Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
Please pull this batch of wireless updates intended for 3.15!

For the mac80211 bits, Johannes says:

"This has a whole bunch of bugfixes for things that went into -next
previously as well as some other bugfixes I didn't want to rush into
3.14 at this point. The rest of it is some cleanups and a few small
features, the biggest of which is probably Janusz's regulatory DFS CAC
time code."

For the Bluetooth bits, Gustavo says:

"One more pull request to 3.15. This is mostly and bug fix pull request, it
contains several fixes and clean up all over the tree, plus some small new
features."

For the NFC bits, Samuel says:

"This is the NFC pull request for 3.15. With this one we have:

- Support for ISO 15693 a.k.a. NFC vicinity a.k.a. Type 5 tags. ISO
  15693 are long range (1 - 2 meters) vicinity tags/cards. The kernel
  now supports those through the NFC netlink and digital APIs.

- Support for TI's trf7970a chipset. This chipset relies on the NFC
  digital layer and the driver currently supports type 2, 4A and 5 tags.

- Support for NXP's pn544 secure firmare download. The pn544 C3 chipsets
  relies on a different firmware download protocal than the C2 one. We
  now support both and use the right one depending on the version we
  detect at runtime.

- Support for 4A tags from the NFC digital layer.

- A bunch of cleanups and minor fixes from Axel Lin and Thierry Escande."

For the iwlwifi bits, Emmanuel says:

"We were sending a host command while the mutex wasn't held. This
led to hard-to-catch races."

And...

"I have a fix for a "merge damage" which is not really a merge
damage: it enables scheduled scan which has been disabled in
wireless.git. Since you merged wireless.git into wireless-next.git,
this can now be fixed in wireless-next.git.

Besides this, Alex made a workaround for a hardware bug. This fix
allows us to consume less power in S3. Arik and Eliad continue to
work on D0i3 which is a run-time power saving feature. Eliad also
contributes a few bits to the rate scaling logic to which Eyal adds his
own contribution. Avri dives deep in the power code - newer firmware
will allow to enable power save in newer scenarios. Johannes made a few
clean-ups. I have the regular amount of BT Coex boring stuff. I disable
uAPSD since we identified firmware bugs that cause packet loss. One
thing that do stand out is the udev event that we now send when the
FW asserts. I hope it will allow us to debug the FW more easily."

Also included is one last iwlwifi pull for a build breakage fix...

For the Atheros bits, Kalle says:

"Michal now did some optimisations and was able to improve throughput by
100 Mbps on our MIPS based AP135 platform. Chun-Yeow added some
workarounds to be able to better use ad-hoc mode. Ben improved log
messages and added support for MSDU chaining. And, as usual, also some
smaller fixes."

Beyond that...

Andrea Merello continues his rtl8180 refactoring, in preparation for
a long-awaited rtl8187 driver.  We get a new driver (rsi) for the
RS9113 chip, from Fariya Fatima.  And, of course, we get the usual
round of updates for ath9k, brcmfmac, mwifiex, wil6210, etc. as well.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 225 insertions, 101 deletions

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 959e699702e8..0b405b8c8d70 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -148,7 +148,8 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 			rx_status.antenna = (flags2 >> 15) & 1;
 			rx_status.rate_idx = (flags >> 20) & 0xF;
 			agc = (flags2 >> 17) & 0x7F;
-			if (priv->r8185) {
+
+			if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
 				if (rx_status.rate_idx > 3)
 					signal = 90 - clamp_t(u8, agc, 25, 90);
 				else
@@ -288,7 +289,7 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 		   (ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
 		   skb->len;
 
-	if (priv->r8185)
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
 		tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
 			    RTL818X_TX_DESC_FLAG_NO_ENC;
 
@@ -305,7 +306,7 @@ static void rtl8180_tx(struct ieee80211_hw *dev,
 		rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len,
 						      info);
 
-	if (!priv->r8185) {
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
 		unsigned int remainder;
 
 		plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
@@ -370,6 +371,36 @@ void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 }
 
