add mt7601u driver

Add support for the simplest of MediaTek Wi-Fi devices - MT7601U.
It is a single stream bgn chip with no bells or whistles.
This driver is partially based on Felix's mt76 but IMHO it doesn't
make sense to merge the two right now because MT7601U is a design
somewhere between old Ralink devices and new Mediatek chips.  There
wouldn't be all that much code sharing with the devices mt76 supports.
Situation may obviously change when someone decides to extend m76 with
support for the more recent USB dongles.

The driver supports only station mode.  I'm hoping to add AP support
when time allows.

This driver sat on GitHub for quite a while and got some testing there:
http://github.com/kuba-moo/mt7601u

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 1251 insertions, 0 deletions

diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c
new file mode 100644
index 000000000000..1908af6add87
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt7601u/phy.c
@@ -0,0 +1,1251 @@
+/*
+ * (c) Copyright 2002-2010, Ralink Technology, Inc.
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt7601u.h"
+#include "mcu.h"
+#include "eeprom.h"
+#include "trace.h"
+#include "initvals_phy.h"
+
+#include <linux/etherdevice.h>
+
+static void mt7601u_agc_reset(struct mt7601u_dev *dev);
+
+static int
+mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value)
+{
+	int ret = 0;
+
+	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
+	    WARN_ON(offset > 63))
+		return -EINVAL;
+	if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
+		return 0;
+
+	mutex_lock(&dev->reg_atomic_mutex);
+
+	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) {
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	mt7601u_wr(dev, MT_RF_CSR_CFG, MT76_SET(MT_RF_CSR_CFG_DATA, value) |
+				       MT76_SET(MT_RF_CSR_CFG_REG_BANK, bank) |
+				       MT76_SET(MT_RF_CSR_CFG_REG_ID, offset) |
+				       MT_RF_CSR_CFG_WR |
+				       MT_RF_CSR_CFG_KICK);
+	trace_rf_write(dev, bank, offset, value);
+out:
+	mutex_unlock(&dev->reg_atomic_mutex);
+
+	if (ret < 0)
+		dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n",
+			bank, offset, ret);
+
+	return ret;
+}
+
+static int
+mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset)
+{
+	int ret = -ETIMEDOUT;
+	u32 val;
+
+	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
+	    WARN_ON(offset > 63))
+		return -EINVAL;
+	if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
+		return 0xff;
+
+	mutex_lock(&dev->reg_atomic_mutex);
+
+	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
+		goto out;
+
+	mt7601u_wr(dev, MT_RF_CSR_CFG, MT76_SET(MT_RF_CSR_CFG_REG_BANK, bank) |
+				       MT76_SET(MT_RF_CSR_CFG_REG_ID, offset) |
+				       MT_RF_CSR_CFG_KICK);
+
+	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
+		goto out;
+
+	val = mt7601u_rr(dev, MT_RF_CSR_CFG);
+	if (MT76_GET(MT_RF_CSR_CFG_REG_ID, val) == offset &&
+	    MT76_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) {
+		ret = MT76_GET(MT_RF_CSR_CFG_DATA, val);
+		trace_rf_read(dev, bank, offset, ret);
+	}
+out:
+	mutex_unlock(&dev->reg_atomic_mutex);
+
+	if (ret < 0)
+		dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n",
+			bank, offset, ret);
+
+	return ret;
+}
+
+static int
+mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val)
+{
+	int ret;
+
+	ret = mt7601u_rf_rr(dev, bank, offset);
+	if (ret < 0)
+		return ret;
+	val |= ret & ~mask;
+	ret = mt7601u_rf_wr(dev, bank, offset, val);
+	if (ret)
+		return ret;
+
+	return val;
+}
+
+static int
+mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val)
+{
+	return mt7601u_rf_rmw(dev, bank, offset, 0, val);
+}
+
+static int
+mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask)
+{
+	return mt7601u_rf_rmw(dev, bank, offset, mask, 0);
+}
+
+static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val)
+{
+	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
+	    test_bit(MT7601U_STATE_REMOVED, &dev->state))
+		return;
+
+	mutex_lock(&dev->reg_atomic_mutex);
+
+	if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) {
+		dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset);
+		goto out;
+	}
+
+	mt7601u_wr(dev, MT_BBP_CSR_CFG,
+		   MT76_SET(MT_BBP_CSR_CFG_VAL, val) |
+		   MT76_SET(MT_BBP_CSR_CFG_REG_NUM, offset) |
+		   MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY);
