brcmfmac: switch to new platform data

Platform data is only available for sdio. With this patch a new
platform data structure is being used which allows for platform
data for any device and configurable per device. This patch only
switches to the new structure and adds support for SDIO devices.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 47 insertions, 30 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index c790fa89db05..6e367041f691 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -33,8 +33,6 @@
 #include <linux/bcma/bcma.h>
 #include <linux/debugfs.h>
 #include <linux/vmalloc.h>
-#include <linux/platform_data/brcmfmac-sdio.h>
-#include <linux/moduleparam.h>
 #include <asm/unaligned.h>
 #include <defs.h>
 #include <brcmu_wifi.h>
@@ -44,6 +42,8 @@
 #include "sdio.h"
 #include "chip.h"
 #include "firmware.h"
+#include "core.h"
+#include "common.h"
 
 #define DCMD_RESP_TIMEOUT	msecs_to_jiffies(2500)
 #define CTL_DONE_TIMEOUT	msecs_to_jiffies(2500)
@@ -3775,26 +3775,28 @@ static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
 static bool
 brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 {
+	struct brcmf_sdio_dev *sdiodev;
 	u8 clkctl = 0;
 	int err = 0;
 	int reg_addr;
 	u32 reg_val;
 	u32 drivestrength;
 
-	sdio_claim_host(bus->sdiodev->func[1]);
+	sdiodev = bus->sdiodev;
+	sdio_claim_host(sdiodev->func[1]);
 
 	pr_debug("F1 signature read @0x18000000=0x%4x\n",
-		 brcmf_sdiod_regrl(bus->sdiodev, SI_ENUM_BASE, NULL));
+		 brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL));
 
 	/*
 	 * Force PLL off until brcmf_chip_attach()
 	 * programs PLL control regs
 	 */
 
-	brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+	brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 			  BRCMF_INIT_CLKCTL1, &err);
 	if (!err)
-		clkctl = brcmf_sdiod_regrb(bus->sdiodev,
+		clkctl = brcmf_sdiod_regrb(sdiodev,
 					   SBSDIO_FUNC1_CHIPCLKCSR, &err);
 
 	if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
@@ -3803,50 +3805,77 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 		goto fail;
 	}
 
-	bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops);
+	bus->ci = brcmf_chip_attach(sdiodev, &brcmf_sdio_buscore_ops);
 	if (IS_ERR(bus->ci)) {
 		brcmf_err("brcmf_chip_attach failed!\n");
 		bus->ci = NULL;
 		goto fail;
 	}
+	sdiodev->pdata = brcmf_get_module_param(sdiodev->dev,
+						   BRCMF_BUSTYPE_SDIO,
+						   bus->ci->chip,
+						   bus->ci->chiprev);
+	/* platform specific configuration:
+	 *   alignments must be at least 4 bytes for ADMA
+	 */
+	bus->head_align = ALIGNMENT;
+	bus->sgentry_align = ALIGNMENT;
+	if (sdiodev->pdata) {
+		if (sdiodev->pdata->sd_head_align > ALIGNMENT)
+			bus->head_align = sdiodev->pdata->sd_head_align;
+		if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
+			bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
+	}
+	/* allocate scatter-gather table. sg support
+	 * will be disabled upon allocation failure.
+	 */
+	brcmf_sdiod_sgtable_alloc(sdiodev);
+
+#ifdef CONFIG_PM_SLEEP
+	/* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
+	 * is true or when platform data OOB irq is true).
+	 */
+	if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
+	    ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
+	     (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
+		sdiodev->bus_if->wowl_supported = true;
+#endif
 
 	if (brcmf_sdio_kso_init(bus)) {
 		brcmf_err("error enabling KSO\n");
 		goto fail;
 	}
 
-	if ((bus->sdiodev->pdata) && (bus->sdiodev->pdata->drive_strength))
-		drivestrength = bus->sdiodev->pdata->drive_strength;
+	if ((sdiodev->pdata) && (sdiodev->pdata->drive_strength))
+		drivestrength = sdiodev->pdata->drive_strength;
 	else
 		drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
-	brcmf_sdio_drivestrengthinit(bus->sdiodev, bus->ci, drivestrength);
+	brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
 
 	/* Set card control so an SDIO card reset does a WLAN backplane reset */
-	reg_val = brcmf_sdiod_regrb(bus->sdiodev,
-				    SDIO_CCCR_BRCM_CARDCTRL, &err);
+	reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
 	if (err)
 		goto fail;
 
 	reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
 
-	brcmf_sdiod_regwb(bus->sdiodev,
-			  SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
+	brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
 	if (err)
 		goto fail;
 
 	/* set PMUControl so a backplane reset does PMU state reload */
 	reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol);
-	reg_val = brcmf_sdiod_regrl(bus->sdiodev, reg_addr, &err);
+	reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err);
 	if (err)
 		goto fail;
 
 	reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
 
-	brcmf_sdiod_regwl(bus->sdiodev, reg_addr, reg_val, &err);
+	brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err);
 	if (err)
 		goto fail;
 
-	sdio_release_host(bus->sdiodev->func[1]);
+	sdio_release_host(sdiodev->func[1]);
 
 	brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
 
@@ -3867,7 +3896,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 	return true;
 
 fail:
-	sdio_release_host(bus->sdiodev->func[1]);
+	sdio_release_host(sdiodev->func[1]);
 	return false;
 }
 
@@ -4045,18 +4074,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	bus->txminmax = BRCMF_TXMINMAX;
 	bus->tx_seq = SDPCM_SEQ_WRAP - 1;
 
-	/* platform specific configuration:
-	 *   alignments must be at least 4 bytes for ADMA
-	 */
-	bus->head_align = ALIGNMENT;
-	bus->sgentry_align = ALIGNMENT;
-	if (sdiodev->pdata) {
-		if (sdiodev->pdata->sd_head_align > ALIGNMENT)
-			bus->head_align = sdiodev->pdata->sd_head_align;
-		if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
-			bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
-	}
-
 	/* single-threaded workqueue */
 	wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM,
 				     dev_name(&sdiodev->func[1]->dev));