+static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
+			    u32 rates_mask)
+{
+	struct rtl8180_priv *priv = dev->priv;
+
+	u8 max, min;
+	u16 reg;
+
+	max = fls(rates_mask) - 1;
+	min = ffs(rates_mask) - 1;
+
+	switch (priv->chip_family) {
+
+	case RTL818X_CHIP_FAMILY_RTL8180:
+		/* in 8180 this is NOT a BITMAP */
+		reg = rtl818x_ioread16(priv, &priv->map->BRSR);
+		reg &= ~3;
+		reg |= max;
+		rtl818x_iowrite16(priv, &priv->map->BRSR, reg);
+
+		break;
+
+	case RTL818X_CHIP_FAMILY_RTL8185:
+		/* in 8185 this is a BITMAP */
+		rtl818x_iowrite16(priv, &priv->map->BRSR, rates_mask);
+		rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (max << 4) | min);
+		break;
+	}
+}
+
 static int rtl8180_init_hw(struct ieee80211_hw *dev)
 {
 	struct rtl8180_priv *priv = dev->priv;
@@ -412,7 +443,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 
 	rtl818x_iowrite8(priv, &priv->map->MSR, 0);
 
-	if (!priv->r8185)
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
 		rtl8180_set_anaparam(priv, priv->anaparam);
 
 	rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
@@ -425,7 +456,7 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 	reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
 	rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
-	if (priv->r8185) {
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) {
 		reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
 		rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
 	}
@@ -437,12 +468,9 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 
 	rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
 
-	if (priv->r8185) {
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
 		rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
-		rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
-
-		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
 
 		/* TODO: set ClkRun enable? necessary? */
 		reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
@@ -452,7 +480,6 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 		rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
 		rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 	} else {
-		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1);
 		rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
 
 		rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
@@ -460,8 +487,18 @@ static int rtl8180_init_hw(struct ieee80211_hw *dev)
 	}
 
 	priv->rf->init(dev);
-	if (priv->r8185)
-		rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+
+	/* default basic rates are 1,2 Mbps for rtl8180. 1,2,6,9,12,18,24 Mbps
+	 * otherwise. bitmask 0x3 and 0x01f3 respectively.
+	 * NOTE: currenty rtl8225 RF code changes basic rates, so we need to do
+	 * this after rf init.
+	 * TODO: try to find out whether RF code really needs to do this..
+	 */
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+		rtl8180_conf_basic_rates(dev, 0x3);
+	else
+		rtl8180_conf_basic_rates(dev, 0x1f3);
+
 	return 0;
 }
 
@@ -624,7 +661,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	      RTL818X_RX_CONF_BROADCAST |
 	      RTL818X_RX_CONF_NICMAC;
 
-	if (priv->r8185)
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185)
 		reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
 	else {
 		reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
@@ -636,7 +673,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	priv->rx_conf = reg;
 	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
 
-	if (priv->r8185) {
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
 
 		/* CW is not on per-packet basis.
@@ -668,7 +705,9 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	reg |= (6 << 21 /* MAX TX DMA */) |
 	       RTL818X_TX_CONF_NO_ICV;
 
-	if (priv->r8185)
+
+
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180)
 		reg &= ~RTL818X_TX_CONF_PROBE_DTS;
 	else
 		reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
@@ -827,6 +866,72 @@ static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
 	return 0;
 }
 
