Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.

1 files changed, 630 insertions, 134 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 77e528f5db88..e5d727f537d0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -33,9 +33,7 @@
 #include "iwl-eeprom.h"
 #include "iwl-dev.h"
 #include "iwl-core.h"
-#include "iwl-sta.h"
 #include "iwl-io.h"
-#include "iwl-helpers.h"
 #include "iwl-agn.h"
 #include "iwl-trans.h"
 
@@ -68,14 +66,14 @@ static int iwl_send_scan_abort(struct iwl_priv *priv)
 	/* Exit instantly with error when device is not ready
 	 * to receive scan abort command or it does not perform
 	 * hardware scan currently */
-	if (!test_bit(STATUS_READY, &priv->status) ||
-	    !test_bit(STATUS_GEO_CONFIGURED, &priv->status) ||
-	    !test_bit(STATUS_SCAN_HW, &priv->status) ||
-	    test_bit(STATUS_FW_ERROR, &priv->status) ||
-	    test_bit(STATUS_EXIT_PENDING, &priv->status))
+	if (!test_bit(STATUS_READY, &priv->shrd->status) ||
+	    !test_bit(STATUS_GEO_CONFIGURED, &priv->shrd->status) ||
+	    !test_bit(STATUS_SCAN_HW, &priv->shrd->status) ||
+	    test_bit(STATUS_FW_ERROR, &priv->shrd->status) ||
+	    test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
 		return -EIO;
 
-	ret = trans_send_cmd(&priv->trans, &cmd);
+	ret = iwl_trans_send_cmd(trans(priv), &cmd);
 	if (ret)
 		return ret;
 
@@ -91,7 +89,7 @@ static int iwl_send_scan_abort(struct iwl_priv *priv)
 		ret = -EIO;
 	}
 
-	iwl_free_pages(priv, cmd.reply_page);
+	iwl_free_pages(priv->shrd, cmd.reply_page);
 	return ret;
 }
 
@@ -103,24 +101,90 @@ static void iwl_complete_scan(struct iwl_priv *priv, bool aborted)
 		ieee80211_scan_completed(priv->hw, aborted);
 	}
 
+	if (priv->scan_type == IWL_SCAN_ROC) {
+		ieee80211_remain_on_channel_expired(priv->hw);
+		priv->hw_roc_channel = NULL;
+		schedule_delayed_work(&priv->hw_roc_disable_work, 10 * HZ);
+	}
+
 	priv->scan_type = IWL_SCAN_NORMAL;
 	priv->scan_vif = NULL;
 	priv->scan_request = NULL;
 }
 
+static void iwl_process_scan_complete(struct iwl_priv *priv)
+{
+	bool aborted;
+
+	lockdep_assert_held(&priv->shrd->mutex);
+
+	if (!test_and_clear_bit(STATUS_SCAN_COMPLETE, &priv->shrd->status))
+		return;
+
+	IWL_DEBUG_SCAN(priv, "Completed scan.\n");
+
+	cancel_delayed_work(&priv->scan_check);
+
+	aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->shrd->status);
+	if (aborted)
+		IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n");
+
+	if (!test_and_clear_bit(STATUS_SCANNING, &priv->shrd->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan already completed.\n");
+		goto out_settings;
+	}
+
+	if (priv->scan_type == IWL_SCAN_ROC) {
+		ieee80211_remain_on_channel_expired(priv->hw);
+		priv->hw_roc_channel = NULL;
+		schedule_delayed_work(&priv->hw_roc_disable_work, 10 * HZ);
+	}
+
+	if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) {
+		int err;
+
+		/* Check if mac80211 requested scan during our internal scan */
+		if (priv->scan_request == NULL)
+			goto out_complete;
+
+		/* If so request a new scan */
+		err = iwl_scan_initiate(priv, priv->scan_vif, IWL_SCAN_NORMAL,
+					priv->scan_request->channels[0]->band);
+		if (err) {
+			IWL_DEBUG_SCAN(priv,
+				"failed to initiate pending scan: %d\n", err);
+			aborted = true;
+			goto out_complete;
+		}
+
+		return;
+	}
+
+out_complete:
+	iwl_complete_scan(priv, aborted);
+
+out_settings:
+	/* Can we still talk to firmware ? */
+	if (!iwl_is_ready_rf(priv->shrd))
+		return;
+
+	iwlagn_post_scan(priv);
+}
+
 void iwl_force_scan_end(struct iwl_priv *priv)
 {
-	lockdep_assert_held(&priv->mutex);
+	lockdep_assert_held(&priv->shrd->mutex);
 