+	trace_bbp_write(dev, offset, val);
+out:
+	mutex_unlock(&dev->reg_atomic_mutex);
+}
+
+static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset)
+{
+	u32 val;
+	int ret = -ETIMEDOUT;
+
+	if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)))
+		return -EINVAL;
+	if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
+		return 0xff;
+
+	mutex_lock(&dev->reg_atomic_mutex);
+
+	if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000))
+		goto out;
+
+	mt7601u_wr(dev, MT_BBP_CSR_CFG,
+		   MT76_SET(MT_BBP_CSR_CFG_REG_NUM, offset) |
+		   MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY |
+		   MT_BBP_CSR_CFG_READ);
+
+	if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000))
+		goto out;
+
+	val = mt7601u_rr(dev, MT_BBP_CSR_CFG);
+	if (MT76_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) {
+		ret = MT76_GET(MT_BBP_CSR_CFG_VAL, val);
+		trace_bbp_read(dev, offset, ret);
+	}
+out:
+	mutex_unlock(&dev->reg_atomic_mutex);
+
+	if (ret < 0)
+		dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n",
+			offset, ret);
+
+	return ret;
+}
+
+static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val)
+{
+	int ret;
+
+	ret = mt7601u_bbp_rr(dev, offset);
+	if (ret < 0)
+		return ret;
+	val |= ret & ~mask;
+	mt7601u_bbp_wr(dev, offset, val);
+
+	return val;
+}
+
+static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val)
+{
+	int ret;
+
+	ret = mt7601u_bbp_rr(dev, offset);
+	if (ret < 0)
+		return ret;
+	val |= ret & ~mask;
+	if (ret != val)
+		mt7601u_bbp_wr(dev, offset, val);
+
+	return val;
+}
+
+int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev)
+{
+	int i = 20;
+	u8 val;
+
+	do {
+		val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION);
+		if (val && ~val)
+			break;
+	} while (--i);
+
+	if (!i) {
+		dev_err(dev->dev, "Error: BBP is not ready\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below)
+{
+	return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0);
+}
+
+int mt7601u_phy_get_rssi(struct mt7601u_dev *dev,
+			 struct mt7601u_rxwi *rxwi, u16 rate)
+{
+	static const s8 lna[2][2][3] = {
+		/* main LNA */ {
+			/* bw20 */ { -2, 15, 33 },
+			/* bw40 */ {  0, 16, 34 }
+		},
+		/*  aux LNA */ {
+			/* bw20 */ { -2, 15, 33 },
+			/* bw40 */ { -2, 16, 34 }
+		}
+	};
+	int bw = MT76_GET(MT_RXWI_RATE_BW, rate);
+	int aux_lna = MT76_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant);
+	int lna_id = MT76_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain);
+	int val;
+
+	if (lna_id) /* LNA id can be 0, 2, 3. */
+		lna_id--;
+
+	val = 8;
+	val -= lna[aux_lna][bw][lna_id];
+	val -= MT76_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain);
+	val -= dev->ee->lna_gain;
+	val -= dev->ee->rssi_offset[0];
+
+	return val;
+}
+
+static void mt7601u_vco_cal(struct mt7601u_dev *dev)
+{
+	mt7601u_rf_wr(dev, 0, 4, 0x0a);
+	mt7601u_rf_wr(dev, 0, 5, 0x20);
+	mt7601u_rf_set(dev, 0, 4, BIT(7));
+	msleep(2);
+}
+
+static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal)
+{
+	u32 filter = 0;
+	int ret;
+
+	if (!cal)
+		filter |= 0x10000;
+	if (dev->bw != MT_BW_20)
+		filter |= 0x00100;
+
+	/* TX */
+	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1);
+	if (ret)
+		return ret;
+	/* RX */
+	return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter);
+}
+
+static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev)
+{
+	const struct reg_table *t;
+
+	if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW))
+		return -EINVAL;
+
+	t = &bbp_mode_table[dev->temp_mode][dev->bw];
+
+	return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n);
+}
+
+static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name)
+{
+	const struct reg_table *t;
+	int ret;
+
+	if (dev->temp_mode == mode)
+		return 0;
+
+	dev->temp_mode = mode;
+	trace_temp_mode(dev, mode);
+
+	t = bbp_mode_table[dev->temp_mode];
+	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
+				      t[2].regs, t[2].n);
+	if (ret)
+		return ret;
+
+	return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
+				       t[dev->bw].regs, t[dev->bw].n);
+}
+
+static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan)
+{
+	struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
+
+	if (hw_chan != 14 || dev->bw != MT_BW_20) {
+		mt7601u_bbp_rmw(dev, 4, 0x20, 0);
+		mt7601u_bbp_wr(dev, 178, 0xff);
+