+static int rtl8180_conf_tx(struct ieee80211_hw *dev,
+			    struct ieee80211_vif *vif, u16 queue,
+			    const struct ieee80211_tx_queue_params *params)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 cw_min, cw_max;
+
+	/* nothing to do ? */
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+		return 0;
+
+	cw_min = fls(params->cw_min);
+	cw_max = fls(params->cw_max);
+
+	rtl818x_iowrite8(priv, &priv->map->CW_VAL, (cw_max << 4) | cw_min);
+
+	return 0;
+}
+
+static void rtl8180_conf_erp(struct ieee80211_hw *dev,
+			    struct ieee80211_bss_conf *info)
+{
+	struct rtl8180_priv *priv = dev->priv;
+	u8 sifs, difs;
+	int eifs;
+	u8 hw_eifs;
+
+	/* TODO: should we do something ? */
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180)
+		return;
+
+	/* I _hope_ this means 10uS for the HW.
+	 * In reference code it is 0x22 for
+	 * both rtl8187L and rtl8187SE
+	 */
+	sifs = 0x22;
+
+	if (info->use_short_slot)
+		priv->slot_time = 9;
+	else
+		priv->slot_time = 20;
+
+	/* 10 is SIFS time in uS */
+	difs = 10 + 2 * priv->slot_time;
+	eifs = 10 + difs + priv->ack_time;
+
+	/* HW should use 4uS units for EIFS (I'm sure for rtl8185)*/
+	hw_eifs = DIV_ROUND_UP(eifs, 4);
+
+
+	rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time);
+	rtl818x_iowrite8(priv, &priv->map->SIFS, sifs);
+	rtl818x_iowrite8(priv, &priv->map->DIFS, difs);
+
+	/* from reference code. set ack timeout reg = eifs reg */
+	rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, hw_eifs);
+
+	/* rtl8187/rtl8185 HW bug. After EIFS is elapsed,
+	 * the HW still wait for DIFS.
+	 * HW uses 4uS units for EIFS.
+	 */
+	hw_eifs = DIV_ROUND_UP(eifs - difs, 4);
+
+	rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs);
+}
+
 static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 				     struct ieee80211_vif *vif,
 				     struct ieee80211_bss_conf *info,
@@ -854,8 +959,23 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
 	}
 
-	if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
-		priv->rf->conf_erp(dev, info);
+	if (changed & BSS_CHANGED_BASIC_RATES)
+		rtl8180_conf_basic_rates(dev, info->basic_rates);
+
+	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) {
+
+		/* when preamble changes, acktime duration changes, and erp must
+		 * be recalculated. ACK time is calculated at lowest rate.
+		 * Since mac80211 include SIFS time we remove it (-10)
+		 */
+		priv->ack_time =
+			le16_to_cpu(ieee80211_generic_frame_duration(dev,
+					priv->vif,
+					IEEE80211_BAND_2GHZ, 10,
+					&priv->rates[0])) - 10;
+
+		rtl8180_conf_erp(dev, info);
+	}
 
 	if (changed & BSS_CHANGED_BEACON_ENABLED)
 		vif_priv->enable_beacon = info->enable_beacon;
@@ -913,6 +1033,7 @@ static const struct ieee80211_ops rtl8180_ops = {
 	.remove_interface	= rtl8180_remove_interface,
 	.config			= rtl8180_config,
 	.bss_info_changed	= rtl8180_bss_info_changed,
+	.conf_tx		= rtl8180_conf_tx,
 	.prepare_multicast	= rtl8180_prepare_multicast,
 	.configure_filter	= rtl8180_configure_filter,
 	.get_tsf		= rtl8180_get_tsf,
@@ -920,8 +1041,7 @@ static const struct ieee80211_ops rtl8180_ops = {
 
 static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
 {
-	struct ieee80211_hw *dev = eeprom->data;
-	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_priv *priv = eeprom->data;
 	u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
 
 	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
@@ -932,8 +1052,7 @@ static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
 
 static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
 {
-	struct ieee80211_hw *dev = eeprom->data;
-	struct rtl8180_priv *priv = dev->priv;
+	struct rtl8180_priv *priv = eeprom->data;
 	u8 reg = 2 << 6;
 
 	if (eeprom->reg_data_in)
@@ -950,6 +1069,67 @@ static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
 	udelay(10);
 }
 
