Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

1 files changed, 426 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/rs.h b/drivers/net/wireless/intel/iwlwifi/dvm/rs.h
new file mode 100644
index 000000000000..c5fe44584613
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/rs.h
@@ -0,0 +1,426 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <linuxwifi@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#ifndef __iwl_agn_rs_h__
+#define __iwl_agn_rs_h__
+
+#include <net/mac80211.h>
+
+#include "iwl-config.h"
+
+#include "commands.h"
+
+struct iwl_rate_info {
+	u8 plcp;	/* uCode API:  IWL_RATE_6M_PLCP, etc. */
+	u8 plcp_siso;	/* uCode API:  IWL_RATE_SISO_6M_PLCP, etc. */
+	u8 plcp_mimo2;	/* uCode API:  IWL_RATE_MIMO2_6M_PLCP, etc. */
+	u8 plcp_mimo3;  /* uCode API:  IWL_RATE_MIMO3_6M_PLCP, etc. */
+	u8 ieee;	/* MAC header:  IWL_RATE_6M_IEEE, etc. */
+	u8 prev_ieee;    /* previous rate in IEEE speeds */
+	u8 next_ieee;    /* next rate in IEEE speeds */
+	u8 prev_rs;      /* previous rate used in rs algo */
+	u8 next_rs;      /* next rate used in rs algo */
+	u8 prev_rs_tgg;  /* previous rate used in TGG rs algo */
+	u8 next_rs_tgg;  /* next rate used in TGG rs algo */
+};
+
+/*
+ * These serve as indexes into
+ * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
+ */
+enum {
+	IWL_RATE_1M_INDEX = 0,
+	IWL_RATE_2M_INDEX,
+	IWL_RATE_5M_INDEX,
+	IWL_RATE_11M_INDEX,
+	IWL_RATE_6M_INDEX,
+	IWL_RATE_9M_INDEX,
+	IWL_RATE_12M_INDEX,
+	IWL_RATE_18M_INDEX,
+	IWL_RATE_24M_INDEX,
+	IWL_RATE_36M_INDEX,
+	IWL_RATE_48M_INDEX,
+	IWL_RATE_54M_INDEX,
+	IWL_RATE_60M_INDEX,
+	IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/
+	IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1,	/* Excluding 60M */
+	IWL_RATE_INVM_INDEX = IWL_RATE_COUNT,
+	IWL_RATE_INVALID = IWL_RATE_COUNT,
+};
+
+enum {
+	IWL_RATE_6M_INDEX_TABLE = 0,
+	IWL_RATE_9M_INDEX_TABLE,
+	IWL_RATE_12M_INDEX_TABLE,
+	IWL_RATE_18M_INDEX_TABLE,
+	IWL_RATE_24M_INDEX_TABLE,
+	IWL_RATE_36M_INDEX_TABLE,
+	IWL_RATE_48M_INDEX_TABLE,
+	IWL_RATE_54M_INDEX_TABLE,
+	IWL_RATE_1M_INDEX_TABLE,
+	IWL_RATE_2M_INDEX_TABLE,
+	IWL_RATE_5M_INDEX_TABLE,
+	IWL_RATE_11M_INDEX_TABLE,
+	IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX - 1,
+};
+
+enum {
+	IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
+	IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX,
+	IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
+	IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX,
+};
+
+/* #define vs. enum to keep from defaulting to 'large integer' */
+#define	IWL_RATE_6M_MASK   (1 << IWL_RATE_6M_INDEX)
+#define	IWL_RATE_9M_MASK   (1 << IWL_RATE_9M_INDEX)
+#define	IWL_RATE_12M_MASK  (1 << IWL_RATE_12M_INDEX)
+#define	IWL_RATE_18M_MASK  (1 << IWL_RATE_18M_INDEX)
+#define	IWL_RATE_24M_MASK  (1 << IWL_RATE_24M_INDEX)
+#define	IWL_RATE_36M_MASK  (1 << IWL_RATE_36M_INDEX)
+#define	IWL_RATE_48M_MASK  (1 << IWL_RATE_48M_INDEX)
+#define	IWL_RATE_54M_MASK  (1 << IWL_RATE_54M_INDEX)
+#define IWL_RATE_60M_MASK  (1 << IWL_RATE_60M_INDEX)
+#define	IWL_RATE_1M_MASK   (1 << IWL_RATE_1M_INDEX)
+#define	IWL_RATE_2M_MASK   (1 << IWL_RATE_2M_INDEX)
+#define	IWL_RATE_5M_MASK   (1 << IWL_RATE_5M_INDEX)
