mac80211: separate encoding/bandwidth from flags

We currently use a lot of flags that are mutually incompatible,
separate this out into actual encoding and bandwidth enum values.

Much of this again done with spatch, with manual post-editing,
mostly to add the switch statements and get rid of the conversions.

@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_80MHZ
+status->bw = RATE_INFO_BW_80
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_40MHZ
+status->bw = RATE_INFO_BW_40
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_20MHZ
+status->bw = RATE_INFO_BW_20
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_160MHZ
+status->bw = RATE_INFO_BW_160
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_5MHZ
+status->bw = RATE_INFO_BW_5
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_10MHZ
+status->bw = RATE_INFO_BW_10

@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_VHT
+status->encoding = RX_ENC_VHT
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_HT
+status->encoding = RX_ENC_HT
@@
expression status;
@@
-status.enc_flags |= RX_ENC_FLAG_VHT
+status.encoding = RX_ENC_VHT
@@
expression status;
@@
-status.enc_flags |= RX_ENC_FLAG_HT
+status.encoding = RX_ENC_HT

@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_HT)
+(status->encoding == RX_ENC_HT)
@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_VHT)
+(status->encoding == RX_ENC_VHT)

@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_5MHZ)
+(status->bw == RATE_INFO_BW_5)
@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_10MHZ)
+(status->bw == RATE_INFO_BW_10)
@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_40MHZ)
+(status->bw == RATE_INFO_BW_40)
@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_80MHZ)
+(status->bw == RATE_INFO_BW_80)
@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_160MHZ)
+(status->bw == RATE_INFO_BW_160)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 3 insertions, 1 deletions

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index 8a4640d2ead0..357c0941aaad 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -825,7 +825,7 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp)
 	rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
 	if (rxdesc.rate_mode == RATE_MODE_HT_MIX ||
 	    rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD)
-		rxdesc.enc_flags |= RX_ENC_FLAG_HT;
+		rxdesc.encoding = RX_ENC_HT;
 
 	/*
 	 * Check if this is a beacon, and more frames have been
@@ -866,6 +866,8 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp)
 	rx_status->signal = rxdesc.rssi;
 	rx_status->flag = rxdesc.flags;
 	rx_status->enc_flags = rxdesc.enc_flags;
+	rx_status->encoding = rxdesc.encoding;
+	rx_status->bw = rxdesc.bw;
 	rx_status->antenna = rt2x00dev->link.ant.active.rx;
 
 	ieee80211_rx_ni(rt2x00dev->hw, entry->skb);