+		t->cck[0].bw20 = dev->ee->real_cck_bw20[0];
+		t->cck[1].bw20 = dev->ee->real_cck_bw20[1];
+	} else { /* Apply CH14 OBW fixup */
+		mt7601u_bbp_wr(dev, 4, 0x60);
+		mt7601u_bbp_wr(dev, 178, 0);
+
+		/* Note: vendor code is buggy here for negative values */
+		t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2;
+		t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2;
+	}
+}
+
+static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev,
+				     struct cfg80211_chan_def *chandef)
+{
+#define FREQ_PLAN_REGS	4
+	static const u8 freq_plan[14][FREQ_PLAN_REGS] = {
+		{ 0x99,	0x99,	0x09,	0x50 },
+		{ 0x46,	0x44,	0x0a,	0x50 },
+		{ 0xec,	0xee,	0x0a,	0x50 },
+		{ 0x99,	0x99,	0x0b,	0x50 },
+		{ 0x46,	0x44,	0x08,	0x51 },
+		{ 0xec,	0xee,	0x08,	0x51 },
+		{ 0x99,	0x99,	0x09,	0x51 },
+		{ 0x46,	0x44,	0x0a,	0x51 },
+		{ 0xec,	0xee,	0x0a,	0x51 },
+		{ 0x99,	0x99,	0x0b,	0x51 },
+		{ 0x46,	0x44,	0x08,	0x52 },
+		{ 0xec,	0xee,	0x08,	0x52 },
+		{ 0x99,	0x99,	0x09,	0x52 },
+		{ 0x33,	0x33,	0x0b,	0x52 },
+	};
+	struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = {
+		{ 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 },
+	};
+	struct mt76_reg_pair bbp_settings[3] = {
+		{ 62, 0x37 - dev->ee->lna_gain },
+		{ 63, 0x37 - dev->ee->lna_gain },
+		{ 64, 0x37 - dev->ee->lna_gain },
+	};
+
+	struct ieee80211_channel *chan = chandef->chan;
+	enum nl80211_channel_type chan_type =
+		cfg80211_get_chandef_type(chandef);
+	struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
+	int chan_idx;
+	bool chan_ext_below;
+	u8 bw;
+	int i, ret;
+
+	bw = MT_BW_20;
+	chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS);
+	chan_idx = chan->hw_value - 1;
+
+	if (chandef->width == NL80211_CHAN_WIDTH_40) {
+		bw = MT_BW_40;
+
+		if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS)
+			chan_idx -= 2;
+		else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS)
+			chan_idx += 2;
+		else
+			dev_err(dev->dev, "Error: invalid 40MHz channel!!\n");
+	}
+
+	if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) {
+		dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n",
+			bw, chan_ext_below);
+
+		mt7601u_bbp_set_bw(dev, bw);
+
+		mt7601u_bbp_set_ctrlch(dev, chan_ext_below);
+		mt7601u_mac_set_ctrlch(dev, chan_ext_below);
+		dev->chan_ext_below = chan_ext_below;
+	}
+
+	for (i = 0; i < FREQ_PLAN_REGS; i++)
+		channel_freq_plan[i].value = freq_plan[chan_idx][i];
+
+	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF,
+				      channel_freq_plan, FREQ_PLAN_REGS);
+	if (ret)
+		return ret;
+
+	mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f,
+		    dev->ee->chan_pwr[chan_idx] & 0x3f);
+
+	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
+				      bbp_settings, ARRAY_SIZE(bbp_settings));
+	if (ret)
+		return ret;
+
+	mt7601u_vco_cal(dev);
+	mt7601u_bbp_set_bw(dev, bw);
+	ret = mt7601u_set_bw_filter(dev, false);
+	if (ret)
+		return ret;
+
+	mt7601u_apply_ch14_fixup(dev, chan->hw_value);
+	mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 |
+					 int_to_s6(t->ofdm[0].bw20) << 16 |
+					 int_to_s6(t->cck[1].bw20) << 8 |
+					 int_to_s6(t->cck[0].bw20));
+
+	if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
+		mt7601u_agc_reset(dev);
+
+	dev->chandef = *chandef;
+
+	return 0;
+}
+
+int mt7601u_phy_set_channel(struct mt7601u_dev *dev,
+			    struct cfg80211_chan_def *chandef)
+{
+	int ret;
+
+	cancel_delayed_work_sync(&dev->cal_work);
+	cancel_delayed_work_sync(&dev->freq_cal.work);
+
+	mutex_lock(&dev->hw_atomic_mutex);
+	ret = __mt7601u_phy_set_channel(dev, chandef);
+	mutex_unlock(&dev->hw_atomic_mutex);
+	if (ret)
+		return ret;
+
+	if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
+		return 0;
+
+	ieee80211_queue_delayed_work(dev->hw, &dev->cal_work,
+				     MT_CALIBRATE_INTERVAL);
+	if (dev->freq_cal.enabled)
+		ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work,
+					     MT_FREQ_CAL_INIT_DELAY);
+	return 0;
+}
+
+#define BBP_R47_FLAG		GENMASK(2, 0)
+#define BBP_R47_F_TSSI		0
+#define BBP_R47_F_PKT_T		1
+#define BBP_R47_F_TX_RATE	2
+#define BBP_R47_F_TEMP		4
+/**
+ * mt7601u_bbp_r47_get - read value through BBP R47/R49 pair
+ * @dev:	pointer to adapter structure
+ * @reg:	value of BBP R47 before the operation
+ * @flag:	one of the BBP_R47_F_* flags
+ *
+ * Convenience helper for reading values through BBP R47/R49 pair.
