Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
This pull request is intended for the 3.11 stream...

One big highlight is the cw1200 driver the ST-E CW1100 & CW1200
WLAN chipsets.  This one has been lingering for a while, lacking
some review comments.  Once started getting pulled into linux-next,
it got a bit more attention and a number of improvements were made
over the initial cut.  No doubt there will be more changes ahead,
but I think it is looking alright at this point.

Along with that, there is the usual flurry of updates to the mac80211
core and the iwlwifi, mwifiex, ath9k, rt2x00, wil6210, and other
drivers.  A few of the highlights are some rt2x00 refactoring/cleanup
by Gabor Juhos, some rt2800 hardware support enhancements by Stanislaw
Gruszka, some iwlwifi power management updates from Alexander Bondar,
some enhanced bcma SPROM support from Rafał Miłecki, and a variety
of other things here and there.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 461 insertions, 0 deletions

diff --git a/drivers/net/wireless/cw1200/scan.c b/drivers/net/wireless/cw1200/scan.c
new file mode 100644
index 000000000000..ee3c19037aac
--- /dev/null
+++ b/drivers/net/wireless/cw1200/scan.c
@@ -0,0 +1,461 @@
+/*
+ * Scan implementation for ST-Ericsson CW1200 mac80211 drivers
+ *
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include "cw1200.h"
+#include "scan.h"
+#include "sta.h"
+#include "pm.h"
+
+static void cw1200_scan_restart_delayed(struct cw1200_common *priv);
+
+static int cw1200_scan_start(struct cw1200_common *priv, struct wsm_scan *scan)
+{
+	int ret, i;
+	int tmo = 2000;
+
+	switch (priv->join_status) {
+	case CW1200_JOIN_STATUS_PRE_STA:
+	case CW1200_JOIN_STATUS_JOINING:
+		return -EBUSY;
+	default:
+		break;
+	}
+
+	wiphy_dbg(priv->hw->wiphy, "[SCAN] hw req, type %d, %d channels, flags: 0x%x.\n",
+		  scan->type, scan->num_channels, scan->flags);
+
+	for (i = 0; i < scan->num_channels; ++i)
+		tmo += scan->ch[i].max_chan_time + 10;
+
+	cancel_delayed_work_sync(&priv->clear_recent_scan_work);
+	atomic_set(&priv->scan.in_progress, 1);
+	atomic_set(&priv->recent_scan, 1);
+	cw1200_pm_stay_awake(&priv->pm_state, tmo * HZ / 1000);
+	queue_delayed_work(priv->workqueue, &priv->scan.timeout,
+			   tmo * HZ / 1000);
+	ret = wsm_scan(priv, scan);
+	if (ret) {
+		atomic_set(&priv->scan.in_progress, 0);
+		cancel_delayed_work_sync(&priv->scan.timeout);
+		cw1200_scan_restart_delayed(priv);
+	}
+	return ret;
+}
+
+int cw1200_hw_scan(struct ieee80211_hw *hw,
+		   struct ieee80211_vif *vif,
+		   struct cfg80211_scan_request *req)
+{
+	struct cw1200_common *priv = hw->priv;
+	struct wsm_template_frame frame = {
+		.frame_type = WSM_FRAME_TYPE_PROBE_REQUEST,
+	};
+	int i, ret;
+
+	if (!priv->vif)
+		return -EINVAL;
+
+	/* Scan when P2P_GO corrupt firmware MiniAP mode */
+	if (priv->join_status == CW1200_JOIN_STATUS_AP)
+		return -EOPNOTSUPP;
+
+	if (req->n_ssids == 1 && !req->ssids[0].ssid_len)
+		req->n_ssids = 0;
+
+	wiphy_dbg(hw->wiphy, "[SCAN] Scan request for %d SSIDs.\n",
+		  req->n_ssids);
+
+	if (req->n_ssids > WSM_SCAN_MAX_NUM_OF_SSIDS)
+		return -EINVAL;
+
+	frame.skb = ieee80211_probereq_get(hw, priv->vif, NULL, 0,
+		req->ie_len);
+	if (!frame.skb)
+		return -ENOMEM;
+
+	if (req->ie_len)
+		memcpy(skb_put(frame.skb, req->ie_len), req->ie, req->ie_len);
+
+	/* will be unlocked in cw1200_scan_work() */
+	down(&priv->scan.lock);
+	mutex_lock(&priv->conf_mutex);
+
+	ret = wsm_set_template_frame(priv, &frame);
+	if (!ret) {
+		/* Host want to be the probe responder. */
+		ret = wsm_set_probe_responder(priv, true);
+	}
+	if (ret) {
+		mutex_unlock(&priv->conf_mutex);
+		up(&priv->scan.lock);
+		dev_kfree_skb(frame.skb);