+static void rtl8180_eeprom_read(struct rtl8180_priv *priv)
+{
+	struct eeprom_93cx6 eeprom;
+	int eeprom_cck_table_adr;
+	u16 eeprom_val;
+	int i;
+
+	eeprom.data = priv;
+	eeprom.register_read = rtl8180_eeprom_register_read;
+	eeprom.register_write = rtl8180_eeprom_register_write;
+	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
+		eeprom.width = PCI_EEPROM_WIDTH_93C66;
+	else
+		eeprom.width = PCI_EEPROM_WIDTH_93C46;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			RTL818X_EEPROM_CMD_PROGRAM);
+	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+	udelay(10);
+
+	eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
+	eeprom_val &= 0xFF;
+	priv->rf_type = eeprom_val;
+
+	eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
+	priv->csthreshold = eeprom_val >> 8;
+
+	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)priv->mac_addr, 3);
+
+	eeprom_cck_table_adr = 0x10;
+
+	/* CCK TX power */
+	for (i = 0; i < 14; i += 2) {
+		u16 txpwr;
+		eeprom_93cx6_read(&eeprom, eeprom_cck_table_adr + (i >> 1),
+				&txpwr);
+		priv->channels[i].hw_value = txpwr & 0xFF;
+		priv->channels[i + 1].hw_value = txpwr >> 8;
+	}
+
+	/* OFDM TX power */
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
+		for (i = 0; i < 14; i += 2) {
+			u16 txpwr;
+			eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
+			priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
+			priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
+		}
+	}
+
+	if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) {
+		__le32 anaparam;
+		eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
+		priv->anaparam = le32_to_cpu(anaparam);
+		eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			RTL818X_EEPROM_CMD_NORMAL);
+}
+
 static int rtl8180_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *id)
 {
@@ -957,12 +1137,9 @@ static int rtl8180_probe(struct pci_dev *pdev,
 	struct rtl8180_priv *priv;
 	unsigned long mem_addr, mem_len;
 	unsigned int io_addr, io_len;
-	int err, i;
-	struct eeprom_93cx6 eeprom;
+	int err;
 	const char *chip_name, *rf_name = NULL;
 	u32 reg;
-	u16 eeprom_val;
-	u8 mac_addr[ETH_ALEN];
 
 	err = pci_enable_device(pdev);
 	if (err) {
@@ -1052,15 +1229,22 @@ static int rtl8180_probe(struct pci_dev *pdev,
 	switch (reg) {
 	case RTL818X_TX_CONF_R8180_ABCD:
 		chip_name = "RTL8180";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180;
 		break;
+
 	case RTL818X_TX_CONF_R8180_F:
 		chip_name = "RTL8180vF";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180;
 		break;
+
 	case RTL818X_TX_CONF_R8185_ABC:
 		chip_name = "RTL8185";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
 		break;
+
 	case RTL818X_TX_CONF_R8185_D:
 		chip_name = "RTL8185vD";
+		priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185;
 		break;
 	default:
 		printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
@@ -1068,27 +1252,14 @@ static int rtl8180_probe(struct pci_dev *pdev,
 		goto err_iounmap;
 	}
 
-	priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC;
-	if (priv->r8185) {
+	if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) {
 		priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
 		pci_try_set_mwi(pdev);
 	}
 
-	eeprom.data = dev;
-	eeprom.register_read = rtl8180_eeprom_register_read;
-	eeprom.register_write = rtl8180_eeprom_register_write;
-	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
-		eeprom.width = PCI_EEPROM_WIDTH_93C66;
-	else
-		eeprom.width = PCI_EEPROM_WIDTH_93C46;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM);
-	rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-	udelay(10);
+	rtl8180_eeprom_read(priv);
 
-	eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
-	eeprom_val &= 0xFF;
-	switch (eeprom_val) {
+	switch (priv->rf_type) {
 	case 1:	rf_name = "Intersil";
 		break;
 	case 2:	rf_name = "RFMD";
@@ -1106,7 +1277,7 @@ static int rtl8180_probe(struct pci_dev *pdev,
 		break;
 	default:
 		printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
-		       pci_name(pdev), eeprom_val);
+		       pci_name(pdev), priv->rf_type);
 		goto err_iounmap;
 	}
 
@@ -1116,42 +1287,12 @@ static int rtl8180_probe(struct pci_dev *pdev,
 		goto err_iounmap;
 	}
 