+ * Takes old value of BBP R47 as @reg, because callers usually have it
+ * cached already.
+ *
+ * Return: value of BBP R49.
+ */
+static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag)
+{
+	flag |= reg & ~BBP_R47_FLAG;
+	mt7601u_bbp_wr(dev, 47, flag);
+	usleep_range(500, 700);
+	return mt7601u_bbp_rr(dev, 49);
+}
+
+static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev)
+{
+	u8 bbp_val, temp;
+	u32 rf_bp, rf_set;
+	int i;
+
+	rf_set = mt7601u_rr(dev, MT_RF_SETTING_0);
+	rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0);
+
+	mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
+	mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010);
+	mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010);
+
+	bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10);
+
+	mt7601u_bbp_wr(dev, 22, 0x40);
+
+	for (i = 100; i && (bbp_val & 0x10); i--)
+		bbp_val = mt7601u_bbp_rr(dev, 47);
+
+	temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP);
+
+	mt7601u_bbp_wr(dev, 22, 0);
+
+	bbp_val = mt7601u_bbp_rr(dev, 21);
+	bbp_val |= 0x02;
+	mt7601u_bbp_wr(dev, 21, bbp_val);
+	bbp_val &= ~0x02;
+	mt7601u_bbp_wr(dev, 21, bbp_val);
+
+	mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
+	mt7601u_wr(dev, MT_RF_SETTING_0, rf_set);
+	mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp);
+
+	trace_read_temp(dev, temp);
+	return temp;
+}
+
+static s8 mt7601u_read_temp(struct mt7601u_dev *dev)
+{
+	int i;
+	u8 val;
+	s8 temp;
+
+	val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10);
+
+	/* Note: this rarely succeeds, temp can change even if it fails. */
+	for (i = 100; i && (val & 0x10); i--)
+		val = mt7601u_bbp_rr(dev, 47);
+
+	temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP);
+
+	trace_read_temp(dev, temp);
+	return temp;
+}
+
+static void mt7601u_rxdc_cal(struct mt7601u_dev *dev)
+{
+	static const struct mt76_reg_pair intro[] = {
+		{ 158, 0x8d }, { 159, 0xfc },
+		{ 158, 0x8c }, { 159, 0x4c },
+	}, outro[] = {
+		{ 158, 0x8d }, { 159, 0xe0 },
+	};
+	u32 mac_ctrl;
+	int i, ret;
+
+	mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
+	mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX);
+
+	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
+				      intro, ARRAY_SIZE(intro));
+	if (ret)
+		dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret);
+
+	for (i = 20; i; i--) {
+		usleep_range(300, 500);
+
+		mt7601u_bbp_wr(dev, 158, 0x8c);
+		if (mt7601u_bbp_rr(dev, 159) == 0x0c)
+			break;
+	}
+	if (!i)
+		dev_err(dev->dev, "%s timed out\n", __func__);
+
+	mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0);
+
+	ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
+				      outro, ARRAY_SIZE(outro));
+	if (ret)
+		dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret);
+
+	mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl);
+}
+
+void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev)
+{
+	mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp);
+
+	mt7601u_rxdc_cal(dev);
+}
+
+/* Note: function copied from vendor driver */
+static s16 lin2dBd(u16 linear)
+{
+	short exp = 0;
+	unsigned int mantisa;
+	int app, dBd;
+
+	if (WARN_ON(!linear))
+		return -10000;
+
+	mantisa = linear;
+
+	exp = fls(mantisa) - 16;
+	if (exp > 0)
+		mantisa >>= exp;
+	else
+		mantisa <<= abs(exp);
+
+	if (mantisa <= 0xb800)
+		app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600);
+	else
+		app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00);
+	if (app < 0)
+		app = 0;
+
+	dBd = ((15 + exp) << 15) + app;
+	dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7);
+	dBd = (dBd >> 10);
+
+	return dBd;
+}
+
+static void
+mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db)
+{
+	struct tssi_data *d = &dev->ee->tssi_data;
+	int init_offset;
+
+	init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10;
+
+	mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP,
+		 int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP);
+}
+
+static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev)
+{
