rsi: add coex support

With BT support, driver has to handle two streams of data
(i.e. wlan and BT). Actual coex implementation is in firmware.
Coex module just schedule the packets to firmware by taking them
from the corresponding paths.

Structures for module and protocol operations are introduced for
this purpose. Protocol operations structure is global structure
which can be shared among different modules. Move initialization
of coex and operating mode values to rsi_91x_init().

Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 37 insertions, 1 deletions

diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index 0413af88cd25..641c388b5666 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -20,6 +20,7 @@
 #include <linux/firmware.h>
 #include "rsi_mgmt.h"
 #include "rsi_common.h"
+#include "rsi_coex.h"
 #include "rsi_hal.h"
 
 u32 rsi_zone_enabled = /* INFO_ZONE |
@@ -160,8 +161,15 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
 
 		switch (queueno) {
 		case RSI_COEX_Q:
-			rsi_mgmt_pkt_recv(common, (frame_desc + offset));
+#ifdef CONFIG_RSI_COEX
+			if (common->coex_mode > 1)
+				rsi_coex_recv_pkt(common, frame_desc + offset);
+			else
+#endif
+				rsi_mgmt_pkt_recv(common,
+						  (frame_desc + offset));
 			break;
+
 		case RSI_WIFI_DATA_Q:
 			skb = rsi_prepare_skb(common,
 					      (frame_desc + offset),
@@ -217,6 +225,15 @@ static void rsi_tx_scheduler_thread(struct rsi_common *common)
 	complete_and_exit(&common->tx_thread.completion, 0);
 }
 
+#ifdef CONFIG_RSI_COEX
+enum rsi_host_intf rsi_get_host_intf(void *priv)
+{
+	struct rsi_common *common = (struct rsi_common *)priv;
+
+	return common->priv->rsi_host_intf;
+}
+#endif
+
 /**
  * rsi_91x_init() - This function initializes os interface operations.
  * @void: Void.
@@ -251,6 +268,7 @@ struct rsi_hw *rsi_91x_init(void)
 	mutex_init(&common->mutex);
 	mutex_init(&common->tx_lock);
 	mutex_init(&common->rx_lock);
+	mutex_init(&common->tx_bus_mutex);
 
 	if (rsi_create_kthread(common,
 			       &common->tx_thread,
@@ -265,6 +283,19 @@ struct rsi_hw *rsi_91x_init(void)
 	timer_setup(&common->roc_timer, rsi_roc_timeout, 0);
 	init_completion(&common->wlan_init_completion);
 	common->init_done = true;
+
+	common->coex_mode = RSI_DEV_COEX_MODE_WIFI_ALONE;
+	common->oper_mode = RSI_DEV_OPMODE_WIFI_ALONE;
+	adapter->device_model = RSI_DEV_9113;
+#ifdef CONFIG_RSI_COEX
+	if (common->coex_mode > 1) {
+		if (rsi_coex_attach(common)) {
+			rsi_dbg(ERR_ZONE, "Failed to init coex module\n");
+			goto err;
+		}
+	}
+#endif
+
 	return adapter;
 
 err:
@@ -294,6 +325,11 @@ void rsi_91x_deinit(struct rsi_hw *adapter)
 
 	common->init_done = false;
 
+#ifdef CONFIG_RSI_COEX
+	if (common->coex_mode > 1)
+		rsi_coex_detach(common);
+#endif
+
 	kfree(common);
 	kfree(adapter->rsi_dev);
 	kfree(adapter);