-	eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
-	priv->csthreshold = eeprom_val >> 8;
-	if (!priv->r8185) {
-		__le32 anaparam;
-		eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
-		priv->anaparam = le32_to_cpu(anaparam);
-		eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
-	}
-
-	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)mac_addr, 3);
-	if (!is_valid_ether_addr(mac_addr)) {
+	if (!is_valid_ether_addr(priv->mac_addr)) {
 		printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
 		       " randomly generated MAC addr\n", pci_name(pdev));
-		eth_random_addr(mac_addr);
+		eth_random_addr(priv->mac_addr);
 	}
-	SET_IEEE80211_PERM_ADDR(dev, mac_addr);
-
-	/* CCK TX power */
-	for (i = 0; i < 14; i += 2) {
-		u16 txpwr;
-		eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr);
-		priv->channels[i].hw_value = txpwr & 0xFF;
-		priv->channels[i + 1].hw_value = txpwr >> 8;
-	}
-
-	/* OFDM TX power */
-	if (priv->r8185) {
-		for (i = 0; i < 14; i += 2) {
-			u16 txpwr;
-			eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
-			priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
-			priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
-		}
-	}
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+	SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr);
 
 	spin_lock_init(&priv->lock);
 
@@ -1163,7 +1304,7 @@ static int rtl8180_probe(struct pci_dev *pdev,
 	}
 
 	wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n",
-		   mac_addr, chip_name, priv->rf->name);
+		   priv->mac_addr, chip_name, priv->rf->name);
 
 	return 0;
 
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index 30523314da43..26383d77fc3a 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -81,12 +81,18 @@ struct rtl8180_priv {
 	struct ieee80211_supported_band band;
 	struct pci_dev *pdev;
 	u32 rx_conf;
+	u8 slot_time;
+	u16 ack_time;
 
-	int r8185;
+	enum {
+		RTL818X_CHIP_FAMILY_RTL8180,
+		RTL818X_CHIP_FAMILY_RTL8185,
+	} chip_family;
 	u32 anaparam;
 	u16 rfparam;
 	u8 csthreshold;
-
+	u8 mac_addr[ETH_ALEN];
+	u8 rf_type;
 	/* sequence # */
 	u16 seqno;
 };
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
index d60a5f399022..1c0fe238d995 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
@@ -730,32 +730,11 @@ static void rtl8225_rf_set_channel(struct ieee80211_hw *dev,
 	msleep(10);
 }
 
-static void rtl8225_rf_conf_erp(struct ieee80211_hw *dev,
-				struct ieee80211_bss_conf *info)
-{
-	struct rtl8180_priv *priv = dev->priv;
-
-	if (info->use_short_slot) {
-		rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
-		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
-		rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
-		rtl818x_iowrite8(priv, &priv->map->EIFS, 81);
-		rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
-	} else {
-		rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
-		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x44);
-		rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
-		rtl818x_iowrite8(priv, &priv->map->EIFS, 81);
-		rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
-	}
-}
-
 static const struct rtl818x_rf_ops rtl8225_ops = {
 	.name		= "rtl8225",
 	.init		= rtl8225_rf_init,
 	.stop		= rtl8225_rf_stop,
 	.set_chan	= rtl8225_rf_set_channel,
-	.conf_erp	= rtl8225_rf_conf_erp,
 };
 
 static const struct rtl818x_rf_ops rtl8225z2_ops = {
@@ -763,7 +742,6 @@ static const struct rtl818x_rf_ops rtl8225z2_ops = {
 	.init		= rtl8225z2_rf_init,
 	.stop		= rtl8225_rf_stop,
 	.set_chan	= rtl8225_rf_set_channel,
-	.conf_erp	= rtl8225_rf_conf_erp,
 };
 
 const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *dev)
diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h
index fa7f7f61ea26..1815b15d03b1 100644
--- a/drivers/net/wireless/rtl818x/rtl818x.h
+++ b/drivers/net/wireless/rtl818x/rtl818x.h
@@ -192,7 +192,6 @@ struct rtl818x_rf_ops {
 	void (*init)(struct ieee80211_hw *);
 	void (*stop)(struct ieee80211_hw *);
 	void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *);
-	void (*conf_erp)(struct ieee80211_hw *, struct ieee80211_bss_conf *);
 	u8 (*calc_rssi)(u8 agc, u8 sq);
 };