+#define	IWL_RATE_11M_MASK  (1 << IWL_RATE_11M_INDEX)
+
+/* uCode API values for legacy bit rates, both OFDM and CCK */
+enum {
+	IWL_RATE_6M_PLCP  = 13,
+	IWL_RATE_9M_PLCP  = 15,
+	IWL_RATE_12M_PLCP = 5,
+	IWL_RATE_18M_PLCP = 7,
+	IWL_RATE_24M_PLCP = 9,
+	IWL_RATE_36M_PLCP = 11,
+	IWL_RATE_48M_PLCP = 1,
+	IWL_RATE_54M_PLCP = 3,
+	IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/
+	IWL_RATE_1M_PLCP  = 10,
+	IWL_RATE_2M_PLCP  = 20,
+	IWL_RATE_5M_PLCP  = 55,
+	IWL_RATE_11M_PLCP = 110,
+	/*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */
+	/*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/
+};
+
+/* uCode API values for OFDM high-throughput (HT) bit rates */
+enum {
+	IWL_RATE_SISO_6M_PLCP = 0,
+	IWL_RATE_SISO_12M_PLCP = 1,
+	IWL_RATE_SISO_18M_PLCP = 2,
+	IWL_RATE_SISO_24M_PLCP = 3,
+	IWL_RATE_SISO_36M_PLCP = 4,
+	IWL_RATE_SISO_48M_PLCP = 5,
+	IWL_RATE_SISO_54M_PLCP = 6,
+	IWL_RATE_SISO_60M_PLCP = 7,
+	IWL_RATE_MIMO2_6M_PLCP  = 0x8,
+	IWL_RATE_MIMO2_12M_PLCP = 0x9,
+	IWL_RATE_MIMO2_18M_PLCP = 0xa,
+	IWL_RATE_MIMO2_24M_PLCP = 0xb,
+	IWL_RATE_MIMO2_36M_PLCP = 0xc,
+	IWL_RATE_MIMO2_48M_PLCP = 0xd,
+	IWL_RATE_MIMO2_54M_PLCP = 0xe,
+	IWL_RATE_MIMO2_60M_PLCP = 0xf,
+	IWL_RATE_MIMO3_6M_PLCP  = 0x10,
+	IWL_RATE_MIMO3_12M_PLCP = 0x11,
+	IWL_RATE_MIMO3_18M_PLCP = 0x12,
+	IWL_RATE_MIMO3_24M_PLCP = 0x13,
+	IWL_RATE_MIMO3_36M_PLCP = 0x14,
+	IWL_RATE_MIMO3_48M_PLCP = 0x15,
+	IWL_RATE_MIMO3_54M_PLCP = 0x16,
+	IWL_RATE_MIMO3_60M_PLCP = 0x17,
+	IWL_RATE_SISO_INVM_PLCP,
+	IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
+	IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
+};
+
+/* MAC header values for bit rates */
+enum {
+	IWL_RATE_6M_IEEE  = 12,
+	IWL_RATE_9M_IEEE  = 18,
+	IWL_RATE_12M_IEEE = 24,
+	IWL_RATE_18M_IEEE = 36,
+	IWL_RATE_24M_IEEE = 48,
+	IWL_RATE_36M_IEEE = 72,
+	IWL_RATE_48M_IEEE = 96,
+	IWL_RATE_54M_IEEE = 108,
+	IWL_RATE_60M_IEEE = 120,
+	IWL_RATE_1M_IEEE  = 2,
+	IWL_RATE_2M_IEEE  = 4,
+	IWL_RATE_5M_IEEE  = 11,
+	IWL_RATE_11M_IEEE = 22,
+};
+
+#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1)
+
+#define IWL_INVALID_VALUE    -1
+
+#define IWL_MIN_RSSI_VAL                 -100
+#define IWL_MAX_RSSI_VAL                    0
+
+/* These values specify how many Tx frame attempts before
+ * searching for a new modulation mode */
+#define IWL_LEGACY_FAILURE_LIMIT	160
+#define IWL_LEGACY_SUCCESS_LIMIT	480
+#define IWL_LEGACY_TABLE_COUNT		160
+
+#define IWL_NONE_LEGACY_FAILURE_LIMIT	400
+#define IWL_NONE_LEGACY_SUCCESS_LIMIT	4500
+#define IWL_NONE_LEGACY_TABLE_COUNT	1500
+
+/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
+#define IWL_RS_GOOD_RATIO		12800	/* 100% */
+#define IWL_RATE_SCALE_SWITCH		10880	/*  85% */
+#define IWL_RATE_HIGH_TH		10880	/*  85% */
+#define IWL_RATE_INCREASE_TH		6400	/*  50% */
+#define IWL_RATE_DECREASE_TH		1920	/*  15% */
+
+/* possible actions when in legacy mode */
+#define IWL_LEGACY_SWITCH_ANTENNA1      0
+#define IWL_LEGACY_SWITCH_ANTENNA2      1
+#define IWL_LEGACY_SWITCH_SISO          2
+#define IWL_LEGACY_SWITCH_MIMO2_AB      3
+#define IWL_LEGACY_SWITCH_MIMO2_AC      4
+#define IWL_LEGACY_SWITCH_MIMO2_BC      5
