Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

1 files changed, 1854 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h
new file mode 100644
index 000000000000..82049bb139c2
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h
@@ -0,0 +1,1854 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016        Intel Deutschland GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <linuxwifi@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016        Intel Deutschland GmbH
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#ifndef __fw_api_h__
+#define __fw_api_h__
+
+#include "fw-api-rs.h"
+#include "fw-api-rx.h"
+#include "fw-api-tx.h"
+#include "fw-api-sta.h"
+#include "fw-api-mac.h"
+#include "fw-api-power.h"
+#include "fw-api-d3.h"
+#include "fw-api-coex.h"
+#include "fw-api-scan.h"
+#include "fw-api-stats.h"
+#include "fw-api-tof.h"
+
+/* Tx queue numbers */
+enum {
+	IWL_MVM_OFFCHANNEL_QUEUE = 8,
+	IWL_MVM_CMD_QUEUE = 9,
+};
+
+enum iwl_mvm_tx_fifo {
+	IWL_MVM_TX_FIFO_BK = 0,
+	IWL_MVM_TX_FIFO_BE,
+	IWL_MVM_TX_FIFO_VI,
+	IWL_MVM_TX_FIFO_VO,
+	IWL_MVM_TX_FIFO_MCAST = 5,
+	IWL_MVM_TX_FIFO_CMD = 7,
+};
+
+#define IWL_MVM_STATION_COUNT	16
+
+#define IWL_MVM_TDLS_STA_COUNT	4
+
+/* commands */
+enum {
+	MVM_ALIVE = 0x1,
+	REPLY_ERROR = 0x2,
+	ECHO_CMD = 0x3,
+
+	INIT_COMPLETE_NOTIF = 0x4,
+
+	/* PHY context commands */
+	PHY_CONTEXT_CMD = 0x8,
+	DBG_CFG = 0x9,
+	ANTENNA_COUPLING_NOTIFICATION = 0xa,
+
+	/* UMAC scan commands */
+	SCAN_ITERATION_COMPLETE_UMAC = 0xb5,
+	SCAN_CFG_CMD = 0xc,
+	SCAN_REQ_UMAC = 0xd,
+	SCAN_ABORT_UMAC = 0xe,
+	SCAN_COMPLETE_UMAC = 0xf,
+
+	/* station table */
+	ADD_STA_KEY = 0x17,
+	ADD_STA = 0x18,
+	REMOVE_STA = 0x19,
+
+	/* paging get item */
+	FW_GET_ITEM_CMD = 0x1a,
+
+	/* TX */
+	TX_CMD = 0x1c,
+	TXPATH_FLUSH = 0x1e,
+	MGMT_MCAST_KEY = 0x1f,
+
+	/* scheduler config */
+	SCD_QUEUE_CFG = 0x1d,
+
+	/* global key */
+	WEP_KEY = 0x20,
+
+	/* Memory */
+	SHARED_MEM_CFG = 0x25,
+
+	/* TDLS */
+	TDLS_CHANNEL_SWITCH_CMD = 0x27,
+	TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa,
+	TDLS_CONFIG_CMD = 0xa7,
+
+	/* MAC and Binding commands */
+	MAC_CONTEXT_CMD = 0x28,
+	TIME_EVENT_CMD = 0x29, /* both CMD and response */
+	TIME_EVENT_NOTIFICATION = 0x2a,
+	BINDING_CONTEXT_CMD = 0x2b,
+	TIME_QUOTA_CMD = 0x2c,
+	NON_QOS_TX_COUNTER_CMD = 0x2d,
+
+	LQ_CMD = 0x4e,
+
+	/* paging block to FW cpu2 */
+	FW_PAGING_BLOCK_CMD = 0x4f,
+
+	/* Scan offload */
+	SCAN_OFFLOAD_REQUEST_CMD = 0x51,
+	SCAN_OFFLOAD_ABORT_CMD = 0x52,
+	HOT_SPOT_CMD = 0x53,
+	SCAN_OFFLOAD_COMPLETE = 0x6D,
+	SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E,
+	SCAN_OFFLOAD_CONFIG_CMD = 0x6f,
+	MATCH_FOUND_NOTIFICATION = 0xd9,
+	SCAN_ITERATION_COMPLETE = 0xe7,
+
+	/* Phy */
+	PHY_CONFIGURATION_CMD = 0x6a,
+	CALIB_RES_NOTIF_PHY_DB = 0x6b,
+	/* PHY_DB_CMD = 0x6c, */
+
+	/* ToF - 802.11mc FTM */
+	TOF_CMD = 0x10,
+	TOF_NOTIFICATION = 0x11,
+
+	/* Power - legacy power table command */
+	POWER_TABLE_CMD = 0x77,
+	PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
+	LTR_CONFIG = 0xee,
+
+	/* Thermal Throttling*/
+	REPLY_THERMAL_MNG_BACKOFF = 0x7e,
+
+	/* Set/Get DC2DC frequency tune */
+	DC2DC_CONFIG_CMD = 0x83,
+
+	/* NVM */
+	NVM_ACCESS_CMD = 0x88,
+
+	SET_CALIB_DEFAULT_CMD = 0x8e,
+
+	BEACON_NOTIFICATION = 0x90,
+	BEACON_TEMPLATE_CMD = 0x91,
+	TX_ANT_CONFIGURATION_CMD = 0x98,
+	STATISTICS_CMD = 0x9c,
+	STATISTICS_NOTIFICATION = 0x9d,
+	EOSP_NOTIFICATION = 0x9e,
+	REDUCE_TX_POWER_CMD = 0x9f,
+
+	/* RF-KILL commands and notifications */
+	CARD_STATE_CMD = 0xa0,
+	CARD_STATE_NOTIFICATION = 0xa1,
+
+	MISSED_BEACONS_NOTIFICATION = 0xa2,
+
+	/* Power - new power table command */
+	MAC_PM_POWER_TABLE = 0xa9,
+
+	MFUART_LOAD_NOTIFICATION = 0xb1,
+
+	REPLY_RX_PHY_CMD = 0xc0,
+	REPLY_RX_MPDU_CMD = 0xc1,
+	FRAME_RELEASE = 0xc3,
+	BA_NOTIF = 0xc5,
+
+	/* Location Aware Regulatory */
+	MCC_UPDATE_CMD = 0xc8,
+	MCC_CHUB_UPDATE_CMD = 0xc9,
+
+	MARKER_CMD = 0xcb,
+
+	/* BT Coex */
+	BT_COEX_PRIO_TABLE = 0xcc,
+	BT_COEX_PROT_ENV = 0xcd,
+	BT_PROFILE_NOTIFICATION = 0xce,
+	BT_CONFIG = 0x9b,
+	BT_COEX_UPDATE_SW_BOOST = 0x5a,
+	BT_COEX_UPDATE_CORUN_LUT = 0x5b,
+	BT_COEX_UPDATE_REDUCED_TXP = 0x5c,
+	BT_COEX_CI = 0x5d,
+
+	REPLY_SF_CFG_CMD = 0xd1,
+	REPLY_BEACON_FILTERING_CMD = 0xd2,
+
+	/* DTS measurements */
+	CMD_DTS_MEASUREMENT_TRIGGER = 0xdc,
+	DTS_MEASUREMENT_NOTIFICATION = 0xdd,
+
+	REPLY_DEBUG_CMD = 0xf0,
+	LDBG_CONFIG_CMD = 0xf6,
+	DEBUG_LOG_MSG = 0xf7,
+
+	BCAST_FILTER_CMD = 0xcf,
+	MCAST_FILTER_CMD = 0xd0,
+
+	/* D3 commands/notifications */
+	D3_CONFIG_CMD = 0xd3,
+	PROT_OFFLOAD_CONFIG_CMD = 0xd4,
+	OFFLOADS_QUERY_CMD = 0xd5,
+	REMOTE_WAKE_CONFIG_CMD = 0xd6,
+	D0I3_END_CMD = 0xed,
+
+	/* for WoWLAN in particular */
+	WOWLAN_PATTERNS = 0xe0,
+	WOWLAN_CONFIGURATION = 0xe1,
+	WOWLAN_TSC_RSC_PARAM = 0xe2,
+	WOWLAN_TKIP_PARAM = 0xe3,
+	WOWLAN_KEK_KCK_MATERIAL = 0xe4,
+	WOWLAN_GET_STATUSES = 0xe5,
+	WOWLAN_TX_POWER_PER_DB = 0xe6,
+
+	/* and for NetDetect */
+	SCAN_OFFLOAD_PROFILES_QUERY_CMD = 0x56,
+	SCAN_OFFLOAD_HOTSPOTS_CONFIG_CMD = 0x58,
+	SCAN_OFFLOAD_HOTSPOTS_QUERY_CMD = 0x59,
+
+	REPLY_MAX = 0xff,
+};
+
+/* Please keep this enum *SORTED* by hex value.
+ * Needed for binary search, otherwise a warning will be triggered.
