Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Sanity check URB networking device parameters to avoid divide by
    zero, from Oliver Neukum.

 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
    don't work properly. Longer term this needs a better fix tho. From
    Vijay Khemka.

 3) Small fixes to selftests (use ping when ping6 is not present, etc.)
    from David Ahern.

 4) Bring back rt_uses_gateway member of struct rtable, it's semantics
    were not well understood and trying to remove it broke things. From
    David Ahern.

 5) Move usbnet snaity checking, ignore endpoints with invalid
    wMaxPacketSize. From Bjørn Mork.

 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.

 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
    Alex Vesker, and Yevgeny Kliteynik

 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.

 9) Fix crash when removing sch_cbs entry while offloading is enabled,
    from Vinicius Costa Gomes.

10) Signedness bug fixes, generally in looking at the result given by
    of_get_phy_mode() and friends. From Dan Crapenter.

11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.

12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.

13) Fix quantization code in tcp_bbr, from Kevin Yang.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
  net: tap: clean up an indentation issue
  nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
  tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
  sk_buff: drop all skb extensions on free and skb scrubbing
  tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
  mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
  Documentation: Clarify trap's description
  mlxsw: spectrum: Clear VLAN filters during port initialization
  net: ena: clean up indentation issue
  NFC: st95hf: clean up indentation issue
  net: phy: micrel: add Asym Pause workaround for KSZ9021
  net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
  ptp: correctly disable flags on old ioctls
  lib: dimlib: fix help text typos
  net: dsa: microchip: Always set regmap stride to 1
  nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
  nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
  net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
  vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
  net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
  ...

1 files changed, 58 insertions, 58 deletions

diff --git a/drivers/net/wireless/intel/ipw2x00/Kconfig b/drivers/net/wireless/intel/ipw2x00/Kconfig
index 5d2878a73732..ab17903ba9f8 100644
--- a/drivers/net/wireless/intel/ipw2x00/Kconfig
+++ b/drivers/net/wireless/intel/ipw2x00/Kconfig
@@ -13,37 +13,37 @@ config IPW2100
 	select LIB80211
 	select LIBIPW
 	---help---
-          A driver for the Intel PRO/Wireless 2100 Network 
+	  A driver for the Intel PRO/Wireless 2100 Network
 	  Connection 802.11b wireless network adapter.
 
-          See <file:Documentation/networking/device_drivers/intel/ipw2100.txt>
+	  See <file:Documentation/networking/device_drivers/intel/ipw2100.txt>
 	  for information on the capabilities currently enabled in this driver
 	  and for tips for debugging issues and problems.
 
 	  In order to use this driver, you will need a firmware image for it.
-          You can obtain the firmware from
-	  <http://ipw2100.sf.net/>.  Once you have the firmware image, you 
+	  You can obtain the firmware from
+	  <http://ipw2100.sf.net/>.  Once you have the firmware image, you
 	  will need to place it in /lib/firmware.
 
-          You will also very likely need the Wireless Tools in order to
-          configure your card:
+	  You will also very likely need the Wireless Tools in order to
+	  configure your card:
 
-          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+	  It is recommended that you compile this driver as a module (M)
+	  rather than built-in (Y). This driver requires firmware at device
+	  initialization time, and when built-in this typically happens
+	  before the filesystem is accessible (hence firmware will be
+	  unavailable and initialization will fail). If you do choose to build
+	  this driver into your kernel image, you can avoid this problem by
+	  including the firmware and a firmware loader in an initramfs.
 
-          It is recommended that you compile this driver as a module (M)
-          rather than built-in (Y). This driver requires firmware at device
-          initialization time, and when built-in this typically happens
-          before the filesystem is accessible (hence firmware will be
-          unavailable and initialization will fail). If you do choose to build
-          this driver into your kernel image, you can avoid this problem by
-          including the firmware and a firmware loader in an initramfs.
- 
 config IPW2100_MONITOR
-        bool "Enable promiscuous mode"
-        depends on IPW2100
-        ---help---
+	bool "Enable promiscuous mode"
+	depends on IPW2100
+	---help---
 	  Enables promiscuous/monitor mode support for the ipw2100 driver.
-	  With this feature compiled into the driver, you can switch to 
+	  With this feature compiled into the driver, you can switch to
 	  promiscuous mode via the Wireless Tool's Monitor mode.  While in this
 	  mode, no packets can be sent.
 
@@ -51,17 +51,17 @@ config IPW2100_DEBUG
 	bool "Enable full debugging output in IPW2100 module."
 	depends on IPW2100
 	---help---
-	  This option will enable debug tracing output for the IPW2100.  
+	  This option will enable debug tracing output for the IPW2100.
 