-	if (!test_bit(STATUS_SCANNING, &priv->status)) {
+	if (!test_bit(STATUS_SCANNING, &priv->shrd->status)) {
 		IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n");
 		return;
 	}
 
 	IWL_DEBUG_SCAN(priv, "Forcing scan end\n");
-	clear_bit(STATUS_SCANNING, &priv->status);
-	clear_bit(STATUS_SCAN_HW, &priv->status);
-	clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+	clear_bit(STATUS_SCANNING, &priv->shrd->status);
+	clear_bit(STATUS_SCAN_HW, &priv->shrd->status);
+	clear_bit(STATUS_SCAN_ABORTING, &priv->shrd->status);
+	clear_bit(STATUS_SCAN_COMPLETE, &priv->shrd->status);
 	iwl_complete_scan(priv, true);
 }
 
@@ -128,14 +192,14 @@ static void iwl_do_scan_abort(struct iwl_priv *priv)
 {
 	int ret;
 
-	lockdep_assert_held(&priv->mutex);
+	lockdep_assert_held(&priv->shrd->mutex);
 
-	if (!test_bit(STATUS_SCANNING, &priv->status)) {
+	if (!test_bit(STATUS_SCANNING, &priv->shrd->status)) {
 		IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n");
 		return;
 	}
 
-	if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+	if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->shrd->status)) {
 		IWL_DEBUG_SCAN(priv, "Scan abort in progress\n");
 		return;
 	}
@@ -154,7 +218,7 @@ static void iwl_do_scan_abort(struct iwl_priv *priv)
 int iwl_scan_cancel(struct iwl_priv *priv)
 {
 	IWL_DEBUG_SCAN(priv, "Queuing abort scan\n");
-	queue_work(priv->workqueue, &priv->abort_scan);
+	queue_work(priv->shrd->workqueue, &priv->abort_scan);
 	return 0;
 }
 
@@ -163,28 +227,42 @@ int iwl_scan_cancel(struct iwl_priv *priv)
  * @ms: amount of time to wait (in milliseconds) for scan to abort
  *
  */
-int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
+void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
 {
 	unsigned long timeout = jiffies + msecs_to_jiffies(ms);
 
-	lockdep_assert_held(&priv->mutex);
+	lockdep_assert_held(&priv->shrd->mutex);
 
 	IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n");
 
 	iwl_do_scan_abort(priv);
 
 	while (time_before_eq(jiffies, timeout)) {
-		if (!test_bit(STATUS_SCAN_HW, &priv->status))
-			break;
+		if (!test_bit(STATUS_SCAN_HW, &priv->shrd->status))
+			goto finished;
 		msleep(20);
 	}
 
-	return test_bit(STATUS_SCAN_HW, &priv->status);
+	return;
+
+ finished:
+	/*
+	 * Now STATUS_SCAN_HW is clear. This means that the
+	 * device finished, but the background work is going
+	 * to execute at best as soon as we release the mutex.
+	 * Since we need to be able to issue a new scan right
+	 * after this function returns, run the complete here.
+	 * The STATUS_SCAN_COMPLETE bit will then be cleared
+	 * and prevent the background work from "completing"
+	 * a possible new scan.
+	 */
+	iwl_process_scan_complete(priv);
 }
 
 /* Service response to REPLY_SCAN_CMD (0x80) */
-static void iwl_rx_reply_scan(struct iwl_priv *priv,
-			      struct iwl_rx_mem_buffer *rxb)
+static int iwl_rx_reply_scan(struct iwl_priv *priv,
+			      struct iwl_rx_mem_buffer *rxb,
+			      struct iwl_device_cmd *cmd)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
@@ -193,11 +271,13 @@ static void iwl_rx_reply_scan(struct iwl_priv *priv,
 
 	IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status);
 #endif
+	return 0;
 }
 
 /* Service SCAN_START_NOTIFICATION (0x82) */
-static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
-				    struct iwl_rx_mem_buffer *rxb)
+static int iwl_rx_scan_start_notif(struct iwl_priv *priv,
+				    struct iwl_rx_mem_buffer *rxb,
+				    struct iwl_device_cmd *cmd)
 {
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scanstart_notification *notif =
@@ -211,11 +291,20 @@ static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
 		       le32_to_cpu(notif->tsf_high),
 		       le32_to_cpu(notif->tsf_low),
 		       notif->status, notif->beacon_timer);
+
+	if (priv->scan_type == IWL_SCAN_ROC &&
+	    !priv->hw_roc_start_notified) {
+		ieee80211_ready_on_channel(priv->hw);
+		priv->hw_roc_start_notified = true;
+	}
+
+	return 0;
 }
 