+ */
+enum iwl_phy_ops_subcmd_ids {
+	CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
+	DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
+};
+
+/* command groups */
+enum {
+	LEGACY_GROUP = 0x0,
+	LONG_GROUP = 0x1,
+	PHY_OPS_GROUP = 0x4,
+};
+
+/**
+ * struct iwl_cmd_response - generic response struct for most commands
+ * @status: status of the command asked, changes for each one
+ */
+struct iwl_cmd_response {
+	__le32 status;
+};
+
+/*
+ * struct iwl_tx_ant_cfg_cmd
+ * @valid: valid antenna configuration
+ */
+struct iwl_tx_ant_cfg_cmd {
+	__le32 valid;
+} __packed;
+
+/*
+ * Calibration control struct.
+ * Sent as part of the phy configuration command.
+ * @flow_trigger: bitmap for which calibrations to perform according to
+ *		flow triggers.
+ * @event_trigger: bitmap for which calibrations to perform according to
+ *		event triggers.
+ */
+struct iwl_calib_ctrl {
+	__le32 flow_trigger;
+	__le32 event_trigger;
+} __packed;
+
+/* This enum defines the bitmap of various calibrations to enable in both
+ * init ucode and runtime ucode through CALIBRATION_CFG_CMD.
+ */
+enum iwl_calib_cfg {
+	IWL_CALIB_CFG_XTAL_IDX			= BIT(0),
+	IWL_CALIB_CFG_TEMPERATURE_IDX		= BIT(1),
+	IWL_CALIB_CFG_VOLTAGE_READ_IDX		= BIT(2),
+	IWL_CALIB_CFG_PAPD_IDX			= BIT(3),
+	IWL_CALIB_CFG_TX_PWR_IDX		= BIT(4),
+	IWL_CALIB_CFG_DC_IDX			= BIT(5),
+	IWL_CALIB_CFG_BB_FILTER_IDX		= BIT(6),
+	IWL_CALIB_CFG_LO_LEAKAGE_IDX		= BIT(7),
+	IWL_CALIB_CFG_TX_IQ_IDX			= BIT(8),
+	IWL_CALIB_CFG_TX_IQ_SKEW_IDX		= BIT(9),
+	IWL_CALIB_CFG_RX_IQ_IDX			= BIT(10),
+	IWL_CALIB_CFG_RX_IQ_SKEW_IDX		= BIT(11),
+	IWL_CALIB_CFG_SENSITIVITY_IDX		= BIT(12),
+	IWL_CALIB_CFG_CHAIN_NOISE_IDX		= BIT(13),
+	IWL_CALIB_CFG_DISCONNECTED_ANT_IDX	= BIT(14),
+	IWL_CALIB_CFG_ANT_COUPLING_IDX		= BIT(15),
+	IWL_CALIB_CFG_DAC_IDX			= BIT(16),
+	IWL_CALIB_CFG_ABS_IDX			= BIT(17),
+	IWL_CALIB_CFG_AGC_IDX			= BIT(18),
+};
+
+/*
+ * Phy configuration command.
+ */
+struct iwl_phy_cfg_cmd {
+	__le32	phy_cfg;
+	struct iwl_calib_ctrl calib_control;
+} __packed;
+
+#define PHY_CFG_RADIO_TYPE	(BIT(0) | BIT(1))
+#define PHY_CFG_RADIO_STEP	(BIT(2) | BIT(3))
+#define PHY_CFG_RADIO_DASH	(BIT(4) | BIT(5))
+#define PHY_CFG_PRODUCT_NUMBER	(BIT(6) | BIT(7))
+#define PHY_CFG_TX_CHAIN_A	BIT(8)
+#define PHY_CFG_TX_CHAIN_B	BIT(9)
+#define PHY_CFG_TX_CHAIN_C	BIT(10)
+#define PHY_CFG_RX_CHAIN_A	BIT(12)
+#define PHY_CFG_RX_CHAIN_B	BIT(13)
+#define PHY_CFG_RX_CHAIN_C	BIT(14)
+
+
+/* Target of the NVM_ACCESS_CMD */
+enum {
+	NVM_ACCESS_TARGET_CACHE = 0,
+	NVM_ACCESS_TARGET_OTP = 1,
+	NVM_ACCESS_TARGET_EEPROM = 2,
+};
+
+/* Section types for NVM_ACCESS_CMD */
+enum {
+	NVM_SECTION_TYPE_SW = 1,
+	NVM_SECTION_TYPE_REGULATORY = 3,
+	NVM_SECTION_TYPE_CALIBRATION = 4,
+	NVM_SECTION_TYPE_PRODUCTION = 5,
+	NVM_SECTION_TYPE_MAC_OVERRIDE = 11,
+	NVM_SECTION_TYPE_PHY_SKU = 12,
+	NVM_MAX_NUM_SECTIONS = 13,
+};
+
+/**
+ * struct iwl_nvm_access_cmd_ver2 - Request the device to send an NVM section
+ * @op_code: 0 - read, 1 - write
+ * @target: NVM_ACCESS_TARGET_*
+ * @type: NVM_SECTION_TYPE_*
+ * @offset: offset in bytes into the section
+ * @length: in bytes, to read/write
+ * @data: if write operation, the data to write. On read its empty
+ */
+struct iwl_nvm_access_cmd {
+	u8 op_code;
+	u8 target;
+	__le16 type;
+	__le16 offset;
+	__le16 length;
+	u8 data[];
+} __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */
+
+#define NUM_OF_FW_PAGING_BLOCKS	33 /* 32 for data and 1 block for CSS */
+
+/*
+ * struct iwl_fw_paging_cmd - paging layout
+ *
+ * (FW_PAGING_BLOCK_CMD = 0x4f)
+ *
+ * Send to FW the paging layout in the driver.
+ *
+ * @flags: various flags for the command
+ * @block_size: the block size in powers of 2
+ * @block_num: number of blocks specified in the command.
+ * @device_phy_addr: virtual addresses from device side
+*/
+struct iwl_fw_paging_cmd {
+	__le32 flags;
+	__le32 block_size;
+	__le32 block_num;
+	__le32 device_phy_addr[NUM_OF_FW_PAGING_BLOCKS];
+} __packed; /* FW_PAGING_BLOCK_CMD_API_S_VER_1 */
+
+/*
+ * Fw items ID's
+ *
+ * @IWL_FW_ITEM_ID_PAGING: Address of the pages that the FW will upload
+ *	download
+ */
+enum iwl_fw_item_id {
+	IWL_FW_ITEM_ID_PAGING = 3,
+};
+
+/*
+ * struct iwl_fw_get_item_cmd - get an item from the fw
+ */
+struct iwl_fw_get_item_cmd {
+	__le32 item_id;
+} __packed; /* FW_GET_ITEM_CMD_API_S_VER_1 */
+
+#define CONT_REC_COMMAND_SIZE	80
+#define ENABLE_CONT_RECORDING	0x15
+#define DISABLE_CONT_RECORDING	0x16
+
+/*
+ * struct iwl_continuous_record_mode - recording mode
+ */
+struct iwl_continuous_record_mode {
+	__le16 enable_recording;
+} __packed;
+
+/*
+ * struct iwl_continuous_record_cmd - enable/disable continuous recording
+ */
+struct iwl_continuous_record_cmd {
+	struct iwl_continuous_record_mode record_mode;
+	u8 pad[CONT_REC_COMMAND_SIZE -
+		sizeof(struct iwl_continuous_record_mode)];
+} __packed;
+
+struct iwl_fw_get_item_resp {
+	__le32 item_id;
+	__le32 item_byte_cnt;
+	__le32 item_val;
+} __packed; /* FW_GET_ITEM_RSP_S_VER_1 */
+
+/**
+ * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD
+ * @offset: offset in bytes into the section
+ * @length: in bytes, either how much was written or read
+ * @type: NVM_SECTION_TYPE_*
+ * @status: 0 for success, fail otherwise
+ * @data: if read operation, the data returned. Empty on write.