+	u8 rf_vga, rf_mixer, bbp_r47;
+	int i, j;
+	s8 res[4];
+	s16 tssi_init_db, tssi_init_hvga_db;
+
+	mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030);
+	mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030);
+	mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0);
+
+	mt7601u_bbp_wr(dev, 58, 0);
+	mt7601u_bbp_wr(dev, 241, 0x2);
+	mt7601u_bbp_wr(dev, 23, 0x8);
+	bbp_r47 = mt7601u_bbp_rr(dev, 47);
+
+	/* Set VGA gain */
+	rf_vga = mt7601u_rf_rr(dev, 5, 3);
+	mt7601u_rf_wr(dev, 5, 3, 8);
+
+	/* Mixer disable */
+	rf_mixer = mt7601u_rf_rr(dev, 4, 39);
+	mt7601u_rf_wr(dev, 4, 39, 0);
+
+	for (i = 0; i < 4; i++) {
+		mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0);
+
+		mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02);
+		mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11);
+
+		/* BBP TSSI initial and soft reset */
+		mt7601u_bbp_wr(dev, 22, 0);
+		mt7601u_bbp_wr(dev, 244, 0);
+
+		mt7601u_bbp_wr(dev, 21, 1);
+		udelay(1);
+		mt7601u_bbp_wr(dev, 21, 0);
+
+		/* TSSI measurement */
+		mt7601u_bbp_wr(dev, 47, 0x50);
+		mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40);
+
+		for (j = 20; j; j--)
+			if (!(mt7601u_bbp_rr(dev, 47) & 0x10))
+				break;
+		if (!j)
+			dev_err(dev->dev, "%s timed out\n", __func__);
+
+		/* TSSI read */
+		mt7601u_bbp_wr(dev, 47, 0x40);
+		res[i] = mt7601u_bbp_rr(dev, 49);
+	}
+
+	tssi_init_db = lin2dBd((short)res[1] - res[0]);
+	tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4);
+	dev->tssi_init = res[0];
+	dev->tssi_init_hvga = res[2];
+	dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db;
+
+	dev_dbg(dev->dev,
+		"TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n",
+		dev->tssi_init, tssi_init_db, dev->tssi_init_hvga,
+		tssi_init_hvga_db, dev->tssi_init_hvga_offset_db);
+
+	mt7601u_bbp_wr(dev, 22, 0);
+	mt7601u_bbp_wr(dev, 244, 0);
+
+	mt7601u_bbp_wr(dev, 21, 1);
+	udelay(1);
+	mt7601u_bbp_wr(dev, 21, 0);
+
+	mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
+	mt7601u_wr(dev, MT_RF_SETTING_0, 0);
+
+	mt7601u_rf_wr(dev, 5, 3, rf_vga);
+	mt7601u_rf_wr(dev, 4, 39, rf_mixer);
+	mt7601u_bbp_wr(dev, 47, bbp_r47);
+
+	mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db);
+}
+
+static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on)
+{
+	int ret, temp, hi_temp = 400, lo_temp = -200;
+
+	temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE;
+	dev->curr_temp = temp;
+
+	/* DPD Calibration */
+	if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) {
+		dev->dpd_temp = temp;
+
+		ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp);
+		if (ret)
+			return ret;
+
+		mt7601u_vco_cal(dev);
+
+		dev_dbg(dev->dev, "Recalibrate DPD\n");
+	}
+
+	/* PLL Lock Protect */
+	if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */
+		dev->pll_lock_protect =  true;
+
+		mt7601u_rf_wr(dev, 4, 4, 6);
+		mt7601u_rf_clear(dev, 4, 10, 0x30);
+
+		dev_dbg(dev->dev, "PLL lock protect on - too cold\n");
+	} else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */
+		dev->pll_lock_protect = false;
+
+		mt7601u_rf_wr(dev, 4, 4, 0);
+		mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10);
+
+		dev_dbg(dev->dev, "PLL lock protect off\n");
+	}
+
+	if (on) {
+		hi_temp -= 50;
+		lo_temp -= 50;
+	}
+
+	/* BBP CR for H, L, N temperature */
+	if (temp > hi_temp)
+		return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high");
+	else if (temp > lo_temp)
+		return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal");
+	else
+		return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low");
+}
+
+/* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */
+static int mt7601u_current_tx_power(struct mt7601u_dev *dev)
+{
+	return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1];
+}
+
+static bool mt7601u_use_hvga(struct mt7601u_dev *dev)
+{
+	return !(mt7601u_current_tx_power(dev) > 20);
+}
+
+static s16
+mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate)
+{
+	static const s16 decode_tb[] = { 0, 8847, -5734, -5734 };
+	u32 reg;
+
+	switch (phy_mode) {