 /* Service SCAN_RESULTS_NOTIFICATION (0x83) */
-static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
-				      struct iwl_rx_mem_buffer *rxb)
+static int iwl_rx_scan_results_notif(struct iwl_priv *priv,
+				      struct iwl_rx_mem_buffer *rxb,
+				      struct iwl_device_cmd *cmd)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
@@ -224,20 +313,24 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
 
 	IWL_DEBUG_SCAN(priv, "Scan ch.res: "
 		       "%d [802.11%s] "
+		       "probe status: %u:%u "
 		       "(TSF: 0x%08X:%08X) - %d "
 		       "elapsed=%lu usec\n",
 		       notif->channel,
 		       notif->band ? "bg" : "a",
+		       notif->probe_status, notif->num_probe_not_sent,
 		       le32_to_cpu(notif->tsf_high),
 		       le32_to_cpu(notif->tsf_low),
 		       le32_to_cpu(notif->statistics[0]),
 		       le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf);
 #endif
+	return 0;
 }
 
 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
-static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
-				       struct iwl_rx_mem_buffer *rxb)
+static int iwl_rx_scan_complete_notif(struct iwl_priv *priv,
+				       struct iwl_rx_mem_buffer *rxb,
+				       struct iwl_device_cmd *cmd)
 {
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
@@ -247,14 +340,21 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 		       scan_notif->tsf_low,
 		       scan_notif->tsf_high, scan_notif->status);
 
-	/* The HW is no longer scanning */
-	clear_bit(STATUS_SCAN_HW, &priv->status);
-
 	IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n",
 		       (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
 		       jiffies_to_msecs(jiffies - priv->scan_start));
 
-	queue_work(priv->workqueue, &priv->scan_completed);
+	/*
+	 * When aborting, we run the scan completed background work inline
+	 * and the background work must then do nothing. The SCAN_COMPLETE
+	 * bit helps implement that logic and thus needs to be set before
+	 * queueing the work. Also, since the scan abort waits for SCAN_HW
+	 * to clear, we need to set SCAN_COMPLETE before clearing SCAN_HW
+	 * to avoid a race there.
+	 */
+	set_bit(STATUS_SCAN_COMPLETE, &priv->shrd->status);
+	clear_bit(STATUS_SCAN_HW, &priv->shrd->status);
+	queue_work(priv->shrd->workqueue, &priv->scan_completed);
 
 	if (priv->iw_mode != NL80211_IFTYPE_ADHOC &&
 	    iwl_advanced_bt_coexist(priv) &&
@@ -274,8 +374,10 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 				IWL_BT_COEX_TRAFFIC_LOAD_NONE;
 		}
 		priv->bt_status = scan_notif->bt_status;
-		queue_work(priv->workqueue, &priv->bt_traffic_change_work);
+		queue_work(priv->shrd->workqueue,
+			   &priv->bt_traffic_change_work);
 	}
+	return 0;
 }
 
 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
@@ -289,9 +391,8 @@ void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
 					iwl_rx_scan_complete_notif;
 }
 
-inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
-				     enum ieee80211_band band,
-				     u8 n_probes)
+static u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
+				     enum ieee80211_band band, u8 n_probes)
 {
 	if (band == IEEE80211_BAND_5GHZ)
 		return IWL_ACTIVE_DWELL_TIME_52 +
@@ -301,40 +402,486 @@ inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
 			IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
 }
 
-u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
-			       enum ieee80211_band band,
-			       struct ieee80211_vif *vif)
+static u16 iwl_limit_dwell(struct iwl_priv *priv, u16 dwell_time)
 {
 	struct iwl_rxon_context *ctx;
+
+	/*
+	 * If we're associated, we clamp the dwell time 98%
+	 * of the smallest beacon interval (minus 2 * channel
+	 * tune time)
+	 */
+	for_each_context(priv, ctx) {
+		u16 value;
+
+		if (!iwl_is_associated_ctx(ctx))
+			continue;
+		value = ctx->beacon_int;
+		if (!value)
+			value = IWL_PASSIVE_DWELL_BASE;
+		value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+		dwell_time = min(value, dwell_time);
+	}
+
+	return dwell_time;
+}
+
+static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
+				      enum ieee80211_band band)
+{
 	u16 passive = (band == IEEE80211_BAND_2GHZ) ?
 	    IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
 	    IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
 