+ */
+struct iwl_nvm_access_resp {
+	__le16 offset;
+	__le16 length;
+	__le16 type;
+	__le16 status;
+	u8 data[];
+} __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */
+
+/* MVM_ALIVE 0x1 */
+
+/* alive response is_valid values */
+#define ALIVE_RESP_UCODE_OK	BIT(0)
+#define ALIVE_RESP_RFKILL	BIT(1)
+
+/* alive response ver_type values */
+enum {
+	FW_TYPE_HW = 0,
+	FW_TYPE_PROT = 1,
+	FW_TYPE_AP = 2,
+	FW_TYPE_WOWLAN = 3,
+	FW_TYPE_TIMING = 4,
+	FW_TYPE_WIPAN = 5
+};
+
+/* alive response ver_subtype values */
+enum {
+	FW_SUBTYPE_FULL_FEATURE = 0,
+	FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */
+	FW_SUBTYPE_REDUCED = 2,
+	FW_SUBTYPE_ALIVE_ONLY = 3,
+	FW_SUBTYPE_WOWLAN = 4,
+	FW_SUBTYPE_AP_SUBTYPE = 5,
+	FW_SUBTYPE_WIPAN = 6,
+	FW_SUBTYPE_INITIALIZE = 9
+};
+
+#define IWL_ALIVE_STATUS_ERR 0xDEAD
+#define IWL_ALIVE_STATUS_OK 0xCAFE
+
+#define IWL_ALIVE_FLG_RFKILL	BIT(0)
+
+struct mvm_alive_resp_ver1 {
+	__le16 status;
+	__le16 flags;
+	u8 ucode_minor;
+	u8 ucode_major;
+	__le16 id;
+	u8 api_minor;
+	u8 api_major;
+	u8 ver_subtype;
+	u8 ver_type;
+	u8 mac;
+	u8 opt;
+	__le16 reserved2;
+	__le32 timestamp;
+	__le32 error_event_table_ptr;	/* SRAM address for error log */
+	__le32 log_event_table_ptr;	/* SRAM address for event log */
+	__le32 cpu_register_ptr;
+	__le32 dbgm_config_ptr;
+	__le32 alive_counter_ptr;
+	__le32 scd_base_ptr;		/* SRAM address for SCD */
+} __packed; /* ALIVE_RES_API_S_VER_1 */
+
+struct mvm_alive_resp_ver2 {
+	__le16 status;
+	__le16 flags;
+	u8 ucode_minor;
+	u8 ucode_major;
+	__le16 id;
+	u8 api_minor;
+	u8 api_major;
+	u8 ver_subtype;
+	u8 ver_type;
+	u8 mac;
+	u8 opt;
+	__le16 reserved2;
+	__le32 timestamp;
+	__le32 error_event_table_ptr;	/* SRAM address for error log */
+	__le32 log_event_table_ptr;	/* SRAM address for LMAC event log */
+	__le32 cpu_register_ptr;
+	__le32 dbgm_config_ptr;
+	__le32 alive_counter_ptr;
+	__le32 scd_base_ptr;		/* SRAM address for SCD */
+	__le32 st_fwrd_addr;		/* pointer to Store and forward */
+	__le32 st_fwrd_size;
+	u8 umac_minor;			/* UMAC version: minor */
+	u8 umac_major;			/* UMAC version: major */
+	__le16 umac_id;			/* UMAC version: id */
+	__le32 error_info_addr;		/* SRAM address for UMAC error log */
+	__le32 dbg_print_buff_addr;
+} __packed; /* ALIVE_RES_API_S_VER_2 */
+
+struct mvm_alive_resp {
+	__le16 status;
+	__le16 flags;
+	__le32 ucode_minor;
+	__le32 ucode_major;
+	u8 ver_subtype;
+	u8 ver_type;
+	u8 mac;
+	u8 opt;
+	__le32 timestamp;
+	__le32 error_event_table_ptr;	/* SRAM address for error log */
+	__le32 log_event_table_ptr;	/* SRAM address for LMAC event log */
+	__le32 cpu_register_ptr;
+	__le32 dbgm_config_ptr;
+	__le32 alive_counter_ptr;
+	__le32 scd_base_ptr;		/* SRAM address for SCD */
+	__le32 st_fwrd_addr;		/* pointer to Store and forward */
+	__le32 st_fwrd_size;
+	__le32 umac_minor;		/* UMAC version: minor */
+	__le32 umac_major;		/* UMAC version: major */
+	__le32 error_info_addr;		/* SRAM address for UMAC error log */
+	__le32 dbg_print_buff_addr;
+} __packed; /* ALIVE_RES_API_S_VER_3 */
+
+/* Error response/notification */
+enum {
+	FW_ERR_UNKNOWN_CMD = 0x0,
+	FW_ERR_INVALID_CMD_PARAM = 0x1,
+	FW_ERR_SERVICE = 0x2,
+	FW_ERR_ARC_MEMORY = 0x3,
+	FW_ERR_ARC_CODE = 0x4,
+	FW_ERR_WATCH_DOG = 0x5,
+	FW_ERR_WEP_GRP_KEY_INDX = 0x10,
+	FW_ERR_WEP_KEY_SIZE = 0x11,
+	FW_ERR_OBSOLETE_FUNC = 0x12,
+	FW_ERR_UNEXPECTED = 0xFE,
+	FW_ERR_FATAL = 0xFF
+};
+
+/**
+ * struct iwl_error_resp - FW error indication
+ * ( REPLY_ERROR = 0x2 )
+ * @error_type: one of FW_ERR_*
+ * @cmd_id: the command ID for which the error occured
+ * @bad_cmd_seq_num: sequence number of the erroneous command
+ * @error_service: which service created the error, applicable only if
+ *	error_type = 2, otherwise 0
+ * @timestamp: TSF in usecs.
+ */
+struct iwl_error_resp {
+	__le32 error_type;
+	u8 cmd_id;
+	u8 reserved1;
+	__le16 bad_cmd_seq_num;
+	__le32 error_service;
+	__le64 timestamp;
+} __packed;
+
+
+/* Common PHY, MAC and Bindings definitions */
+
+#define MAX_MACS_IN_BINDING	(3)
+#define MAX_BINDINGS		(4)
+#define AUX_BINDING_INDEX	(3)
+#define MAX_PHYS		(4)
+
+/* Used to extract ID and color from the context dword */
+#define FW_CTXT_ID_POS	  (0)
+#define FW_CTXT_ID_MSK	  (0xff << FW_CTXT_ID_POS)
+#define FW_CTXT_COLOR_POS (8)
+#define FW_CTXT_COLOR_MSK (0xff << FW_CTXT_COLOR_POS)
+#define FW_CTXT_INVALID	  (0xffffffff)
+
+#define FW_CMD_ID_AND_COLOR(_id, _color) ((_id << FW_CTXT_ID_POS) |\
+					  (_color << FW_CTXT_COLOR_POS))
+
+/* Possible actions on PHYs, MACs and Bindings */
+enum {
+	FW_CTXT_ACTION_STUB = 0,
+	FW_CTXT_ACTION_ADD,
+	FW_CTXT_ACTION_MODIFY,
+	FW_CTXT_ACTION_REMOVE,
+	FW_CTXT_ACTION_NUM
+}; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */
+
+/* Time Events */
+
+/* Time Event types, according to MAC type */
+enum iwl_time_event_type {
+	/* BSS Station Events */
+	TE_BSS_STA_AGGRESSIVE_ASSOC,
+	TE_BSS_STA_ASSOC,
+	TE_BSS_EAP_DHCP_PROT,
+	TE_BSS_QUIET_PERIOD,
+
+	/* P2P Device Events */
+	TE_P2P_DEVICE_DISCOVERABLE,
+	TE_P2P_DEVICE_LISTEN,
+	TE_P2P_DEVICE_ACTION_SCAN,
+	TE_P2P_DEVICE_FULL_SCAN,
+
+	/* P2P Client Events */
+	TE_P2P_CLIENT_AGGRESSIVE_ASSOC,
+	TE_P2P_CLIENT_ASSOC,
+	TE_P2P_CLIENT_QUIET_PERIOD,
+
+	/* P2P GO Events */
+	TE_P2P_GO_ASSOC_PROT,
+	TE_P2P_GO_REPETITIVE_NOA,
+	TE_P2P_GO_CT_WINDOW,
+
+	/* WiDi Sync Events */
+	TE_WIDI_TX_SYNC,
+
+	/* Channel Switch NoA */
+	TE_CHANNEL_SWITCH_PERIOD,
+
+	TE_MAX
+}; /* MAC_EVENT_TYPE_API_E_VER_1 */
+
+
+
+/* Time event - defines for command API v1 */
+
+/*
+ * @TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed.
+ * @TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only
+ *	the first fragment is scheduled.
+ * @TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only
+ *	the first 2 fragments are scheduled.
+ * @TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
+ *	number of fragments are valid.
+ *
+ * Other than the constant defined above, specifying a fragmentation value 'x'
+ * means that the event can be fragmented but only the first 'x' will be
+ * scheduled.
+ */
+enum {
+	TE_V1_FRAG_NONE = 0,
+	TE_V1_FRAG_SINGLE = 1,
+	TE_V1_FRAG_DUAL = 2,
+	TE_V1_FRAG_ENDLESS = 0xffffffff
+};
+
+/* If a Time Event can be fragmented, this is the max number of fragments */
+#define TE_V1_FRAG_MAX_MSK	0x0fffffff
+/* Repeat the time event endlessly (until removed) */
+#define TE_V1_REPEAT_ENDLESS	0xffffffff
+/* If a Time Event has bounded repetitions, this is the maximal value */
+#define TE_V1_REPEAT_MAX_MSK_V1	0x0fffffff
+
+/* Time Event dependencies: none, on another TE, or in a specific time */
+enum {
+	TE_V1_INDEPENDENT		= 0,
+	TE_V1_DEP_OTHER			= BIT(0),
+	TE_V1_DEP_TSF			= BIT(1),
+	TE_V1_EVENT_SOCIOPATHIC		= BIT(2),
+}; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */
+
+/*
+ * @TE_V1_NOTIF_NONE: no notifications
+ * @TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start
+ * @TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end
+ * @TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use
+ * @TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use.
