Merge tag 'wireless-drivers-next-for-davem-2017-06-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.13

New features and bug fixes to quite a few different drivers, but
nothing really special standing out.

What makes me happy that we have now more vendors actively
contributing to upstream drivers. In this pull request we have patches
from Broadcom, Intel, Qualcomm, Realtek and Redpine Signals, and I
still have patches from Marvell and Quantenna pending in patchwork. Now
that's something comparing to how things looked 11 years ago in Jeff
Garzik's "State of the Union: Wireless" email:

https://lkml.org/lkml/2006/1/5/671

Major changes:

wil6210

* add low level RF sector interface via nl80211 vendor commands

* add module parameter ftm_mode to load separate firmware for factory
  testing

* support devices with different PCIe bar size

* add support for PCIe D3hot in system suspend

* remove ioctl interface which should not be in a wireless driver

ath10k

* go back to using dma_alloc_coherent() for firmware scratch memory

* add per chain RSSI reporting

brcmfmac

* add support multi-scheduled scan

* add scheduled scan support for specified BSSIDs

* add support for brcm43430 revision 0

wlcore

* add wil1285 compatible

rsi

* add RS9113 USB support

iwlwifi

* FW API documentation improvements (for tools and htmldoc)

* continuing work for the new A000 family

* bump the maximum supported FW API to 31

* improve the differentiation between 8000, 9000 and A000 families
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 76 insertions, 0 deletions

diff --git a/drivers/net/wireless/rsi/rsi_mgmt.h b/drivers/net/wireless/rsi/rsi_mgmt.h
index dfbf7a50269b..dcb6db728cbd 100644
--- a/drivers/net/wireless/rsi/rsi_mgmt.h
+++ b/drivers/net/wireless/rsi/rsi_mgmt.h
@@ -205,6 +205,7 @@ enum cmd_frame_type {
 	CW_MODE_REQ,
 	PER_CMD_PKT,
 	ANT_SEL_FRAME = 0x20,
+	COMMON_DEV_CONFIG = 0x28,
 	RADIO_PARAMS_UPDATE = 0x29
 };
 
@@ -282,6 +283,76 @@ struct rsi_radio_caps {
 	__le16 preamble_type;
 } __packed;
 
+/* ULP GPIO flags */
+#define RSI_GPIO_MOTION_SENSOR_ULP_WAKEUP	BIT(0)
+#define RSI_GPIO_SLEEP_IND_FROM_DEVICE		BIT(1)
+#define RSI_GPIO_2_ULP				BIT(2)
+#define RSI_GPIO_PUSH_BUTTON_ULP_WAKEUP		BIT(3)
+
+/* SOC GPIO flags */
+#define RSI_GPIO_0_PSPI_CSN_0			BIT(0)
+#define RSI_GPIO_1_PSPI_CSN_1			BIT(1)
+#define RSI_GPIO_2_HOST_WAKEUP_INTR		BIT(2)
+#define RSI_GPIO_3_PSPI_DATA_0			BIT(3)
+#define RSI_GPIO_4_PSPI_DATA_1			BIT(4)
+#define RSI_GPIO_5_PSPI_DATA_2			BIT(5)
+#define RSI_GPIO_6_PSPI_DATA_3			BIT(6)
+#define RSI_GPIO_7_I2C_SCL			BIT(7)
+#define RSI_GPIO_8_I2C_SDA			BIT(8)
+#define RSI_GPIO_9_UART1_RX			BIT(9)
+#define RSI_GPIO_10_UART1_TX			BIT(10)
+#define RSI_GPIO_11_UART1_RTS_I2S_CLK		BIT(11)
+#define RSI_GPIO_12_UART1_CTS_I2S_WS		BIT(12)
+#define RSI_GPIO_13_DBG_UART_RX_I2S_DIN		BIT(13)
+#define RSI_GPIO_14_DBG_UART_RX_I2S_DOUT	BIT(14)
+#define RSI_GPIO_15_LP_WAKEUP_BOOT_BYPASS	BIT(15)
+#define RSI_GPIO_16_LED_0			BIT(16)
+#define RSI_GPIO_17_BTCOEX_WLAN_ACT_EXT_ANT_SEL	BIT(17)
+#define RSI_GPIO_18_BTCOEX_BT_PRIO_EXT_ANT_SEL	BIT(18)
+#define RSI_GPIO_19_BTCOEX_BT_ACT_EXT_ON_OFF	BIT(19)
+#define RSI_GPIO_20_RF_RESET			BIT(20)
+#define RSI_GPIO_21_SLEEP_IND_FROM_DEVICE	BIT(21)
+
+#define RSI_UNUSED_SOC_GPIO_BITMAP (RSI_GPIO_9_UART1_RX | \
+				    RSI_GPIO_10_UART1_TX | \
+				    RSI_GPIO_11_UART1_RTS_I2S_CLK | \
+				    RSI_GPIO_12_UART1_CTS_I2S_WS | \
+				    RSI_GPIO_13_DBG_UART_RX_I2S_DIN | \
+				    RSI_GPIO_14_DBG_UART_RX_I2S_DOUT | \
+				    RSI_GPIO_15_LP_WAKEUP_BOOT_BYPASS | \
+				    RSI_GPIO_17_BTCOEX_WLAN_ACT_EXT_ANT_SEL | \
+				    RSI_GPIO_18_BTCOEX_BT_PRIO_EXT_ANT_SEL | \
+				    RSI_GPIO_19_BTCOEX_BT_ACT_EXT_ON_OFF | \
+				    RSI_GPIO_21_SLEEP_IND_FROM_DEVICE)
+
+#define RSI_UNUSED_ULP_GPIO_BITMAP (RSI_GPIO_MOTION_SENSOR_ULP_WAKEUP | \
+				    RSI_GPIO_SLEEP_IND_FROM_DEVICE | \
+				    RSI_GPIO_2_ULP | \
+				    RSI_GPIO_PUSH_BUTTON_ULP_WAKEUP);
+struct rsi_config_vals {
+	__le16 len_qno;
+	u8 pkt_type;
+	u8 misc_flags;
+	__le16 reserved1[6];
+	u8 lp_ps_handshake;
+	u8 ulp_ps_handshake;
+	u8 sleep_config_params; /* 0 for no handshake,
+				 * 1 for GPIO based handshake,
+				 * 2 packet handshake
+				 */
+	u8 unused_ulp_gpio;
+	__le32 unused_soc_gpio_bitmap;
+	u8 ext_pa_or_bt_coex_en;
+	u8 opermode;
+	u8 wlan_rf_pwr_mode;
+	u8 bt_rf_pwr_mode;
+	u8 zigbee_rf_pwr_mode;
+	u8 driver_mode;
+	u8 region_code;
+	u8 antenna_sel_val;
+	u8 reserved2[16];
+} __packed;
+
 static inline u32 rsi_get_queueno(u8 *addr, u16 offset)
 {
 	return (le16_to_cpu(*(__le16 *)&addr[offset]) & 0x7000) >> 12;
@@ -307,6 +378,11 @@ static inline u8 rsi_get_channel(u8 *addr)
 	return *(char *)(addr + 15);
 }
 
+static inline void rsi_set_len_qno(__le16 *addr, u16 len, u8 qno)
+{
+	*addr = cpu_to_le16(len | ((qno & 7) << 12));
+}
+
 int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg);
 int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode,
 			     u8 vap_status);