-	if (iwl_is_any_associated(priv)) {
+	return iwl_limit_dwell(priv, passive);
+}
+
+static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
+					   struct ieee80211_vif *vif,
+					   enum ieee80211_band band,
+					   struct iwl_scan_channel *scan_ch)
+{
+	const struct ieee80211_supported_band *sband;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added = 0;
+	u16 channel = 0;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband) {
+		IWL_ERR(priv, "invalid band\n");
+		return added;
+	}
+
+	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+	passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+	channel = iwl_get_single_channel_number(priv, band);
+	if (channel) {
+		scan_ch->channel = cpu_to_le16(channel);
+		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		/* Set txpower levels to defaults */
+		scan_ch->dsp_atten = 110;
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+		added++;
+	} else
+		IWL_ERR(priv, "no valid channel found\n");
+	return added;
+}
+
+static int iwl_get_channels_for_scan(struct iwl_priv *priv,
+				     struct ieee80211_vif *vif,
+				     enum ieee80211_band band,
+				     u8 is_active, u8 n_probes,
+				     struct iwl_scan_channel *scan_ch)
+{
+	struct ieee80211_channel *chan;
+	const struct ieee80211_supported_band *sband;
+	const struct iwl_channel_info *ch_info;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added, i;
+	u16 channel;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband)
+		return 0;
+
+	active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
+	passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+	for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
+		chan = priv->scan_request->channels[i];
+
+		if (chan->band != band)
+			continue;
+
+		channel = chan->hw_value;
+		scan_ch->channel = cpu_to_le16(channel);
+
+		ch_info = iwl_get_channel_info(priv, band, channel);
+		if (!is_channel_valid(ch_info)) {
+			IWL_DEBUG_SCAN(priv,
+				       "Channel %d is INVALID for this band.\n",
+				       channel);
+			continue;
+		}
+
+		if (!is_active || is_channel_passive(ch_info) ||
+		    (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
+			scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+		else
+			scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
+
+		if (n_probes)
+			scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
+
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+		/* Set txpower levels to defaults */
+		scan_ch->dsp_atten = 110;
+
+		/* NOTE: if we were doing 6Mb OFDM for scans we'd use
+		 * power level:
+		 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+		 */
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+
+		IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
+			       channel, le32_to_cpu(scan_ch->type),
+			       (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+				"ACTIVE" : "PASSIVE",
+			       (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+			       active_dwell : passive_dwell);
+
+		scan_ch++;
+		added++;
+	}
+
+	IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
+	return added;
+}
+
+static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
+{
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_SCAN_CMD,
+		.len = { sizeof(struct iwl_scan_cmd), },
+		.flags = CMD_SYNC,
+	};
+	struct iwl_scan_cmd *scan;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	u32 rate_flags = 0;
+	u16 cmd_len;
+	u16 rx_chain = 0;
+	enum ieee80211_band band;
+	u8 n_probes = 0;
+	u8 rx_ant = hw_params(priv).valid_rx_ant;
+	u8 rate;
+	bool is_active = false;
+	int  chan_mod;
+	u8 active_chains;
+	u8 scan_tx_antennas = hw_params(priv).valid_tx_ant;
+	int ret;
+
+	lockdep_assert_held(&priv->shrd->mutex);
+
+	if (vif)
+		ctx = iwl_rxon_ctx_from_vif(vif);
+
+	if (!priv->scan_cmd) {
+		priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) +
+					 IWL_MAX_SCAN_SIZE, GFP_KERNEL);
+		if (!priv->scan_cmd) {
+			IWL_DEBUG_SCAN(priv,
+				       "fail to allocate memory for scan\n");
+			return -ENOMEM;
+		}
+	}
+	scan = priv->scan_cmd;
+	memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
+
+	scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
+	scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
+
+	if (priv->scan_type != IWL_SCAN_ROC &&
+	    iwl_is_any_associated(priv)) {
+		u16 interval = 0;