+ * @TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start
+ * @TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end
+ * @TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use.
+ * @TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use.
+ *
+ * Supported Time event notifications configuration.
+ * A notification (both event and fragment) includes a status indicating weather
+ * the FW was able to schedule the event or not. For fragment start/end
+ * notification the status is always success. There is no start/end fragment
+ * notification for monolithic events.
+ */
+enum {
+	TE_V1_NOTIF_NONE = 0,
+	TE_V1_NOTIF_HOST_EVENT_START = BIT(0),
+	TE_V1_NOTIF_HOST_EVENT_END = BIT(1),
+	TE_V1_NOTIF_INTERNAL_EVENT_START = BIT(2),
+	TE_V1_NOTIF_INTERNAL_EVENT_END = BIT(3),
+	TE_V1_NOTIF_HOST_FRAG_START = BIT(4),
+	TE_V1_NOTIF_HOST_FRAG_END = BIT(5),
+	TE_V1_NOTIF_INTERNAL_FRAG_START = BIT(6),
+	TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7),
+}; /* MAC_EVENT_ACTION_API_E_VER_2 */
+
+/* Time event - defines for command API */
+
+/*
+ * @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed.
+ * @TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only
+ *  the first fragment is scheduled.
+ * @TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only
+ *  the first 2 fragments are scheduled.
+ * @TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
+ *  number of fragments are valid.
+ *
+ * Other than the constant defined above, specifying a fragmentation value 'x'
+ * means that the event can be fragmented but only the first 'x' will be
+ * scheduled.
+ */
+enum {
+	TE_V2_FRAG_NONE = 0,
+	TE_V2_FRAG_SINGLE = 1,
+	TE_V2_FRAG_DUAL = 2,
+	TE_V2_FRAG_MAX = 0xfe,
+	TE_V2_FRAG_ENDLESS = 0xff
+};
+
+/* Repeat the time event endlessly (until removed) */
+#define TE_V2_REPEAT_ENDLESS	0xff
+/* If a Time Event has bounded repetitions, this is the maximal value */
+#define TE_V2_REPEAT_MAX	0xfe
+
+#define TE_V2_PLACEMENT_POS	12
+#define TE_V2_ABSENCE_POS	15
+
+/* Time event policy values
+ * A notification (both event and fragment) includes a status indicating weather
+ * the FW was able to schedule the event or not. For fragment start/end
+ * notification the status is always success. There is no start/end fragment
+ * notification for monolithic events.
+ *
+ * @TE_V2_DEFAULT_POLICY: independent, social, present, unoticable
+ * @TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start
+ * @TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end
+ * @TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use
+ * @TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use.
+ * @TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start
+ * @TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end
+ * @TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use.
+ * @TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use.
+ * @TE_V2_DEP_OTHER: depends on another time event
+ * @TE_V2_DEP_TSF: depends on a specific time
+ * @TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC
+ * @TE_V2_ABSENCE: are we present or absent during the Time Event.
+ */
+enum {
+	TE_V2_DEFAULT_POLICY = 0x0,
+
+	/* notifications (event start/stop, fragment start/stop) */
+	TE_V2_NOTIF_HOST_EVENT_START = BIT(0),
+	TE_V2_NOTIF_HOST_EVENT_END = BIT(1),
+	TE_V2_NOTIF_INTERNAL_EVENT_START = BIT(2),
+	TE_V2_NOTIF_INTERNAL_EVENT_END = BIT(3),
+
+	TE_V2_NOTIF_HOST_FRAG_START = BIT(4),
+	TE_V2_NOTIF_HOST_FRAG_END = BIT(5),
+	TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6),
+	TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7),
+	T2_V2_START_IMMEDIATELY = BIT(11),
+
+	TE_V2_NOTIF_MSK = 0xff,
+
+	/* placement characteristics */
+	TE_V2_DEP_OTHER = BIT(TE_V2_PLACEMENT_POS),
+	TE_V2_DEP_TSF = BIT(TE_V2_PLACEMENT_POS + 1),
+	TE_V2_EVENT_SOCIOPATHIC = BIT(TE_V2_PLACEMENT_POS + 2),
+
+	/* are we present or absent during the Time Event. */
+	TE_V2_ABSENCE = BIT(TE_V2_ABSENCE_POS),
+};
+
+/**
+ * struct iwl_time_event_cmd_api - configuring Time Events
+ * with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also
+ * with version 1. determined by IWL_UCODE_TLV_FLAGS)
+ * ( TIME_EVENT_CMD = 0x29 )
+ * @id_and_color: ID and color of the relevant MAC
+ * @action: action to perform, one of FW_CTXT_ACTION_*
+ * @id: this field has two meanings, depending on the action:
+ *	If the action is ADD, then it means the type of event to add.
+ *	For all other actions it is the unique event ID assigned when the
+ *	event was added by the FW.
+ * @apply_time: When to start the Time Event (in GP2)
+ * @max_delay: maximum delay to event's start (apply time), in TU
+ * @depends_on: the unique ID of the event we depend on (if any)
+ * @interval: interval between repetitions, in TU
+ * @duration: duration of event in TU
+ * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS
+ * @max_frags: maximal number of fragments the Time Event can be divided to
+ * @policy: defines whether uCode shall notify the host or other uCode modules
+ *	on event and/or fragment start and/or end
+ *	using one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF
+ *	TE_EVENT_SOCIOPATHIC
+ *	using TE_ABSENCE and using TE_NOTIF_*
+ */
+struct iwl_time_event_cmd {
+	/* COMMON_INDEX_HDR_API_S_VER_1 */
+	__le32 id_and_color;
+	__le32 action;
+	__le32 id;
+	/* MAC_TIME_EVENT_DATA_API_S_VER_2 */
+	__le32 apply_time;
+	__le32 max_delay;
+	__le32 depends_on;
+	__le32 interval;
+	__le32 duration;
+	u8 repeat;
+	u8 max_frags;
+	__le16 policy;
+} __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_2 */
+
+/**
+ * struct iwl_time_event_resp - response structure to iwl_time_event_cmd
+ * @status: bit 0 indicates success, all others specify errors
+ * @id: the Time Event type
+ * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE
+ * @id_and_color: ID and color of the relevant MAC
+ */
+struct iwl_time_event_resp {
+	__le32 status;
+	__le32 id;
+	__le32 unique_id;
+	__le32 id_and_color;
+} __packed; /* MAC_TIME_EVENT_RSP_API_S_VER_1 */
+
+/**
+ * struct iwl_time_event_notif - notifications of time event start/stop
+ * ( TIME_EVENT_NOTIFICATION = 0x2a )
+ * @timestamp: action timestamp in GP2
+ * @session_id: session's unique id
+ * @unique_id: unique id of the Time Event itself
+ * @id_and_color: ID and color of the relevant MAC
+ * @action: one of TE_NOTIF_START or TE_NOTIF_END
+ * @status: true if scheduled, false otherwise (not executed)
+ */
+struct iwl_time_event_notif {
+	__le32 timestamp;
+	__le32 session_id;
+	__le32 unique_id;
+	__le32 id_and_color;
+	__le32 action;
+	__le32 status;
+} __packed; /* MAC_TIME_EVENT_NTFY_API_S_VER_1 */
+
+
+/* Bindings and Time Quota */
+
+/**
+ * struct iwl_binding_cmd - configuring bindings
+ * ( BINDING_CONTEXT_CMD = 0x2b )
+ * @id_and_color: ID and color of the relevant Binding
+ * @action: action to perform, one of FW_CTXT_ACTION_*
+ * @macs: array of MAC id and colors which belong to the binding
+ * @phy: PHY id and color which belongs to the binding
+ */
+struct iwl_binding_cmd {
+	/* COMMON_INDEX_HDR_API_S_VER_1 */
+	__le32 id_and_color;
+	__le32 action;
+	/* BINDING_DATA_API_S_VER_1 */
+	__le32 macs[MAX_MACS_IN_BINDING];
+	__le32 phy;
+} __packed; /* BINDING_CMD_API_S_VER_1 */
+
+/* The maximal number of fragments in the FW's schedule session */
+#define IWL_MVM_MAX_QUOTA 128
+
+/**
+ * struct iwl_time_quota_data - configuration of time quota per binding
+ * @id_and_color: ID and color of the relevant Binding
+ * @quota: absolute time quota in TU. The scheduler will try to divide the
+ *	remainig quota (after Time Events) according to this quota.
+ * @max_duration: max uninterrupted context duration in TU
+ */
+struct iwl_time_quota_data {
+	__le32 id_and_color;
+	__le32 quota;
+	__le32 max_duration;
+} __packed; /* TIME_QUOTA_DATA_API_S_VER_1 */
+
+/**
+ * struct iwl_time_quota_cmd - configuration of time quota between bindings
+ * ( TIME_QUOTA_CMD = 0x2c )
+ * @quotas: allocations per binding
+ */
+struct iwl_time_quota_cmd {
+	struct iwl_time_quota_data quotas[MAX_BINDINGS];
+} __packed; /* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */
+
+
+/* PHY context */
+
+/* Supported bands */
+#define PHY_BAND_5  (0)
+#define PHY_BAND_24 (1)
+
+/* Supported channel width, vary if there is VHT support */
+#define PHY_VHT_CHANNEL_MODE20	(0x0)
+#define PHY_VHT_CHANNEL_MODE40	(0x1)
+#define PHY_VHT_CHANNEL_MODE80	(0x2)
+#define PHY_VHT_CHANNEL_MODE160	(0x3)
+
+/*
+ * Control channel position:
+ * For legacy set bit means upper channel, otherwise lower.