+		return ret;
+	}
+
+	wsm_lock_tx(priv);
+
+	BUG_ON(priv->scan.req);
+	priv->scan.req = req;
+	priv->scan.n_ssids = 0;
+	priv->scan.status = 0;
+	priv->scan.begin = &req->channels[0];
+	priv->scan.curr = priv->scan.begin;
+	priv->scan.end = &req->channels[req->n_channels];
+	priv->scan.output_power = priv->output_power;
+
+	for (i = 0; i < req->n_ssids; ++i) {
+		struct wsm_ssid *dst = &priv->scan.ssids[priv->scan.n_ssids];
+		memcpy(&dst->ssid[0], req->ssids[i].ssid, sizeof(dst->ssid));
+		dst->length = req->ssids[i].ssid_len;
+		++priv->scan.n_ssids;
+	}
+
+	mutex_unlock(&priv->conf_mutex);
+
+	if (frame.skb)
+		dev_kfree_skb(frame.skb);
+	queue_work(priv->workqueue, &priv->scan.work);
+	return 0;
+}
+
+void cw1200_scan_work(struct work_struct *work)
+{
+	struct cw1200_common *priv = container_of(work, struct cw1200_common,
+							scan.work);
+	struct ieee80211_channel **it;
+	struct wsm_scan scan = {
+		.type = WSM_SCAN_TYPE_FOREGROUND,
+		.flags = WSM_SCAN_FLAG_SPLIT_METHOD,
+	};
+	bool first_run = (priv->scan.begin == priv->scan.curr &&
+			  priv->scan.begin != priv->scan.end);
+	int i;
+
+	if (first_run) {
+		/* Firmware gets crazy if scan request is sent
+		 * when STA is joined but not yet associated.
+		 * Force unjoin in this case.
+		 */
+		if (cancel_delayed_work_sync(&priv->join_timeout) > 0)
+			cw1200_join_timeout(&priv->join_timeout.work);
+	}
+
+	mutex_lock(&priv->conf_mutex);
+
+	if (first_run) {
+		if (priv->join_status == CW1200_JOIN_STATUS_STA &&
+		    !(priv->powersave_mode.mode & WSM_PSM_PS)) {
+			struct wsm_set_pm pm = priv->powersave_mode;
+			pm.mode = WSM_PSM_PS;
+			cw1200_set_pm(priv, &pm);
+		} else if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
+			/* FW bug: driver has to restart p2p-dev mode
+			 * after scan
+			 */
+			cw1200_disable_listening(priv);
+		}
+	}
+
+	if (!priv->scan.req || (priv->scan.curr == priv->scan.end)) {
+		if (priv->scan.output_power != priv->output_power)
+			wsm_set_output_power(priv, priv->output_power * 10);
+		if (priv->join_status == CW1200_JOIN_STATUS_STA &&
+		    !(priv->powersave_mode.mode & WSM_PSM_PS))
+			cw1200_set_pm(priv, &priv->powersave_mode);
+
+		if (priv->scan.status < 0)
+			wiphy_dbg(priv->hw->wiphy, "[SCAN] Scan failed (%d).\n",
+				  priv->scan.status);
+		else if (priv->scan.req)
+			wiphy_dbg(priv->hw->wiphy,
+				  "[SCAN] Scan completed.\n");
+		else
+			wiphy_dbg(priv->hw->wiphy,
+				  "[SCAN] Scan canceled.\n");
+
+		priv->scan.req = NULL;
+		cw1200_scan_restart_delayed(priv);
+		wsm_unlock_tx(priv);
+		mutex_unlock(&priv->conf_mutex);
+		ieee80211_scan_completed(priv->hw, priv->scan.status ? 1 : 0);
+		up(&priv->scan.lock);
+		return;
+	} else {
+		struct ieee80211_channel *first = *priv->scan.curr;
+		for (it = priv->scan.curr + 1, i = 1;
+		     it != priv->scan.end && i < WSM_SCAN_MAX_NUM_OF_CHANNELS;
+		     ++it, ++i) {
+			if ((*it)->band != first->band)
+				break;
+			if (((*it)->flags ^ first->flags) &
+					IEEE80211_CHAN_PASSIVE_SCAN)
+				break;
+			if (!(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+			    (*it)->max_power != first->max_power)
+				break;
+		}
+		scan.band = first->band;
+
+		if (priv->scan.req->no_cck)
+			scan.max_tx_rate = WSM_TRANSMIT_RATE_6;
+		else
+			scan.max_tx_rate = WSM_TRANSMIT_RATE_1;
+		scan.num_probes =
+			(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) ? 0 : 2;
+		scan.num_ssids = priv->scan.n_ssids;
+		scan.ssids = &priv->scan.ssids[0];
+		scan.num_channels = it - priv->scan.curr;
+		/* TODO: Is it optimal? */
+		scan.probe_delay = 100;
+		/* It is not stated in WSM specification, however
+		 * FW team says that driver may not use FG scan
+		 * when joined.