+		u32 extra;
+		u32 suspend_time = 100;
+		u32 scan_suspend_time = 100;
+
+		IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
+		switch (priv->scan_type) {
+		case IWL_SCAN_ROC:
+			WARN_ON(1);
+			break;
+		case IWL_SCAN_RADIO_RESET:
+			interval = 0;
+			break;
+		case IWL_SCAN_NORMAL:
+			interval = vif->bss_conf.beacon_int;
+			break;
+		}
+
+		scan->suspend_time = 0;
+		scan->max_out_time = cpu_to_le32(200 * 1024);
+		if (!interval)
+			interval = suspend_time;
+
+		extra = (suspend_time / interval) << 22;
+		scan_suspend_time = (extra |
+		    ((suspend_time % interval) * 1024));
+		scan->suspend_time = cpu_to_le32(scan_suspend_time);
+		IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
+			       scan_suspend_time, interval);
+	} else if (priv->scan_type == IWL_SCAN_ROC) {
+		scan->suspend_time = 0;
+		scan->max_out_time = 0;
+		scan->quiet_time = 0;
+		scan->quiet_plcp_th = 0;
+	}
+
+	switch (priv->scan_type) {
+	case IWL_SCAN_RADIO_RESET:
+		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+		break;
+	case IWL_SCAN_NORMAL:
+		if (priv->scan_request->n_ssids) {
+			int i, p = 0;
+			IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+			for (i = 0; i < priv->scan_request->n_ssids; i++) {
+				/* always does wildcard anyway */
+				if (!priv->scan_request->ssids[i].ssid_len)
+					continue;
+				scan->direct_scan[p].id = WLAN_EID_SSID;
+				scan->direct_scan[p].len =
+					priv->scan_request->ssids[i].ssid_len;
+				memcpy(scan->direct_scan[p].ssid,
+				       priv->scan_request->ssids[i].ssid,
+				       priv->scan_request->ssids[i].ssid_len);
+				n_probes++;
+				p++;
+			}
+			is_active = true;
+		} else
+			IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
+		break;
+	case IWL_SCAN_ROC:
+		IWL_DEBUG_SCAN(priv, "Start ROC scan.\n");
+		break;
+	}
+
+	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+	scan->tx_cmd.sta_id = ctx->bcast_sta_id;
+	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+	switch (priv->scan_band) {
+	case IEEE80211_BAND_2GHZ:
+		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+		chan_mod = le32_to_cpu(
+			priv->contexts[IWL_RXON_CTX_BSS].active.flags &
+						RXON_FLG_CHANNEL_MODE_MSK)
+				       >> RXON_FLG_CHANNEL_MODE_POS;
+		if (chan_mod == CHANNEL_MODE_PURE_40) {
+			rate = IWL_RATE_6M_PLCP;
+		} else {
+			rate = IWL_RATE_1M_PLCP;
+			rate_flags = RATE_MCS_CCK_MSK;
+		}
 		/*
-		 * If we're associated, we clamp the maximum passive
-		 * dwell time to be 98% of the smallest beacon interval
-		 * (minus 2 * channel tune time)
+		 * Internal scans are passive, so we can indiscriminately set
+		 * the BT ignore flag on 2.4 GHz since it applies to TX only.
 		 */
-		for_each_context(priv, ctx) {
-			u16 value;
-
-			if (!iwl_is_associated_ctx(ctx))
-				continue;
-			value = ctx->vif ? ctx->vif->bss_conf.beacon_int : 0;
-			if ((value > IWL_PASSIVE_DWELL_BASE) || !value)
-				value = IWL_PASSIVE_DWELL_BASE;
-			value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
-			passive = min(value, passive);
+		if (priv->cfg->bt_params &&
+		    priv->cfg->bt_params->advanced_bt_coexist)
+			scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		rate = IWL_RATE_6M_PLCP;
+		break;
+	default:
+		IWL_WARN(priv, "Invalid scan band\n");
+		return -EIO;
+	}
+
+	/*
+	 * If active scanning is requested but a certain channel is
+	 * marked passive, we can do active scanning if we detect
+	 * transmissions.
+	 *
+	 * There is an issue with some firmware versions that triggers
+	 * a sysassert on a "good CRC threshold" of zero (== disabled),
+	 * on a radar channel even though this means that we should NOT
+	 * send probes.
+	 *
+	 * The "good CRC threshold" is the number of frames that we
+	 * need to receive during our dwell time on a channel before
+	 * sending out probes -- setting this to a huge value will
+	 * mean we never reach it, but at the same time work around
+	 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
+	 * here instead of IWL_GOOD_CRC_TH_DISABLED.
+	 *
+	 * This was fixed in later versions along with some other
+	 * scan changes, and the threshold behaves as a flag in those
+	 * versions.
+	 */
+	if (priv->new_scan_threshold_behaviour)
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+						IWL_GOOD_CRC_TH_DISABLED;
+	else
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+						IWL_GOOD_CRC_TH_NEVER;