+ * For VHT - bit-2 marks if the control is lower/upper relative to center-freq
+ *   bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0.
+ *                                   center_freq
+ *                                        |
+ * 40Mhz                          |_______|_______|
+ * 80Mhz                  |_______|_______|_______|_______|
+ * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______|
+ * code      011     010     001     000  |  100     101     110    111
+ */
+#define PHY_VHT_CTRL_POS_1_BELOW  (0x0)
+#define PHY_VHT_CTRL_POS_2_BELOW  (0x1)
+#define PHY_VHT_CTRL_POS_3_BELOW  (0x2)
+#define PHY_VHT_CTRL_POS_4_BELOW  (0x3)
+#define PHY_VHT_CTRL_POS_1_ABOVE  (0x4)
+#define PHY_VHT_CTRL_POS_2_ABOVE  (0x5)
+#define PHY_VHT_CTRL_POS_3_ABOVE  (0x6)
+#define PHY_VHT_CTRL_POS_4_ABOVE  (0x7)
+
+/*
+ * @band: PHY_BAND_*
+ * @channel: channel number
+ * @width: PHY_[VHT|LEGACY]_CHANNEL_*
+ * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
+ */
+struct iwl_fw_channel_info {
+	u8 band;
+	u8 channel;
+	u8 width;
+	u8 ctrl_pos;
+} __packed;
+
+#define PHY_RX_CHAIN_DRIVER_FORCE_POS	(0)
+#define PHY_RX_CHAIN_DRIVER_FORCE_MSK \
+	(0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS)
+#define PHY_RX_CHAIN_VALID_POS		(1)
+#define PHY_RX_CHAIN_VALID_MSK \
+	(0x7 << PHY_RX_CHAIN_VALID_POS)
+#define PHY_RX_CHAIN_FORCE_SEL_POS	(4)
+#define PHY_RX_CHAIN_FORCE_SEL_MSK \
+	(0x7 << PHY_RX_CHAIN_FORCE_SEL_POS)
+#define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS	(7)
+#define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \
+	(0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS)
+#define PHY_RX_CHAIN_CNT_POS		(10)
+#define PHY_RX_CHAIN_CNT_MSK \
+	(0x3 << PHY_RX_CHAIN_CNT_POS)
+#define PHY_RX_CHAIN_MIMO_CNT_POS	(12)
+#define PHY_RX_CHAIN_MIMO_CNT_MSK \
+	(0x3 << PHY_RX_CHAIN_MIMO_CNT_POS)
+#define PHY_RX_CHAIN_MIMO_FORCE_POS	(14)
+#define PHY_RX_CHAIN_MIMO_FORCE_MSK \
+	(0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS)
+
+/* TODO: fix the value, make it depend on firmware at runtime? */
+#define NUM_PHY_CTX	3
+
+/* TODO: complete missing documentation */
+/**
+ * struct iwl_phy_context_cmd - config of the PHY context
+ * ( PHY_CONTEXT_CMD = 0x8 )
+ * @id_and_color: ID and color of the relevant Binding
+ * @action: action to perform, one of FW_CTXT_ACTION_*
+ * @apply_time: 0 means immediate apply and context switch.
+ *	other value means apply new params after X usecs
+ * @tx_param_color: ???
+ * @channel_info:
+ * @txchain_info: ???
+ * @rxchain_info: ???
+ * @acquisition_data: ???
+ * @dsp_cfg_flags: set to 0
+ */
+struct iwl_phy_context_cmd {
+	/* COMMON_INDEX_HDR_API_S_VER_1 */
+	__le32 id_and_color;
+	__le32 action;
+	/* PHY_CONTEXT_DATA_API_S_VER_1 */
+	__le32 apply_time;
+	__le32 tx_param_color;
+	struct iwl_fw_channel_info ci;
+	__le32 txchain_info;
+	__le32 rxchain_info;
+	__le32 acquisition_data;
+	__le32 dsp_cfg_flags;
+} __packed; /* PHY_CONTEXT_CMD_API_VER_1 */
+
+/*
+ * Aux ROC command
+ *
+ * Command requests the firmware to create a time event for a certain duration
+ * and remain on the given channel. This is done by using the Aux framework in
+ * the FW.
+ * The command was first used for Hot Spot issues - but can be used regardless
+ * to Hot Spot.
+ *
+ * ( HOT_SPOT_CMD 0x53 )
+ *
+ * @id_and_color: ID and color of the MAC
+ * @action: action to perform, one of FW_CTXT_ACTION_*
+ * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the
+ *	event_unique_id should be the id of the time event assigned by ucode.
+ *	Otherwise ignore the event_unique_id.
+ * @sta_id_and_color: station id and color, resumed during "Remain On Channel"
+ *	activity.
+ * @channel_info: channel info
+ * @node_addr: Our MAC Address
+ * @reserved: reserved for alignment
+ * @apply_time: GP2 value to start (should always be the current GP2 value)
+ * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max
+ *	time by which start of the event is allowed to be postponed.
+ * @duration: event duration in TU To calculate event duration:
+ *	timeEventDuration = min(duration, remainingQuota)
+ */
+struct iwl_hs20_roc_req {
+	/* COMMON_INDEX_HDR_API_S_VER_1 hdr */
+	__le32 id_and_color;
+	__le32 action;
+	__le32 event_unique_id;
+	__le32 sta_id_and_color;
+	struct iwl_fw_channel_info channel_info;
+	u8 node_addr[ETH_ALEN];
+	__le16 reserved;
+	__le32 apply_time;
+	__le32 apply_time_max_delay;
+	__le32 duration;
+} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */
+
+/*
+ * values for AUX ROC result values
+ */
+enum iwl_mvm_hot_spot {
+	HOT_SPOT_RSP_STATUS_OK,
+	HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS,
+	HOT_SPOT_MAX_NUM_OF_SESSIONS,
+};
+
+/*
+ * Aux ROC command response
+ *
+ * In response to iwl_hs20_roc_req the FW sends this command to notify the
+ * driver the uid of the timevent.
+ *
+ * ( HOT_SPOT_CMD 0x53 )
+ *
+ * @event_unique_id: Unique ID of time event assigned by ucode
+ * @status: Return status 0 is success, all the rest used for specific errors
+ */
+struct iwl_hs20_roc_res {
+	__le32 event_unique_id;
+	__le32 status;
+} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */
+
+/**
+ * struct iwl_radio_version_notif - information on the radio version
+ * ( RADIO_VERSION_NOTIFICATION = 0x68 )
+ * @radio_flavor:
+ * @radio_step:
+ * @radio_dash:
+ */
+struct iwl_radio_version_notif {
+	__le32 radio_flavor;
+	__le32 radio_step;
+	__le32 radio_dash;
+} __packed; /* RADIO_VERSION_NOTOFICATION_S_VER_1 */
+
+enum iwl_card_state_flags {
+	CARD_ENABLED		= 0x00,
+	HW_CARD_DISABLED	= 0x01,
+	SW_CARD_DISABLED	= 0x02,
+	CT_KILL_CARD_DISABLED	= 0x04,
+	HALT_CARD_DISABLED	= 0x08,
+	CARD_DISABLED_MSK	= 0x0f,
+	CARD_IS_RX_ON		= 0x10,
+};
+
+/**
+ * struct iwl_radio_version_notif - information on the radio version
+ * ( CARD_STATE_NOTIFICATION = 0xa1 )
+ * @flags: %iwl_card_state_flags
+ */
+struct iwl_card_state_notif {
+	__le32 flags;
+} __packed; /* CARD_STATE_NTFY_API_S_VER_1 */
+
+/**
+ * struct iwl_missed_beacons_notif - information on missed beacons
+ * ( MISSED_BEACONS_NOTIFICATION = 0xa2 )
+ * @mac_id: interface ID
+ * @consec_missed_beacons_since_last_rx: number of consecutive missed
+ *	beacons since last RX.
+ * @consec_missed_beacons: number of consecutive missed beacons
+ * @num_expected_beacons:
+ * @num_recvd_beacons:
+ */
+struct iwl_missed_beacons_notif {
+	__le32 mac_id;
+	__le32 consec_missed_beacons_since_last_rx;
+	__le32 consec_missed_beacons;
+	__le32 num_expected_beacons;
+	__le32 num_recvd_beacons;
+} __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */
+
+/**
+ * struct iwl_mfuart_load_notif - mfuart image version & status
+ * ( MFUART_LOAD_NOTIFICATION = 0xb1 )
+ * @installed_ver: installed image version
+ * @external_ver: external image version
+ * @status: MFUART loading status
+ * @duration: MFUART loading time
+*/
+struct iwl_mfuart_load_notif {
+	__le32 installed_ver;
+	__le32 external_ver;
+	__le32 status;
+	__le32 duration;
+} __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/
+
+/**
+ * struct iwl_set_calib_default_cmd - set default value for calibration.
