mt76: mt7915: add thermal cooling device support

Thermal cooling device support is added to control the temperature by
throttling the data transmission for the given duration. Throttling is
done by adjusting Tx period by given percentage of time. The thermal
device allows user to configure duty cycle.

Throttling can be disabled by setting the duty cycle to 0. The cooling
device can be found under /sys/class/thermal/cooling_deviceX/.
Corresponding soft link to this device can be found under phy folder

To set duty cycle as 80%,
echo 80 > /sys/class/ieee80211/phy*/cooling_device/cur_state

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

1 files changed, 35 insertions, 0 deletions

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
index f95920d58a40..7e3432384633 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
@@ -68,6 +68,29 @@ struct mt7915_mcu_rxd {
 	u8 s2d_index;
 };
 
+struct mt7915_mcu_thermal_ctrl {
+	u8 ctrl_id;
+	u8 band_idx;
+	union {
+		struct {
+			u8 protect_type; /* 1: duty admit, 2: radio off */
+			u8 trigger_type; /* 0: low, 1: high */
+		} __packed type;
+		struct {
+			u8 duty_level;	/* level 0~3 */
+			u8 duty_cycle;
+		} __packed duty;
+	};
+} __packed;
+
+struct mt7915_mcu_thermal_notify {
+	struct mt7915_mcu_rxd rxd;
+
+	struct mt7915_mcu_thermal_ctrl ctrl;
+	__le32 temperature;
+	u8 rsv[8];
+} __packed;
+
 struct mt7915_mcu_csa_notify {
 	struct mt7915_mcu_rxd rxd;
 
@@ -262,6 +285,7 @@ enum {
 	MCU_EXT_CMD_FW_LOG_2_HOST = 0x13,
 	MCU_EXT_CMD_TXBF_ACTION = 0x1e,
 	MCU_EXT_CMD_EFUSE_BUFFER_MODE = 0x21,
+	MCU_EXT_CMD_THERMAL_PROT = 0x23,
 	MCU_EXT_CMD_STA_REC_UPDATE = 0x25,
 	MCU_EXT_CMD_BSS_INFO_UPDATE = 0x26,
 	MCU_EXT_CMD_EDCA_UPDATE = 0x27,
@@ -1067,6 +1091,17 @@ enum {
 };
 
 enum {
+	THERMAL_PROTECT_PARAMETER_CTRL,
+	THERMAL_PROTECT_BASIC_INFO,
+	THERMAL_PROTECT_ENABLE,
+	THERMAL_PROTECT_DISABLE,
+	THERMAL_PROTECT_DUTY_CONFIG,
+	THERMAL_PROTECT_MECH_INFO,
+	THERMAL_PROTECT_DUTY_INFO,
+	THERMAL_PROTECT_STATE_ACT,
+};
+
+enum {
 	MT_EBF = BIT(0),	/* explicit beamforming */
 	MT_IBF = BIT(1)		/* implicit beamforming */
 };