Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...

1 files changed, 55 insertions, 29 deletions

diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
index df2a63b1f15c..8e2a95c486b0 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
@@ -69,20 +69,37 @@ int rsi_sdio_master_access_msword(struct rsi_hw *adapter, u16 ms_word)
 static int rsi_process_pkt(struct rsi_common *common)
 {
 	struct rsi_hw *adapter = common->priv;
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	u8 num_blks = 0;
 	u32 rcv_pkt_len = 0;
 	int status = 0;
+	u8 value = 0;
 
-	status = rsi_sdio_read_register(adapter,
-					SDIO_RX_NUM_BLOCKS_REG,
-					&num_blks);
+	num_blks = ((adapter->interrupt_status & 1) |
+			((adapter->interrupt_status >> RECV_NUM_BLOCKS) << 1));
 
-	if (status) {
-		rsi_dbg(ERR_ZONE,
-			"%s: Failed to read pkt length from the card:\n",
-			__func__);
-		return status;
+	if (!num_blks) {
+		status = rsi_sdio_read_register(adapter,
+						SDIO_RX_NUM_BLOCKS_REG,
+						&value);
+		if (status) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed to read pkt length from the card:\n",
+				__func__);
+			return status;
+		}
+		num_blks = value & 0x1f;
+	}
+
+	if (dev->write_fail == 2)
+		rsi_sdio_ack_intr(common->priv, (1 << MSDU_PKT_PENDING));
+
+	if (unlikely(!num_blks)) {
+		dev->write_fail = 2;
+		return -1;
 	}
+
 	rcv_pkt_len = (num_blks * 256);
 
 	common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL);
@@ -213,7 +230,7 @@ void rsi_interrupt_handler(struct rsi_hw *adapter)
 	dev->rx_info.sdio_int_counter++;
 
 	do {
-		mutex_lock(&common->tx_rxlock);
+		mutex_lock(&common->rx_lock);
 		status = rsi_sdio_read_register(common->priv,
 						RSI_FN1_INT_REGISTER,
 						&isr_status);
@@ -221,14 +238,15 @@ void rsi_interrupt_handler(struct rsi_hw *adapter)
 			rsi_dbg(ERR_ZONE,
 				"%s: Failed to Read Intr Status Register\n",
 				__func__);
-			mutex_unlock(&common->tx_rxlock);
+			mutex_unlock(&common->rx_lock);
 			return;
 		}
+		adapter->interrupt_status = isr_status;
 
 		if (isr_status == 0) {
 			rsi_set_event(&common->tx_thread.event);
 			dev->rx_info.sdio_intr_status_zero++;
-			mutex_unlock(&common->tx_rxlock);
+			mutex_unlock(&common->rx_lock);
 			return;
 		}
 
@@ -241,10 +259,12 @@ void rsi_interrupt_handler(struct rsi_hw *adapter)
 
 			switch (isr_type) {
 			case BUFFER_AVAILABLE:
-				dev->rx_info.watch_bufferfull_count = 0;
-				dev->rx_info.buffer_full = false;
-				dev->rx_info.semi_buffer_full = false;
-				dev->rx_info.mgmt_buffer_full = false;
+				status = rsi_sdio_check_buffer_status(adapter,
+								      0);
+				if (status < 0)
+					rsi_dbg(ERR_ZONE,
+						"%s: Failed to check buffer status\n",
+						__func__);
 				rsi_sdio_ack_intr(common->priv,
 						  (1 << PKT_BUFF_AVAILABLE));
 				rsi_set_event(&common->tx_thread.event);
@@ -252,7 +272,7 @@ void rsi_interrupt_handler(struct rsi_hw *adapter)
 				rsi_dbg(ISR_ZONE,
 					"%s: ==> BUFFER_AVAILABLE <==\n",
 					__func__);
-				dev->rx_info.buf_available_counter++;
+				dev->buff_status_updated = true;
 				break;
 
 			case FIRMWARE_ASSERT_IND:
@@ -286,7 +306,7 @@ void rsi_interrupt_handler(struct rsi_hw *adapter)
 					rsi_dbg(ERR_ZONE,
 						"%s: Failed to read pkt\n",
 						__func__);
-					mutex_unlock(&common->tx_rxlock);
+					mutex_unlock(&common->rx_lock);
 					return;
 				}
 				break;
@@ -301,28 +321,28 @@ void rsi_interrupt_handler(struct rsi_hw *adapter)
 			}
 			isr_status ^= BIT(isr_type - 1);
 		} while (isr_status);
-		mutex_unlock(&common->tx_rxlock);
+		mutex_unlock(&common->rx_lock);
 	} while (1);
 }
 
-/**
- * rsi_sdio_read_buffer_status_register() - This function is used to the read
- *					    buffer status register and set
- *					    relevant fields in
- *					    rsi_91x_sdiodev struct.
- * @adapter: Pointer to the driver hw structure.
- * @q_num: The Q number whose status is to be found.
- *
- * Return: status: -1 on failure or else queue full/stop is indicated.
+/* This function is used to read buffer status register and
+ * set relevant fields in rsi_91x_sdiodev struct.
  */
-int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num)
+int rsi_sdio_check_buffer_status(struct rsi_hw *adapter, u8 q_num)
 {
 	struct rsi_common *common = adapter->priv;
 	struct rsi_91x_sdiodev *dev =
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	u8 buf_status = 0;
 	int status = 0;
+	static int counter = 4;
+
+	if (!dev->buff_status_updated && counter) {
+		counter--;
+		goto out;
+	}
 
+	dev->buff_status_updated = false;
 	status = rsi_sdio_read_register(common->priv,
 					RSI_DEVICE_BUFFER_STATUS_REGISTER,
 					&buf_status);
@@ -357,10 +377,16 @@ int rsi_sdio_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num)
 		dev->rx_info.semi_buffer_full = false;
 	}
 
+	if (dev->rx_info.mgmt_buffer_full || dev->rx_info.buf_full_counter)
+		counter = 1;
+	else
+		counter = 4;
+
+out:
 	if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full))
 		return QUEUE_FULL;
 
-	if (dev->rx_info.buffer_full)
+	if ((q_num < MGMT_SOFT_Q) && (dev->rx_info.buffer_full))
 		return QUEUE_FULL;
 
 	return QUEUE_NOT_FULL;