+	case MT_PHY_TYPE_OFDM:
+		tx_rate += 4;
+	case MT_PHY_TYPE_CCK:
+		reg = dev->rf_pa_mode[0];
+		break;
+	default:
+		reg = dev->rf_pa_mode[1];
+		break;
+	}
+
+	return decode_tb[(reg >> (tx_rate * 2)) & 0x3];
+}
+
+static struct mt7601u_tssi_params
+mt7601u_tssi_params_get(struct mt7601u_dev *dev)
+{
+	static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 };
+	static const int static_power[4] = { 0, -49152, -98304, 49152 };
+	struct mt7601u_tssi_params p;
+	u8 bbp_r47, pkt_type, tx_rate;
+	struct power_per_rate *rate_table;
+
+	bbp_r47 = mt7601u_bbp_rr(dev, 47);
+
+	p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI);
+	dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP);
+	pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T);
+
+	p.trgt_power = mt7601u_current_tx_power(dev);
+
+	switch (pkt_type & 0x03) {
+	case MT_PHY_TYPE_CCK:
+		tx_rate = (pkt_type >> 4) & 0x03;
+		rate_table = dev->ee->power_rate_table.cck;
+		break;
+
+	case MT_PHY_TYPE_OFDM:
+		tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07];
+		rate_table = dev->ee->power_rate_table.ofdm;
+		break;
+
+	default:
+		tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE);
+		tx_rate &= 0x7f;
+		rate_table = dev->ee->power_rate_table.ht;
+		break;
+	}
+
+	if (dev->bw == MT_BW_20)
+		p.trgt_power += rate_table[tx_rate / 2].bw20;
+	else
+		p.trgt_power += rate_table[tx_rate / 2].bw40;
+
+	p.trgt_power <<= 12;
+
+	dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power);
+
+	p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03,
+						   tx_rate);
+
+	/* Channel 14, cck, bw20 */
+	if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) {
+		if (mt7601u_bbp_rr(dev, 4) & 0x20)
+			p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830;
+		else
+			p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576;
+	}
+
+	p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03];
+
+	p.trgt_power += dev->ee->tssi_data.tx0_delta_offset;
+
+	dev_dbg(dev->dev,
+		"tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n",
+		p.tssi0, p.trgt_power, dev->raw_temp, pkt_type);
+
+	return p;
+}
+
+static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev)
+{
+	return !(mt7601u_bbp_rr(dev, 47) & 0x10);
+}
+
+static int mt7601u_tssi_cal(struct mt7601u_dev *dev)
+{
+	struct mt7601u_tssi_params params;
+	int curr_pwr, diff_pwr;
+	char tssi_offset;
+	s8 tssi_init;
+	s16 tssi_m_dc, tssi_db;
+	bool hvga;
+	u32 val;
+
+	if (!dev->ee->tssi_enabled)
+		return 0;
+
+	hvga = mt7601u_use_hvga(dev);
+	if (!dev->tssi_read_trig)
+		return mt7601u_mcu_tssi_read_kick(dev, hvga);
+
+	if (!mt7601u_tssi_read_ready(dev))
+		return 0;
+
+	params = mt7601u_tssi_params_get(dev);
+
+	tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init);
+	tssi_m_dc = params.tssi0 - tssi_init;
+	tssi_db = lin2dBd(tssi_m_dc);
+	dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n",
+		tssi_m_dc, tssi_db, hvga);
+
+	if (dev->chandef.chan->hw_value < 5)
+		tssi_offset = dev->ee->tssi_data.offset[0];
+	else if (dev->chandef.chan->hw_value < 9)
+		tssi_offset = dev->ee->tssi_data.offset[1];
+	else
+		tssi_offset = dev->ee->tssi_data.offset[2];
+
+	if (hvga)
+		tssi_db -= dev->tssi_init_hvga_offset_db;
+
+	curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9);
+	diff_pwr = params.trgt_power - curr_pwr;
+	dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr);
+
+	if (params.tssi0 > 126 && diff_pwr > 0) {
+		dev_err(dev->dev, "Error: TSSI upper saturation\n");
+		diff_pwr = 0;
+	}
+	if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) {
+		dev_err(dev->dev, "Error: TSSI lower saturation\n");
+		diff_pwr = 0;
+	}
+
+	if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 &&
+	    (abs(diff_pwr) > abs(dev->prev_pwr_diff) ||
+	     (diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff)))
+		diff_pwr = 0;
+	else
+		dev->prev_pwr_diff = diff_pwr;
+
+	diff_pwr += (diff_pwr > 0) ? 2048 : -2048;
+	diff_pwr /= 4096;
+
+	dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr);
+
+	val = mt7601u_rr(dev, MT_TX_ALC_CFG_1);