+
+	band = priv->scan_band;
+
+	if (priv->cfg->scan_rx_antennas[band])
+		rx_ant = priv->cfg->scan_rx_antennas[band];
+
+	if (band == IEEE80211_BAND_2GHZ &&
+	    priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		/* transmit 2.4 GHz probes only on first antenna */
+		scan_tx_antennas = first_antenna(scan_tx_antennas);
+	}
+
+	priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv,
+						    priv->scan_tx_ant[band],
+						    scan_tx_antennas);
+	rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
+	scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
+
+	/* In power save mode use one chain, otherwise use all chains */
+	if (test_bit(STATUS_POWER_PMI, &priv->shrd->status)) {
+		/* rx_ant has been set to all valid chains previously */
+		active_chains = rx_ant &
+				((u8)(priv->chain_noise_data.active_chains));
+		if (!active_chains)
+			active_chains = rx_ant;
+
+		IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
+				priv->chain_noise_data.active_chains);
+
+		rx_ant = first_antenna(active_chains);
+	}
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
+	    priv->bt_full_concurrent) {
+		/* operated as 1x1 in full concurrency mode */
+		rx_ant = first_antenna(rx_ant);
+	}
+
+	/* MIMO is not used here, but value is required */
+	rx_chain |=
+		hw_params(priv).valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
+	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+	rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+	scan->rx_chain = cpu_to_le16(rx_chain);
+	switch (priv->scan_type) {
+	case IWL_SCAN_NORMAL:
+		cmd_len = iwl_fill_probe_req(priv,
+					(struct ieee80211_mgmt *)scan->data,
+					vif->addr,
+					priv->scan_request->ie,
+					priv->scan_request->ie_len,
+					IWL_MAX_SCAN_SIZE - sizeof(*scan));
+		break;
+	case IWL_SCAN_RADIO_RESET:
+	case IWL_SCAN_ROC:
+		/* use bcast addr, will not be transmitted but must be valid */
+		cmd_len = iwl_fill_probe_req(priv,
+					(struct ieee80211_mgmt *)scan->data,
+					iwl_bcast_addr, NULL, 0,
+					IWL_MAX_SCAN_SIZE - sizeof(*scan));
+		break;
+	default:
+		BUG();
+	}
+	scan->tx_cmd.len = cpu_to_le16(cmd_len);
+
+	scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+			       RXON_FILTER_BCON_AWARE_MSK);
+
+	switch (priv->scan_type) {
+	case IWL_SCAN_RADIO_RESET:
+		scan->channel_count =
+			iwl_get_single_channel_for_scan(priv, vif, band,
+				(void *)&scan->data[cmd_len]);
+		break;
+	case IWL_SCAN_NORMAL:
+		scan->channel_count =
+			iwl_get_channels_for_scan(priv, vif, band,
+				is_active, n_probes,
+				(void *)&scan->data[cmd_len]);
+		break;
+	case IWL_SCAN_ROC: {
+		struct iwl_scan_channel *scan_ch;
+		int n_chan, i;
+		u16 dwell;
+
+		dwell = iwl_limit_dwell(priv, priv->hw_roc_duration);
+		n_chan = DIV_ROUND_UP(priv->hw_roc_duration, dwell);
+
+		scan->channel_count = n_chan;
+
+		scan_ch = (void *)&scan->data[cmd_len];
+
+		for (i = 0; i < n_chan; i++) {
+			scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+			scan_ch->channel =
+				cpu_to_le16(priv->hw_roc_channel->hw_value);
+
+			if (i == n_chan - 1)
+				dwell = priv->hw_roc_duration - i * dwell;
+
+			scan_ch->active_dwell =
+			scan_ch->passive_dwell = cpu_to_le16(dwell);
+
+			/* Set txpower levels to defaults */
+			scan_ch->dsp_atten = 110;
+
+			/* NOTE: if we were doing 6Mb OFDM for scans we'd use
+			 * power level:
+			 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+			 */
+			if (priv->hw_roc_channel->band == IEEE80211_BAND_5GHZ)
+				scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+			else
+				scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+
+			scan_ch++;
 		}
+		}
+
+		break;
+	}
+
+	if (scan->channel_count == 0) {
+		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
+		return -EIO;
+	}
+
+	cmd.len[0] += le16_to_cpu(scan->tx_cmd.len) +
+	    scan->channel_count * sizeof(struct iwl_scan_channel);
+	cmd.data[0] = scan;
+	cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
+	scan->len = cpu_to_le16(cmd.len[0]);
+
+	/* set scan bit here for PAN params */
+	set_bit(STATUS_SCAN_HW, &priv->shrd->status);
+
+	ret = iwlagn_set_pan_params(priv);
+	if (ret)
+		return ret;
+
+	ret = iwl_trans_send_cmd(trans(priv), &cmd);
+	if (ret) {
+		clear_bit(STATUS_SCAN_HW, &priv->shrd->status);
+		iwlagn_set_pan_params(priv);
 	}
 