+ * ( SET_CALIB_DEFAULT_CMD = 0x8e )
+ * @calib_index: the calibration to set value for
+ * @length: of data
+ * @data: the value to set for the calibration result
+ */
+struct iwl_set_calib_default_cmd {
+	__le16 calib_index;
+	__le16 length;
+	u8 data[0];
+} __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */
+
+#define MAX_PORT_ID_NUM	2
+#define MAX_MCAST_FILTERING_ADDRESSES 256
+
+/**
+ * struct iwl_mcast_filter_cmd - configure multicast filter.
+ * @filter_own: Set 1 to filter out multicast packets sent by station itself
+ * @port_id:	Multicast MAC addresses array specifier. This is a strange way
+ *		to identify network interface adopted in host-device IF.
+ *		It is used by FW as index in array of addresses. This array has
+ *		MAX_PORT_ID_NUM members.
+ * @count:	Number of MAC addresses in the array
+ * @pass_all:	Set 1 to pass all multicast packets.
+ * @bssid:	current association BSSID.
+ * @addr_list:	Place holder for array of MAC addresses.
+ *		IMPORTANT: add padding if necessary to ensure DWORD alignment.
+ */
+struct iwl_mcast_filter_cmd {
+	u8 filter_own;
+	u8 port_id;
+	u8 count;
+	u8 pass_all;
+	u8 bssid[6];
+	u8 reserved[2];
+	u8 addr_list[0];
+} __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */
+
+#define MAX_BCAST_FILTERS 8
+#define MAX_BCAST_FILTER_ATTRS 2
+
+/**
+ * enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet
+ * @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start.
+ * @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e.
+ *	start of ip payload).
+ */
+enum iwl_mvm_bcast_filter_attr_offset {
+	BCAST_FILTER_OFFSET_PAYLOAD_START = 0,
+	BCAST_FILTER_OFFSET_IP_END = 1,
+};
+
+/**
+ * struct iwl_fw_bcast_filter_attr - broadcast filter attribute
+ * @offset_type:	&enum iwl_mvm_bcast_filter_attr_offset.
+ * @offset:	starting offset of this pattern.
+ * @val:		value to match - big endian (MSB is the first
+ *		byte to match from offset pos).
+ * @mask:	mask to match (big endian).
+ */
+struct iwl_fw_bcast_filter_attr {
+	u8 offset_type;
+	u8 offset;
+	__le16 reserved1;
+	__be32 val;
+	__be32 mask;
+} __packed; /* BCAST_FILTER_ATT_S_VER_1 */
+
+/**
+ * enum iwl_mvm_bcast_filter_frame_type - filter frame type
+ * @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames.
+ * @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames
+ */
+enum iwl_mvm_bcast_filter_frame_type {
+	BCAST_FILTER_FRAME_TYPE_ALL = 0,
+	BCAST_FILTER_FRAME_TYPE_IPV4 = 1,
+};
+
+/**
+ * struct iwl_fw_bcast_filter - broadcast filter
+ * @discard: discard frame (1) or let it pass (0).
+ * @frame_type: &enum iwl_mvm_bcast_filter_frame_type.
+ * @num_attrs: number of valid attributes in this filter.
+ * @attrs: attributes of this filter. a filter is considered matched
+ *	only when all its attributes are matched (i.e. AND relationship)
+ */
+struct iwl_fw_bcast_filter {
+	u8 discard;
+	u8 frame_type;
+	u8 num_attrs;
+	u8 reserved1;
+	struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS];
+} __packed; /* BCAST_FILTER_S_VER_1 */
+
+/**
+ * struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration.
+ * @default_discard: default action for this mac (discard (1) / pass (0)).
+ * @attached_filters: bitmap of relevant filters for this mac.
+ */
+struct iwl_fw_bcast_mac {
+	u8 default_discard;
+	u8 reserved1;
+	__le16 attached_filters;
+} __packed; /* BCAST_MAC_CONTEXT_S_VER_1 */
+
+/**
+ * struct iwl_bcast_filter_cmd - broadcast filtering configuration
+ * @disable: enable (0) / disable (1)
+ * @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS)
+ * @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER)
+ * @filters: broadcast filters
+ * @macs: broadcast filtering configuration per-mac
+ */
+struct iwl_bcast_filter_cmd {
+	u8 disable;
+	u8 max_bcast_filters;
+	u8 max_macs;
+	u8 reserved1;
+	struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS];
+	struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER];
+} __packed; /* BCAST_FILTERING_HCMD_API_S_VER_1 */
+
+/*
+ * enum iwl_mvm_marker_id - maker ids
+ *
+ * The ids for different type of markers to insert into the usniffer logs
+ */
+enum iwl_mvm_marker_id {
+	MARKER_ID_TX_FRAME_LATENCY = 1,
+}; /* MARKER_ID_API_E_VER_1 */
+
+/**
+ * struct iwl_mvm_marker - mark info into the usniffer logs
+ *
+ * (MARKER_CMD = 0xcb)
+ *
+ * Mark the UTC time stamp into the usniffer logs together with additional
+ * metadata, so the usniffer output can be parsed.
+ * In the command response the ucode will return the GP2 time.
+ *
+ * @dw_len: The amount of dwords following this byte including this byte.
+ * @marker_id: A unique marker id (iwl_mvm_marker_id).
+ * @reserved: reserved.
+ * @timestamp: in milliseconds since 1970-01-01 00:00:00 UTC
+ * @metadata: additional meta data that will be written to the unsiffer log
+ */
+struct iwl_mvm_marker {
+	u8 dwLen;
+	u8 markerId;
+	__le16 reserved;
+	__le64 timestamp;
+	__le32 metadata[0];
+} __packed; /* MARKER_API_S_VER_1 */
+
+/*
+ * enum iwl_dc2dc_config_id - flag ids
+ *
+ * Ids of dc2dc configuration flags
+ */
+enum iwl_dc2dc_config_id {
+	DCDC_LOW_POWER_MODE_MSK_SET  = 0x1, /* not used */
+	DCDC_FREQ_TUNE_SET = 0x2,
+}; /* MARKER_ID_API_E_VER_1 */
+
+/**
+ * struct iwl_dc2dc_config_cmd - configure dc2dc values
+ *
+ * (DC2DC_CONFIG_CMD = 0x83)
+ *
+ * Set/Get & configure dc2dc values.
+ * The command always returns the current dc2dc values.
+ *
+ * @flags: set/get dc2dc
+ * @enable_low_power_mode: not used.
+ * @dc2dc_freq_tune0: frequency divider - digital domain
+ * @dc2dc_freq_tune1: frequency divider - analog domain
+ */
+struct iwl_dc2dc_config_cmd {
+	__le32 flags;
+	__le32 enable_low_power_mode; /* not used */
+	__le32 dc2dc_freq_tune0;
+	__le32 dc2dc_freq_tune1;
+} __packed; /* DC2DC_CONFIG_CMD_API_S_VER_1 */
+
+/**
+ * struct iwl_dc2dc_config_resp - response for iwl_dc2dc_config_cmd
+ *
+ * Current dc2dc values returned by the FW.