+	curr_pwr = s6_to_int(MT76_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val));
+	diff_pwr += curr_pwr;
+	val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr);
+	mt7601u_wr(dev, MT_TX_ALC_CFG_1, val);
+
+	return mt7601u_mcu_tssi_read_kick(dev, hvga);
+}
+
+static u8 mt7601u_agc_default(struct mt7601u_dev *dev)
+{
+	return (dev->ee->lna_gain - 8) * 2 + 0x34;
+}
+
+static void mt7601u_agc_reset(struct mt7601u_dev *dev)
+{
+	u8 agc = mt7601u_agc_default(dev);
+
+	mt7601u_bbp_wr(dev, 66,	agc);
+}
+
+void mt7601u_agc_save(struct mt7601u_dev *dev)
+{
+	dev->agc_save = mt7601u_bbp_rr(dev, 66);
+}
+
+void mt7601u_agc_restore(struct mt7601u_dev *dev)
+{
+	mt7601u_bbp_wr(dev, 66, dev->agc_save);
+}
+
+static void mt7601u_agc_tune(struct mt7601u_dev *dev)
+{
+	u8 val = mt7601u_agc_default(dev);
+
+	if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
+		return;
+
+	/* Note: only in STA mode and not dozing; perhaps do this only if
+	 *	 there is enough rssi updates since last run?
+	 *	 Rssi updates are only on beacons and U2M so should work...
+	 */
+	spin_lock_bh(&dev->con_mon_lock);
+	if (dev->avg_rssi <= -70)
+		val -= 0x20;
+	else if (dev->avg_rssi <= -60)
+		val -= 0x10;
+	spin_unlock_bh(&dev->con_mon_lock);
+
+	if (val != mt7601u_bbp_rr(dev, 66))
+		mt7601u_bbp_wr(dev, 66, val);
+
+	/* TODO: also if lost a lot of beacons try resetting
+	 *       (see RTMPSetAGCInitValue() call in mlme.c).
+	 */
+}
+
+static void mt7601u_phy_calibrate(struct work_struct *work)
+{
+	struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev,
+					    cal_work.work);
+
+	mt7601u_agc_tune(dev);
+	mt7601u_tssi_cal(dev);
+	/* If TSSI calibration was run it already updated temperature. */
+	if (!dev->ee->tssi_enabled)
+		dev->raw_temp = mt7601u_read_temp(dev);
+	mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */
+
+	ieee80211_queue_delayed_work(dev->hw, &dev->cal_work,
+				     MT_CALIBRATE_INTERVAL);
+}
+
+static unsigned long
+__mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode)
+{
+	u8 activate_threshold, deactivate_threshold;
+
+	trace_freq_cal_offset(dev, phy_mode, last_offset);
+
+	/* No beacons received - reschedule soon */
+	if (last_offset == MT_FREQ_OFFSET_INVALID)
+		return MT_FREQ_CAL_ADJ_INTERVAL;
+
+	switch (phy_mode) {
+	case MT_PHY_TYPE_CCK:
+		activate_threshold = 19;
+		deactivate_threshold = 5;
+		break;
+	case MT_PHY_TYPE_OFDM:
+		activate_threshold = 102;
+		deactivate_threshold = 32;
+		break;
+	case MT_PHY_TYPE_HT:
+	case MT_PHY_TYPE_HT_GF:
+		activate_threshold = 82;
+		deactivate_threshold = 20;
+		break;
+	default:
+		WARN_ON(1);
+		return MT_FREQ_CAL_CHECK_INTERVAL;
+	}
+
+	if (abs(last_offset) >= activate_threshold)
+		dev->freq_cal.adjusting = true;
+	else if (abs(last_offset) <= deactivate_threshold)
+		dev->freq_cal.adjusting = false;
+
+	if (!dev->freq_cal.adjusting)
+		return MT_FREQ_CAL_CHECK_INTERVAL;
+
+	if (last_offset > deactivate_threshold) {
+		if (dev->freq_cal.freq > 0)
+			dev->freq_cal.freq--;
+		else
+			dev->freq_cal.adjusting = false;
+	} else if (last_offset < -deactivate_threshold) {
+		if (dev->freq_cal.freq < 0xbf)
+			dev->freq_cal.freq++;
+		else
+			dev->freq_cal.adjusting = false;
+	}
+
+	trace_freq_cal_adjust(dev, dev->freq_cal.freq);
+	mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq);
+	mt7601u_vco_cal(dev);
+
+	return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL :
+					 MT_FREQ_CAL_CHECK_INTERVAL;
+}
+
+static void mt7601u_phy_freq_cal(struct work_struct *work)
+{
+	struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev,
+					       freq_cal.work.work);
+	s8 last_offset;
+	u8 phy_mode;
+	unsigned long delay;
+
+	spin_lock_bh(&dev->con_mon_lock);
+	last_offset = dev->bcn_freq_off;
+	phy_mode = dev->bcn_phy_mode;
+	spin_unlock_bh(&dev->con_mon_lock);
+
+	delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode);
+	ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay);
+
+	spin_lock_bh(&dev->con_mon_lock);
+	dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