-	return passive;
+	return ret;
 }
 
 void iwl_init_scan_params(struct iwl_priv *priv)
 {
-	u8 ant_idx = fls(priv->hw_params.valid_tx_ant) - 1;
+	u8 ant_idx = fls(hw_params(priv).valid_tx_ant) - 1;
 	if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ])
 		priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx;
 	if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
@@ -348,50 +895,50 @@ int __must_check iwl_scan_initiate(struct iwl_priv *priv,
 {
 	int ret;
 
-	lockdep_assert_held(&priv->mutex);
+	lockdep_assert_held(&priv->shrd->mutex);
 
 	cancel_delayed_work(&priv->scan_check);
 
-	if (!iwl_is_ready_rf(priv)) {
+	if (!iwl_is_ready_rf(priv->shrd)) {
 		IWL_WARN(priv, "Request scan called when driver not ready.\n");
 		return -EIO;
 	}
 
-	if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+	if (test_bit(STATUS_SCAN_HW, &priv->shrd->status)) {
 		IWL_DEBUG_SCAN(priv,
 			"Multiple concurrent scan requests in parallel.\n");
 		return -EBUSY;
 	}
 
-	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+	if (test_bit(STATUS_SCAN_ABORTING, &priv->shrd->status)) {
 		IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n");
 		return -EBUSY;
 	}
 
 	IWL_DEBUG_SCAN(priv, "Starting %sscan...\n",
 			scan_type == IWL_SCAN_NORMAL ? "" :
-			scan_type == IWL_SCAN_OFFCH_TX ? "offchan TX " :
+			scan_type == IWL_SCAN_ROC ? "remain-on-channel " :
 			"internal short ");
 
-	set_bit(STATUS_SCANNING, &priv->status);
+	set_bit(STATUS_SCANNING, &priv->shrd->status);
 	priv->scan_type = scan_type;
 	priv->scan_start = jiffies;
 	priv->scan_band = band;
 
 	ret = iwlagn_request_scan(priv, vif);
 	if (ret) {
-		clear_bit(STATUS_SCANNING, &priv->status);
+		clear_bit(STATUS_SCANNING, &priv->shrd->status);
 		priv->scan_type = IWL_SCAN_NORMAL;
 		return ret;
 	}
 
-	queue_delayed_work(priv->workqueue, &priv->scan_check,
+	queue_delayed_work(priv->shrd->workqueue, &priv->scan_check,
 			   IWL_SCAN_CHECK_WATCHDOG);
 
 	return 0;
 }
 
-int iwl_mac_hw_scan(struct ieee80211_hw *hw,
+int iwlagn_mac_hw_scan(struct ieee80211_hw *hw,
 		    struct ieee80211_vif *vif,
 		    struct cfg80211_scan_request *req)
 {
@@ -403,7 +950,7 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 	if (req->n_channels == 0)
 		return -EINVAL;
 
-	mutex_lock(&priv->mutex);
+	mutex_lock(&priv->shrd->mutex);
 
 	/*
 	 * If an internal scan is in progress, just set
@@ -432,7 +979,7 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 
-	mutex_unlock(&priv->mutex);
+	mutex_unlock(&priv->shrd->mutex);
 
 	return ret;
 }
@@ -443,7 +990,7 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
  */
 void iwl_internal_short_hw_scan(struct iwl_priv *priv)
 {
-	queue_work(priv->workqueue, &priv->start_internal_scan);
+	queue_work(priv->shrd->workqueue, &priv->start_internal_scan);
 }
 
 static void iwl_bg_start_internal_scan(struct work_struct *work)
@@ -453,14 +1000,14 @@ static void iwl_bg_start_internal_scan(struct work_struct *work)
 