+ *
+ * @dc2dc_freq_tune0: frequency divider - digital domain
+ * @dc2dc_freq_tune1: frequency divider - analog domain
+ */
+struct iwl_dc2dc_config_resp {
+	__le32 dc2dc_freq_tune0;
+	__le32 dc2dc_freq_tune1;
+} __packed; /* DC2DC_CONFIG_RESP_API_S_VER_1 */
+
+/***********************************
+ * Smart Fifo API
+ ***********************************/
+/* Smart Fifo state */
+enum iwl_sf_state {
+	SF_LONG_DELAY_ON = 0, /* should never be called by driver */
+	SF_FULL_ON,
+	SF_UNINIT,
+	SF_INIT_OFF,
+	SF_HW_NUM_STATES
+};
+
+/* Smart Fifo possible scenario */
+enum iwl_sf_scenario {
+	SF_SCENARIO_SINGLE_UNICAST,
+	SF_SCENARIO_AGG_UNICAST,
+	SF_SCENARIO_MULTICAST,
+	SF_SCENARIO_BA_RESP,
+	SF_SCENARIO_TX_RESP,
+	SF_NUM_SCENARIO
+};
+
+#define SF_TRANSIENT_STATES_NUMBER 2	/* SF_LONG_DELAY_ON and SF_FULL_ON */
+#define SF_NUM_TIMEOUT_TYPES 2		/* Aging timer and Idle timer */
+
+/* smart FIFO default values */
+#define SF_W_MARK_SISO 6144
+#define SF_W_MARK_MIMO2 8192
+#define SF_W_MARK_MIMO3 6144
+#define SF_W_MARK_LEGACY 4096
+#define SF_W_MARK_SCAN 4096
+
+/* SF Scenarios timers for default configuration (aligned to 32 uSec) */
+#define SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160	/* 150 uSec  */
+#define SF_SINGLE_UNICAST_AGING_TIMER_DEF 400	/* 0.4 mSec */
+#define SF_AGG_UNICAST_IDLE_TIMER_DEF 160		/* 150 uSec */
+#define SF_AGG_UNICAST_AGING_TIMER_DEF 400		/* 0.4 mSec */
+#define SF_MCAST_IDLE_TIMER_DEF 160		/* 150 mSec */
+#define SF_MCAST_AGING_TIMER_DEF 400		/* 0.4 mSec */
+#define SF_BA_IDLE_TIMER_DEF 160			/* 150 uSec */
+#define SF_BA_AGING_TIMER_DEF 400			/* 0.4 mSec */
+#define SF_TX_RE_IDLE_TIMER_DEF 160			/* 150 uSec */
+#define SF_TX_RE_AGING_TIMER_DEF 400		/* 0.4 mSec */
+
+/* SF Scenarios timers for BSS MAC configuration (aligned to 32 uSec) */
+#define SF_SINGLE_UNICAST_IDLE_TIMER 320	/* 300 uSec  */
+#define SF_SINGLE_UNICAST_AGING_TIMER 2016	/* 2 mSec */
+#define SF_AGG_UNICAST_IDLE_TIMER 320		/* 300 uSec */
+#define SF_AGG_UNICAST_AGING_TIMER 2016		/* 2 mSec */
+#define SF_MCAST_IDLE_TIMER 2016		/* 2 mSec */
+#define SF_MCAST_AGING_TIMER 10016		/* 10 mSec */
+#define SF_BA_IDLE_TIMER 320			/* 300 uSec */
+#define SF_BA_AGING_TIMER 2016			/* 2 mSec */
+#define SF_TX_RE_IDLE_TIMER 320			/* 300 uSec */
+#define SF_TX_RE_AGING_TIMER 2016		/* 2 mSec */
+
+#define SF_LONG_DELAY_AGING_TIMER 1000000	/* 1 Sec */
+
+#define SF_CFG_DUMMY_NOTIF_OFF	BIT(16)
+
+/**
+ * Smart Fifo configuration command.
+ * @state: smart fifo state, types listed in enum %iwl_sf_sate.
+ * @watermark: Minimum allowed availabe free space in RXF for transient state.
+ * @long_delay_timeouts: aging and idle timer values for each scenario
+ * in long delay state.
+ * @full_on_timeouts: timer values for each scenario in full on state.
+ */
+struct iwl_sf_cfg_cmd {
+	__le32 state;
+	__le32 watermark[SF_TRANSIENT_STATES_NUMBER];
+	__le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
+	__le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES];
+} __packed; /* SF_CFG_API_S_VER_2 */
+
+/***********************************
+ * Location Aware Regulatory (LAR) API - MCC updates
+ ***********************************/
+
+/**
+ * struct iwl_mcc_update_cmd_v1 - Request the device to update geographic
+ * regulatory profile according to the given MCC (Mobile Country Code).
+ * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
+ * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
+ * MCC in the cmd response will be the relevant MCC in the NVM.
+ * @mcc: given mobile country code
+ * @source_id: the source from where we got the MCC, see iwl_mcc_source
+ * @reserved: reserved for alignment
+ */
+struct iwl_mcc_update_cmd_v1 {
+	__le16 mcc;
+	u8 source_id;
+	u8 reserved;
+} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_1 */
+
+/**
+ * struct iwl_mcc_update_cmd - Request the device to update geographic
+ * regulatory profile according to the given MCC (Mobile Country Code).
+ * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
+ * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
+ * MCC in the cmd response will be the relevant MCC in the NVM.
+ * @mcc: given mobile country code
+ * @source_id: the source from where we got the MCC, see iwl_mcc_source
+ * @reserved: reserved for alignment
+ * @key: integrity key for MCC API OEM testing
+ * @reserved2: reserved
+ */
+struct iwl_mcc_update_cmd {
+	__le16 mcc;
+	u8 source_id;
+	u8 reserved;
+	__le32 key;
+	__le32 reserved2[5];
+} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */
+
+/**
+ * iwl_mcc_update_resp_v1  - response to MCC_UPDATE_CMD.
+ * Contains the new channel control profile map, if changed, and the new MCC
+ * (mobile country code).
+ * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
+ * @status: see &enum iwl_mcc_update_status
+ * @mcc: the new applied MCC
+ * @cap: capabilities for all channels which matches the MCC
+ * @source_id: the MCC source, see iwl_mcc_source
+ * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
+ *		channels, depending on platform)
+ * @channels: channel control data map, DWORD for each channel. Only the first
+ *	16bits are used.
+ */
+struct iwl_mcc_update_resp_v1  {
+	__le32 status;
+	__le16 mcc;
+	u8 cap;
+	u8 source_id;
+	__le32 n_channels;
+	__le32 channels[0];
+} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */
+
+/**
+ * iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
+ * Contains the new channel control profile map, if changed, and the new MCC
+ * (mobile country code).
+ * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
+ * @status: see &enum iwl_mcc_update_status
+ * @mcc: the new applied MCC
+ * @cap: capabilities for all channels which matches the MCC
+ * @source_id: the MCC source, see iwl_mcc_source
+ * @time: time elapsed from the MCC test start (in 30 seconds TU)
+ * @reserved: reserved.
+ * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
+ *		channels, depending on platform)
+ * @channels: channel control data map, DWORD for each channel. Only the first
+ *	16bits are used.
+ */
+struct iwl_mcc_update_resp {
+	__le32 status;
+	__le16 mcc;
+	u8 cap;
+	u8 source_id;
+	__le16 time;
+	__le16 reserved;
+	__le32 n_channels;
+	__le32 channels[0];
+} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_2 */
+
+/**
+ * struct iwl_mcc_chub_notif - chub notifies of mcc change
+ * (MCC_CHUB_UPDATE_CMD = 0xc9)
+ * The Chub (Communication Hub, CommsHUB) is a HW component that connects to
+ * the cellular and connectivity cores that gets updates of the mcc, and
+ * notifies the ucode directly of any mcc change.
+ * The ucode requests the driver to request the device to update geographic
+ * regulatory  profile according to the given MCC (Mobile Country Code).
+ * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
+ * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
+ * MCC in the cmd response will be the relevant MCC in the NVM.
+ * @mcc: given mobile country code
+ * @source_id: identity of the change originator, see iwl_mcc_source
+ * @reserved1: reserved for alignment
+ */
+struct iwl_mcc_chub_notif {
+	u16 mcc;
+	u8 source_id;
+	u8 reserved1;
+} __packed; /* LAR_MCC_NOTIFY_S */
+
+enum iwl_mcc_update_status {
+	MCC_RESP_NEW_CHAN_PROFILE,
+	MCC_RESP_SAME_CHAN_PROFILE,
+	MCC_RESP_INVALID,
+	MCC_RESP_NVM_DISABLED,
+	MCC_RESP_ILLEGAL,
+	MCC_RESP_LOW_PRIORITY,
+	MCC_RESP_TEST_MODE_ACTIVE,
+	MCC_RESP_TEST_MODE_NOT_ACTIVE,
+	MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE,
+};
+
+enum iwl_mcc_source {
+	MCC_SOURCE_OLD_FW = 0,
+	MCC_SOURCE_ME = 1,
+	MCC_SOURCE_BIOS = 2,
+	MCC_SOURCE_3G_LTE_HOST = 3,
+	MCC_SOURCE_3G_LTE_DEVICE = 4,
+	MCC_SOURCE_WIFI = 5,
+	MCC_SOURCE_RESERVED = 6,
+	MCC_SOURCE_DEFAULT = 7,
+	MCC_SOURCE_UNINITIALIZED = 8,
+	MCC_SOURCE_MCC_API = 9,
+	MCC_SOURCE_GET_CURRENT = 0x10,
+	MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11,
+};
+
+/* DTS measurements */
+
+enum iwl_dts_measurement_flags {
+	DTS_TRIGGER_CMD_FLAGS_TEMP	= BIT(0),
+	DTS_TRIGGER_CMD_FLAGS_VOLT	= BIT(1),
+};
+
+/**
+ * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements
+ *
+ * @flags: indicates which measurements we want as specified in &enum
+ *	   iwl_dts_measurement_flags
+ */
+struct iwl_dts_measurement_cmd {
+	__le32 flags;
+} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */
+
+/**
+* enum iwl_dts_control_measurement_mode - DTS measurement type
+* @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read
+*                 back (latest value. Not waiting for new value). Use automatic
+*                 SW DTS configuration.
+* @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings,
+*                    trigger DTS reading and provide read back temperature read
+*                    when available.
+* @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read
+* @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result,
+*                              without measurement trigger.