+#define IWL_LEGACY_SWITCH_MIMO3_ABC     6
+
+/* possible actions when in siso mode */
+#define IWL_SISO_SWITCH_ANTENNA1        0
+#define IWL_SISO_SWITCH_ANTENNA2        1
+#define IWL_SISO_SWITCH_MIMO2_AB        2
+#define IWL_SISO_SWITCH_MIMO2_AC        3
+#define IWL_SISO_SWITCH_MIMO2_BC        4
+#define IWL_SISO_SWITCH_GI              5
+#define IWL_SISO_SWITCH_MIMO3_ABC       6
+
+
+/* possible actions when in mimo mode */
+#define IWL_MIMO2_SWITCH_ANTENNA1       0
+#define IWL_MIMO2_SWITCH_ANTENNA2       1
+#define IWL_MIMO2_SWITCH_SISO_A         2
+#define IWL_MIMO2_SWITCH_SISO_B         3
+#define IWL_MIMO2_SWITCH_SISO_C         4
+#define IWL_MIMO2_SWITCH_GI             5
+#define IWL_MIMO2_SWITCH_MIMO3_ABC      6
+
+
+/* possible actions when in mimo3 mode */
+#define IWL_MIMO3_SWITCH_ANTENNA1       0
+#define IWL_MIMO3_SWITCH_ANTENNA2       1
+#define IWL_MIMO3_SWITCH_SISO_A         2
+#define IWL_MIMO3_SWITCH_SISO_B         3
+#define IWL_MIMO3_SWITCH_SISO_C         4
+#define IWL_MIMO3_SWITCH_MIMO2_AB       5
+#define IWL_MIMO3_SWITCH_MIMO2_AC       6
+#define IWL_MIMO3_SWITCH_MIMO2_BC       7
+#define IWL_MIMO3_SWITCH_GI             8
+
+
+#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI
+#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC
+
+/*FIXME:RS:add possible actions for MIMO3*/
+
+#define IWL_ACTION_LIMIT		3	/* # possible actions */
+
+#define LQ_SIZE		2	/* 2 mode tables:  "Active" and "Search" */
+
+/* load per tid defines for A-MPDU activation */
+#define IWL_AGG_TPT_THREHOLD	0
+#define IWL_AGG_LOAD_THRESHOLD	10
+#define IWL_AGG_ALL_TID		0xff
+#define TID_QUEUE_CELL_SPACING	50	/*mS */
+#define TID_QUEUE_MAX_SIZE	20
+#define TID_ROUND_VALUE		5	/* mS */
+
+#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
+#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
+
+extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
+
+enum iwl_table_type {
+	LQ_NONE,
+	LQ_G,		/* legacy types */
+	LQ_A,
+	LQ_SISO,	/* high-throughput types */
+	LQ_MIMO2,
+	LQ_MIMO3,
+	LQ_MAX,
+};
+
+#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A))
+#define is_siso(tbl) ((tbl) == LQ_SISO)
+#define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
+#define is_mimo3(tbl) ((tbl) == LQ_MIMO3)
+#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl))
+#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
+#define is_a_band(tbl) ((tbl) == LQ_A)
+#define is_g_and(tbl) ((tbl) == LQ_G)
+
+#define IWL_MAX_MCS_DISPLAY_SIZE	12
+
+struct iwl_rate_mcs_info {
+	char	mbps[IWL_MAX_MCS_DISPLAY_SIZE];
+	char	mcs[IWL_MAX_MCS_DISPLAY_SIZE];
+};
+
+/**
+ * struct iwl_rate_scale_data -- tx success history for one rate
+ */
+struct iwl_rate_scale_data {
+	u64 data;		/* bitmap of successful frames */
+	s32 success_counter;	/* number of frames successful */
+	s32 success_ratio;	/* per-cent * 128  */
+	s32 counter;		/* number of frames attempted */
+	s32 average_tpt;	/* success ratio * expected throughput */
+	unsigned long stamp;
+};
+
+/**
+ * struct iwl_scale_tbl_info -- tx params and success history for all rates
+ *
+ * There are two of these in struct iwl_lq_sta,
+ * one for "active", and one for "search".