-	  This will result in the kernel module being ~60k larger.  You can 
-	  control which debug output is sent to the kernel log by setting the 
-	  value in 
+	  This will result in the kernel module being ~60k larger.  You can
+	  control which debug output is sent to the kernel log by setting the
+	  value in
 
 	  /sys/bus/pci/drivers/ipw2100/debug_level
 
 	  This entry will only exist if this option is enabled.
 
-	  If you are not trying to debug or develop the IPW2100 driver, you 
+	  If you are not trying to debug or develop the IPW2100 driver, you
 	  most likely want to say N here.
 
 config IPW2200
@@ -75,37 +75,37 @@ config IPW2200
 	select LIB80211
 	select LIBIPW
 	---help---
-          A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
-	  Connection adapters. 
+	  A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
+	  Connection adapters.
 
-          See <file:Documentation/networking/device_drivers/intel/ipw2200.txt>
+	  See <file:Documentation/networking/device_drivers/intel/ipw2200.txt>
 	  for information on the capabilities currently enabled in this
 	  driver and for tips for debugging issues and problems.
 
 	  In order to use this driver, you will need a firmware image for it.
-          You can obtain the firmware from
-	  <http://ipw2200.sf.net/>.  See the above referenced README.ipw2200 
+	  You can obtain the firmware from
+	  <http://ipw2200.sf.net/>.  See the above referenced README.ipw2200
 	  for information on where to install the firmware images.
 
-          You will also very likely need the Wireless Tools in order to
-          configure your card:
+	  You will also very likely need the Wireless Tools in order to
+	  configure your card:
 
-          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 
-          It is recommended that you compile this driver as a module (M)
-          rather than built-in (Y). This driver requires firmware at device
-          initialization time, and when built-in this typically happens
-          before the filesystem is accessible (hence firmware will be
-          unavailable and initialization will fail). If you do choose to build
-          this driver into your kernel image, you can avoid this problem by
-          including the firmware and a firmware loader in an initramfs.
+	  It is recommended that you compile this driver as a module (M)
+	  rather than built-in (Y). This driver requires firmware at device
+	  initialization time, and when built-in this typically happens
+	  before the filesystem is accessible (hence firmware will be
+	  unavailable and initialization will fail). If you do choose to build
+	  this driver into your kernel image, you can avoid this problem by
+	  including the firmware and a firmware loader in an initramfs.
 
 config IPW2200_MONITOR
-        bool "Enable promiscuous mode"
-        depends on IPW2200
-        ---help---
+	bool "Enable promiscuous mode"
+	depends on IPW2200
+	---help---
 	  Enables promiscuous/monitor mode support for the ipw2200 driver.
-	  With this feature compiled into the driver, you can switch to 
+	  With this feature compiled into the driver, you can switch to
 	  promiscuous mode via the Wireless Tool's Monitor mode.  While in this
 	  mode, no packets can be sent.
 
@@ -118,28 +118,28 @@ config IPW2200_PROMISCUOUS
 	depends on IPW2200_MONITOR
 	select IPW2200_RADIOTAP
 	---help---
-          Enables the creation of a second interface prefixed 'rtap'. 
-          This second interface will provide every received in radiotap
+	  Enables the creation of a second interface prefixed 'rtap'.
+	  This second interface will provide every received in radiotap
 	  format.
 
-          This is useful for performing wireless network analysis while
-          maintaining an active association.
+	  This is useful for performing wireless network analysis while
+	  maintaining an active association.
+
+	  Example usage:
 
-          Example usage:
+	    % modprobe ipw2200 rtap_iface=1
+	    % ifconfig rtap0 up
+	    % tethereal -i rtap0
 
-            % modprobe ipw2200 rtap_iface=1
-            % ifconfig rtap0 up
-            % tethereal -i rtap0
+	  If you do not specify 'rtap_iface=1' as a module parameter then
+	  the rtap interface will not be created and you will need to turn
+	  it on via sysfs:
 
-          If you do not specify 'rtap_iface=1' as a module parameter then 
-          the rtap interface will not be created and you will need to turn 
-          it on via sysfs:
-	
-            % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
+	    % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
 
 config IPW2200_QOS
-        bool "Enable QoS support"
-        depends on IPW2200
+	bool "Enable QoS support"
+	depends on IPW2200
 
 config IPW2200_DEBUG
 	bool "Enable full debugging output in IPW2200 module."