 	IWL_DEBUG_SCAN(priv, "Start internal scan\n");
 
-	mutex_lock(&priv->mutex);
+	mutex_lock(&priv->shrd->mutex);
 
 	if (priv->scan_type == IWL_SCAN_RADIO_RESET) {
 		IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n");
 		goto unlock;
 	}
 
-	if (test_bit(STATUS_SCANNING, &priv->status)) {
+	if (test_bit(STATUS_SCANNING, &priv->shrd->status)) {
 		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
 		goto unlock;
 	}
@@ -468,7 +1015,7 @@ static void iwl_bg_start_internal_scan(struct work_struct *work)
 	if (iwl_scan_initiate(priv, NULL, IWL_SCAN_RADIO_RESET, priv->band))
 		IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n");
  unlock:
-	mutex_unlock(&priv->mutex);
+	mutex_unlock(&priv->shrd->mutex);
 }
 
 static void iwl_bg_scan_check(struct work_struct *data)
@@ -481,9 +1028,9 @@ static void iwl_bg_scan_check(struct work_struct *data)
 	/* Since we are here firmware does not finish scan and
 	 * most likely is in bad shape, so we don't bother to
 	 * send abort command, just force scan complete to mac80211 */
-	mutex_lock(&priv->mutex);
+	mutex_lock(&priv->shrd->mutex);
 	iwl_force_scan_end(priv);
-	mutex_unlock(&priv->mutex);
+	mutex_unlock(&priv->shrd->mutex);
 }
 
 /**
@@ -541,70 +1088,19 @@ static void iwl_bg_abort_scan(struct work_struct *work)
 
 	/* We keep scan_check work queued in case when firmware will not
 	 * report back scan completed notification */
-	mutex_lock(&priv->mutex);
+	mutex_lock(&priv->shrd->mutex);
 	iwl_scan_cancel_timeout(priv, 200);
-	mutex_unlock(&priv->mutex);
+	mutex_unlock(&priv->shrd->mutex);
 }
 
 static void iwl_bg_scan_completed(struct work_struct *work)
 {
 	struct iwl_priv *priv =
-	    container_of(work, struct iwl_priv, scan_completed);
-	bool aborted;
-
-	IWL_DEBUG_SCAN(priv, "Completed scan.\n");
-
-	cancel_delayed_work(&priv->scan_check);
-
-	mutex_lock(&priv->mutex);
-
-	aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status);
-	if (aborted)
-		IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n");
-
-	if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) {
-		IWL_DEBUG_SCAN(priv, "Scan already completed.\n");
-		goto out_settings;
-	}
-
-	if (priv->scan_type == IWL_SCAN_OFFCH_TX && priv->offchan_tx_skb) {
-		ieee80211_tx_status_irqsafe(priv->hw,
-					    priv->offchan_tx_skb);
-		priv->offchan_tx_skb = NULL;
-	}
-
-	if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) {
-		int err;
-
-		/* Check if mac80211 requested scan during our internal scan */
-		if (priv->scan_request == NULL)
-			goto out_complete;
-
-		/* If so request a new scan */
-		err = iwl_scan_initiate(priv, priv->scan_vif, IWL_SCAN_NORMAL,
-					priv->scan_request->channels[0]->band);
-		if (err) {
-			IWL_DEBUG_SCAN(priv,
-				"failed to initiate pending scan: %d\n", err);
-			aborted = true;
-			goto out_complete;
-		}
-
-		goto out;
-	}
-
-out_complete:
-	iwl_complete_scan(priv, aborted);
-
-out_settings:
-	/* Can we still talk to firmware ? */
-	if (!iwl_is_ready_rf(priv))
-		goto out;
-
-	iwlagn_post_scan(priv);
+		container_of(work, struct iwl_priv, scan_completed);
 
-out:
-	mutex_unlock(&priv->mutex);
+	mutex_lock(&priv->shrd->mutex);
+	iwl_process_scan_complete(priv);
+	mutex_unlock(&priv->shrd->mutex);
 }
 
 void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
@@ -622,8 +1118,8 @@ void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
 	cancel_work_sync(&priv->scan_completed);
 
 	if (cancel_delayed_work_sync(&priv->scan_check)) {
-		mutex_lock(&priv->mutex);
+		mutex_lock(&priv->shrd->mutex);
 		iwl_force_scan_end(priv);
-		mutex_unlock(&priv->mutex);
+		mutex_unlock(&priv->shrd->mutex);
 	}
 }