qtnfmac: implement cfg80211 channel_switch handler

This patch implements cfg80211 channel_switch handler enabling CSA
channel-switch procedure.

Driver performs only basic validation of the requested new channel
and then sends command to firmware. Beacon IEs are not sent since
beacon update is handled by firmware.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Avinash Patil <avinashp@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 58 insertions, 2 deletions

diff --git a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
index d47050934f00..ac8fdc1db482 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c
@@ -812,6 +812,59 @@ qtnf_get_channel(struct wiphy *wiphy, struct wireless_dev *wdev,
 	return 0;
 }
 
+static int qtnf_channel_switch(struct wiphy *wiphy, struct net_device *dev,
+			       struct cfg80211_csa_settings *params)
+{
+	struct qtnf_wmac *mac = wiphy_priv(wiphy);
+	struct qtnf_vif *vif = qtnf_netdev_get_priv(dev);
+	int ret;
+
+	pr_debug("%s: chan(%u) count(%u) radar(%u) block_tx(%u)\n", dev->name,
+		 params->chandef.chan->hw_value, params->count,
+		 params->radar_required, params->block_tx);
+
+	switch (vif->wdev.iftype) {
+	case NL80211_IFTYPE_AP:
+		if (!(vif->bss_status & QTNF_STATE_AP_START)) {
+			pr_warn("AP not started on %s\n", dev->name);
+			return -ENOTCONN;
+		}
+		break;
+	default:
+		pr_err("unsupported vif type (%d) on %s\n",
+		       vif->wdev.iftype, dev->name);
+		return -EOPNOTSUPP;
+	}
+
+	if (vif->vifid != 0) {
+		if (!(mac->status & QTNF_MAC_CSA_ACTIVE))
+			return -EOPNOTSUPP;
+
+		if (!cfg80211_chandef_identical(&params->chandef,
+						&mac->csa_chandef))
+			return -EINVAL;
+
+		return 0;
+	}
+
+	if (!cfg80211_chandef_valid(&params->chandef)) {
+		pr_err("%s: invalid channel\n", dev->name);
+		return -EINVAL;
+	}
+
+	if (cfg80211_chandef_identical(&params->chandef, &mac->chandef)) {
+		pr_err("%s: switch request to the same channel\n", dev->name);
+		return -EALREADY;
+	}
+
+	ret = qtnf_cmd_send_chan_switch(mac, params);
+	if (ret)
+		pr_warn("%s: failed to switch to channel (%u)\n",
+			dev->name, params->chandef.chan->hw_value);
+
+	return ret;
+}
+
 static struct cfg80211_ops qtn_cfg80211_ops = {
 	.add_virtual_intf	= qtnf_add_virtual_intf,
 	.change_virtual_intf	= qtnf_change_virtual_intf,
@@ -834,7 +887,8 @@ static struct cfg80211_ops qtn_cfg80211_ops = {
 	.connect		= qtnf_connect,
 	.disconnect		= qtnf_disconnect,
 	.dump_survey		= qtnf_dump_survey,
-	.get_channel		= qtnf_get_channel
+	.get_channel		= qtnf_get_channel,
+	.channel_switch		= qtnf_channel_switch
 };
 
 static void qtnf_cfg80211_reg_notifier(struct wiphy *wiphy_in,
@@ -981,6 +1035,7 @@ int qtnf_wiphy_register(struct qtnf_hw_info *hw_info, struct qtnf_wmac *mac)
 
 	wiphy->iface_combinations = iface_comb;
 	wiphy->n_iface_combinations = 1;
+	wiphy->max_num_csa_counters = 2;
 
 	/* Initialize cipher suits */
 	wiphy->cipher_suites = qtnf_cipher_suites;
@@ -988,7 +1043,8 @@ int qtnf_wiphy_register(struct qtnf_hw_info *hw_info, struct qtnf_wmac *mac)
 	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
 	wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
 			WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD |
-			WIPHY_FLAG_AP_UAPSD;
+			WIPHY_FLAG_AP_UAPSD |
+			WIPHY_FLAG_HAS_CHANNEL_SWITCH;
 
 	wiphy->probe_resp_offload = NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
 				    NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2;