+ */
+struct iwl_scale_tbl_info {
+	enum iwl_table_type lq_type;
+	u8 ant_type;
+	u8 is_SGI;	/* 1 = short guard interval */
+	u8 is_ht40;	/* 1 = 40 MHz channel width */
+	u8 is_dup;	/* 1 = duplicated data streams */
+	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
+	u8 max_search;	/* maximun number of tables we can search */
+	const u16 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
+	u32 current_rate;  /* rate_n_flags, uCode API format */
+	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
+};
+
+struct iwl_traffic_load {
+	unsigned long time_stamp;	/* age of the oldest statistics */
+	u32 packet_count[TID_QUEUE_MAX_SIZE];   /* packet count in this time
+						 * slice */
+	u32 total;			/* total num of packets during the
+					 * last TID_MAX_TIME_DIFF */
+	u8 queue_count;			/* number of queues that has
+					 * been used since the last cleanup */
+	u8 head;			/* start of the circular buffer */
+};
+
+/**
+ * struct iwl_lq_sta -- driver's rate scaling private structure
+ *
+ * Pointer to this gets passed back and forth between driver and mac80211.
+ */
+struct iwl_lq_sta {
+	u8 active_tbl;		/* index of active table, range 0-1 */
+	u8 enable_counter;	/* indicates HT mode */
+	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
+	u8 search_better_tbl;	/* 1: currently trying alternate mode */
+	s32 last_tpt;
+
+	/* The following determine when to search for a new mode */
+	u32 table_count_limit;
+	u32 max_failure_limit;	/* # failed frames before new search */
+	u32 max_success_limit;	/* # successful frames before new search */
+	u32 table_count;
+	u32 total_failed;	/* total failed frames, any/all rates */
+	u32 total_success;	/* total successful frames, any/all rates */
+	u64 flush_timer;	/* time staying in mode before new search */
+
+	u8 action_counter;	/* # mode-switch actions tried */
+	u8 is_green;
+	u8 is_dup;
+	enum ieee80211_band band;
+
+	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
+	u32 supp_rates;
+	u16 active_legacy_rate;
+	u16 active_siso_rate;
+	u16 active_mimo2_rate;
+	u16 active_mimo3_rate;
+	s8 max_rate_idx;     /* Max rate set by user */
+	u8 missed_rate_counter;
+
+	struct iwl_link_quality_cmd lq;
+	struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
+	struct iwl_traffic_load load[IWL_MAX_TID_COUNT];
+	u8 tx_agg_tid_en;
+#ifdef CONFIG_MAC80211_DEBUGFS
+	struct dentry *rs_sta_dbgfs_scale_table_file;
+	struct dentry *rs_sta_dbgfs_stats_table_file;
+	struct dentry *rs_sta_dbgfs_rate_scale_data_file;
+	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
+	u32 dbg_fixed_rate;
+#endif
+	struct iwl_priv *drv;
+
+	/* used to be in sta_info */
+	int last_txrate_idx;
+	/* last tx rate_n_flags */
+	u32 last_rate_n_flags;
+	/* packets destined for this STA are aggregated */
+	u8 is_agg;
+	/* BT traffic this sta was last updated in */
+	u8 last_bt_traffic;
+};
+
+static inline u8 first_antenna(u8 mask)
+{
+	if (mask & ANT_A)
+		return ANT_A;
+	if (mask & ANT_B)
+		return ANT_B;
+	return ANT_C;
+}
+
+
+/* Initialize station's rate scaling information after adding station */
+void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta,
+		      u8 sta_id);
+
+/**
+ * iwl_rate_control_register - Register the rate control algorithm callbacks
+ *
+ * Since the rate control algorithm is hardware specific, there is no need
+ * or reason to place it as a stand alone module.  The driver can call
+ * iwl_rate_control_register in order to register the rate control callbacks
+ * with the mac80211 subsystem.  This should be performed prior to calling
+ * ieee80211_register_hw
+ *
+ */
+int iwlagn_rate_control_register(void);
+
+/**
+ * iwl_rate_control_unregister - Unregister the rate control callbacks
+ *
+ * This should be called after calling ieee80211_unregister_hw, but before
+ * the driver is unloaded.
+ */
+void iwlagn_rate_control_unregister(void);
+
+#endif /* __iwl_agn__rs__ */