+*/
+enum iwl_dts_control_measurement_mode {
+	DTS_AUTOMATIC			= 0,
+	DTS_REQUEST_READ		= 1,
+	DTS_OVER_WRITE			= 2,
+	DTS_DIRECT_WITHOUT_MEASURE	= 3,
+};
+
+/**
+* enum iwl_dts_used - DTS to use or used for measurement in the DTS request
+* @DTS_USE_TOP: Top
+* @DTS_USE_CHAIN_A: chain A
+* @DTS_USE_CHAIN_B: chain B
+* @DTS_USE_CHAIN_C: chain C
+* @XTAL_TEMPERATURE - read temperature from xtal
+*/
+enum iwl_dts_used {
+	DTS_USE_TOP		= 0,
+	DTS_USE_CHAIN_A		= 1,
+	DTS_USE_CHAIN_B		= 2,
+	DTS_USE_CHAIN_C		= 3,
+	XTAL_TEMPERATURE	= 4,
+};
+
+/**
+* enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode
+* @DTS_BIT6_MODE: bit 6 mode
+* @DTS_BIT8_MODE: bit 8 mode
+*/
+enum iwl_dts_bit_mode {
+	DTS_BIT6_MODE	= 0,
+	DTS_BIT8_MODE	= 1,
+};
+
+/**
+ * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements
+ * @control_mode: see &enum iwl_dts_control_measurement_mode
+ * @temperature: used when over write DTS mode is selected
+ * @sensor: set temperature sensor to use. See &enum iwl_dts_used
+ * @avg_factor: average factor to DTS in request DTS read mode
+ * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode
+ * @step_duration: step duration for the DTS
+ */
+struct iwl_ext_dts_measurement_cmd {
+	__le32 control_mode;
+	__le32 temperature;
+	__le32 sensor;
+	__le32 avg_factor;
+	__le32 bit_mode;
+	__le32 step_duration;
+} __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */
+
+/**
+ * iwl_dts_measurement_notif - notification received with the measurements
+ *
+ * @temp: the measured temperature
+ * @voltage: the measured voltage
+ */
+struct iwl_dts_measurement_notif {
+	__le32 temp;
+	__le32 voltage;
+} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S */
+
+/***********************************
+ * TDLS API
+ ***********************************/
+
+/* Type of TDLS request */
+enum iwl_tdls_channel_switch_type {
+	TDLS_SEND_CHAN_SW_REQ = 0,
+	TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH,
+	TDLS_MOVE_CH,
+}; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */
+
+/**
+ * Switch timing sub-element in a TDLS channel-switch command
+ * @frame_timestamp: GP2 timestamp of channel-switch request/response packet
+ *	received from peer
+ * @max_offchan_duration: What amount of microseconds out of a DTIM is given
+ *	to the TDLS off-channel communication. For instance if the DTIM is
+ *	200TU and the TDLS peer is to be given 25% of the time, the value
+ *	given will be 50TU, or 50 * 1024 if translated into microseconds.
+ * @switch_time: switch time the peer sent in its channel switch timing IE
+ * @switch_timout: switch timeout the peer sent in its channel switch timing IE
+ */
+struct iwl_tdls_channel_switch_timing {
+	__le32 frame_timestamp; /* GP2 time of peer packet Rx */
+	__le32 max_offchan_duration; /* given in micro-seconds */
+	__le32 switch_time; /* given in micro-seconds */
+	__le32 switch_timeout; /* given in micro-seconds */
+} __packed; /* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */
+
+#define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200
+
+/**
+ * TDLS channel switch frame template
+ *
+ * A template representing a TDLS channel-switch request or response frame
+ *
+ * @switch_time_offset: offset to the channel switch timing IE in the template
+ * @tx_cmd: Tx parameters for the frame
+ * @data: frame data
+ */
+struct iwl_tdls_channel_switch_frame {
+	__le32 switch_time_offset;
+	struct iwl_tx_cmd tx_cmd;
+	u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE];
+} __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */
+
+/**
+ * TDLS channel switch command
+ *
+ * The command is sent to initiate a channel switch and also in response to
+ * incoming TDLS channel-switch request/response packets from remote peers.
+ *
+ * @switch_type: see &enum iwl_tdls_channel_switch_type
+ * @peer_sta_id: station id of TDLS peer
+ * @ci: channel we switch to
+ * @timing: timing related data for command
+ * @frame: channel-switch request/response template, depending to switch_type
+ */
+struct iwl_tdls_channel_switch_cmd {
+	u8 switch_type;
+	__le32 peer_sta_id;
+	struct iwl_fw_channel_info ci;
+	struct iwl_tdls_channel_switch_timing timing;
+	struct iwl_tdls_channel_switch_frame frame;
+} __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */
+
+/**
+ * TDLS channel switch start notification
+ *
+ * @status: non-zero on success
+ * @offchannel_duration: duration given in microseconds
+ * @sta_id: peer currently performing the channel-switch with
+ */
+struct iwl_tdls_channel_switch_notif {
+	__le32 status;
+	__le32 offchannel_duration;
+	__le32 sta_id;
+} __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */
+
+/**
+ * TDLS station info
+ *
+ * @sta_id: station id of the TDLS peer
+ * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx
+ * @tx_to_peer_ssn: initial SSN the FW should use for Tx on its TID vs the peer
+ * @is_initiator: 1 if the peer is the TDLS link initiator, 0 otherwise
+ */
+struct iwl_tdls_sta_info {
+	u8 sta_id;
+	u8 tx_to_peer_tid;
+	__le16 tx_to_peer_ssn;
+	__le32 is_initiator;
+} __packed; /* TDLS_STA_INFO_VER_1 */
+
+/**
+ * TDLS basic config command
+ *
+ * @id_and_color: MAC id and color being configured
+ * @tdls_peer_count: amount of currently connected TDLS peers
+ * @tx_to_ap_tid: TID reverved vs. the AP for FW based Tx
+ * @tx_to_ap_ssn: initial SSN the FW should use for Tx on its TID vs. the AP
+ * @sta_info: per-station info. Only the first tdls_peer_count entries are set
+ * @pti_req_data_offset: offset of network-level data for the PTI template
+ * @pti_req_tx_cmd: Tx parameters for PTI request template
+ * @pti_req_template: PTI request template data
+ */
+struct iwl_tdls_config_cmd {
+	__le32 id_and_color; /* mac id and color */
+	u8 tdls_peer_count;
+	u8 tx_to_ap_tid;
+	__le16 tx_to_ap_ssn;
+	struct iwl_tdls_sta_info sta_info[IWL_MVM_TDLS_STA_COUNT];
+
+	__le32 pti_req_data_offset;
+	struct iwl_tx_cmd pti_req_tx_cmd;
+	u8 pti_req_template[0];
+} __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */
+
+/**
+ * TDLS per-station config information from FW
+ *
+ * @sta_id: station id of the TDLS peer
+ * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to
+ *	the peer
+ */
+struct iwl_tdls_config_sta_info_res {
+	__le16 sta_id;
+	__le16 tx_to_peer_last_seq;
+} __packed; /* TDLS_STA_INFO_RSP_VER_1 */
+
+/**
+ * TDLS config information from FW
+ *
+ * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP
+ * @sta_info: per-station TDLS config information
+ */
+struct iwl_tdls_config_res {
+	__le32 tx_to_ap_last_seq;
+	struct iwl_tdls_config_sta_info_res sta_info[IWL_MVM_TDLS_STA_COUNT];
+} __packed; /* TDLS_CONFIG_RSP_API_S_VER_1 */
+
+#define TX_FIFO_MAX_NUM		8
+#define RX_FIFO_MAX_NUM		2
+
+/**
+ * Shared memory configuration information from the FW
+ *
+ * @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not
+ *	accessible)
+ * @shared_mem_size: shared memory size
+ * @sample_buff_addr: internal sample (mon/adc) buff addr (pre 8000 HW set to
+ *	0x0 as accessible only via DBGM RDAT)
+ * @sample_buff_size: internal sample buff size
+ * @txfifo_addr: start addr of TXF0 (excluding the context table 0.5KB), (pre
+ *	8000 HW set to 0x0 as not accessible)
+ * @txfifo_size: size of TXF0 ... TXF7
+ * @rxfifo_size: RXF1, RXF2 sizes. If there is no RXF2, it'll have a value of 0
+ * @page_buff_addr: used by UMAC and performance debug (page miss analysis),
+ *	when paging is not supported this should be 0
+ * @page_buff_size: size of %page_buff_addr
+ */
+struct iwl_shared_mem_cfg {
+	__le32 shared_mem_addr;
+	__le32 shared_mem_size;
+	__le32 sample_buff_addr;
+	__le32 sample_buff_size;
+	__le32 txfifo_addr;
+	__le32 txfifo_size[TX_FIFO_MAX_NUM];
+	__le32 rxfifo_size[RX_FIFO_MAX_NUM];
+	__le32 page_buff_addr;
+	__le32 page_buff_size;
+} __packed; /* SHARED_MEM_ALLOC_API_S_VER_1 */
+
+#endif /* __fw_api_h__ */