assign_vif_chanctx() will try to create peer again. Then an
error will return which makes AP mode startup fail.
Kernel log:
[ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22
wpa_supplicant log:
Failed to set beacon parameters
Interface initialization failed
wls1: interface state UNINITIALIZED->DISABLED
wls1: AP-DISABLED
wls1: Unable to setup interface.
Failed to initialize AP interface
wls1: interface state DISABLED->DISABLED
wls1: AP-DISABLED
So fix this check and enable AP mode for WCN7850, as now AP mode works normally.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121022459.17209-1-quic_kangyang@quicinc.com
Diffstat (limited to 'drivers/net/wireless/ath/ath12k/hw.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath12k/hw.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c index ea3eda1f1948..de60d988d860 100644 --- a/drivers/net/wireless/ath/ath12k/hw.c +++ b/drivers/net/wireless/ath/ath12k/hw.c @@ -949,7 +949,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = { .rx_mac_buf_ring = true, .vdev_start_delay = true, - .interface_modes = BIT(NL80211_IFTYPE_STATION), + .interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_AP), .supports_monitor = false, .idle_ps = true, |