+		 */
+		if (priv->join_status == CW1200_JOIN_STATUS_STA) {
+			scan.type = WSM_SCAN_TYPE_BACKGROUND;
+			scan.flags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
+		}
+		scan.ch = kzalloc(
+			sizeof(struct wsm_scan_ch) * (it - priv->scan.curr),
+			GFP_KERNEL);
+		if (!scan.ch) {
+			priv->scan.status = -ENOMEM;
+			goto fail;
+		}
+		for (i = 0; i < scan.num_channels; ++i) {
+			scan.ch[i].number = priv->scan.curr[i]->hw_value;
+			if (priv->scan.curr[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+				scan.ch[i].min_chan_time = 50;
+				scan.ch[i].max_chan_time = 100;
+			} else {
+				scan.ch[i].min_chan_time = 10;
+				scan.ch[i].max_chan_time = 25;
+			}
+		}
+		if (!(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+		    priv->scan.output_power != first->max_power) {
+			priv->scan.output_power = first->max_power;
+			wsm_set_output_power(priv,
+					     priv->scan.output_power * 10);
+		}
+		priv->scan.status = cw1200_scan_start(priv, &scan);
+		kfree(scan.ch);
+		if (priv->scan.status)
+			goto fail;
+		priv->scan.curr = it;
+	}
+	mutex_unlock(&priv->conf_mutex);
+	return;
+
+fail:
+	priv->scan.curr = priv->scan.end;
+	mutex_unlock(&priv->conf_mutex);
+	queue_work(priv->workqueue, &priv->scan.work);
+	return;
+}
+
+static void cw1200_scan_restart_delayed(struct cw1200_common *priv)
+{
+	/* FW bug: driver has to restart p2p-dev mode after scan. */
+	if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
+		cw1200_enable_listening(priv);
+		cw1200_update_filtering(priv);
+	}
+
+	if (priv->delayed_unjoin) {
+		priv->delayed_unjoin = false;
+		if (queue_work(priv->workqueue, &priv->unjoin_work) <= 0)
+			wsm_unlock_tx(priv);
+	} else if (priv->delayed_link_loss) {
+			wiphy_dbg(priv->hw->wiphy, "[CQM] Requeue BSS loss.\n");
+			priv->delayed_link_loss = 0;
+			cw1200_cqm_bssloss_sm(priv, 1, 0, 0);
+	}
+}
+
+static void cw1200_scan_complete(struct cw1200_common *priv)
+{
+	queue_delayed_work(priv->workqueue, &priv->clear_recent_scan_work, HZ);
+	if (priv->scan.direct_probe) {
+		wiphy_dbg(priv->hw->wiphy, "[SCAN] Direct probe complete.\n");
+		cw1200_scan_restart_delayed(priv);
+		priv->scan.direct_probe = 0;
+		up(&priv->scan.lock);
+		wsm_unlock_tx(priv);
+	} else {
+		cw1200_scan_work(&priv->scan.work);
+	}
+}
+
+void cw1200_scan_failed_cb(struct cw1200_common *priv)
+{
+	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+		/* STA is stopped. */
+		return;
+
+	if (cancel_delayed_work_sync(&priv->scan.timeout) > 0) {
+		priv->scan.status = -EIO;
+		queue_delayed_work(priv->workqueue, &priv->scan.timeout, 0);
+	}
+}
+
+
+void cw1200_scan_complete_cb(struct cw1200_common *priv,
+				struct wsm_scan_complete *arg)
+{
+	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+		/* STA is stopped. */
+		return;
+
+	if (cancel_delayed_work_sync(&priv->scan.timeout) > 0) {
+		priv->scan.status = 1;
+		queue_delayed_work(priv->workqueue, &priv->scan.timeout, 0);
+	}
+}
+
+void cw1200_clear_recent_scan_work(struct work_struct *work)
+{
+	struct cw1200_common *priv =
+		container_of(work, struct cw1200_common,
+			     clear_recent_scan_work.work);
+	atomic_xchg(&priv->recent_scan, 0);
+}
+
+void cw1200_scan_timeout(struct work_struct *work)
+{
+	struct cw1200_common *priv =
+		container_of(work, struct cw1200_common, scan.timeout.work);
+	if (atomic_xchg(&priv->scan.in_progress, 0)) {
+		if (priv->scan.status > 0) {
+			priv->scan.status = 0;
+		} else if (!priv->scan.status) {
+			wiphy_warn(priv->hw->wiphy,