+	spin_unlock_bh(&dev->con_mon_lock);
+}
+
+void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev,
+			       struct ieee80211_bss_conf *info)
+{
+	if (!info->assoc)
+		cancel_delayed_work_sync(&dev->freq_cal.work);
+
+	/* Start/stop collecting beacon data */
+	spin_lock_bh(&dev->con_mon_lock);
+	ether_addr_copy(dev->ap_bssid, info->bssid);
+	dev->avg_rssi = 0;
+	dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
+	spin_unlock_bh(&dev->con_mon_lock);
+
+	dev->freq_cal.freq = dev->ee->rf_freq_off;
+	dev->freq_cal.enabled = info->assoc;
+	dev->freq_cal.adjusting = false;
+
+	if (info->assoc)
+		ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work,
+					     MT_FREQ_CAL_INIT_DELAY);
+}
+
+static int mt7601u_init_cal(struct mt7601u_dev *dev)
+{
+	u32 mac_ctrl;
+	int ret;
+
+	dev->raw_temp = mt7601u_read_bootup_temp(dev);
+	dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) *
+		MT_EE_TEMPERATURE_SLOPE;
+	dev->dpd_temp = dev->curr_temp;
+
+	mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
+
+	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0);
+	if (ret)
+		return ret;
+
+	ret = mt7601u_rf_rr(dev, 0, 4);
+	if (ret < 0)
+		return ret;
+	ret |= 0x80;
+	ret = mt7601u_rf_wr(dev, 0, 4, ret);
+	if (ret)
+		return ret;
+	msleep(2);
+
+	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0);
+	if (ret)
+		return ret;
+
+	mt7601u_rxdc_cal(dev);
+
+	ret = mt7601u_set_bw_filter(dev, true);
+	if (ret)
+		return ret;
+	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0);
+	if (ret)
+		return ret;
+	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0);
+	if (ret)
+		return ret;
+	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0);
+	if (ret)
+		return ret;
+	ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp);
+	if (ret)
+		return ret;
+
+	mt7601u_rxdc_cal(dev);
+
+	mt7601u_tssi_dc_gain_cal(dev);
+
+	mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl);
+
+	mt7601u_temp_comp(dev, true);
+
+	return 0;
+}
+
+int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw)
+{
+	u32 val, old;
+
+	if (bw == dev->bw) {
+		/* Vendor driver does the rmc even when no change is needed. */
+		mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10);
+
+		return 0;
+	}
+	dev->bw = bw;
+
+	/* Stop MAC for the time of bw change */
+	old = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
+	val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX);
+	mt7601u_wr(dev, MT_MAC_SYS_CTRL, val);
+	mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX,
+		  0, 500000);
+
+	mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10);
+
+	mt7601u_wr(dev, MT_MAC_SYS_CTRL, old);
+
+	return mt7601u_load_bbp_temp_table_bw(dev);
+}
+
+/**
+ * mt7601u_set_rx_path - set rx path in BBP
+ * @dev:	pointer to adapter structure
+ * @path:	rx path to set values are 0-based
+ */
+void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path)
+{
+	mt7601u_bbp_rmw(dev, 3, 0x18, path << 3);
+}
+
+/**
+ * mt7601u_set_tx_dac - set which tx DAC to use
+ * @dev:	pointer to adapter structure
+ * @path:	DAC index, values are 0-based
+ */
+void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac)
+{
+	mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3);
+}
+
+int mt7601u_phy_init(struct mt7601u_dev *dev)
+{
+	int ret;
+
+	dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0);
+	dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1);
+
+	ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off);
+	if (ret)
+		return ret;
+	ret = mt7601u_write_reg_pairs(dev, 0, rf_central,
+				      ARRAY_SIZE(rf_central));
+	if (ret)
+		return ret;
+	ret = mt7601u_write_reg_pairs(dev, 0, rf_channel,
+				      ARRAY_SIZE(rf_channel));
+	if (ret)
+		return ret;
+	ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga));
+	if (ret)
+		return ret;
+
+	ret = mt7601u_init_cal(dev);
+	if (ret)
+		return ret;
+
+	dev->prev_pwr_diff = 100;
+
+	INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate);
+	INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal);
+
+	return 0;
+}