+				   "Timeout waiting for scan complete notification.\n");
+			priv->scan.status = -ETIMEDOUT;
+			priv->scan.curr = priv->scan.end;
+			wsm_stop_scan(priv);
+		}
+		cw1200_scan_complete(priv);
+	}
+}
+
+void cw1200_probe_work(struct work_struct *work)
+{
+	struct cw1200_common *priv =
+		container_of(work, struct cw1200_common, scan.probe_work.work);
+	u8 queue_id = cw1200_queue_get_queue_id(priv->pending_frame_id);
+	struct cw1200_queue *queue = &priv->tx_queue[queue_id];
+	const struct cw1200_txpriv *txpriv;
+	struct wsm_tx *wsm;
+	struct wsm_template_frame frame = {
+		.frame_type = WSM_FRAME_TYPE_PROBE_REQUEST,
+	};
+	struct wsm_ssid ssids[1] = {{
+		.length = 0,
+	} };
+	struct wsm_scan_ch ch[1] = {{
+		.min_chan_time = 0,
+		.max_chan_time = 10,
+	} };
+	struct wsm_scan scan = {
+		.type = WSM_SCAN_TYPE_FOREGROUND,
+		.num_probes = 1,
+		.probe_delay = 0,
+		.num_channels = 1,
+		.ssids = ssids,
+		.ch = ch,
+	};
+	u8 *ies;
+	size_t ies_len;
+	int ret;
+
+	wiphy_dbg(priv->hw->wiphy, "[SCAN] Direct probe work.\n");
+
+	mutex_lock(&priv->conf_mutex);
+	if (down_trylock(&priv->scan.lock)) {
+		/* Scan is already in progress. Requeue self. */
+		schedule();
+		queue_delayed_work(priv->workqueue,
+				   &priv->scan.probe_work, HZ / 10);
+		mutex_unlock(&priv->conf_mutex);
+		return;
+	}
+
+	/* Make sure we still have a pending probe req */
+	if (cw1200_queue_get_skb(queue,	priv->pending_frame_id,
+				 &frame.skb, &txpriv)) {
+		up(&priv->scan.lock);
+		mutex_unlock(&priv->conf_mutex);
+		wsm_unlock_tx(priv);
+		return;
+	}
+	wsm = (struct wsm_tx *)frame.skb->data;
+	scan.max_tx_rate = wsm->max_tx_rate;
+	scan.band = (priv->channel->band == IEEE80211_BAND_5GHZ) ?
+		WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G;
+	if (priv->join_status == CW1200_JOIN_STATUS_STA ||
+	    priv->join_status == CW1200_JOIN_STATUS_IBSS) {
+		scan.type = WSM_SCAN_TYPE_BACKGROUND;
+		scan.flags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
+	}
+	ch[0].number = priv->channel->hw_value;
+
+	skb_pull(frame.skb, txpriv->offset);
+
+	ies = &frame.skb->data[sizeof(struct ieee80211_hdr_3addr)];
+	ies_len = frame.skb->len - sizeof(struct ieee80211_hdr_3addr);
+
+	if (ies_len) {
+		u8 *ssidie =
+			(u8 *)cfg80211_find_ie(WLAN_EID_SSID, ies, ies_len);
+		if (ssidie && ssidie[1] && ssidie[1] <= sizeof(ssids[0].ssid)) {
+			u8 *nextie = &ssidie[2 + ssidie[1]];
+			/* Remove SSID from the IE list. It has to be provided
+			 * as a separate argument in cw1200_scan_start call
+			 */
+
+			/* Store SSID localy */
+			ssids[0].length = ssidie[1];
+			memcpy(ssids[0].ssid, &ssidie[2], ssids[0].length);
+			scan.num_ssids = 1;
+
+			/* Remove SSID from IE list */
+			ssidie[1] = 0;
+			memmove(&ssidie[2], nextie, &ies[ies_len] - nextie);
+			skb_trim(frame.skb, frame.skb->len - ssids[0].length);
+		}
+	}
+
+	/* FW bug: driver has to restart p2p-dev mode after scan */
+	if (priv->join_status == CW1200_JOIN_STATUS_MONITOR)
+		cw1200_disable_listening(priv);
+	ret = wsm_set_template_frame(priv, &frame);
+	priv->scan.direct_probe = 1;
+	if (!ret) {
+		wsm_flush_tx(priv);
+		ret = cw1200_scan_start(priv, &scan);
+	}
+	mutex_unlock(&priv->conf_mutex);
+
+	skb_push(frame.skb, txpriv->offset);
+	if (!ret)
+		IEEE80211_SKB_CB(frame.skb)->flags |= IEEE80211_TX_STAT_ACK;
+	BUG_ON(cw1200_queue_remove(queue, priv->pending_frame_id));
+
+	if (ret) {
+		priv->scan.direct_probe = 0;
+		up(&priv->scan.lock);
+		wsm_unlock_tx(priv);
+	}
+
+	return;
+}